REPAIRS TO VARIOUS UTILITY SERVICES INCLUDING INTERNAL AND EXTERNAL ELECTRIFICATION SUMMER COOLING WINTER APLLIANCES AND EXTERNAL WATER SUPPLY SERVICES AT GANESHKHIND AREA UNDER GE RD PASHAN PUNE

Amount

Material and labour for cleaning of water storage tank above / under ground sump by draining out complete water, scrapping the inner walls of tank with wire brush / brooms, for removing the fungus, algae, soil, sludge mud etc complete including rewashing the inner walls of tank with fresh water to ensure complete cleaning including painting with water proof antifungal epoxy paint and writing on the outer walls of the tank with synthetic enamel paint the date of cleaned, due date of next cleaning of following capacity of reservior all as specified and directed :- Note : (i) Expandable items such as wire brush, brooms cleaning chemical deemed to be included in the quoted rate. (a) Water storage tank/reservior of capacity 30000 to 50,000 gallons for fresh water.

(b) Over head Tank of capacity 100000 Gallons.

Material and labour for spray painting with one coat of synthetic enamel paint to motor and pump set 40 to 75 HP motor including cleaning and preparing of old surface duly scraping old paint and writing SM/MES No.all as specified and directed by Engineer-in-charge.

Material and labour for spray painting of old painted surfaces of pipe 100 to 150 mm dia bore including prepration of old surfaces and applying one coat of synthetic enamel paint of all as directed and required at site and specified.

Material and labour for spray painting of old painted surfaces with one coat synthetic enamel paint to sulice valve and wheel of size 100 to 200 mm dia bore including cleaning with chemical agent and preparing surface duly scraping old paint all as specified and directed .

Material and labour for Overhauling the centrifugel pump set by dismantling the pump set, opening, cleaning, greasing including replacement of spare parts and reassembling after repairs including,metaling,grinding etc. including transpotation, reinstalling back to position and testing complete all as specified and directed for the following capacity of pump set :- Note:-Spares parts to be replaced will be measured and paid for separately as supply only hereinafter under relevent items of the schedule. (I) 30 HP to 75 HP Pump DSM 4 RR/DSM 4 RM/DB 65/20.

Supply only following spare part for 30 to 75 HP Pump DSM 4RR/DSM4 RM /DB 65/20, Pumps(Make:-Kirloskar pump) complete all as specified and directed :- (a) Shaft sleeve.

(b) Shaft sleeve nuts ( set of 4).

(c) Bearing cartridge DE/NDE.

(d) Bearing cover DE/NDE (set of 2) Split gland coupling.

(e) Bearing cap (set of 2)Wear Ring.

(f) Bearing lock nut.

(g) Throat bush (set of 2).

(h) Gland packing 10MMSQ.

(j) DSM 100/36 set of Gaskets.

(k) DSM 100/36 set of 'O' rings.

Disconnecting the electrical and mechnical connection of burnt electrical motor from the site/location including transporting to and from to workshop and material and labour for Rewinding of electrical motor by dismantling and removing the burnt out copper winding wire, cleaning the slots of stator with petrol and brushes, winding with polyster based super enameled copper wire of same guage original one with proper class of insulation including varnishing and heating the coil and remove the air bubbles complete, stator/roter after rewinding, reassembling all parts including reinstalling, connection to original position and testing on full load complete all as shown as directed by Engineer-in-charge and specified for capacity of motor as per following:- Note:-Spares parts to be replaced will be measured and paid for separately as supply only hereinafter under relevent items of the schedule (a) 30 -45 HP three phase motor 415 V .

(b) 75 HP three phase motor 415 V.

Supply only roller ball bearing/Double ball bearing /thrust ball bearing of pump/motor of following catalouge Nos :- (a)6309

Supply only rubber packing sheet 3 mm thick complete all as specified and directed.

Supply and fix in repairs power contactors MNX 110 type with 2NO+2NC ,CP No.CS94137 complete all as specified and directed.

