PROVISION OF 01 TOILET BLOCK AT 972 TPT COY ASC UNDER GE EAST DELHI CANTT 10

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads, path, Bldg etc including required slope gradient, camber etc if required complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soil complete all as specified.

Removing excavated material (soil) n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation complete all as specified & directed.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in foundations footings, plinth beams etc all as specified & directed.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in columns, pillars etc all as specified & directed.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in beams, lintels etc all as specified & directed.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in chajjas etc all as specified & directed.

M&L for RCC M-25 design mix (20mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified.

M & L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintes,cantilevers, shelves including supports, overhangs, etc also splays between floors and beams finished rough surfaces of concrete complete all as specified.

Formwork to chajja,chullah hood,and similar items complete all as specified.

M & L form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified.

M&L brick work with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:6 all as specified and as directed.

M&L half brick wall with sub class B bricks, straight or curved on plan exc 6 m mean radium built in CM 1:4 all as specified and as directed.

M & L hardcore of broken stone or boulders of gauge exc.63mm but n exc 100mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L Rendering 5mm thick on concrete surfaces in CM 1:4 as on ceiling all as specified and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified & as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of plain color PVC sheet to be fitted in the MS frame, welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent complete all as specified & directed.

M&L aluminum alloy powder coated (50 micron) door shutter of aluminum section of size 85 mm x 44 mm x 2 m thick, top rail and both styles of size 100mm x 44 mm x 2mm thick,lock rail and bottom rail of size 115 mm x 44 mm x 2 mm thick including aluminum anodized snap beading and rubber packing & 5.5 mm thick froasted designer glass (as approved ) or 12mm thick partical board (pre laminated both face)exterior grade , 100 mm long aluminium butt hinges - 04 Nos in each leaf, 200 mm long tower bolt-2 Nos in each leaf, 200 mm long fancy type Alm handle- 02 Nos on each leaf, 4 lever brass 100 mm long mortice lock, & double action floor door spring heavy duty suitable for 1 m wide shutter for each leaf and area of each shutter not exc 2 Sqm complete all as specified and directed.

S & F aluminium colour power coated anodised (shade or tint as directed by GE) window/ventilator frame section 100x44x2mm fixed with thrust bolt in walls by drilling (any number of leaf) complete all as specified and directed the following : - (a) Aluminium colour anodised (shade or tint as directed by GE) shutter 44x44x2mm top/bottom/sides style. (b) Aluminium colour anodised butt hinges 4 Nos in each window 100mm sizes as per spd. (c) Aluminium colour anodised tower bolt 3 Nos in each window 150mm long as per spd. (d) Aluminium colour anodised handle 2 Nos in each window 150mm long as per spd. (e) Tinted glass 5 mm thick . Make- Saint gobain modigaurd. (f) Aluminium Anodized colour coated grill make deco grill DG-104 fixed with For H Section. Make : - Jindal or equivalent.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base complete all as specified.

M&L Non skid ceramic tiles (400x400x7mm thick) in floors set and jointed in neat cement slurry and painted with colour cement to match including Screed bed (or) bedding layer of mortar 15mm thick in cm (1:6) for laying floor finishes complete all as specified and as directed.

M&L Glazed ceramic tiles 300x450x7mm thick, in vertical surfaces such as skirting & dados set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat of 10mm thick CM 1:4 on brick masonry/concrete surfaces finished even to receive tiles complete all as specified and as directed.

M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement complete all as specified.

S&F125 mm long,aluminium,anodised, barrel tower bolts of extruded section all as discribed.

S&F 125mm size aluminium handles,cast type,anodised all as directed.

S&F 100mm butt hinges extruded aluminium alloy with galvanised MS pin anodised type C22 all as specified and as directed.

S&F rotational moulded polythene water storage tank three layered (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity including PVC tank nipples,complete all as specified in SSR Part I including dismantling of existing tank and removing to store.

S & F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified.

S&F ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 20mm dia iron pipe and fixed.(Minimum weight 210gm) complete all as specified and directed.

S&F Hold fasts made out of MS flat 25x3mm all as specified and directed.

Supply only integral water proofing compound complete all as specified.

Material and labour for APP polymaric water proofing membrene minimum 3mm thick and weighting not less than 3.6 kg / sqm of make 'Moply FP' manufactured by STP Texsa Ltd or' equivelent in other makes as per list, black finished reinforced with non weven polyster matt,with fusable finish laid over compatable bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or abutane gas torch, with over lap of 75mm at the sides and100 at the ends and sealing all as per manufactur's instructions including preparation of surface, complete all as specified and as directed. Note : the water proofing treatment shall be carried out by the manufacturer or their authorised applicators.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M&L three coat of white wash including preparation of new surfaces as on walls complete all as specified and as directed.

M&L three coat of white wash including preparation of new surfaces as on ceiling complete all as specified and as directed.

Cutting chases, pinning in , for concealed water tubing on block walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified..

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore complete all as specified..

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore complete all as specified..

S&F 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms) for iron pipe or for brass ferrule all as directed.

S & F PVC connection 15x450mm size complete all as specified.

Supply only 10 Ltrs (PVC) white, valve less, syphonic action type, dual type flushing cistern, low level with inlet ball valve, float and top push button type, complete all as directed. Note:- The rate for fixing flushing cistern are deemed to be included with the rate of fixing water closet any type complete all as specified.

