GE/C-53/2022-23 REPAIR TO COMPOUND WALL EXTERNAL DRAIN FENCING AND OTHER MISC B/R WORKS ALONGWITH PETTY REPAIRS FOR DAILY WORK IN THE AREA OF ZONE B AND RRRC IN THE AREA OF AGE B/R-I UNDER GE CENTRAL DELHI CANTT-10

Amount

M&L PCC 1:2:4 type Type B-2 (using 40mm graded crushed stone agg) as in surface channel and drains Complete all as specified and directed by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement , including forms, moulds mitred/stopped ends etc Complete all specified and directed.

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground Complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wiremesh, any type Complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) in any type of soil, each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus spoil to distance not exceeding 50 mtr and making good surface complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation filling and mass concrete all as specified and as directed by Engineer-in-Charge..

S&F mild steel as in hand rail, balusters, noising to steps, post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, drilling, bolting or riveting etc, conforming to Fe-290 , Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

S&F 3.15 mm dia galvanised steel chain link fencing, 100X100 mm mesh, made up into mattrsses or cages, lapped, wired a all as specified and as directed by Engineer-in-Charge. Note : 10mm dia bar shall be measured & paid seperately under relevant items.

S&F high quality zinc coated GI Chain link fencing of required width in mesh size 50x50 mm made of GI wire dia not less than 3mm and fix with column with nut or bolts and strengtheing with 10mm TMT bars, conforing to standard grade steel complete all as specified and directed. NOTE:- (i) Payment of TMT bar shall be made in seperate items in this Schedule. (ii) The Engr-in-Charge along with rep of contractor shall verify the weight mesh and submit the copy along with photographic eveidence along with RAR and Purchase Voucher. (iii) The quoted rate shall be inclusive of Nut bolt required.

M&L mild steel round bars 10 mm dia conforming to FE-410-W (Gde E-250) quality A or Fe-290 (Gde E-165) for use in chain link fencing as wind tie all as specified.

Mild steel screw bolts(machine made) with hexagonal or square heads at one end screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 30 cm and dia of neack exc 12 mm but not exc 20 mm complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, all as specified and as directed by Engineer-in-Charge.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in walls with old size bricks, built in cement mortar 1:4, Complete all specified and directed.

All As per item no 32 before but except bricks

M &L 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70 Kg per ltr, water ration 17 to 19 % by weight with compressive str as per IS 4031 part 6 applied as per the manufactore instr including necessaery cement screed and prepartion of surface to received ready mix plaster. Complete all as specified and directed by Engineer-in-Charge.

Dismentling wrought iron or mild steel work of any description not otherwise provided for roof trusses and purlins complete all as specified and as directed.

S&F Steel work in tubular trusses or frame, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed.

ditto- but except mild steel obtained from dismantling from item No - 23 above.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removal of rubbish outside complex ( MoD land), complete all as specified.

Taking down cement plaster of any description on brick or stone wall incl raking out joints, hacking for key, scurbing down with water etc Complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MoD land), complete all as specified.

M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth Complete all specified and directed

M&L for 15mm thick screed bed in CM ( 1:6) Complete all specified and directed.

M&L for Coloured Cement concrete Chequered tiles PU Coated 25cm x 25cm x 20mm thick, machine pressed;with greyu cement and no pigment set jointed and pointed in neat cement slurry in floors, and cut and polished Complete all specified and directed

M& L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in bencing/ copong concrete. Complete all as specified and as directed

M&L for machine pressed precast concrete PU Coated interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 80mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed.

Checking the leakage and petty repairs/replacement to Wall Mixer, WHB Mixer, Sink Mixer, bib taps, Pillar taps, Stop cock, Conceled stop cock, angle valves, gate valves etc of any description or size for stopping leakage of water by changing washers, etc complete all as specified and directed by Engineer-in-Charge. Note: Material reqd for replacement of fixture/fitting shall be paid under relevant item of supply only.

Repairs to low level flushing cistern syphon, washers, handles, float valves, stopping leakage of Down pipe by applying m-seal and other related works of to make the flushing cistern functional complete all as specified and directed by Engineer-in-Charge.

Removal of air lock, blockage of water pipes from OHT tanks to supply point and repairs/adjustment to float valves, applying of M-seal in tanks and all other connected works of water supply from Over head water storage tanks / PVC tanks complete all as specified and directed by Engineer-in-Charge.

Repairs to 50mm/75mm/100mm PVC or CI Pipes, Branch pieces, Tee Junction, Sockets, Door plates, floor traps, Nahani traps, EWC lip ring half S set incl all fittings to make the pipe functional complete all as specified and directed by Engineer-in-Charge.

