Repair and Maintanance work for Head works Motors With Panel Board Electrical Arrangement in Madhuranthagam Municipality

Amount

Rewinding of following burnt motor the work including the cost of winding wires sleeves connection wires and other requiring winding materials dismantling assembling testing etc. Complete ( the cost towards the old materials should be deducted while quoting the retes for this item)

30 HP Motor

10 HP Motor

7.5 HP Motor

5 HP Motor

Removal of Submersible pumpsets and its accessories from borewell/ open well for attending repairs etc,. Completed.

Up to 5 HP

Above 5 H.P to 10 HP

Refixing of Submersible pumpsets and its accessories from borewell/ open well for attending repairs etc,. Completed.

Up to 5 HP

Above 5 H.P to 10 HP

supply and fixing for 30 HP motor & panal Board following metrials for ISI MAKE including cost and conveyance of all metrials and all other with transporting charge etc. Completed as per standard specification TWAD rate

30HP Motor Pump Ball Bearing Change

30HP Terminal plate, Socket triming etc.,

30HP Panal Board Starter Timer

30HP Panal Board C.T. Coile Starter set Kit

30HP Panal Board Starter Relay Kit set

30HP Panal Board Volt Meter, Amps Meter

30HP Pump Gun metal Bush 110x50mm inner

Pump Ball Bearing

30HP Pump Packing Kark sheet

30HP Pump stud Bold net

30HP Pump Packing gland

30HP Pump Packing rope seal

30HP Pulley

30HP Pump Motor tyre coupler with bold net

30HP starter Transformar oil

Repair and maintenance for 30 HP motor following items and all other Labour charge with transporting charge etc. Completed as per standard specification TWAD rate

30HP shaft recondition charges welding facing

30HP Motor rotor Recontioning Welding turning

30HP Panal Board A.T.S. Rewinding

30HP Pump Repair shaft Recontion welding turning

30HP Pump Impellar Recondition Gun metal Welding turnign

30HP Pump Bearing block Recondition

30HP Pump removing and fixing and labour charges

supply and fixing for 10 HP & 15 HP motor following metrials for ISI MAKE including cost and conveyance of all metrials and all other with transporting charge etc. Completed as per standard specification TWAD rate

10 HP & 15 HP motor Turst bearing

10 HP motor Gunmetal Bush

10 HP motor Pump Implar

10 HP motor Pump Neck ring

10 HP motor Pump sluive

10 HP motor Pump Bowl

10 HP motor Bowl Bush

10 HP motor Bowl sluive

10 HP Panal Borad 45 Amps Conductor set

10 HP Panal Borad Timer

10 HP Panal Borad ON delay Timer

10 HP Panal Borad CT Coil set

supply and fixing for 7.5/5 HP motor following metrials for ISI MAKE including cost and conveyance of all metrials and all other with transporting charge etc. Completed as per standard specification TWAD rate

7.5/5 HP motor Turst bearing

7.5/5 HP motor Gunmetal Bush

7.5/5 HP motor Pump Implar

7.5/5 HP motor Pump Neck ring

7.5/5 HP motor Pump sluive

7.5/5 HP motor Pump Bowl

7.5/5 HP motor Bowl Bush

7.5/5 HP motor Bowl sluive

7.5/5 HP Panal Borad 45 Amps Conductor set

7.5/5 HP Panal Borad Timer

7.5/5 HP Panal Borad ON delay Timer

7.5/5 HP Panal Borad CT Coil set

supply and fixing for 6 sqmm 3 Core Capper cable for ISI MAKE including cost and conveyance of all metrials and all other with transporting charge etc. Completed as per standard specification TWAD rate

supply and fixing for 4 sqmm 3 Core Capper cable for ISI MAKE including cost and conveyance of all metrials and all other with transporting charge etc. Completed as per standard specification TWAD rate

Attanding UG cable fault and all other Labour charge with transporting charge etc. Completed as per standard specification TWAD rate

supply and fixing for UG cable fault Kit ISI MAKE including cost and conveyance of all metrials and all other with transporting charge etc. Completed as per standard specification TWAD rate

Supply and delivery of GI pipes and specials as per relevant IS specification for Broewell listed below inserting GI pipe in wall, cement patch up etc., and as per drawing enclosed including cutting and threading pipes.

80 mm GI Pipe ( 3 m length ) (As per IS 1239/Part I/90)

80 mm GI coupling (Heavy)

80 mm GI bend (Heavy)

80 mm GI Flange Set (Heavy)

80 mm MS clamp set

80 mm GM non return valve

80 mm GM gate valve

Removing the Existing Sluice Valve, Air valve for rope fixing wotk and removal of slushy soil and baling out water and replacing the Gate valve with sound pipe including jointing and cost of refilling the pipe line with water for retesting the pipe line etc., complete (excluding cost of sound pipe and jointing materials and warth work) and as directed by the engineers.

80mm to 200mm

250mm to 400mm

SG Ravi (BID ID -1170316)