Revised Estimates for 01 No. 63 KVA additional dtr at Hansapura (PHE Wala DTR) under sheopur (R) D/C of South dn Sheopur.

Laying and Jointing PVC Pipe. Heading

200 Kg., 9 Mtrs. long PCC pole

11 KV Pin Insulator Polymer Composit (5 KN)

11 KV(45KN) Composite Polymer Disc Insulators

11 KV Strain hardware (T&C type) fittings

1100 Volts Grade Arial Bunch XLPE Cable 3X120 + 1X16 + 1X95 Sq mm. Bare Masanger

140 Kg.,8.0 Mtrs. long PCC pole

Transformer mounting Channel (100X50x6 mm.)

9 KV Gapless type ( 5KA) Polymer for DTR

XLPE Cable 1 core unarmoured 50 sqmm Aluminium conductor 1100 Volts

D.O.Mounting Channel 75x40x6mm

D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel

Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

63 KVA Conventional Distribution Transformers,BIS Certified Level-II (Old)/Level-I(New).

AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)

11 KV D.O. Fuse Unit Polymer type

Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Danger Boards Enamelled 11 KV

M.S.Nuts with Bolts

Bentonite compound powder

Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

Red oxide paint

STAY WIRE 7/3.15 MM.(7/10 SWG)

Galvanized nut & bolt with washer

Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels

Stone Block/Pre cast block for base pedding(450X450X75MM)

G.I.Pipe 40 mm Dia C grade type

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Complete jumpering of DTR

Bi-metallic clamps Distribution Transformers Bushing

Stay set complete without Stay wire 16 mm. (Painted)

Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Concreting of structures & foundation (1:3:6)

Stay Insulators 90X65mm

Aluminium paint

G.I. STRIP 25X3 MM1

Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector-

LT A.B Cable tension clamps (Galvanized)

Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm)

Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)

Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole

L.T. Distribution box with Isolator on Incoming with HRC fuse for 63 KVA DTR (200 Amp. Isolator & 6 SP of 60 Amp.)

Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-

Back filling of poles with boulders.

Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

Clamps for neutral for AB Cable

LT A B cable Suspension clamps (Galvanized)

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

Lumpsum Value

Total value all section

Bifurcation of Erection Value

The Total value of Schedule2

Contractor %

Labour & Transport Amount Shifted Form Company side to Contractor Side

Final amount of Labour & Transport charges (Company side and Contractor Side)

Total Amount Without GST

GST on Transportation@5%

GST on (Material + Labour) @18%

Total Amount With GST

Total Amount For NIT

Please Enable Macros to View BoQ information