Petty repairs to joinerys works, such as easing/adjusting of door, repairs of wire mesh, cub board shutters, iron mongerys, false ceiling works of any type or description and any type of carpentery works etc Easing of window shutters/CB shutters (One unit shall comprise of one window/CB/Showcase irrespective of number of leaves) for properly closing/opening , tightening of hinges or changing the position of hinges, adjustement of tower bolts sliding bolt etc complete all as specified and directed by Engineer-in-Charge.

Petty repairs to joinerys works, such as replacement refixing of glass panes, wiremesh, glass putty, aluminium beading, door closure, any type of handles, Tower bolts, hinges, sliding bolts, rubber beading, door seal, piano hinges,floor door stopper, etc complete all as specified. Note: Fixture/Fittingreqd for replacement shall be paid under relevant item of supply only.

M&L petty repairs to plaster, floor, plinth etc and like by PCC 1:2:4 Type B0 and plaster in CM 1:4 incl preparing roungening and cleaning the surface, and neat cement slurry as required making good, finishing even and smooth without using extra cement in patches area n exc 0.50 Sqm each patch and removal of rubbish off the premises complete all as specified and as directed.

M&L petty repairs to wall tiles, floor tiles, skirting, dado, kota stone , granite stone, RCC Jali, window cill, door jambs, ceiling plaster, fixing of EWC and IWC and neat cement slurry as required making good, finishing even and smooth without using extra cement in patches area n exc 1.00 Sqm each patch plaster, floor, plinth etc and like by PCC 1:2:4 Type B0 and plaster in CM 1:4 incl preparing roungening and cleaning the surface, and removal of rubbish off the premises complete all as specified and as directed.

Supply only Sheet glass, 3mm thick ordinary quality, in squares n exc 0.50 sq. m each pane glazing with oil putty or glazing clips or wooden beadings, aluminium beadings etc complerte all as specified and directed by Engineer-in-Charge.

Supply only Stainless steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire stapple etc on 2nd class HW wooden/ fillets (15mmx15mm) duly painted with synthetic enamel paint complerte all as specified and directed by Engineer-in-Charge.

Supply only two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge.

Supply only 250mm long aluminum alloy anodised sliding door boll with hasp staple balt-type and fixing clips of sheet case or extruded sections and fixing bolls and sliding bolls extruded sections or case aluminum alloy complerte all as specified and directed by Engineer-in-Charge.

Supply only 150mm long extruded alumiunium alloy handle fabricated type anodized (D type) complerte all as specified and directed by Engineer-in-Charge.

Supply only 150 mm size aluminium, anodised barrel tower bolts of extruded section and fixed to shutter complerte all as specified and directed by Engineer-in-Charge.

Supply only Stainless steel drapery rod 20 mm of dia ,with bracket including premium balls complerte all as specified and directed by Engineer-in-Charge.

M & L for Welding in repairs n. exc 2.5cm in length Thickness of Metal to be welded is not exc 6mm thick complerte all as specified and directed by Engineer-in-Charge.

Supply only vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.

Supply only vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet complete all as specified and directed by Engr-in-Charge,

Supply only 10 ltrs PVC (White) valve less syphonic action type, flushing cistern low level with inlet ball valve float, handle, Aluminium brackets for bottom support fixing with gitties embeded in wall with drilling machine etc complerte all as specified and directed by Engineer-in-Charge.

Supply only PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cistern to EWC/IWC complerte all as specified and directed by Engineer-in-Charge.

Supply only vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified

Supply only Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complerte all as specified and directed by Engineer-in-Charge.

Supply only plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complerte all as specified and directed by Engineer-in-Charge.

Supply only stainless steel toilet paper holder with gutties and steel screws on walls complerte all as specified and directed by Engineer-in-Charge.

Supply only stop valve cast copper alloy screwed down high pressure with cruch or butterfly handle screwed both ends for iron pipe or for union and fixed for 15 mm bore complerte all as specified and directed by Engineer-in-Charge.

Supply only angle valve 15mm dia fancy type chromium plated all as specified and directed by the Engr-n-charge

Supply only suitable for 15mm dia brass chromium plated pillar tap with fly nuts capastan head screwed down high pressure with or without lettered hot or cold with long scewed shank complerte all as specified and directed by Engineer-in-Charge.

Supply only 15 mm dia Brass CP 3-in-1 wall mixer for mixing hot & cold with L bend water screwed down for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.

Supply only 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.

Supply only bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified

Supply only stainless steel soap dish complerte all as specified and directed by Engineer-in-Charge.

Supply only CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complerte all as specified and directed by Engineer-in-Charge.