Supply and fixing in replacement unserviceable pressure guage range 0 to 14 Kg/cm2 with 100 mm dia with one stainless steel cock complete all as specified and directed.

Supply and fixing in replacement rubber bush for pin type coupling for any type of pump and motor complete all as specified and directed.

Supply and fixing lead pig for repair of leaking joints complete all as specified and directed.

Supply and fixing spun yarn for repair of leaking joints complete all as specified and directed.

Supply and fixing lead wool for repair of leaking joints complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for taking out/laying for GI/CI pipes and geeting out complete all as specified and directed in:- (a) Soft /loose soil.

(b) Hard/dense soil

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cms spread any type of soil complete all as directed by Engr-in-Charge

Removing excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Dismantling the disturbed valve chamber and material and labour for construction of brick massonary vave chamber of the following size(internal dimensions) including necessary excavation and earth work excavation in any type of soil, PCC(1:4:8), type D2 using 40 mm graded crushed stone aggregates in foundation, brick massonary of wall thickness of 230 mm in cement mortar 1:6 , rendering10mm thick in cement mortar 1:6 internally and externally to a depth of 15 cm below GL, 3 mm thick hinged MS iron cover as sprcified in IS-3950-1979 embedded in PCC with locking arrangment and painting with two coats of synthetic enamel paint over a coat of red oxide primer, PCC(1:2:4) B150 mm thick coping and locking arrangment etc all for 150/200/250 mm dia valve all as specified and directed:- (a) 900mmx900mmx1200 mm

(b) 1200mmx1200mmx1200 mm

Taking down CI water mains including Burning out leaking lead joint in position and removing of old lead as credit to contractor as per sch of credit for the following size complete all as specified and directed by Engineer-in-charge :- (a) 80 mm dia bore of pipe.

(b) 100 mm dia bore of pipe.

(c) 150 mm dia bore of pipe.

Material and labour for for run lead joint for CI pipe/fitting complete with necessary jointing materials such as pig lead and spun yarn, fire wood for jointing of pipes all as specified and directed by Engineer-in-charge for the following sizes:- (a) 80 mm dia bore of pipe.

(b) 100 mm dia bore of pipe.

(c) 150 mm dia bore of pipe.

Cutting existing steel tubing for alterations or additions of fillowing sizes :- (a) 15 mm bore.

(b) 20 mm bore.

(c) 25 mm bore.

(d) 40 mm bore.

(e) 50 mm bore.

Material and labour for screwing existing steel tubing for alterations or additions for following size :- (a) 15 mm dia bore.

(b) 20 mm dia bore.

(c) 25 mm dia bore.

(d) 40 mm dia bore.

(e) 50 mm dia bore.

Taking down old CI//DI/GI water tubing and water connections from trenches/ Wall/ Floor including connected fittings / assessories completed of following all complete all as specified and directed for following size :- (a) 20 mm dia bore. NOTE :- Excavation & Earth work shall be measured and paid for separately.

(b) 25 mm dia bore.

(c) 40 mm dia bore.

(d) 50 mm dia bore.

(e) 80 mm dia bore.

(f) 100 mm dia bore.

(g) 150 mm dia bore.

(h) 200 mm dia

Relaying and refixing the old serviceable CI//DI/MS /GI I pipe after descaling / cleaning complete with the help of water & brush of the following size / bore and connect in old / new positions, laid in trenches, fixed on wall, on floor, including provision of new fittings such as bends, tee, unions, elbows, sockets, etc. complete all as specified and directed for following size :- (a) 20 mm dia bore.

(b) 25 mm dia bore.

(c) 40 mm dia bore.

(d) 50 mm dia bore.

(e) 80 mm dia bore.

(f) 100 mm dia bore.

(g) 150 mm dia bore.

(h) 200 mm dia bore.

Supply and fix galvanised iron tubing medium grade of following size / bore including all fittings such as Tees, bends, elbows, unions, sockets etc. complete all as specified and directed laid in trenches or fixed on walls / floors all as specified and directed :- NOTE : Excavation and earth work shall be measured and paid for separately. (a) 20mm dia bore.

