REPAIR / REPLACEMENT OF EXTERNAL WATER SUPPLY, DISTRIBUTION LINE, MAINT TO WATER SUPPLY INSTALLATION INCL CONNECTED WORKS AT COD AREA UNDER GE (I) KANPUR.

Amount

Excavation in trenches not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide in any type of soil for laying and taking out of GI/CI pipes all as specified and directed.

Returning filling in including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as directed.

Removing excavated soils to a distance not exceeding 50 m and depositing where directed.

M&L for drilling hole at a depth up to 1.5 mtr below the normal ground level of suitable size to insert upto 150 mm dia pipe across the road in horizontal position complete all as directed.

M&L for cutting of road depth up to 1.5 mtr below the normal ground level of suitable size to lay pipe upto 150 mm dia pipe across the road in horizontal position incl making good all disturbed surfaces of road to match with existing surfaces by premix road material/PCC complete all as directed.

Disconnecting, dismantling and taking up or down old/unserviceable/cracked GI tubing with fittings of size 15 mm bore incl cleaning for refixing complete all as spfd and directed. Note: Excavation and earth work will be measured and paid separately under relevant items.

All as per Srl No 6 above but of size 20mm.

All as per Srl No 6 above but of size 25mm.

All as per Srl No 6 above but of size 40mm.

All as per Srl No 6 above but of size 50mm.

All as per Srl No 6 above but of size 80mm.

Re-laying, jointing and testing old but serviceable GI tubing 15mm dia (obtained from srl item No-6) and connection in new or old portion incl new fittings such as bends, elbows, union, tees, reducers etc as required at site laid in trenches or on floor or wall complete and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and as directed.

All as per Srl No 12 above but of size 20mm (obtained from srl item No-7).

All as per Srl No 12 above but of size 25mm (obtained from srl item No-8).

All as per Srl No 12 above but of size 40mm (obtained from srl item No-9).

All as per Srl No 12 above but of size 50mm (obtained from srl item No-10).

All as per Srl No 12 above but of size 80mm (obtained from srl item No-11).

Supply & Laying, jointing and leakage testing GI tubing medium grade 15mm bore with all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches/floor/walls and making good the disturbed surface to match with existing surface as (PCC work in 1:2:4 using 20 mm graded stone aggregate/ plastering in CM 1:4 and applying finishing coat of existing treatment) complete all as specified and as directed at site. Make: Tata/Jindal/Prakash Surya. Notes :(i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a purticular quarter or a group of blocks. (ii) Excavation & earth work shall be measured & paid seperately.

All as per Srl No 18 above but of size 20mm.

All as per Srl No 18 above but of size 25mm.

All as per Srl No 18 above but of size 40mm.

All as per Srl No 18 above but of size 50mm.

All as per Srl No 18 above but of size 80mm.

Disconnecting, dismantling and taking down CI/GI/DI/Cemented pipe line of size 100mm bore, including all fittings with spigot and socket/ flanged end or any type, lead joint including removing from site complete all as specified and directed.

All as per Srl No 24 above but of size 150mm.

Re-laying, jointing and testing old but serviceable CI/DI pipe line of size 100mm bore after cleaning as taken down under Srl item No 24 here-in-before including all fittings as required at site complete and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and directed.

All as per Srl No 26 above but of size 150mm (obtained from srl item No-25).

M&L in replacement of ductile iron pies 100mm bore incl rubber gasket joints and other relative accessories, class K-7 in any length laid in trenches complete all as specified and directed.

All as per Srl No 28 above but of size 150 mm.

M&L for cleaning of RCC over head reservoir up to 100000 gallons capacity at 40/60 feet staging including removal of all deposited scales, dirt and settled sand particals from intake of circulating pipe, cleaning with brushing, sweeping and brooming of inner and outer wall of the tank and washing the complete with bleaching powder solution and M&L for painting to rising main, delivery pipe, wash out and over flow pipes of 150mm bore existing water mains with two coats of synthetic enamle paints and also re-writing date of cleaning and marking of rising & delivery mains etc. Note : 1. The work shall be carried out through only by trained staff with hygiene and safety equipments 2. Responsibility for insurance and safety of team will solely rest with the contractor. 3. Cost of temporary supports such as props, jacks, scaffolding etc as required at site is deemed to be included in unit rates quoted.

S&F in replacement of cast iron double flanged sluice valve of size 80mm bore class PN 1.0 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed. Make : Kirloskar/Upadhyay/BVI.

All as per Srl No 31 but sluice valve of size 100mm.

All as per Srl No 31 but sluice valve of size 150mm.

