REPAIR AND REPLACEMENT OF JOINERY FLOORING PLASTERING AND SOME OTHER MISC WORK IN OTM ACCN IN ZONE-III AREA AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level )

M & L 100 mm thick for Cement concrete 1:2:4, type B-2 (40mm graded aggregate), on sub base to floor.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F light shade Vetrified Ceramic tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over 15mm thick screed bed in CM (1:4) complete .

S&F light shade Vetrified Ceramic tiles edge cut 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,on vertical surface such as skirting dado and wall etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick plaster in CM (1:4) complete.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match and laid over 15 mm thick screed bed in CM (1:4) or tile addessive all as directed by Engineer-in-charge.

M&L for coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in CM (1:4), complete all as directed by Engineer-in-charge.

S&F Glazed ceramic tiles (300x200mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM (1:4) finished fair and even all as specified and directed by Engineer in charge

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 15 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed by Engineer-in-charge.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles

M & L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)

Brick work curved to plan with mean radius n. exc. 6m with bricks roughly cut to radius or bricks with wedge shaped joints except brick

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces including finished even & smooth without using extra cement on ceiling.

M & L 3mm thick wall care putty on wall

M & L 3mm thick wall care putty on ceilling

M&L for preparation of new plastered surfaces and applying two coats of Oil bound distemper of approved shade/tint over Birla wall care putty on walls all as specified & directed by Engineer-in-Charge. (Note: Birla Putty will be measurement and paid separtely).

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade over Birla wall care puty on walls all as specified & directed by Engineer-in-Charge (Note: Birla Putty will be measurement and paid separtely).

All as per item No 19 above but on ceiling.

S&F in repair sink made of stainless steel 1.0 mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 1197mm x 457mm bowl size 406 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete. Make of sink - Nirali, Neelkanth, Jayana.

M&L for preparing of old paianted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synethic enamel paint on wooden surfaces all as specified and directd by Engineer-in-Charge

All as per Srl No. 23 above but one coat of paint on steel surfaces.

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified.

All as per Ser Item No 25 above but pin headed figured glass 4mm thick

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

All as per item No 27 above but area n exc 1.50 Sqm each.

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each

S & F Auto close hinges,stainless steel, bright finish or electrogalvanised fixed in repair

M&L of 19mm thick MDF board in Shelf and shutters and partiation of kitchen cabnait including fixed in repair

S&F brass handle of 100mm size cast type, polished bright.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium handles 125 mm size, cast type, anodised

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed.

S&F MS spring hinges 300 mm, ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden/ angle iron chowkats including welding and MS flat iron all as specified .

Harrison rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc. fixed in repair

Mortice latch with two levers (vertical Type), brass body and fixed in repairs

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

Aluminium Powder coated frame for holding of two track sliding shutter fixed type with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etcand beading for fixing of galvanised wire wire mess complete all as specified

Aluminium Powder coated frame for door and fixed frame etc with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etcand beading for fixing of galvanised wire wire mess complete all as specified

Anodised aluminium door shutters aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. complete all as specified

Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified

Resecuring shutter without taking down Chowkats or frames not exc. 1.5 sq. m each

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

M & L for 2nd class hardwood, factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S & F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats.

M&L for 19 mm thick coloured cabinet door shutter made out by MDF boards pre laminated both side with PVC coated lipping work on edge of shutter for cupboards including fixed in repair

Resecuring or easing & adjusting, without taking down Shutters of any description exc 1 sq.m but n exc 2 sqm each

Refixing Shutters of any description exc 1 sq. m and n exc 2 sq. m each

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed IN REPAIR

M & L for surface preperation by removal of all loose particle to ensure clean smooth and dry sruface and laying 25mm thick pcc type B-0 (1:2:4) using 12.5mm graded stone aggregates finished even and smooth without using extra cement to cover negative slope into prop with WPC @ 3% by weight of cement

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions.and one one coat of bitumen @ 1.2 kg/ sqm befor application of aluminium paint over APP membrane

M&L one coat of Aluminium paint over APP Membrane all as specified and directed by Engineer -in - chage

S&F in Repir CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn complete all as specified .( Make :- MARC,KINGSTON, HINDWARE).

S&F PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. Make - PRAYAG/SIMET fixed in repair.

S&F in repair CP fancy Type center hole basin mixer 15mm bore cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn and fixed in repairs .and complete all as specified .( Make :- MARC,KINGSTON, HINDWARE)

S&F in repair CP wall Mixer with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn 15mm bore for mixing hot & cold water and complete all as specified .( Make :- MARC,KINGSTON, HINDWARE)

M&L Towel ring of brass CP Squar flange (Make-CERA MARC, JAQUAR) and fixed in repairs

S&F in Repairs of Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colour complete all as specified .( Make :- MARC,KINGSTON, HINDWARE)

S&F in Repairs of CP concealed stop Cock fancy type with long shank & cup cast copper alloy screwed down high pressure with crutch/butterfly handle screwed both end for iron pipe 15 mm bore complete all as specified .( Make :- MARC,KINGSTON, HINDWARE)

S&F in Repairs of Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour complete all as specified .( Make :- MARC,KINGSTON, HINDWARE)

S&F in Repairs of CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn.complete all as specified .( Make :- MARC,KINGSTON, HINDWARE)

Dismantling of old existing unserviceable WHB glazed and S&F vitreous china wash hand basin white of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets including cutting for and pinning in ends of brackets or erecting stand complete in repairs.

S&F in repairs waste fittings brass chromium plated 32mm dia for wash hand basin all as specified (Make : PARKO/GMG)

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity ( Make-HINDWARE CAT PART SLEEK PLUS or equivalent) fixed in repair

S&F of CP pressure JET for EWC including flexible pipe for 15 mmdia bore fixed in repair.

Dismantling of old U/S grating and M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap.( Make Paryag and equilant ) fixed in repair.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore

20 mm bore

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling of old water tanks

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity including Dismantling of old water tanks

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule fixed in repair.

S&F in repairs elegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm all as specified (Make : Paryag/ Commander) fixed in repair.

Soap dish brass CP ((Make-CERA CAT PART NO CA 103 or equivalent of MARC, JAQUAR) fixed in repair

Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws(Make-CERA MARC, JAQUAR) fixed in repair

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over 25 mm thick sand cushoning all as directed by Engineer-in-Charge.

Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types

M & L Machine cut kota stone slab flooring 20-25mm thick over and including Screed bed or bedding layer or mortar 15mm (1:4) thick for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including Screed bed or bedding layer or mortar 15mm (1:4) thick for laying floor finishes and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L Chequered cement concrete tiles 20cmx20cmx25mm thick, set,jointed and pointed in neat cement slurry in floors.

Dismantling wrought iron or mild steel work of any description

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering

Excavation in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.

PCC 1:3:6 type C-2 (using 40 mm graded stone agg) in fdn filling and mass concrete.

M&L for rolled miled steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated)conforming GDE Fe 410-S

MS rolled sections as in trusses, purlins, crane gantries and heavy brackets framing etc, (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W complete.

M&L for Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with L-type of J-type hook bolts in lieu of screws and washers in roofs etc .

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S & F Solid PVC Wall Lining consisting of 5mm thickwood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

M/s Radhey Enterprises

Deep Construction Company

J.J.ENGINEERING

Shiv Construction Company