(b) 25mm dia bore.

(c) 40mm dia bore.

(d) 50mm dia bore.

(e) 80mm dia bore.

Material and labour for CI pipes with spigot and socket ends centrifugally cast , Class LA, in any length any type laid in trenches / laid in floors complete all as specified and directed. Note:- Run lead joints and flange joints shall be measured and paid seperately. (a) 100 mm dia bore.

(b) 150 mm dia bore.

Supply and fixing gun metal globe /gate valve with iron wheel head screwed both ends for iron pipe including neceaasry accessories such as nipple,union for GI pipe of the following size:- (a) 15 mm dia bore.

(b) 20 mm dia bore.

(c) 25 mm dia bore.

(d) 40 mm dia bore.

(e) 50 mm dia bore.

Dismantling / taking down unserviceable worn out CI sluice valve with SS Spindle and supply and fix new CI sluice valve heavy duty class PN-1.6 of following size as required at site and as complete all as specified and directed by Engineer-in-charge:- (a) Sluice valve 100 mm dia bore.

(b) Sluice valve 150 mm dia bore.

(c) Sluice valve 200 mm dia bore

Supply and fix in repairs Cast iron Air release valve with two air outlets, confirming to IS 14845 heavy duty of size 80 mm dia bore and fixing in Cast iron water supply mains of size 150 mm dia complete all as specified and directed.

Supply and fix in repairs Foot valve ball type heavy duty suitable for 150 mm dia bore pipe any type and make from suction pipe of pumpset complete all as specified and directed . Make NORMAX or equivalent in Kirlosker / BIR/ Upadhyay.

Material and labour for cutting of Roads, Plinth for removal / laying of pipe and making good the disturbed surfaces as per existing adjoining surfaces complete all as specified and directed. Note: PCC will be measured and paid for separetely.

Material and labour for PCC 1:2:4 type B 1 using 20 mm graded crushed stone aggregate for making good road/foot path/hard standing/drain/ bldg plinth protection and foundation for motors, pumps and starters including necessary form work complete all as specified and directed..

Disconnection of existing water storage tank of PVC/RCC tank of Capacity 500 litres to 750 Litres, at 3.0 m height and above, removal of water if any from the tank and cleaning the bottom and internal periphery of the tank by using wire brushes to remove the Mud, Algae, fungus, etc. without damaging the water tank and finally rinsing the tank by using chlorine / bleaching powder / altoc GP or any other simillar type of disinfectent chemical and re-fixing in the position complete all as specified and directed of following capacity :- Note : Date of cleaning shall be written after cleaning in DD/MM/YY formate with synthetic enamel paint after removing the earlier date if found exisitng.

Supply and fixing in repairs ball valve high pressure of PTMT with epoxy coated luminium rod & high density plastic ball screwed for iron pipe and fixed for the following sizes at any height of building complete all as specified and directed :- (a) for 15mm dia bore pipe.

(b) for 20mm dia bore pipe.

(c) for 25mm dia bore pipe.

Repair of water supply line (Fresh water) with mechanical joint, of CI pipe line of size 80/100/150 mm including taking out the leaked /puncture/cracked existing pipe , cutting of damaged portion of pipe through welding, making rough surfaces smooth and champhered by grinding and than connected through GI pipe jointing material adequate size complete as per site requirement. Note : Testing/commissioning the pipe line on full pressure after complete the job will be carried out and payment will made of this job if found sucess other wise the same will be done against and no extra payment will be made on this account.