S&F in replacement of cast iron double flanged sluice valve of 150mm dia class PN 1.6 confirming to IS 14846/2000 with with high tensile stainless steel spindle with CI wheel, Gun Metal Nuts/rings 'I' bolt, ISI marked including replacement of rubber packing complete all as specified and directed. Make : Kirloskar/Upadhyay/BVI.

M & L for boring on existing CI pipe upto 200 mm dia for branch connections of up to 50mm dia pipe by fixing of MS clamp 50x4mm cut to length and bent to shape, drilled and welded with GI socket of suitable size incl rubber packing, nut, bolt etc and testing complete all as specified and direted.

Repair to GI pipe lines of size 15mm to 25 mm bore dia and repair to leaked joints of pipe line complete including replacement of old GI fitting i.e union,nipple & sockets etc including excvation and taking up & down GI pipe required cutting & threading refixing in position in trenches and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification and including excavation & earth work complate all as specified and as directed.

Repair to GI pipe lines of size 40mm to 80 mm bore bore dia and repair to leaked joints of pipe line complete including replacement of old GI fitting i.e union,nipple & sockets etc including excvation and taking up & down GI pipe required cutting & threading refixing in position in trenches and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification and including excavation & earth work complate all as specified and as directed.

Cutting existing CI/DI water main 150mm bore pipe in position for making branch connection and CI/DI pipeline (Insertion of CI/DI tees bends of different size on connection pieces or for insertion of sluice valve) including excavation & earth work. Note : Fittings such as tees, bends, collars & reducers etc incl in this item and only run lead joints, CI/DI fittings & sluice valve shall be measured and paid separately and making good all disturbed surfaces of wall/ floor/ road/ path to match with existing specification all as specified and as directed.

All as per srl No 38 but of size 100 mm.

All as per srl No 38 but of size 80mm.

M&L for Run lead joints complete with spun yarn of size 80mm dia all as spfd and directed.

All as per srl No 41 but of size 100 mm.

All as per srl No 41 but of size 150 mm.

M&L for Cast iron/ductile iron special fittings for spigot and socketed pipes such as bends (any type, radius and angle) socket tapers any type, (straight, bend, increasing, decreasing or double socket etc) Tee pieces, single branch, Y junction, double branch, cross (all sockets or socket and spigot) collers, caps and plugs for upto 150 mm bore pipes complete all as specified and directed.

S & F stop valve 20mm dia, gun metal iron, screwed down, high pressure with crutch or butterfly handle, screwed for iron pipe or for ferrule ISI marked including dismantling the old U/S existing valve complete.

S & F in replacement of 150 mm bore non return valve both end flanged suitable for cast iron pipe including all fittings washer, nuts & bolt etc complete all as specified and directed.

M & L for opening up of leaking sluice valve 80mm and repacking of stuffing box & replacement of gland packing, nuts, bolts & washers etc complete all as specified of the following sizes :-

All as per item No-47 but of size 100 mm dia.

All as per item No-47 but of size 150 mm dia.

S & F gun metal iron gate valve 25mm dia with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified including dismantling the old unserviceable existing valve complete.

All as per srl item 50 but of size 40 mm bore.

All as per srl item 50 but of size 50 mm bore.

Cutting and removing unwanted grass and wild growth including bushes and shrubs from the roots at water supply installations including removing and even finish the entire area complete all as specified and directed at site by Engineer in charge.

Supply and pouring of Calcium based high strenght granular chlorination chemical having 65 % to 70 % active chlorine, whitish, free flowing, decomposes clear in water solution , free of foriegn matter , the chlorination chemical should contain appropriate quantities of dispersants, corossion inhibitors to prevent incrustation scaling in distribution systems, mercury and other heavy meatl conteminents in chlorination chemical must be Below Detectable Limit (BDL) Make- Sree Rayalaseema (Purichlor) or as approved by HQ E-in-C br NOTE : Calcium based granules must be fortified with corrosion inhibitors & antiscalants (CIAS) & test result for confirming the same must be deposited to Engineer-in-charge.

M & L for construction of valve pit chamber in replacement 600 x 600 x 950 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed.

M & L for construction of valve pit chamber in replacement 950 x 950 x 950 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit remains all as specified and directed.

M&L for replacement of MS angle iron/Channel support for motor/pump incl nut bolt etc incl painting and making good all disturbed surfaces with PCC 1:2:4 complete all as spfd and directed.

M & L for repairing micro processor based water level indicator system in between over head tank sensor to main water level indicator LED display unit showing indication at pump operator room by replacing the circuit board & all other accessories complete all as specified and directed.

