Renovation/maintenance of Urban Health and Wellness Centre at 03 (three) Locations under Itanagar and Naharlagun

Amount

Particulars

Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Providing and laying in foundations and plinth cement concrete 1 : 3 : 6 (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Providing and laying in foundations and plinth cement concrete 1 : 2 : 4 (1cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering.

Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1:3 (1 cement : 3 fine sand ) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1 .5 coarse sand :3 stone aggregate 20 mm nominal size)

Centring and shuttering including strutting proping etc. and removal of form work for: a) Foundation, footings, bases of columns etc. and mass concrete

c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height)

Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/ TMT steel

Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand)

Half brick masonry (with best available local bricks) in cement mortar 1:3 (1 cement : 3 coarse sand) in foundation and plinth.

Extra for half brick masonry in superstructure above plinth level and up to floor two level.

Providing approved best available local wood (Class-BII) work in frames of doors, windows clerestory windows and other frames,wrought framedand fixed in position

Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position.

Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including aluminium butt hinges with necessary screws

Providing and fixing 40x3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1:3:6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size)

Providing and fixing MS grills of required pattern in wooden frames of window setc with MS flat, square or round bars with round headed bolts and nuts or by screws.a) Ornamental grill.

Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete a) 300 x 16 mm

Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete a) 300 x 10 mm

Providing and fixing aluminum Handles anoised transparent or dyed to required color or shade with necessary screws etc complete a) 125 mm

Providing and fixing MS Hooks and Eyes.b) 150 mm

Steelwork rivetedor bolted inbuilt upsections, trussesand framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint b) In Tees, Angles, Flats and Channels

Cement concrete flooring 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. c) 75 mm thick

Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finishedwith a floating coat of neat cement, including rounding of junctions with floor. a) 21 mm thick

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete a) Size of Tile 500 x 500 mm

Providing corrugated G.I. sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding thecost of purlins, rafters and trusses. a) 0.80 mm thick GI sheet

Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia.G.I. limpet and bitumen washers complete.a) 0.80 mm thick GI sheet

Providing and fixing 12 mm thick insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately).

Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. a) Best local approved quality wood.

Extra for making chamfered edges of beading.

Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 (1 cement : 2 fine sand) b) 100 mm diameter pipe

Providing and fixing M.S.Holder bat clamps of approved design of C.I. or S.C.I. pipes embedded in and including cement concrete block 10 cm x 10 cm x 10 cm of 1:2:4 mix (1cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) including cost of cutting hole sand making good the wall etc b) 100 mm diameter

Providing and fixing on wall face C.I. accessories for rain water pipes including filling the joints with spun yarn soaked inneat cement slurryand cement mortar 1 : 2 ( 1 cement: 2 fine sand). a) 100 mm diameter

12 mm cement plaster 1 : 3 (1 cement : 3 fine sand).

15 mm cement plaster 1 : 3 (1 cement : 3 fine sand)

White washing with whiting on new work (three or more coats) to give even shade.

Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade.

Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work

Painting two ormore coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1:3:6 (1cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on side sand bottom and plastering on all exposed surface swith 12 mm thick cement mortar 1 : 3 (1cement : 3 fine sand) including shuttering complete.

Funniture (Steel Almirah, Table, Chair, Steel Rack, Refregetor and Water Heater)

Add 12.5 % for internal Electrification

Add 12.5 % for internal Sanitary and Water Supply

Carriage of material

M/s Tah Enterprises (BID ID -7622)

GMG ENTERPRISE (BID ID -7624)