Supply and fixing in repairs CI/DI fitting for spigot socketed pipes such as Bends (any type, radius an angle) Tapers any tpe, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branc, `Y' junction, double branch, cross (all sockets or flanged ) collars, caps and plugs, Connecting pieces one end flanged and other socket or spigot and bell mouth pieces one end flanged other end tapering as bell mouth Upto150 mm bore

Material and labour for taking out unserviceable builk water meter Class -B from C.I. Mains and deposited to MES store and Supply and fixing new digital water meter with LED display digital flow rate with- 4-20mA (Non isolated op) Make : BRIO Code-9026 suitable with following:- (a) Display : 2 Line bright 7 segment LED, (b) Meter mounting : Remote type with 6m cable, (c) Transducer body : MS painted, (d) Electrode: SS316, (e) Lining : Hard Rubber, (f) Connection : Flanged End ANSi 150 class (MS painted) size up to 8''-10'' line (250NB), (g) Flow range: 0-800m3/hr, (h) Pressure: up to 10 Bar, temp up to 60 degree Accuracy : + or - 5%, (i) Calibration report of the mete,r (j) Reading delievery facility on mobile phone.

Dismantling and taking down old existing 150mm GI pipe with necessary fittings from suction end at old pump house including Material and labour for 150mm GI pipe heavy grade length 5.5 m and bend 150mm dia including necessary fittings and required welding work complete all as specified and directed.

Taking down carefully Copper aluminium point wiring (light, Fan, Exht Fan, Bell, socket or power point) complete including fixture & fitting such as switches, sockets, power socket, bell, bell push, light fittings, regulator, bracket holder, boards and making good disturbed surfaces of wall and ceiling etc. complete all as specified and directed.

Taking down carefully unserviceable sub main wiring including conduit/casing patti etc.complete all as specified and directed.

Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as directed.

Taking down unserviceable MCCB/ MCB SP/SPN/Isolator of any rating & size complete all as specified and directed.

Material and labour for point wiring complete with single core multi stranded Copper conductor cable of size 1.5 sqmm FRLS PVC insulated unsheathed 1100 volt grade in and including PVC casing capping Tee junction bends etc fixing to wall/roof and PVC switch board / hylam sheet of 3 mm thick in existing M.S. sunken boards of suitable size for housing switch sockets etc including 1.5 sqmm. green FRLS PVC insulated wire for earth continuity complete all as specified and as directed for the followings:- (Switcges and sockets shall be measured and paid for separately) (a) One light point controlled by one ; one way switch.

(b) One Fan/Exhaust point controlled by one ; one way switch.

(c) One 3 pin 5 Amp socket out let controlled by one switch independent board.

(d) One 3 pin 5 Amp socket out let controlled by one switch on same board.

(e) One bell/buzzer point controlled by one push button.

(f) One light point controled by two way switch.

All as per item 99 hereinbefore but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade FRLS single core stranded ( multistoried ) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continues run of FRLS PVC insulated green in colour 2.5 sq mm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and as directed.

Supply and fixing switch piano flush button type , singlepole one way 5 Amps complete all as specified and as directed .

Supply and fixing switch piano flush button type , single pole two way 5 Amps complete all as specified and as directed.

Supply and fixing Bell push flush type SP 5 Amps complete all as specified and as directed.

Supply and fixing switch socket combination out let 5 pin 6 Amps flush type complete all as specified and as directed.

Supply and fixing switch socket out let 2 in 1, 3 pin 5 and 16 Amps flush type Universal complete all as specified and as directed.

S & F ceiling rose ,3 phase ,PVC polycarbonate ,insulated body complete all as specified and as directed.

Supply and fix stepped type elctronic fan regulator 240 V 50 HZ , 100Watts flush type suitable for 1200/1400mm sweep ceiling fan complete including connection and dismantling of unsv regulator complete all as specified and as directed.

Supply and fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and as directed.

Material and labour for for lamp holder pendant/angle type insulated body with back plate complete all as specified and as directed.

Material and labour for sub main wiring using two single core 6 sqmm copper conductor,FRLS cable in including PVC casing caping of suitable size,including one run of FRLS PVC insulated copper earth continuity wire of 6.0 sqmm and connected to earth dolly including cutting chases for concealed conduit wiring complete all as specified and as directed. Note: 2 run of 6 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 6 earth wire and one run of PVC conduit will be measured as one unit.

