Extension of First Floor in open area near GEM and AM (Phase II) under area proposed CSIR project FTT 080502 at AMPRI, Bhopal.

Amount

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete.

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a approved steel primer & paint all complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

12 mm cement plaster of mix :1:4 (1 cement: 4 sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade(Plastic Paint), having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.and colour. Two or coats.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Labour for shifting of junk material instruments used chemical bottle and appratus and other misclanious work

Brick work with chimny brick of in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and applying multicoat synthetic plaster as per approved design, pattern texture in 2 mm thick on new plastered surface finished in proper line and level as directed by Engineer-in-charge in five coats consisting of composition of four order of application given as under includig all materials, labour and scaffoldings etc. 1) Scrapping of the new surface and applying sealer primer mixed with water in the ratio 1:3 (part sealer primer : 3 part water) and applying by brush @ 0.25 kg/sqm. 2) Applying levelling coat of spectrum rustic fine or equivalent with trwel as a putty finished to generate required texture by trowel. 3) Applying third coat of synthetic plaster with trwel @ 2.5 kg/sqm finished to generate required texture by trwel. 4) Applying two coats of exterior super fine pigmented acrylic wall coating as top coat @ 0.5 kg/sqm in two coats and colours as approved by Engineer-in-charge all up to a height of 10m.

P/F Glazed Aluminium powder coated section in windows three track with sliding shutter two number of glass 4mm and one sliding shutter of mosquito net and doors section including fitting with clip, rubber as required with screws, handles, door stopper hinges, L-drop etc all fittings and fixtures as required for smooth functioning of window, door and as desired by E-in-C.

Providing and fixing roller blind of approved make design in window of required size in approved pattern and design as directed by E-in-C

Providing and fixing granite in window sill and counter platform and steps/ ramp in CM 1:4 including nosing,grinding,polishing etc complete as per site requirement and direction of E-in C

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting rain water guter of suitable size etc. complete.

Shifting of AC including filling of gas and copper pipe upto a length of 5 meter

Providing and fixing SS lock set with keys for Bi-fold glass door 8 to 10 mm thick of approved quality with necessary screws etc. complete.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box/celling rose and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group 'C'.

Wiring for circuit / submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface / recessed PVC conduit as required

2 X 1.5 Sq.mm + 1 X 1.5 Sq.mm earth wire.

2 X 2.5 Sq.mm + 1 X 2.5 Sq.mm earth wire.

2 X 4 Sq.mm + 1 X 4 Sq.mm earth wire.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 15 / 16 & 5 / 6 amps modular socket outlet and 15 / 16 amps modular switch, connection, painting etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" Curve including connections, painting etc. as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make - BEC/Kissan/Kasta/ Supreme/ Sudhakar/ Reliance)

Supplying and fixing follwing modular Switch/Socket on the exixting modular plate & switch box including connections excluding moddular plate etc as required.

3 pin 5/6 Amps Socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Telephone socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including,connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplyiong and Fixing following size/ Modular plate, GI box alongwith modular base & cover plate for modular switchesin recess ets as required

1/2 module

8 module

Supplying and fixing 5 amps to 32 amps rating, 240 volts 'C' series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Triplae pole with neutral

Supplying and fixing of following ways horizantal type , three pole and neutral , Sheet Steel MCB distribution board 415 V surface/recess completed with tinned copper bus bar, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, common neutral link, earth bar, power coated din bar for mounting MCBs (but without MCBs/RCCB's/isolator) as required .

4 Way(4+12) Double Door

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speedcontrol and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree )max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required.

Supplying and Drawing of UTP 4 pair CAT 6 Cable in the executing surface recssed /Steel/PVC conduit,as required

1 run of Cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

3.5 X 35 sq.mm ( 38 mm)

Supplying and fixing DP sheet Steelenclosure on surface/recess along with 25/32 Amps 240 volt "c" curve DP MCB Complete with connection Testing and commissioning etc as required

Supplying and fixing 63 Amp ,four pole 415 Volt MCB in the existing MCB DB Complete with connection , testing and Commissiong etc as required.

Supplying and laying of following size of XLPE insulated and PVC sheathed aluminum conductor armoured power cable of 1.1 KV grade (ISI Mark ) confirming to IS: 7098 (Part-I) 1988 in the existing RCC / Hume / Metal / PVC pipe/ loose loop connection as reqd.

a) 3.5 x 35 Sq mm

Supplying and fixing of RJ-45 Computer socket outlet modular type with GIO box and modular plate i/c making connection etc. as reqd.

Supplying,installation,testing and commissioning of prewired LED compact light fitting of following type complete with all accessories etc. recess/surface/panel/flase ceiling i/c connection with 3 x 1.5 sq. mm FRLS PVC insulated copper conductor wire earthing etc. as reqd.

a) LED BETTEN fittings surface/wall mounted in 4 feet length, 20/22 W 4000 lumens , cuminous efficiency 105 Lum//Watt, cool day light CRI 80, CRCA body , IP20 life L 70, 40 K, PF>0.95, THD<10% with PC glossy diffueser suitable for short circuit & over voltage cut off i/c connection with 1.5 sq. mm FRLS PVC insulated, copper conductor , single core cable & earthing complete etc. as reqd.(philips/Havells/ Crompton/wipro/ RR)

a)supplying and fixing of LED surface mounted downlight 15/18 watt with Lamp complete with connection and testing etc as required as per Havells modal no.GLOWGENXDLS18WLED857S or similar make like havells/ Crompton/philips/wipro)

S N ASSOCIATES (BID ID -755535)