Tourism development works at the ancient Shukdev Temple and the Banyan Tree in Shukteerth, District Muzaffarnagar.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 15 in foundation and plinth level all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including supply of all materials, labour T&P etc complete as per direction of E/I

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 10.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including supply of all materials, labour T&P etc complete as per direction of E/I

Providing and installing decorative metal Door of finished size consisting of CNC laser-cut jaali panels fabricated from 2.5 mm thick mild steel sheet in an architecturally approved pattern & iron frame fabricated from MS square/ rectangular sections as requires, welded, and finished with red oxide primer followed by two coats of PU paint or powder-coated finish in approved color. CNC sheet edges shall be ground and deburred for smoothness, and the complete system shall be installed at site with precision alignment, concealed anchoring, and neat finishing. The scope includes material, fabrication, finishing, installation, and all labour, consumables, and hardware necessary to complete the work as per approved drawings and under the direction of the Engineer-in-Charge.

Providing and installing decorative metal partition of finished size 14'6" × 8'0", consisting of CNC laser-cut jaali panels fabricated from 2mm thick mild steel sheet in an architecturally approved pattern. The panels shall be mounted within a structural iron frame fabricated from 50mm × 50 mm MS square sections, welded, and finished with red oxide primer followed by two coats of PU paint or powder-coated finish in approved color. CNC sheet edges shall be ground and deburred for smoothness, and the complete system shall be installed at site with precision alignment, concealed anchoring, and neat finishing. The scope includes material, fabrication, finishing, installation, and all labour, consumables, and hardware necessary to complete the work as per approved drawings and under the direction of the Engineer-in-Charge.

Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.Red sand stone complete the work as per approved drawings and under the direction of the Engineer-in-Charge.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/ sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured.

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand) including supply of all materials, labour T&P etc complete as per direction of E/I

15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand) including supply of all materials, labour T&P etc complete as per direction of E/I