Tenkasi District Implementation of Jal Jeevan Mission to provide Functional Household Tap connection to Rural Households in Odaimarichan Panchayat in Alangulam Panchayat Union package no15

Amount

1.Construction of 30000 litres OHT, Providing New borewell, Pumpingmain, Delivery Line and FHTC at Indranagar village in Odaimarichan Panchayat in Alangulam Panchayat Union.

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

Second depth of 1m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Supplying and filling with excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

a.Below GL

b.Above GL (0.000 - +3.300m)

c.Above GL (+4.300 - +5.300m)

d.Above GL (+5.300 - +6.300m)

CURVED SURFACE:-(0.000 - +3.300m)

SQUARE COLUMN:-

a.Below GL

b.Above GL (0.000 - +3.300m)

c.Above GL (+3.300 - +4.300m)

d.Above GL (+4.300 - +5.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for provid

Supplying and fixing of CI manhole frame and cover of size 0.60mx0.60mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Supply and fixing of Pipe connection arrangements for inlet, outlet, scour and Overflow for 30000 litres capacity OHT(65mm GI Pipe)

65mm GI Tee

65mm GI Elbow

65mm GI Flangeset

65mm GM Gatevalve

Reinwater Harvesting

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

Second depth of 1m

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Collection and supply of 40mm HBG metal and filling in to the recharge pits including cost and conveyance to the site and all labour charges for filling as per standard specifications.

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

DISTRIBUTION SYSTEM

Supply and Delivery of 63mm PVC Pipe 4Ksc

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B

Refilling of excavated portions for using excavated earth and levelling the top of the surface properly with adjecent ground levels

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Power Pump

Drilling of vertical bore well in hard rock area including transportation charges etc., complete.

a. 180mm dia Depth upto end of casing pipe

b. 150mm dia Depth below end of casing pipe

Supply and Delivery of 180mmф PVC Casing pipe (6KSC)

Supply and Deliveryof three phase submersible motor pump set with duty condition of 100LPM against 200m head

Supply and Delivery of three phase 7.5 H.P Panel Board for Submersible motor pump set

Supply and Delivery of 3core 4.00mm2 flat submersible cable

Supply and Delivery of 50mm UPVC Pipe

Supply and Delivery of MS Kiosk of size 0.75x0.45x0.75m

Charges for erecting submersible motor pump set with proper cable, EB Service, Trial run & clamping etc., complete.

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B for pipe laying work.

Supply and Delivery of 75mm PVC Pipe 6KSC

Laying and jointing of PVC Pipe

Refilling of excavated portions for using excavated earth and levelling the top of the surface properly with adjecent ground levels

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-144

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

Provision for FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and delivery flow control valve for 20LPCD - 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

2.Construction of 60000 litres OHT, Providing New borewell, Pumpingmain, Delivery Line and FHTC at Narayanapuram village in Odaimarichan Panchayat in Alangulam Panchayat Union.

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

Second depth of 1m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

a.Below GL

b.Above GL (0.000 - +3.300m)

c.Above GL (+3.300 - +4.300m)

d.Above GL (+6.300 - +7.300m)

CURVED SURFACE:-

b.Above GL (0.000 - +3.300m)

c.Above GL (+3.300 - +4.300m)

SQUARE COLUMN:-

a.Below GL

b.Above GL (0.000 - +3.300m)

c.Above GL (+3.300 - +4.300m)

d.Above GL (+4.300 - +5.300m)

d.Above GL (+5.300 - +6.300m)

d.Above GL (+6.300 - +7.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supply and fixing of Pipe connection arrangements for inlet, outlet, scour and Overflow for 60000 litres capacity OHT(65mm GI Pipe)

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for provid

Supplying and fixing of CI manhole frame and cover of size 0.60mx0.60mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Supplying and filling with excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Rain Water Harvesting Structure

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B.

For first depth of 2m

Second depth of 1m

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Collection and supply of 40mm HBG metal and filling in to the recharge pits including cost and conveyance to the site and all labour charges for filling as per standard specifications.

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

DISTRIBUTION SYSTEM

Supply and Delivery of 63mm PVC Pipe 4Ksc

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B

Refilling of excavated portions for using excavated earth and levelling the top of the surface properly with adjecent ground levels

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Power Pump

Drilling of vertical bore well in hard rock area including transportation charges etc., complete.

a. 180mm dia Depth upto end of casing pipe

b. 150mm dia Depth below end of casing pipe

Supply and Delivery of 180mmф PVC Casing pipe (6KSC)

Supply and Deliveryof three phase submersible motor pump set with duty condition of 100LPM against 200m head

Supply and Delivery of three phase 7.5 H.P Panel Board for Submersible motor pump set

Supply and Delivery of 3core 4.00mm2 flat submersible cable

Supply and Delivery of 50mm UPVC Pipe

Supply and Delivery of MS Kiosk of size 0.75x0.45x0.75m

Charges for erecting submersible motor pump set with proper cable, EB Service, Trial run & clamping etc., complete.

