PROVN OF TOILET BLOCK FOR LADIES AND GENTS OF COMMUNITY HALL AND SOME MINOR AND REVENUE WORKS AT MILIT GIRINAGAR PUNE 25

B/R PORTION Surface excavation n.exc 30cm deep and average 15cm and getting out in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation, laying pipes/cables/poles etc and getting out in hard/dense soil complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as specified and directed.

Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed.

M&L for Rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10mm thick on cement concrete block masonry/concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only WPC complete all as specified and directed.

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over new plaster surfaces internally complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/New surfaces of wall including necessary scaffolding required for painting work, safety measures etc complete all as specified and directed.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) as in Roof beams, lintels, cantilevers, etc complete all as specified and as directed.

M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) as in slabs supported on walls, chajja, Roof beam, roofs, canopies, shelves & the like complete all as specified and directed.

M&L formwork to soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, overhangs etc also splays between floors and beams etc. complete all as specified and directed.

M&L formwork to soffits of suspended slab such as roof slabs, chajja, floor slabs, shelve, landings and similar works n.exc 200 mm thick (horizontal or sloping) complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incfluding cranking, bendidng etc and binding with and includidng mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for TMT bars 5 to 10mm dia as in sturrips scut to length bebt to shap required including cranking, bending etc and bindidng and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified.

Spreading, levelling, watering and well ramming the earth filling under floor not exc. 25cm thick in layers complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L for non skid, ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but Not Exceeding 0.11 Sqm coloured tiles, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified & directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/ regtangular) polished, stain proof and durable and abrasion resistant with high flexural strength area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for full body colour Marble tiles glossy finish 9-10 mm thick (square/ regtangular) polished, stain proof and durable and abrasion resistant with high flexural strength area of each tiles (600 mm X 1200 mm) or not exc 1.28 sqm in skirting/vertical surfaces etc. as per manufactureres specification confirm to IS 13630 and ISO 10545 and joineted neat in cement slurry and pointed in white or colour cement to match with over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 12mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600mm x 600mm with using 32.5mm x 23.5mm x 1.5mm thick main tee, 25mm x 23.5mm x 1.28mm cross tee and 25mm x 23.5mm 1.2mm angle fixed to wall for false ceiling including necessary supporting hangar with 4.00mm dia GI wire and 'J' hook bolts washer nuts for securing frame work to ceiling, suspended @ 120cm C/C both ways, size of grid shall be 605mm x 605mm complete all as specified and directed.

S&F for solid PVC coloured door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing complete all as specified and directed.

S&F for factory made coloured solid PVC moulded door shutter 28 to 30mm thick (styles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on front face and 2mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S&F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolts complete all as specified and directed.

S&F 150 mm size aluminium anodised door handles complete all as specified and directed.

S&F anodised aluminum frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and directed.

S&F anodised aluminum door shutters, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

M&L for 12mm thick frosted toughened glass fixed to door and window and partition as directed by Engr-in-Charge including necessary wooden beadings, steel clamps, hinges nails, screw, complete all as specified and directed.

S & F for door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S& F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, 10 litres capacity low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed.

S&F Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.

S&F Counter top Wash hand basin, vitrous china, coloured flat back of size 540 X 360 X 150 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy swan neck pillar tap chromium plated with 150mm extention body fixed spout without popup water system with 600mm long braided hoses complete all as specified and directed.

S&F Chromium Plated Push type, auto closing concealed Urinal Flush valve with wall flange complete all as specified and as directed.

Supply and Fix high quality cabinet and storage complete as approved colour and pattern with basin size 810 X 475 mm, LED light mirror cabinet, suffucient storage space with glass shelves & durable, scratch and water resistant, soft closing door hingescomplete all as specified and directed.

S&F Bib taps fancy type chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule complete all as specified and as directed.

S&F fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F stainless steel grating doom 125mm dia complete all as specified and directed.

S&F Chromium Plated Toilet Paper Holder complete all as specified and directed.

S&F CP soap dish any type fixed type fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for uPVC/iron Pipe complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size incl screws complete all as specified and directed.

S&F in repairs 60 cm long brass CP tubular towel rail 20-mm dia D type complete all as specified and directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed.

S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

All as per item herein above but 15mm bore complete all as specified and directed.

M&L for cutting chases, pinning in brick, stone, concrete block walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good complete all as specified and directed.

M&L for PVC (SWR) waste and vent pipe 100mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and directed.

M&L for PVC (SWR) waste and vent pipe 75mm bore in any length with rubber ring joint laid in floor or wall complete all as specified and directed.

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F 75 mm dia PVC (SWR) vent cowl complete complete all as specified and directed.

S&F PVC (SWR) junction double (single T) of size 110mm bore jointing with solvent cement complete all as specified and directed.

S&F 500 ltrs capacilty, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 20 mm high pressure with polythene float and fly nut complete all as specified and directed.

Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

M & L for granite 18mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F structural rolled steel work in roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy duty brackets framing (beam, tee, angle, channel or flat sections) inlcuding distance peices, cleats etc complete all as specified and directed confirming to Gde Fe-410-W (Gde E250) quality-A

S&F nonstructural steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxied primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and directed.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection complete all as specified and directed.

