Repair and mantanaince of Officers Field Hostel Building at Baranagar- Gorakhpur

Amount

E/W in excavation of foundation and filling on required places including proper levelling, dressing, manul compaction and T&P etc. complete in all respect.

Kankar/brick ballast consolidation by hand ramming including opening out staks sorting kankar into three sizes,repairing patches or road surface with kankar ,picking up old surface ,spreading kankar making upto retain water ramming and also including of material upto 30 m carriage of water 200M and maintenence of barriers,caution post light at night including all T&P etc. required for proper completion of work excluding cost of kankar.

E/W in filling by power transport within 10 Km. including excavation,loading, unloading, stacking and manualy compaction and dressing including all lift complete in all respect.

Dismantling of old existing damaged plaster/tiles with plaster including disposal of malba within 60 memer as per direction of Engineer-in-charge complete in all respect.

Dismantling brick work of cement mortar including disposal of malba within 60 memer as per direction of Engineer-in-charge complete in all respect.

Dismantling of cement concrete or brick or granolothic floor including base concrete and including disposal of malba within 60 meter as per direction of Engineer-in-charge complete in all respect.

Laying 25 mm thick wearing coat of R.C.C. 1:1.5:3) with 10 mm to 20 mm size crushed stone grit and Kanahar coarse sand (F.M. not less than 2) and nominal reinforcement of 50mm x 50mm 10 MS gauge wire mess including cost of all material labour and T&P etc. required for proper completion of work. of dismantled material with in 60m distance.

Laying plain C.C. 1:2:4 with 4.75 mm to 10 mm size crushed stone Grit and Kanahar coarse sand of F.M. not less than 2 including cost of all material labour and T&P etc. required for proper completion of work.

Laying R.C.C. 1:1.5:3 with 4.75 mm to 10 mm size crushed stone grit and Kanahar coarse sand of F.M. not less than 2.0 including cost of all material labour and T&P etc. required for proper completion of work.

Cutting, bending, binding and placing in position of steel reinforcement including cost of all material labour and T&P etc. required for proper completion of work.

Centering and Shuttering for RCC work in building works

15mm thick cement plaster in 1:4 cement mortor including cement and coarse sand of F.M.not less than 2.00 including cost of all material labour and T&P etc. required for proper completion of work.

Distempering two coat of oil bound distemper of approved make of Berger, Johnson & nicholsen, Shalimar, Asian, Nerolac over one primimg coat on cement primer on new surface after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even with plaster of paris and sand papered smooth including cost of all material, labour , T&P etc. required for proper completion of work.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Painting two coat of synthetic enamel paint on old steel surface with superior quality approved make including cost of all material, labour , T&P etc. required for proper completion of work.

Painting two coat of synthetic enamel paint on old wooden surface with superior quality approved make including cost of all material, labour , T&P etc. required for proper completion of work.

Painting one coat of wooden primer on new wooden surface including thoroughly cleaning of dirty and other foreign matter and sand papering and making smooth surface including cost of all material, labour , T&P etc. required for proper completion of work.

Painting two coat of superior quality of synthetic enamel paint on new wooden surface approved make on new wooden surface (excluding cost of primer) including cost of all material, labour , T&P etc. required for proper completion of work.

Providing and fixing door shutters in existing door frames with 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and fixing sal wood door frames complete in all respecr as per direction of Engineer-in-charge.

Supplying and fixing 40 mm thick commercial quality flush door complete in all respect.

Renewing glass panes, with putty and nails wherever necessary. (i) Float glass panes of thickness 4 mm.

Renewal of old putty of glass panes (length)

Supplying and fixing masquito proof jali having 5 mess in each cm of 24 gauge.

P/F fly proof galvanized M.S. wire gauge to doors with avg width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished maching cut for kitchen platforms, vanity counters, window sills : facias and similar locations of required size of approved shade, colour ands texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated wqith white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.: Granite of any colour and shade Area of slab over 0.50 sqm.

P/F stainless steel kitchen sink with C.I. Bracket excluding cost of other fittings. Kitchen Sink without drain board size 610 x 510 x 200 mm

P/F 600 x 400 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers.

P/F 20 mm dia concealed galvanised mild steel tubes (medium grade) I.S. 1239 (Part-1) complete with fitting and clamps, including cutting and making good the surface or wall etc. complete in all respect. (internal works).

P/F cromium plated fittings with all materials as per direction of engineer-in-charge complete in all respect.

(a) 15 mm dia concealed stop cock.

(b) 15 mm dia bib cock.

(c) 15 mm dia angle valve.

(d) 15 mm dia pillar cock.

(e) 600 x 20 mm wall rail with bracket.

(f) Soap dish with bracket.

(g) 100 mm dia jali for nahani trap.

(h) 32 mm dia brass waste for basin.

(i) 100 mm dia shower rose.

P/F 450 mm x 15 mm nominal PVC connection pipe as per direction of engineer-in-charge complete in all respect.

P/F PVC waste pipe for basin as per direction of engineer-in-charge complete in all respect.

P/F 580 mm size white glazed earthern ware Orrisa pan of approved quality including cost of all material complete in all respect.

P/F 10 litters low level PVC cistern of approved make complete with all assecessories and fittings.

P/F 550 mm x 400 mm wash basin with holes for pillar tap with C.I. or M.S. bracket including cutting hole and making good the same but excluding fitting fittings.

P/F 900 mm x 450 mm size mirror.

P/F in position C.P. brass to wall rail of size 750 x 20 mm complete with brackets i/c making chases in wall and repairing the same in 1:3 CM complete in all respect.

Providing and fixing door closer godrej or equivalent with necessary accessories and screws etc. complete.

Wiring point for light with 1.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire and piano type switch etc. complete in all respect.

Wiring point for fan (lightduty fan) with 1.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire and piano type switch etc. complete in all respect.

Wiring point for plug with 1.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire with piano type switch etc. complete in all respect.

Wiring point for power plug/H-P.M.V/sodium vapour lamp with 2.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire with 15A piano type switch etc. complete in all respect.

Wiring point for exhaust fan with 2.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire with 15A piano type switch etc. complete in all respect.

Providing and laying of factory made 60 mm tyhick rubber moulded interlocking cement concrete tiles 30MPa i/c 25 mm thick compacted bed of fine sand compacting embending/laying of interlocking tiles levelling and dressing of surface to required level and slope filling joints with fine sand i/c the cost of materials, labour T&P etc required for proper completion of work as directed by engineer-in-charge.

M/S NISHU ENTERPRISES