Material and labour Sub main wiring complete with 2 runs of 2.5 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through PVC cassing and capping / PVC conduit accessories fixed on surface/wall celing etc including provision of 1 run of 2.5 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. Note: 2 run of 2.5 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 2.5 earth wire and one run of PVC conduit will be measured as one unit.

Supply and fixing in repairs of surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver, 20 Watt 230V complete with all accessories internally prewired and provision of flexiable three core copper conductor 23/0.0076 upto 1.5m from celing rose to fitting complete all as specified and as directed. Make: Cat No LUMILINEPLUSB20WLED865SPCSS of Havell's or equivalent in make as specified in appendix 'B' as approved by GE.

Supply and fixing in repairs of surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver, 10 Watt 230V complete with all accessories internally prewired and provision of flexiable three core copper conductor 23/0.0076 upto 1.5mtr from celing rose to fitting complete all as specified and directed by Engr-in-Charge. Make: Cat No LUMILINEPLUSBS10WLED865SPCSS of Havell's or equivalent in make as specified in appendix 'B' as approved by GE.

Supply & fixing in repairs surface mounting round downlight LED 15 watt luminarie complete fitting with all fixing arrangement complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No-ENDURANEOHESURFACEDLS15WLED840S or equivalent in make as specified in appendix 'B' as approved by GE.

Supply & fixing in repairs LED security light fitting 20 watt with pressure dia cast housing, prismatic, polycarbonate diffuser and IP65 protection including 0.6 mtr long 20/25 mm (as per manufacturer standard) dia GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specified and directed by Engr-in-Charge. Make-Havells Cat No ENDURAPEARLSL20WLED757SASYTOPCMP or equivalent in make as specified in appendix 'B' as approved by GE.

Supply and fixing in replacement of VTPN DB including MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and metal door including connection with aluminium thimbles as required complete all as specified and directed. Make Cat No-607913 of Legrand or equivalant or equivalent in make as specified in appendix 'B' as approved by GE.

Supply & fix in repairs sheet metal enclosure MCB distribution board. Single pole & neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection with metal door complete with appropriate size bus bar and neutral link,all as specified and directed. Make : Legrand Cat No-607711 or equivalent in make as specified in appendix 'B' as approved by GE.

Material and labour for for MCCB 4 pole, 415 volts,TMA type, 63 amps with breaking capacity 25KA and fixed on existing LT panel board including electrical connection as per site requirment complete all as specified and as directed.

Supply and fixing MCB SPN 20-40 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as directed and specified.

Supply and fixing MCB SP 3-32 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as directed and specified.

Material and labour in repairs for Earthing complete with galvansied steel earth plate electrode 600mmx600mmX6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below ground level earth plate connected with 4 mm dia GI wire as earthing lead by means of bolts, nuts, check nuts and wahers of galavanised iron all as shown in Electrical plate No.3 of MES Sch part I and testing on completion including neccessary excavation and earth work, adequate common slat, charcoal dust and funnel PCC (1:3:6) type C-1 pit with pre-cast RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 8 mm dia bars, MS bar 3 Nos both ways funnel with 20, mm dia GI grade watering pipe earthing lead with GI protection pipe medium grade 15mm dia up to 7.5m. from earth plate to equipment earth point complete all as specified including dismantling of existing earthing complete all as directed and specified..

Taking down carefully after disconnecting electrical/water supply connections and transporting to the work shop for carry out the servicing / over hauling of the storage type electric water heater (Geyser) of storage capacity 25 / 50 litres of any make / type by cleaing the inner surface of the tank / heating element with chemical to remove the scaling / rust & reassembling the same after replacing burnt out parts and refixing on its original position including testing complete all as specified and directed. (Spare parts required to be replaced shall be measured and paid for separately as supply only hereinafter in schedule A)

Supply only heating element of the following rating as required at site including rubber washer/packing complete all as directed and specified.. Make : "RECOLD /THEETA / SWARNA or equivalent ISI marked. (a) 1/1.5 KW.