Supply only 32mm dia flush pipe of polythelene of low or high density, for low or high level flushingh cistern. Note:- The rate for fixing flush pipe are deemed to be included with the rate of fixing water closet any type complete all as specified.

M&L Cast iron floor trap, with grating,100mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and as directed.

S&F vitreous china,white, wash hand basin, ovel type size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified.

M&L 18- 20 mm thick granite stone slab of any type with table rubbed and polished beded and jointed with grey cement slurry and pointed in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including 15mm thick screed bed in CM 1:6 and grinding and polishing complete all as specified and directed.

S&F soap dish (approx size 160x160x90mm) chromium plated fixed with chromium plated brass screws complete all as specified.

S&F 20mm dia brass chromium plated tubular towel rails,D type,60cm long between flanges,complete all as specified.

S&F 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe all as directed.

S&F 125mm size chromium plated shower rose with or without swivel joints including fixing to steel pipes or butterfly handle screwed both ends for iron pipe complete all as specified and directed.

S&F stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified.

S&F 32mm PVC waste pipe spring type including fixing to wash hand basin complete all as specified and directed.

S&F 75mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall or laid in trenches or in floors including MS clamp made out of 40x6mm MS flat iron and 12mm dia round stay ,bolts and nuts fixed to walls in CM 1:3 complete all as specified.

S&F 100mm Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall or laid in trenches or in floors including MS clamp made out of 40x6mm MS flat iron and 12mm dia round stay ,bolts and nuts fixed to walls in CM 1:3 complete all as specified.

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone agg) as in foundation,filling mass concrete etc complete all as specified & directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunchings against the sides of pipe after they are laid and tested for 150 mm dia SGSW pipe complete all as specified & directed.

S&F 150mm internal dia of double wall PVC pipes (DWC PE) pipes laid in trenches and B111jointed with cement mortar 1:3 complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150 mm dia pipes complete all as specified and directed.

M&L precast RCC 1:2:4 type B1 as in landings, cover slab, manhole cover ,chajjas etc.and similar articles including form work with plain faces set in CM 14 complete all as specified and directed. Note :- Reinforcement shall be measured and paid seperately.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps,and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, all as specified and directed.

Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC conduit medium grade ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty conductor, fabricated branded metal flush box duly make embossed, concealed in walls with suitable Hylam Sheet for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:-

(a) One light/Fan/Bell point controlled by one switch

(b ) One socket outlet point 5 Amps controlled by one switch on same board along with other switches.

(c) One socket outlet point 5 Amps on independendent board

Supply and fixing of Switch piano flush type, single pole, one way, 5/6 Amps complete all as directed.

M&L for socket 2-in-1 5/6 Amps universal type complete all as specified and directed.

S&F LEDtube light fitting diffused type suitable for 22 Watt to use retrofit T-5 LED tube light with extrubed aluminium heat sink for efficient heat disspiation alopng with integrated HF electronic driver complete all as speciofied .

Material and labour for laying of LT underground cable of size 25 Sqmm 2 Core,insulated, PVC sheathed, galvanised steel strip/wire armoured, aluminium conductor, 1100 volts grade, suitable for earthed system laid in duct/trench/along pole/wall etc including making connection complete all as specified and directed. Note : 1. The cost of AI thimbles/lugs and cable galnd etc is incl in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and brick protection etc will be measured and paid seperately.

M&L sand cushioning with a layer of fine sand 8cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified .

M&L for brick proctection to cable using old size class 'B' bricks, laid flat, dry but jointed, laid lengthtwise perpendicular to the axis of cable complete all as specified and directed.

M&L for Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed. Note : The cost of MS sunken box and bakelite sheet is included in the quoted rate.

Supply and fixing of fresh air fan 250 mm sweep plastic body incuding self closing louver and making all electric connections complete all as directed.

S & F of LED Mirror light 10/ 12W diffuser, driver and making all electrical connections complete all as specified and directed.

M&L for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC concealed conduit 25 mm dia with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as directed. Note :- The conduit and conduit accessories shall be measured and paid as one unit.

Supply and fixing of sheet metal enclosure, SPN type with two pin & earth plug and socket (Industrial type DB) with and including one MCB SPN, C Curve type of capacity 32 Amp, 10 kA complete all as directed.

Supply and Fixing of geysers 50 ltrs capacity 5 star rating with glass lined stainless steel tank complete including necessary nuts, bolts and including making necessary electric/water connection including mason works complete all as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyster or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, and making all necessary connections as specified and directed

M&L for MCB, SP 10 KA C curve, 10 to 32 Amps, Single Pole all as specified and directed

M&L for MCB, SPN 10KA C curve, 40 to 63 Amps, SPN all as specified and directed

Supply and fixing of LED security light luminaire 45 watt (white) pressure die cast aluminium housing with heat resistance toughned glass & IP-68 protection with and including driver/transformer complete all as specified and directed.

Supply and fixing of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

M& L for laying tubes light grade 50mm bore with all fitting in trenches for cable protection complete all as specified and directed.

Material & Labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No. 3 on serial page No 497 of SSR Part I- 2009 and connecting to main switch board/Main DB's including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm centre to centre both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Agle iron 40x40x3mm frame for pit cover including testing on completion complete all as specified and directed.

GURBAX SINGH AND CO.

S D Constructions

M/s Shubh Enterprises