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B for pipe laying work.

Supply and Delivery of 75mm PVC Pipe 6KSC

Laying and jointing of PVC Pipe

Refilling of excavated portions for using excavated earth and levelling the top of the surface properly with adjecent ground levels

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-144

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

Provision for FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and delivery flow control valve for 20LPCD - 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

3.Construction of 60000 litres OHT, Providing New borewell, Pumpingmain, Delivery Line and FHTC at Udayampuli Village in Odaimarichan Panchayat in Alangulam Panchayat Union.

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

For first depth of 2m

Second depth of 1m

Supplying and filling with sand including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

PLANE SURFACE:-

a.Below GL

b.Above GL (0.000 - +3.300m)

c.Above GL (+3.300 - +4.300m)

d.Above GL (+6.300 - +7.300m)

CURVED SURFACE:-

b.Above GL (0.000 - +3.300m)

c.Above GL (+3.300 - +4.300m)

SQUARE COLUMN:-

a.Below GL

b.Above GL (0.000 - +3.300m)

c.Above GL (+3.300 - +4.300m)

d.Above GL (+4.300 - +5.300m)

d.Above GL (+5.300 - +6.300m)

d.Above GL (+6.300 - +7.300m)

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

1.50m to 4.50m Below GL

0m to 1.50m Below GL

Above GL (0.000 - +4.500m)

Above GL (+4.500 - +7.320m)

Above GL (+7.320 - +10.980m)

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supply and fixing of Pipe connection arrangements for inlet, outlet, scour and Overflow for 60000 litres capacity OHT(65mm GI Pipe)

Fabrication, Supply, delivery and fixing in position of outside M.S.ladder of 0.45m wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm c/c welded, jointed etc., providing with one coat of Red Oxide paint for provid

Supplying and fixing of CI manhole frame and cover of size 0.60mx0.60mwith suitable 50x50x6mm MS angle fixed along edges etc., complete.

Supplying and filling with excavated earth including cost and conveyance and all labour charges such as watering and ramming etc., complete as per standard specification.

Rain Water Harvesting Structure

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B.

For first depth of 2m

Second depth of 1m

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Collection and supply of 40mm HBG metal and filling in to the recharge pits including cost and conveyance to the site and all labour charges for filling as per standard specifications.

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

DISTRIBUTION SYSTEM

Supply and Delivery of 63mm PVC Pipe 4Ksc

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B

Refilling of excavated portions for using excavated earth and levelling the top of the surface properly with adjecent ground levels

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.

Power Pump

Drilling of vertical bore well in hard rock area including transportation charges etc., complete.

a. 180mm dia Depth upto end of casing pipe

b. 150mm dia Depth below end of casing pipe

Supply and Delivery of 180mmф PVC Casing pipe (6KSC)

Supply and Deliveryof three phase submersible motor pump set with duty condition of 100LPM against 200m head

Supply and Delivery of three phase 7.5H.P Panel Board for Submersible motor pump set

Supply and Delivery of 3core 4.00mm2 flat submersible cable

Supply and Delivery of 50mm UPVC Pipe

Supply and Delivery of MS Kiosk of size 0.75x0.45x0.75m

Charges for erecting submersible motor pump set with proper cable, EB Service, Trial run & clamping etc., complete.

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete.

Cement painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Supplying & fixing with cuddapah slabs 20-30mm thick for cup board thick and pointed with cement mortar 1:3 -10 Sqm

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B for pipe laying work.

Supply and Delivery of 75mm PVC Pipe

Laying and jointing of PVC Pipe

Refilling of excavated portions for using excavated earth and levelling the top of the surface properly with adjecent ground levels

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil)-SD-18

Supply and fixing of TNEB Meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-127

Supply and fixing of 32Amps DP Switch of 500 V With matel clad with fuse and neutral (sideHandle) on sutiable TW Board with earth connection only.SD-144

Supply and fixing of 2 0f 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD-67

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL SD-83

Supply and fixing of 20mm dia GI Pipe including cost and conveyance all labour charges etc complete.

Provision for FHTCs

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around - 20mm

Common Items for HSC Connection - PBrass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (20mm) 15 mm

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes - 20mm

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK - 20mm

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Supply and delivery flow control valve for 20LPCD - 20mm dia

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

Cutting of old Cement Concrete road for laying the 20mm pvc pipe

Cement concrete 1:4:8 mix using 20mm ISS metal including cost and all cost and conveyance of materials and all labour charges etc complete

Cement concrete 1:2:4 mix using 20mm ISS HBG metal including cost and conveyance and all other labour charges etc complete.

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)