Supply only base assembly complete i.e., "SIPHON SET" inlet, outlet, thermostat pockets with drain plugs & screws for fixing the element inclusive of clamps for holding the element with nuts & bolts complete all as specified and directed.

Supply only thermostat stem type suitable for geysers 25 / 50 litres complete all as specified and directed.

Supply only inner water tank of geyser 25 ltr capacity to suit the exising geyser complete with nut bolts complete all as specified and directed.

Supply only outer tank of geyser 25 ltr capacity to suit the exising geyser complete with all standerded accessories complete all as specified and directed.

Supply only indicator lamp rectangular / round type suitable for 25 / 50 litres geysers complete all as specified and directed.

Supply only pressure release valve 15mm dia complete all as specified and directed.

Repairs to siphon set by soldering/brazing including replacement of bolts/nuts/washers/rubber gaskets etc complete all as specified and directed.

Supply & fixing in repairs 15 mm dia steel pipe with adopters 18" long and fixing in position for hot water/outlet connections complete all as specified and directed.

Supply & fixing in repairs PVC connecting pieces with two brass adaptors 18" long & fixing in position for cold / Hot water / inlet connection complete all as specified and directed.

Supply & fix in replacement stop cock brass ISI marked 15mm dia & connecting up in position complete all as specified and directed.

Supply & fix in replacement Gun metal Non-Return valve 15mm dia complete all as specified and directed.

Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running complete all as specified and directed and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearings, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete. (b) Rewinding and spare parts to be replaced shal be measured and paid for separately as supply only.

Re-winding of ceiling fan any sweep with same guage supper enameled copper wire to maintain speed at load complete all as specified and directed.

Supply only ball bearing for exhaust/ceiling fan of any sweep complete all as specified and directed. Make : SKF/NBC/FAG

Supply only GUN METAL BUSH for exhaust / ceiling fan of any sweep complete all as specified and directed.

Supply only fan condenser of following sizes complete all as specified and directed Make : Asian / EPCOS :- (a) 2.5 mfd.

(b) 4 to 6 mfd.

Supply only rubber reel, nut bolts, washer, split pin complete all as specified and directed.

Supply only Fan connector suitable for wire connection complete all as specified and directed .

Taking down the repairable exhaust fan of 300 MM / 380 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running complete all as specified and directed and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the resistance value. (b) Rewinding and spare parts to be replaced shal be measured and paid for separately as supply only.

Material and labour for re-winding of exhaust fan 300 MM / 380 MM sweep, any make, with same guage supper enameled copper wire to maintain speed at load complete all as specified and directed .

Supply only ball bearing for exhaust of any sweep complete all as specified and directed . Make : SKF/NBC/FAG

Supply only gun metal bush for exhaust of any sweep complete all as specified and directed .

Taking down the repairable exhaust fan of 450 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running complete all as specified and directed and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the resistance value. (b) Rewinding and spare parts to be replaced shal be measured and paid for separately as supply only.

Material and labour for re-winding of exhaust fan 450 mm sweep, any make, with same guage supper enameled copper wire to maintain speed at load complete all as specified and directed .

Supply only Flexible twin core copper wire 23/0.0076 complete all as specified and directed.

Supply and fixing in repairs Pin type, porcelain, vitreous white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65mm dia suitable for 1100 volts grade including taking out existing unserviceable insulator all as complete all as specified and directed.

Supply and fixing in repairs insulator shackle type, porcelain, vitreous, white, brown or green insulator including galvanised and mild steel straps of size 31x5mm, washers, insulator bolts, washers and nuts, size of insulator 100 mm height, 115 mm dia with 14 mm dia bolts for 1100 Volts grade including taking out existing insulator complete all as specified and as directed.

Cutting the tree branches which touches the LT OH lines and 2.5 mtr away from centre line of LT OH line span not exceeding 60 mtrs between poles and deposting the tree branches/leaves at 30 m distance away from site. Note : Any number of tree branches cut in one span will be measured as one length for payment purpose.

