REPAIR/MAINT TO TILING AND CUP BOARD SHUTTERS IN VARIOUS ZONES IN MIL STN TALBEHAT

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc. complete all as specified and directed.

M & L for Non-skid colored Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.

All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.

M/L for Non - skid colored Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M/L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.

M/L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match and in vertical surfaces such as skirting, dados and risers to steps etc. including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for colored Glazed ceramic tiles 450 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or colored cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.

Demolition of stone slab and tiles of any description or thickness in floor aprons etc. laid / bedded and pointed in any mortar.

M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Moulding as In edge of granite platform complete all as specified & directed.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item above but 20 mm bore

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item above but 20 mm bore

M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets with pedestal, CP waste coupling 32mm ,waste pipe complete all as specified and directed.

S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc. complete all as specified and directed

S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by drilling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.

Ditto Item No 21but length 60 cm long.

S&F in repairs PVC waste pipe 32mm bore 600mm long with one end socketed complete all as spd & directed.

S&F in repair CP grating round 110 mm with hole/with out hole as required complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L PCC (1:3:6) type C-2 (using 20mm graded stone aggregate) 100mm thick as in sub bases/ floors all as specified and directed.

Machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade of approved quality, laid over and include 50mm thick sand cushion vibrated with mechanical vibrator complete all as specified and as directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in band, coping, slightly rounded or chamfered angles and throating, and similar work including necessary form work all as specified and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Rendering 15mm in CM 1:4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S & F in repair 15mm bore pillar tap, foam flow with flange, Half Turn/ Quarter turn, fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed.

S&F Half Turn / Quarter turn, 15mm dia CP central hole basin mixer without pop up waste system with 450 mm flexible hose for mixing of hot and cold water screwed for iron pipe and fixed complete all as specified and directed.

S&F Half/quarter turn chromium plated 15 mm bore wall mixture 2 in 1 with provision for over head shower with 115 mm LB pipe & wall flange complete with bend pipe and wall flange, complete all as spfd & directed ,

S&F in repair brass chromium plated towel rail 20mm dia D type 60cm long between flange all as specified and directed by Engr-in-Charge

S&F Sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X330mm x160mm complete al as specified and as directed

S&F in repair beveled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as spfd and directed by Engr-in-charge.

Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltrs but n.exc 500trs capacity each complete all as specified and directed

Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltrs but n.exc 1000trs capacity each complete all as specified and directed

S& F rotational molded synthetic (HDPE) water storage tank 500litre capacity (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spd & directed.

S&F rotational molded polyethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I complete all as spd & directed.

S&F in repair ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as spd & directed.

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed

S&F in repair tubular stainless steel curtain rod 20mm dia with including fixing brackets complete all as specified and directed.

S&F decorative type knobs with bracket of Stainless steel fixing at end of curtain rod complete al as spd & directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completed all as spd & directed.

S&F in repair Stainless steel Magnetic door catcher size 5.08x2.54x2.54 cm with plate completed all as spd & directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.

S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden window fixed with wooden bead and pin tacked complete all as specified and directed.

S & F figured glass pin headed type, 4mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden bead and pin tacked complete all as specified and directed.

S&F 0.9 to 1.5m bottom door seal brown Aluminium frame 38 to 45mm width all as specified and directed

S&F in repairs 18mm thick (one side colour decorative lamination & other side balancing lamination sheet) solid PVC board with cement solvent adhesive for shutter /kitchen cabinet/cup board shutter/ partition wall / wall cabinet and similar works complete all as specified & directed.(Note : Colour approved by Engr-in-charge)

S&F continuous (Piano) hinges, brass finish of whem open 30mm width of flaps complete all as specified and as directed.

M&L for IInd class H/W Plain , Solid , Straight chowkats and frames sec area n exe 40 sqcm complete and all as specified..

S&F 100 mm size hasp and staple, aluminium anodized safety type, fixed with screws complete all as specified and directed

S&F 75mm size hasp and staple, aluminium anodized safety type, fixed with screws complete all as specified and directed

Demolition of Reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete.

S&F steel reinforcement of TMT Bars of size 8mm dia and over cut to length bent to shape as required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.

M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc. complete all as specified and directed.

M&L for form work fair finished to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide complete all as specified and directed.

M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. .complete all as specified and directed.

S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets and similar work complete as per specifications and as directed by the engineer - in -charge.

S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of one side prelaminated and other side plain white or colour to make kitchen cabinet/ drawer shutters and similar work complete as per specifications and as directed by the engineer - in - charge.

S & F in repairs 12 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in -charge.

S & F in repairs 6 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the engineer - in -charge.

S & F auto closing hinges 35 mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed Make:- KAFF or equivalent

S & F Ball bearing runners 45 mm (length 20" to 25") Telescopic , full extension load capacity 50 kgs complete all as specified and as directed Make:- KAFF or equivalent

S & F stainless steel handles 100 mm size for kitchen cabinet/ any shutters complete all as specified and as directed.

S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etc.complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etc. complete all as specified and directed by Engineer-in-charge.

S&F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.

M&L for preparing old plastered surfaces on Wall/ceiling applying one coat of white wash complete all as specified and directed.

M&L for preparing old plastered surfaces on Wall/ceiling applying one coat of oil bound distemper in any colour complete all as specified and directed.

M&L for preparation of old painted surfaces of wood & wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F 12 mm thick toughened glass fixed with steel connectors, top and bottom pivots including as partition wall, including all necessary fitting all as directed by Engr-in charge as specified. (i) The measurements shall be taken actual at site, any wastage should be included in the rate quoted. (ii) the above section shall be from Jindal/Indal/Hindal (iii) toughened glass make : Atul/ Modi Guard.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S A.R BUILDERS

M/s Indu Enterprises

M/S M S Constructions