Taking / lifting out defective submersible pumps set from bore well complete with column pipe upto 150mm dia steel rope, submersible cable and accessories etc and relowering and commissioning the same after repairing works and testing complete of rating 20 to 30 HP 3 phase.

Dismantling, taking out complete burnt winding wire of submersible motor including cleaning of stator slots replacement of defective parts and rewinding with existing type & gauge of copper winding wire pvc insulated as per motor capacity and using new insulation material such as insulating paper sleeves etc.replacement of submersible cable as required size/ length complete incl testing all as directed of rating 20 to 30 HP 3 phase. Noe : The cost of transportation from pump house/yard to workshop and workshop to pump house/yard shall deemed to be included in item rate quoted by contractor.

Dismantling submersible pump, straightening & polishing of pump shaft, making threading and key way, turning surfacing polishing to impellers, CI bowl complete including replacement of worn out parts as per requirement complete incl testing and all as directed of rating 20 to 30 HP 3 Phase. Noe : The cost of transportation from pump house/yard to workshop and workshop to pump house/yard shall deemed to be included in item rate quoted by contractor.

S & F in replacement of Motor bush of gun metal upper and lower for 20 to 30 HP capacity (Set of two)

S & F in replacement of Rotor bearings sleeve upper and lower for 20 to 30 HP capacity, (set of two.)

S & F in replacement of coupling arrangement with key for motor for 20 to 30 HP capacity

S & F in replacement of Sand guard for submersible pump set for 20 to 30 HP capacity

S & F in replacement of Thrust bearing assembly for submersible pump set motor for the capacity 20 to 30 HP

S & F of Rubber gasket (packing) suitable for 80 to 150 mm dia flange.

S & F in replacement of MS Nut bolts with spring washers of any sizes.

S & F in replacement of Steel wire rope stranded 12 mm dia for hanging of submersible pump set .

S & F in replacement of Electric cable for submersible pump set, flat 10 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed. Make- Finolex/ Paragon/Havells

S & F in replacement of impeller with key and distance bushes for 20 to 30 HP capacity pump

S & F in replacement of Pump shaft of stainless steel suitable for 20 to 30 HP capacity pump

S & F in replacement of NRV for 20 to 30 HP capacity pump

S & F in replacement of Bearing bush for submersible pump for 20 to 30 HP capacity.

S & F in replacement of Bowl assembly for submersible pump set for the capacity 20 to 30 HP

S & F in replacement of Distance sleeves for submersible pump for 20 to 30 HP capacity.

Disconnecting electrically, dismantling, taking out complete burnt winding wire of electric driven motor including cleaning of stator slots replacement of defective parts and rewinding with existing type & gauge of copper winding wire pvc insulated as per motor capacity and using new insulation material such as insulating paper sleeves etc.replacement of wires as required size/ length and refixing and connecting at site complete incl testing on completion all as directed of rating 20 HP phase. Noe : The cost of transportation from pump house/yard to workshop and workshop to pump house/yard shall deemed to be included in item rate quoted by contractor.

Supply only in replacement MS column pipe heavy duty of size 150 mm in standard length of 3.0 mtr, heavy duty duly threaded at ends with provision of MS flange duly drilled and welded incl gasket, nut, bolts and washers, all as specified & directed.

S & F in replacement of epoxy type cable jointing kit complete with all the jointing material, ferrule, for 1100 volts flat submersible copper conductor cable 16/10 Sqmm 3 core Make : M seal/Reychem/Birla 3 M

S & F in replacement of electric cable for submersible pump set, flat 16 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed. Make- Finolex/ Paragon/Havells

S&F in replacement of rubber mat 1x2 mtr 3 mm thick laid down in front of LT panel / bus bar complete ISI marked.

Supply and fixing of CO2 fire extinguishers suitable for electrical fires, non toxic,leving no residue and will not harm machinary & electrical equipment complete with accessories of weight not less than 6 kg complete with suitable stand for ground.

Supply & Fixing of Charts and SOPs in the pump house installation as directed by Engr-in-charge

Minor repair/cleaning/servicing/maintenance and testing of chlorine granuals based dosing plant comprising of dosing pump, agitator and FRP tank and connected pipe lines etc once in a week :- Note : (a) Testing of chlorine at consumer end with medical authority and maintained chlorine test record once a week on a register and submit report to concern JE E&M/Engr-in-Charge. (b) Servicing of Agitator of by using necessary lubricant, replacement of bush/bearing, alingning the shaft , key etc. deemed to be included in item rate. (c) Any other spares required for replacement shall be supplied and fixed under relevent item of Sch 'A'. (d) If any defect found in plant contractor should rectify the defect with in 24 Hrs, if failed to rectify the decfect the contractor shall be liable to pay compensation Rs 500/- (Rupees five hundred only) per plant per day.

