PROVISION OF CERTAIN SANCTIONED WORKS AT SHARIFABAD MIL STATION AND 2 RR BN UNDER AGE (I) CIF (K).

Amount

B/R WORKS:- Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and as directed by the Engineer-in-Charge

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, for laying of cable and foundation of poles, stays etc. n exc 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil, complete all as specified and as directed by Engineer-in-Charge.

M&L 150mm thick hardcore of guage brocken boulders & stone n.exe 63mm, deposited spread and levelled in layers n.exe 15cm thick, watered and rammed in two layers a true surface a true surface all as specified and directed by Engineer-in-Charge.

M&L Plain cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in foundation, filling etc all as specified and directed by Engineer-in-Charge.

Brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer , complete all as specified and as directed by the Engineer-in-Charge.

Plain cement re-inforced concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintels upto 1.50 metres clear span, steps, seismic and other similar bands, coping, bed plates for serving hold fasts, filling in mild steel frames etc. and the like including weathering slighting rounded or chamfered angles and throating, and use of form work (straight or curved), complete all as specified and as directed by the Engineer-in-Charge.

M&L 150 mm thick PCC 1:2:4 type B2 (40 mm graded stone aggregate) as in floors laid in panels, rough finished Finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge.

Frame work such as grills,gate and intricated design incl MS angle,MS channel,flat iron, rounded bars,MS plate etc with ends of bars shouldered and or riveted or forget in to spikes incl welding as directed and fixed with screws, bolt etc incl dismantling of existing gate/grill conformimg to Fe 290,Gde E-165 complete all as specified as directed by the Engineer-in-Charge.

TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and as directed by Engineer-in-Charge.

E/M WORKS:- M&L for Point wiring with 15 Amp socket point including 2.5 sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade for phase and neutral and including PVC casing caping/conduit pipe of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts, 2.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6 mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall ,covered with 3 mm thick plastic laminated for mounting of switches, socket, fan regulators etc., complete all as specified and directed by the Engineer-in-Charge .

M&L for Point wiring with 15 Amp socket point including 4 sqmm copper conductor (Multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade for phase and neutral and including PVC casing caping/conduit pipe of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts, 4 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6 mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall ,covered with 3 mm thick plastic laminated for mounting of switches, socket, fan regulators etc., complete all as specified and directed by the Engineer-in-Charge .

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pieces etc complete all as spd and directed by Engr-In-Charge Make: Havells, Bajaj,Crompton Greaves ,Phillips or as approved make list of E-In-C's branch.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pieces etc complete all as spd and directed by Engr-In-Charge Make: Havells, Bajaj,Crompton Greaves ,Phillips or as approved make list of E-In-C's branch.

S&F Steel water tubing of nominal bore 15 mm, medium grade galvanised with all fittings including short lengths, fixed to walls and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), including cutting and making good to disturbed plasterd surface of wall complete all as specified and directed by the Engineer-in-Charge.

S&F Bib taps, 15mm bore, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle, screwed down, screwed for iron pipe, or brass ferrule and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F Stop valves/angle valve 15mm bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F switch socket combination 5/15 Amp complete all as spd.

S&F Sheet metal enclosure DB enclosure factory made (double door) shutter type for DB SPN horizental type, 240 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and as directed by the Engineer-in-Charge.

MCB SPN, 40-63 Amps, 230 volts, 10 kA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

MCB SP, 5 -32 Amps, 230 volts, 10 kA rupturing capacity, 'C' curve type, including taking down old existing, complete all as specified and as directed by the Engineer-in-Charge.

S&F signle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB capacity 10 Amp complete all as spd and directed.

Replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 6 sqmm complete drawn in and including casing caping/PVC conduit ISI marked of suitable size and its accessories along with 1x 6 sqmm PVC insulated unsheathed copper conductor cable, multi stranded for continuous earth wire including making good the disturbed surface, complete all as specified and directed by the Engineer- in-Charge. Note :- 2+1 run of 6Sqmm cable including casing caping/PVC conduit of suitable size shall be measured as one running metre.

M/S CLASSIC JK SUPPLIERS (BID ID -3139987)

M/s Asif Enterprises (BID ID -3144675)