Demolition of brick work or stone masonry / PCC block walling built in cement mortar or cement lime mortar incl arches, pillers etc.complete all as specified and as directed.

M&L for Fly ash bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Rendering 15mm thick on concrete block/ brick or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls over 10 cm width or girth over a coat of approved primer and applying two coat of oil emulsion distemper (tint as approved by GE) over a coat of primer complete all as specified and directed.

M&L for two coats of external waterproof emulsion paint Apex Ultima or equivalent complete all as specified and directed over a coat of alkali resistant primer on new/old plastered surfaces of wall including necessary scaffolding required for painting work & safety measures complete all as specified and as directed.

M&L for complete removal of existing paint and applying two coats of oil bound distpemper over a coat of primer on old surfaces complete all as specified and directed.

M & L for machine cut cudappah stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair 18mm thick prelaminated VIR MAXPRO HDFWR (High density fibre water resistant) or HDHMR (high density miosture & impact resistant) board interior grade, conforming to IS-12406, Gde-BWR prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets, toilet selves etc complete including all factory made moulding shutterwork and soft closing auto hinges as reqd complete all as specified and directed.

M&L for 50mm cupboard magnet including high quality magnet and steel plate complete all as specified and directed.

S&F 40mm width of flaps (when open) in mm continous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F 150mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed.

Taking down chowkats or frame of wooden or steel Not exc 1.5 Sqm with shutters (without taking of shutter from the frame) complete all as specified and directed.

Taking down shutters of any description but exc. 1 Sqm and n exc. 2 Sqm each complete all as specified and as directed.

M&L for 35mm thick Flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and directed.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F Brass handles, cast type polished bright, of size 200mm complete all as specified and directed.

S&F Brass sliding door bolt with sand of die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of size 300mm complete all as specified and directed.

S&F Brass barrel tower bolt with cast of sheet barrel and rolled or cast bolt and fixed fo size 200mm long complete all as specified and directed.

S&F for 140 mm long brass body and tongue with hard drawn steel spring door stopper fixed to door bottom rail complete all as specified and directed.

Dismantling floor or wall tiling incl cement mortar bedding (but not backing) removing serveaceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Counter top Wash hand basin, vitrous china, coloured flat back of size 565 X 425 X 140 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed.

S & F full length continental Swivel glass mirror with chrome finish and luxury look superior built quality product including light strip in border complete all as specified and as directed .

S&F Chromium Plated Towel bar 600mm long complete all as specified and directed.

S&F Chromium Plated soap dish holder complete all as specified and directed.

S&F Chromium Plated soap dispenser with glass bottle complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed.

S&F for 15/16mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 16mm bore pipe on walls/ceiling or laying in floors complete all as specified & directed.

Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed.

S&F in PVC (SWR) floor trap, dia of outlet 100 mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore complete all as specified and directed.

(b) One 5 amps 5 Pin socket outlet on same board .

(c) One 5 amps 5 Pin socket outlet on independent board .

All as per Item herein above but with PVC insulated copper conductor cable of size 4.0 Sqmm and 4.0 Sqmm for earth continuity conductor for 16A switch socket complete all as specified and directed.

S&F Modular type switch single pole ,6 Amps one way, 1 module, ISI marked complete all as specified and directed.

S&F Modular type switch single pole ,16 Amps one way, 1 module, ISI marked complete all as specified and directed.

S&F Modular type socket out let 6 Amps 2/3 pin combined, 2 module, ISI marked complete all as specified and directed.

S&F Modular type socket out let 2 in 1, 6/16 Amps, 2 module, with ISI marking complete all as specified and directed.

S & F ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts, ISI marked complete all as specified and directed.

S & F LED Tube Light luminaire Fitting 1 X 20W, (4 Feet) made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrted electronic driver, and operated in single phase 230 volts , 50 Hz all accessories internally pre-wired and including connecting upto three core twisted flexible copper conductor cable of from connector andcomplete all as specified and directed.

S & F LED Tube Light luminaire Fitting 1 X 10W, (2 Feet) made of anodised extruded aluminium housing, with high transmissivity diffuser, high lumen output, with suitable integrted electronic driver, and operated in single phase 230 volts, 50 Hz all accessories internally pre-wired and including connecting upto three core twisted flexible copper conductor cable of from connector complete all as specified and directed.

S & F LED 30 W building security light pressure die cast aluminium housing LED street light lumaniries with IP 66 and complete accessories complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete with complete all as specified and directed.

All as per above item herein above but for 250mm sweep complete all as specified and directed.

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed.

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and directed.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and directed.

M & L for earthing complete with deep galvanised earth plate 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep bellow ground level with top edge of plate) not less than 1.5 m bellow normal ground level connected to galvanised earth led strip 25x 4 mm by means of galvanised iron or steel all as shown in electrical plate No 3 connected to earth test point all as specified or indicated including testing complete all as specified and directed. Note :- (i) Rate are including of excavation,PCC Pit, PCC/CI cover, fune, watering pipe, test point complete) (ii) On completion of the complete work/job the Contr is to perform earth resistance tests for each earthing job in the presence of the Engr-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits of relevant Standards/IS then the job is to be redone without any extra cost to the Dept till the results are satisfactory.

M & L DWC pipe heavy duty minimum 32/40 mm dia of required length for protection of cable complete including necessary clamps, nuts, bolts fixed complete to the wall and ceilling or laid in floors complete all as specified and directed.

M&L for cutting the existing hardstanding/PCC/WBM road at a depth of not less than 60 cm & 45 cm in width for passing of HT cables through GI pipes, hume pipe returning filling in, complete incl finishing the surfaces by providing cement concrete type B1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and as directed.

Supply and laying tubes, Galvanised,"medium " grade, with all fittings and fixed to walls, ceiling or laying in floors, complete all as specified and directed. for following size:- (a) 25 mm bore pipe

Supply and fixing of Gun metal gate valves with iron wheel head, screwed both ends for iron pipes complete, size of GM gate valve 25mm complete all as specified and directed.

Supply, laying and testing cable LT XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size complete all as specified and directed for following :- (a) 16 sqmm 4 core

(b) 10 sqmm 4 core .

Supply and fixing GI tubing (ISI Marked), light grade of size 25 mm bore for cable protection with all necessary fittings as required, laid in trenches, under road/floors or on electric poles complete all as specified and directed.

Supply and Fix 12 W Bollard LED light/Garden Light fitting New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source including excavation, PCC foundation and suitable water proof junction box for connecting the lights complete all as specified and directed.

Supply and Fix Weather proof Street light SMC/FRP Junction Box of suitable size including MCB SPN 6 Amp `C' Curve and connecting terminals 4-way and fixing with street light steel tubular pole using necessary MS Clamps, nuts, bolts washers of suitable size etc. complete all as specified and directed.

S&F Distribution board sheet metal enclosure double door, factory made fixed flush with wall inside niches for mounting MCBs 230Volts with front openable cover single pole and neutral 4 way with suitable size bus bar consumer unit including connection to existing earthing complete all as specified and as directed.

S & Fix of MCB TPN, 450 volts, 25 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.

S & Fix 2 x 2 Ultra modern recess mounting 36 watts luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling complete all as specified and directed.

Supply nd fix exhaust fan made of Sturdy Engineering Plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, Copper winding of sweep 200mm complete with complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with, blades, and frame and louvers shutter, 50 Hz, RPM 1200, Copper winding complete all as specified and directed.

S & Fixing of LED Strip 6 W per RM, environmental friendly, new generation, energy saving, decorative IP43 complete fitting with all fixing arrangement complete with complete all as specified and directed.

M & L for submain wiring alongwith earth wire of size 2x4.0 sq mm and 1x4.0 sq mm as earth wire FRLSH PVC insulated copper conductor single core cable, multistranded Concealed and including suitable size of Concealed conduit with its all accessories complete all as specified and directed.

Supply & fix wall mounted fan 450 mm sweep, Air delivery 5220 CMH (cubic meters per hour), speed 1300 rpm, single phase 240 volt, 50 Hz including mounting arrangement complete all as specified and directed.

Supply and draw submain wiring with two single core 1.5 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on surface PVC casing caping medium grade of 20/25 mm wide, with double locking type, including all accessories including 1.5 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and directed. Note:- Cost of PVC casing caping, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

Supply & Fix of metal flush box 3 module complete all as specified and directed.

Supply & Fix of white cover plate with frame 3 module complete all as specified and directed.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 5600 CUM per hour/90 Litre (or nearest size) body material ABS, Cooling Media HONEYCOMB complete all as specified and directed.

M&L for stand of desert cooler with min size of angle iron 35mmX35mmX5mm with wheel of suitable height for all four legs complete all as specified and directed. Note : Drawing will be approved by Engr-in-charge.

M& L Sub Main Wiring two run of size 2.5 Sqmm PVC insulated electric power cable (heavy duty) 1100 Volt Grade FRLSH with stranded copper conductor with 2.5 Sqmm PVC insulated copper conductor earth wire in casing caping of suitable size (two run of 2.5 Sqmm cable and one of 2.5 Sqmm wire and one run of Casing Caping will be measured as one unit) including dismantling of existing unserviceable submain wiring complete all as specified and as directed.

all as per herein above but size of wire 2x6 sqmm and 1x6sqmm complete all as specified and directed.

Supply, installation, commissioning of Glass Top Deep Freezer of capacity 320 litre, single phase 240 volt, 50 Hz complete all as specified and directed.

Supply & install Refrigerators, electric driven single phase, 230 volt AC supply of Capacity 400 litre, BEE 3 star rated complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage tabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed.

Supply and draw submain wiring with two single core 4.0 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor on surface PVC casing caping medium grade of 20/25 mm wide, with double locking type, including all accessories including 4.0 sq mm multi-strand FRLSH PVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete all as specified and directed. Note:- Cost of PVC casing caping, cutting chases on walls and making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with the existing shade / tint are deemed to be included in the rates quoted.

Please Enable Macros to View BoQ information