Extension of Lawn Tennis court and other miscellaneous civil works at Health Club at RSA of Chandrapur Area.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

ASPHALTBASC Our Scope: (1) Excavate the surface to creates open of 1 for every 10' on shorter as (2) Compaction of Such Base with 8-10 tonne roller (3) Anti Termite and Weed Growth: Carry out anti termite and weedicide on the total area by applying chemicals and spraying (4) Wet Mix Macadam-150mm Providing and laying of compacted 150mm thickness of WMM in one layer as per specifications and drying up and cleaning the surface. (5) Ruling to be done in both Wet and Dry phases of WMM, (6) Primer coat Providing & applying primer coat over prepared surface or granular base with bitumen emulsion as per 15: BBET & manufacture's specification @6kg./10 Sqm. With a self-propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates & temperatures. (7) BITUMINOUS MACADAM (Bitumen 3.50% by weight) Lay a 35mm compacted thick Hot Mix asphalt BM coarse using mix of 20 mm and 12 mm stone with 60-70 Grade Bitumen. (8) The compaction of BM layer to be done using road roller of capacity 8-10 ton (9) Tack coat Providing & applying tack coat on the prepared surface, with bitumen emulsion as per 15: 8887 and manufacture's specification@2kg/10 Sqm. With a self-propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures. (10) ASPHALTIC CONCRETE (Bitumen by weight) Lay a 25mm compacted thick Hot Mix AC coarse using 6mm stone/Baby chips (Mixture of 0-6mm stones devoid of dust) mixed with 60-70 Grade Bitumen. (11) The compaction of AC layer to be done using road roller of capacity 8-10 ton; SEAL DUST Seal dust to be spread to cover all the voids using stone dust with Bitumen to make the surface appropriate for synthetic installation Cold rolling to Be done immediately next day of applying seal coat in the early morning hours when the climate is cold as compared to rest part of the day

Providing and laying European standards ITF certified 8 layers acrylic synthetic standards system with thickness upto 3mm 1 layer of acrylic primer 2 layers of acrylic resurfacer 3 layers of acrylic cushion 2 layers of colour coat Line markings as per international standards.