Material and labour for dry crushed stone dust/ river sand filling in trenches to required width at bottom and top of cable cushioning including spreading leveling and consolidation completer all as directed. Note : Punned thickness shall only be measured and paid.

Material and labour GI tube, , light grade with all fittings, complete, fixed to walls, pole ceiling or laid in trenches for cable protection all as specified for the following size of pipe complete all as specified and directed. NOTE :- (Excavation and earth work where required shall be measured separately. MS Clamps for fixing on wall / pole , etc are included in the unit rate). (a) 80 mm dia bore

(b) 40 mm dia bore

Material and labour for preperation of old painted steel surface of LT pole 8.5/9 m long above GL/coping including cross arms,channels,Flat iron,Clamps in LT/HT OH line by scraping with wire brush/ sand paper and applying one coat of aluminium paint including pole numbering all as specified and directed by Engr-in-charge.

Supply and fixing in replacement, connect, test and commissioning of LT underground cable XLPE insulated, armoured heavy duty electric cable with aluminium multi stranded aluminium conductor heavy duty 1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following sizes including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings/walls without cable duct) complete all as specified and directed size cable :- Notes : (i) Excavation & earth work, sand cushioning, brick protection will be measured and paid for separately under relavant item here in before . (ii) Cost of jointing material e.g. lugs, thimbles, nut bolt and washers shall include in quoted rates. (a) 120 Sqmm 3.5 core.

(b) 35 Sqmm 3.5 core.

(c) 25 Sqmm 4 core .

(d) 16 Sq mm 4 core.

Supply and laying sub class B bricks, old size, laid flat adjacent to each other, perpendicular to cable with width equal to length in trenches for protection of cable complete all as specified and directed.

Material and labour for for PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundations of stays and poles, copping of poles etc complete including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Supply and fixing in replacement Automatic Street Light Switch using NATURE SWITCH for automatic switching of Street Lights based on LUX level of Natural Light. The Sensor (Nature Switch) along with suitable Power Contactor, MCB and Support Terminals should be enclosed in pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade special moulding compound (Sintex make SMC Junction box) conforming to IP54.The Contactor, MCB and Circuit Wiring should suitable enough to take load of 12 kW load equally distributed over 3-phase .Contactor Rating: 40.Amps (4-pole).MCB (single-pole) Rating: 40.Amps (3 nos.) Nature Switch: Kakatiya Energy Systems Pvt. Ltd. Hyderabad (EnC Approved) Contactor: BCH/L&T/Schneider or equivalent MCB: Hager/Schneider/Legrand/L&T complete all as specified and directed Make:SWADEEP – 02EC 12kW3P or equivalant as approved by GE.

Supply and fixing in replacement of LED street light /road way luminaries 45 watts , with pressure die cast housing heat sink with IP 66 protection, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including fitted on existing street light pole bracket complete all as specified and as directed. Make Havells Cat ENDURAPEARLNEOSL45WLED757PSYTOPC OR Equivalent in make as specifiedc in appendix 'B' as approved by GE.

Supply and fixing in replacement of LED street light /road way luminaries 60 watts pressure die cast housing heat sink with IP 66 protection, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including fitted on existing street light pole bracket complete all as specified and as directed. Make Havells Cat ENDURAPEARLNEOSL60WLED757PSYTOPC OR Equivalent in make as specifiedc in appendix 'B' as approved by GE.

Supply and fixing in repairs new generation energy saving environmental friendly, long life, exclusive innovative die-cast aluminium IP-65 flood light with high power LEDs of 120W as light source, suitable for highlighting architectural facade highmast and general purpose lighting, interchangeable electronic driver high efficiency longer life, protection against high surges , high /low voltage cutoff, open/short circuit protection and high power factor LEDs as light source including fitted on existing street light pole bracket complete all as specified and as directed. Make :- Havells Cat No. ENDURAPEARLMAGSL120WLED757PASYTOTGASTHO OR Equivalent in make as specifiedc in appendix 'B' as approved by GE.

