Providing and fixing chain link fencing of Nangal Hydel Channel from RD-102200 to RD-104450 both side of NHC.

Amount

Cvil work

Dismantling stone masonry/Rubble masonry including stacking of serviceable materials and disposal of unserviceable materials. In cement. [As per CSR-2020 item No. 8.1-b]

Earth work in excavation in foundations, trenches etc.in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation, and subsequent filling around masonry in 15 cm layer with compaction including disposal of all surplus soil as directed with in a lead of 30 meter. [ As per CSR-2020 item No. 6.6]

Cement Concrete 1:6:12 with Stone aggregate 40 mm gauge mixing by mechanical means using concrete mixer volumetric type. [As per CSR-2020 item No. 10.8-b-ii]

Boulder masonry in cement mortar 1:6 in foundation and plinth. (Stone to be spies to the cont (AOR) Slip 1.5)

Boulder masonry in cement mortar 1:6 in foundation and plinth. [As per CSR-2020 Item No. 12.33] ADC slip.5

Cement Concrete 1:2:4 with stone ballast or shingle mixing using concrete mixer by mechanical means using concrete mixer volumetric type. [As per CSR-2020 item No.10.13-a-ii]

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering). [As per CSR 2020 Item No.9.1]

Cement pointing flush 1:2 (flush) on stone walls. [As per CSR-2020 item No.15.63]

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position) Tees angles & channels. [As per CSR-2020 item No.18.1-c].

Structural steel work in angles, tees and flats, riveted or welded including cutting fixing all gusset plates, bolts, nuts, rivets, welding rod, etc. with hoisting and erecting in position. For roof trusses, well curbs, plates and trussed girders, etc. of any span for buildings for bridges upto 15M span. (Through Rate). [As per CSR-2020 item No.18.3-a]

Providing and fixing G.I chain link fabric fencing of required width in mesh size 50 x 50 mm including strengthening with 4 mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer- in-charge.

Applying priming coat with metal primer on new steel or iron work including preparation of surface. [As per CSR-2020 item No.16.20]

Painting two or more coats with aluminium paint to give an even shade excluding priming. [As per CSR-2020 item No.16.25]

Bidder Name

Amount in Words

Chechi Construction Co.

VINOD KUMAR SHARMA

SUBASH CHAND

Harvir Singh Govt. Contractor

SUBASH CHAND

VINOD KUMAR SHARMA

Harvir Singh Govt. Contractor