S&F in replacement of Motor 220 volt, 50 Hz, voltage input 230 volt single phase 50 Hz, current consumption 0.4 Ampr power 120 watt, speed 4 pole induction non synchronous 920 RPM Approx under lead motor shaft dia 15mm X Length 50 mm motor is flange mounted 4 no of 7 mm dia hole at PCD 150 mm incl all fixing arrangement.

S&F in replacement of shaft complete with impeller made out of MOC poly propelene rigid dia 32 mm X Length 500 mm impeller type two bladed pitched blade turbine numbar of impeller- I incl all fixing arrangements.

S&F in replacement of Dosing tank only capacity 100 Ltrs MOC PE FRP Ltd contaning port hole for pouring chlorination chemical and water them necessary provision for mounting of moteo at proper angel provision for mounting dosing pump on lid level gauge.

S&F in replacement of Rotor assembly with bearing brackets & tolerance ring complete all as specified and directed.

S&F in replacement of Single head feet rate control with shaft complete all as specified and directed.

S&F in replacement of Pump head ( ferrules 1/4"" & duchbill included) complete all as specified and directed.

S&F in replacement of Pump tube complete all as specified and directed.

S&F in replacement of Injection check valve complete all as specified and directed.

S&F in replacement of Weighted suction line strainer 3/8'' complete all as specified and directed.

S&F in replacement of 3/8'' white suction/discharge tubing complete all as specified and directed.

S&F in replacement of Check valve duckbill only (PK-5) complete all as specified and directed.

S&F in replacement of Gear motor complete 230 volt 50 Hz all as specified and directed.

S&F in replacement of Coil 250 volt 50 Hz complete all as specified and directed.

S&F in replacement of Roller Assembly complete all as specified and directed.

S&F in replacement of dosing pump ( Model No 96 NGQ 51) high pressure single head geared motor adustable dosing having output upto 40 US GPD and pressure upto 7 kg/cm2 with connecing accessories complete all as directed by engineer in charge.

M & L for rewinding of agitator motor of capacity 120 watts, 960 RPM single phase 230 V and using copper winding wire of existing gauge with necessary insulation material including testing after repair and refixing of the same complete all as directed.

M & L for repair/maint of monoblock pump set up to 5 HP capacity by means of dismantling from foundation derusting of shaft filling of gland packing replacement of seal bearing etc necessary repair in foundation to make rigid the system and arrest the vibration all as directed.

Dismantling the motor , taking out the burnt copper winding wire of motor up to 5 HP and Rewinding of motor with existing copper wire of existing gauge as per motor capacity using new insulation material such as insulating paper sleeves etc. bakinmg complete with super enamelled insulating varnish including cleaning of stator slots and testing complete, all as directed

Testing of Drinking water at the outlet of service distribution,sampling and anaylisis is to be carried out by NABL accredited authorized LAB per IS - 3025 for essential parameters such as Physical & Chemical analysis : Colour, Odour,Taste,Turbidity,Ph,Total Hardness,Iron , Flouride,TDS and Bacteriological analysis: E-coliform etc Note: Sample of Drinking water is to be collected by contractor in presence of rep of accepting offr and submit result of the test to AGE E/M office as per directed and specified by Engineer-in-charge.

Complete Removal/scrapping of existing surface treatment of Overhead water storage tank of cap 10000 Glns and appx height 28 mtr and applying the following finishes (a) on concrete surface/plaster surface coat of Exterior emulsion weather proof Paint (colour is to be decided by Engr-in-charge) over a coat of primer (make: Asian paints/Berger/as approved by GE). (b) on steel/CI/DI surfaces/ two coat of SE paint (colour is to be decided by Engr-in-charge) over a coat of red oxide complete also writing quotes as per design given by Engr-in-charge (size of letter & matter will be decided by Engr-in-charge) (a) NOTE: The rates are deemed to be inclusive of all type of Spl T&P, scapfoldingupto existing OH tank height.

Dismantling of old/scrapped/broken PCC of any type/in location of COD area and preparation of surfaces for new PCC work complete all as specied and as directed.

M&L for PCC type B-2 (1:2:4) using 20 mm gbraded crushed stone aggregate as in plinth and similar work masss concrerte complete all as specified.

S B ENTERPRISES

DEO Traders

Anandeshwar Enterprises