Supply and fixing in repairs LED 25Watt post top lantern (gate light) energy saving, environment friendly designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed. Make:- Havell's cat part No RUBYPT25WLED757PSYMTOPC OR Equivalent in make as specifiedc in appendix 'B' as approved by GE.

Supply and fixing in repairs of street light bracket made out of 40mm dia light grade GI pipe of 1.5m long bend to shape including single coat of aluminium pait over a coat of red primer painting complete all as specified and as directed. NOTE:- MS clamp, nuts & bolts are measured and paid under item herein after.

Material and labour for Checking/megering of UG cable fault of any size/core and taking out the damaged portion of cable from trenches and removing the fault portion of cable and checking, jointing the same with proper cable end jointing kit and testing for smooth functioning of complete cable and re-laying the same after testing of following size complete all as specified and as directed . Notes : (i) Excavation & earth work, relaying of brick protection and relaying soft soil for cushioning deemed to including the job. (ii) Extra cable will be measured and paid under relevant item. iii) Joint kit required will be measured and paid separately under relevant item.

Material and labour for for straight through joint for UG cable including joint kit for making joint suitable complete all as specified and as directed for the following size :- (a) 10 sq mm to 16 Sq mm, 2 core.

(b) 16 sq mm to 25 Sq mm, 4 core.

(c) 35 to 95 Sq mm, 3.5 core.

Material and labour for disconnecting from existing main taking out from LT panal board for servicing & overhauling LT panel/ LT ACB panel of any make 400 to 1000 Amp, 50Hz 415V AC including taking out existing mechanism complete with servicing of operating machnism, testing of triping mechanism complete to make it funtioning smoothly and including replacement of unserviceable spares and fixing in its original postion with all connections and testing complete all as specified and as directed. Note : Spare parts required to be replaced shall be measured and paid for separetely as supply only under respective items here in after.

Supply only Following spare parts suitable LT ACB suitable 400A-1000 A Capacity complete all as specified and as directed. (a) Main isolating contact (Male and Female) jaw type complete inclubing fixing accessories

(b) Shunt Trip coil/ Closing coil 415 VAC suitable for 800 amps ACB

(c) Under voltage tripping divice (UVT) 415 volts

(d) Single phae CTS at rating 800/5A

Supply and fix in repairs GI union to be connected to Old GI Pipe where required of the following size complete all as specified and directed :- Note :- Excavation & earthwork shall be measured and paid for seperately. (a) 15 mm dia bore

(b) 20 mm dia bore

(c) 25 mm dia bore

(d) 40 mm dia bore

(e) 50 mm dia bore

(f) 80 mm dia bore

Supply and fix in repairs GI Elbow to be connected to Old GI pipe of the following size complete all as specified and directed :- Note :- Excavation & earthwork shall be measured and paid for seperately. (a) 15 mm dia bore

(b) 20 mm dia bore

(c) 25 mm dia bore

(d) 40 mm dia bore

(e) 50 mm dia bore

(f) 80 mm dia bore

Supply and fix in repairs GI Tee to be connected to Old GI pipe of the following size complete all as specified and directed :- Note :- Excavation & earthwork shall be measured and paid for seperately (a) 15 mm dia bore

(b) 20 mm dia bore

(c) 25 mm dia bore

(d) 40 mm dia bore

(e) 50 mm dia bore

(f) 80 mm dia bore

Supply and fix in repairs GI Socket to be connected to Old GI pipe of the following size complete all as specified and directed :- Note :- Excavation & earthwork shall be measured and paid for seperately. (a) 15 mm dia bore

(b) 20 mm dia bore

(c) 20 mm dia bore

(d) 20 mm dia bore

(e) 20 mm dia bore

(f) 20 mm dia bore

M/S - KRUPA ELECTRICALS

shakti engineering and electrical works

SKS Electricals

PAMS ENTERPRISES

Sunil Constructions