Providing Lighting system in 24 nos. village in Pundri Constituency Distt. Kaithal (Providing street light in Group-2 villages- Bucchi, Dulyani, Habri, Munnarehri, Rasina, Sakra, Sanch, Sangroli and Sirsal)

Amount

23.8.8 Supply and erection 10-60 A Three phase A.C. energy metre , LCD display and optical port , with rag bolts on wall/existing pedestal including the cost of rag bolts required to complete the job in all respect with necessary connections and bonding to earth. (Make and specification as per UHBVNL).

23.22.1.9 Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 100 amp

23.22.2.1 MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP

23.22.3.1 Supply and erection of sheet steel enclosures 1pole/ 2 pole/4 pole including providing SP/DP/TP/FP MCB on wall/on existing pedestal complete with necessary connections etc, :- SP enclosure suitable for single pole MCB

23.22.5.1 Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp Single Pole

23.27.2 Supply and election of Godrej Almirah type M.S. pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. M.S. pedestal of size 750 mm wide, 900 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 1050 mm* 600 mm* 250 mm below ground level.

24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required.

24.1.6 Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required.

24.2.7.2 Supply and erection of suitable compression type brass cable glands for underground Cable :- 10 sqmm to 16 sqmm Cable 2 to 4 Core

24.2.7.3 25 sqmm to 50 sqmm Cable 2 to 4 Core

24.2.8.4 Supply and erection of aluminium lugs heavy duty including crimping etc. upto the entire satisfaction of the Engineer- in-charge of the work. 16 sqmm

24.4.2.2 Supply and erection of GI bracket made of 32 mm dia medium class GI pipe, having 15 deg angle from horizontal, suitable for fixing on top of Street Light pole 90 cm long, with 20 cm high suitable size pole cap

24.4.3 Supply and erection of 32mm dia metre 1.5 m long bracket (B-class) making an angle of 10° to 15° with horizontal plane for mounting street light fitting fixing of GI. bracket on wall with 2 nos. 32 mm x 3 mm thick M.S. clamps including cost of cutting, welding of G.I. pipe complete with cement sand mixture, bolts and nuts etc. including necessary connections.

24.4.5 Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A bakellite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on bakellite sheet in the M.S. box including painting and necessary connections.

24.4.7.2 Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. 40 mm dia

24.4.8.4 Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakelite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 1 O A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1 :5: 1 O of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 6 Mtr Long pole with top dia 75 mm and bottom dia 150 mm with base plate of size 275 x 275 x 16 mm

24.4.8.6 8 Mtr Long pole with top dia 100 mm and bottom 200 mm with base plate of size 325 x 325 x 20 mm.

24.5.1.1 Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts markd with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect upto the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 1.5 sqmm

24.5.2.3 S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia

24.10.1 Digging & refilling of trench 30 cm wide below ground level for erection of pipe/cable (up depth of 1 Mtr. Underground cable excluding the cost of cable/pipe complete in all respect.

24.10.5 Digging of pucca road of required size for making pit for of foundation for street light pole etc complete in all respect upto the entire satisfaction of Engineer-incharge.

24.10.6 Digging of pucca road in required width for laying of cable / pipe complete in all respect upto the entire satisfaction of Engineer-incharge

NS items Supply and erection of metal clad bus bar chamber 415 volt made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame with 4 No. Copper bars 325mm each (Cross section 20x3mm) duly tinned over all size of the chember 375mmx295mmx140mm. Make Havells/ Standard / HPL / Asco / SSk / Geco.

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 8 metres long 90 mm x 145 mm at top and 90 mm x 290 mm at bottom with working load of 200 Kg. burried 1.6 m in ground. (As per UHBVNL specification and make) including Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1 :3:6) layer on top with including excavation and refilling etc as required (As per HSR 24.4.10.4.)

Pdg. trench less boring below existing road / pavement including laying of 65 mm dia GI pipe B class required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work.

Providing & fixing of stay set complete including stay wire, insulator stay rod etc. complete in all respect upto the entire satisfaction of Engineer-in-Charge (As per UHBVNL make and specification).

Supply and erection of under ground Aluminum Armoured cable XLPE insulated loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab. 16 Sq. mm 4 Core Cable .

25 Sq. mm 4 Core Cable .

Supply and erection of of ISO certified company made XLPE insulated LT Aerial bunched Aluminium conductor cable confirming to IS 14255/1995 and IS 398 (Pt-4)/ 1994 on existing poles through I hook with all necessary T&P and petty material required including binding and twisting etc. complete in all respect up to the entire satisfection of Engineer in charge. Make RR / Havells / Polycab. . 3 X 16 sq. mm. + 1X25 sq. mm. (Bared)

Supply & Erection of double arms bracket made of 50mm dia GI pipe B class ISI 1.50 mtr. Long with 25mm dia bottom pipe GI with coller pipe (GI) 125mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing Octagonal pole.

Supply & Erection of Ring / coller bracket on existing pole with nuts and bolts. Bracket made of 50mm dia GI pipe B class ISI 1.0 mtr. dia ring with 4 no. support 50mm dia bottom GI coller pipe (GI) 100mm dia 60cm Long top covered with ornamental cap duly welded, 4 nos. hole in ring pipe for erection of flood light fitting painted 2 coats of aluminium paints on bracket including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. Bracket duly erected on existing Octagonal pole.

Supply, erection and commissioning of Timelite 63 A. 3 pole / 230V Astronomical time switch Indo Asian / Standard / L&T / Havells / C&S make automatic Timer ON/OFF the street light, pillars, wall, MS pedestal where ON/OFF point is available cabinet is fabricated from 22 gauge MS sheet painted, wiring, connection ON/OFF from the bottom of the cabinet the lite DB IP 54 protection complete with Digital timer, 32A. TPN MCB (Indo-Asian), fuse unit, indication lamp suitable for switch from rectifier system, switching system Bakelite connector 32A. Digital timer, auto / manual system, time setter, fiber sheet rubber & plastic components, wiring & component fitting, chemical (Epoxy) including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

S/E/T/C of 72 watt LED Street Light Luminiaries of Make Bajaj / Halonix / Philips/ Wipro with pressure fie cast aluminium housing with lens and colour 4000 K and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work. (N.S) )

S/E/T/C of 90 watt LED Street Light Luminiaries of Make Bajaj / Halonix / Philips/ Wipro with pressure fie cast aluminium housing with lens and colour 4000 K and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work.(N.S) )

S/E/T/C of 100 watt LED Flood Light Luminiaries of Make Bajaj / Halonix / Philips/ Wipro with pressure fie cast aluminium housing with lens and colour 4000 K and accessories required to complete the job in all respect inculding erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work.(N.S) )

LOHAN ELECTRICAL WORKS