Supply only brass spindle/phase suitable for 15mm dia bib cock, stop cock, conceled stop cock, angle cock, wall mixture, basin mixture etc of any type or size complerte all as specified and directed by Engineer-in-Charge.

Supply only Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

Supply only 32mm bore and 75cm long PVC waste pipe for WHB complerte all as specified and directed by Engineer-in-Charge.

Supply only PVC connection pipe of 15mm X 600mm " size with 2 Nos brass check nuts with washers,complerte all as specified and directed by Engineer-in-Charge.

Supply only fancy type looking mirror of size 600x450x6mm with 100 mm wide fancy type border fixed with 4 Nos stainless steel clips complerte all as specified and directed by Engineer-in-Charge.

Supply only Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

Supply only Glass shelf assembly5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

Supply only of 15mm bore size PTMT bib tap complerte all as specified and directed by Engineer-in-Charge.

Supply only stainless steel plate rack of size 90x80x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.

Supply only steel sink with drainage board made out of 0.80mm thick sheet for kitchen with plug, washers, waste pipe incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.

Supply only chromium plated grating (round) 125mm dia fixed over floor/nahani trap (with hole and without hole) complerte all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top )composite type or lid should be thread type) hoisted and fixed in position with 20mm dia brass float valve including taking out existing unserviceable overhead tank of any description complerte all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded polythylene 500 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top )composite type or lid should be thread type) hoisted and fixed in position with 20mm dia brass float valve complete including taking out existing unserviceable overhead tank of any description complerte all as specified and directed by Engineer-in-Charge.

Supply only 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complerte all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

M & L for Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured) complerte all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks of 500& 1000 litres capacity and from mouths of circulating pipes, etc and applying bleaching powder for cleaning on tanks complerte all as specified and directed by Engineer-in-Charge.

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.

Supply only 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, waste and vent pipes in any length with or without ears, fixed in walls/floors/ trenches etc complerte all as specified and directed by Engineer-in-Charge.

Supply only 100mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complerte all as specified and directed by Engineer-in-Charge.

Supply only 75mm dia sand cast Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed in walls/floors/trenches etc complerte all as specified and directed by Engineer-in-Charge.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

M&L for glazed coloured ceramic tiles (300x600mm) x6 to 7mm thick in dado etc set and jointed in neat cement slurry and pointed in coloured cement to match incl 10mm thick backing coat in cm 1: 4 complerte all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles (300x300mm) x6 to 7mm thick in floor etc set and jointed n neat cement slurry and pointed in coloured cement to match incl 15mm thick secreeding in CM 1 : 6 complerte all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast cement concrete inter locking paver block any shap and size ,60 mm thick M-35 grade , confirming to IS 15658-2006, over 75mm tkick PCC type D-2 1:4:8 (40 mm graded aggregate) all as specified.

S&F Cequered cement concrete tiles with grey cement and pigment 30cm X30cm X22mm thick set jointed and pointed in neat cement slurry in floors and including 75mm thick cement concrete type D-2 1:4:8 and incl 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

Taking down cement plaster from brick or concrete surface incl racking out joints hacking for key and scrubbing down with water complete including removal of rubbish off the premises complerte all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of four storey bldg ,including scaffolding complete.

Demolition of brick work built in cement mortar of any position or description complerte all as specified and directed by Engineer-in-Charge.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

Demolition of reinforced cement concrete as in roof slabs, chajjas, fins, facia, parapet, drops, railings, beam, lentils, cover slabs, and similar other works as directed including cutting of steel reinforcement to facilitate dismantling complerte all as specified and directed by Engineer-in-Charge..

Material and labour for precast RCC 1:2:4 type B-0 45mm thick (measured solid) as in louvers, jallies including set in CM 1:6 complete including demolition of existing jallies all as specified. and directed at varying height from G.F. to G+5 Floor complerte all as specified and directed by Engineer-in-Charge..

Supply only 15 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

Supply only 20 mm bore GI fittings such as union, Socket, Tee, Elbow, Nipple 4" 6", Reducer, Plug, and tank nipple complete all as specified and directed.

Supply only PTMT waste coupling 32mm dia for sink.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks, roof truss and similar work incl welding and drilling con- forming to Fe.290.Gde-E-165

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridges/gutter to wall, fixed with self tapping screws as specified

Dismantling of wall and ceiling board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work

M & L for snap grid ceiling with E - board ceiling tiles of size 600x600mm 4mm thick incl aluminium alloy anodised at edges angle 25x25x1.5mm and tee section 38x38x1.5 mm at other than edges both ways fixed with 4mm dia gi wire including two coats of oil bound distemper

Schedule of Credit

VED PRAKASH ARORA