Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹24.3 LAdmitted-Finance | -28.04% | ₹24.3 L | L1 | Admitted-Finance |
| 2 | L2₹25.1 L+₹79,011.22 (3.25%)Admitted-Finance | -25.70% | ₹25.1 L+₹79,011.22 (3.25%) | L2 | Admitted-Finance |
| 3 | Not Admitted-Finance | - | - | - | Not Admitted-Finance Others-Document missing GST |
Tender Value
₹33.8 L
EMD Value
₹67,520
Closing Date
24 Aug 2026, 5:00 pmClosed
PEK
Sanat Ghar Bemina
Construction/upgradation of Lavatory Block and white washing of PTQCC Nowshera
2026_SICOP_319156_1
26-PEK of 2026-27 dated 03- 08-2026
Open Tender
Civil Works
Percentage
90 days
Nowshera
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
PEK
₹67,520
17 Sept 2026
3 Aug 2026
25 Aug 2026
3 Aug 2026
24 Aug 2026
3 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Cleaning the surfaces by way of removing dirt, dust, bird dropping, grease, oil, algae, fungue, monkey beats, vegetable growth etc. including washing the surface with clean water with the help of pressure jet machine, windows door etc, by suitable covering so as to avoid any damage to the building/structure, including disposal of the collected waste etc. all as per directions of Engineer-in-charge (Labours) | 20 | No | 650 | ₹13,000 |
| 2 | Providing and applying cement based Putty wall of required thickness over plastered surface to prepare the surface even and smooth complete in specified areas as per specified patter. (2mm thick) | 690.06 | Sqm | 181.05 | ₹1,24,935.36 |
| 3 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding tubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | 61.88 | Kg | 753.75 | ₹46,642.05 |
| 4 | Extra for Providing & fixing of stainless steel navel post (Ornamental) including top ball of 304 grade of required height duly anchored to floor with dash fasteners Complete as per the directions of Engineer incharge | 1 | No | 4,500 | ₹4,500 |
| 5 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing /panelling, C.P. brass / stainless steel screws, including all hardware fittings as required all complete as per architectural drawings & as per the directions of Engineer incharge. (glazing, panelling and dash fasteners to be paid forseparately. (For fixed portion/Doors/windows ) Powder coated aluminum (minimum thickness of powder coated 50 microns including all necessary fittings complete ) | 108 | Kgs | 607.4 | ₹65,599.2 |
| 6 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge(Pre-laminated particle board with decorative lamination on both sides) | 4.01 | Sqm | 933.35 | ₹3,742.73 |
| 7 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) | 6.02 | Sqm | 1,201.8 | ₹7,234.84 |
| 8 | Finishing walls with 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives .New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied @ 0.90 litre/10 sqm. | 517.54 | Sqm | 157.3 | ₹81,409.04 |
| 9 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40mm nominal size, well rammed including all carriages | 61.32 | Sqm | 572.8 | ₹35,124.1 |
| 10 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal ofsurplus excavated earth as directed | 12.11 | Cum | 479.3 | ₹5,804.32 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
BOQ_1055898.xls
BOQ • 0.41 MB
SBD26.pdf
Tender Documents • 0.96 MB
Cor26C.pdf
PDF • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .