Repair to roof, flooring, ceiling, joinery, sanitary fitting, plumbing, plastering, sunken floor, Internal water supply and certain other misc B/R works at Arty Mess, Holiday home, KOI and MES IB etc at Aurangabad under GE (S) Ahmednagar

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor .hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and removing the rubbish off the premises. complete all as specified and directed.

Cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate, 75 mm thick as in plinth protection including finishing the surface fair and even laid in alternate bays system, length of each bay n exc 1.5 mtr, including forming 12mm wide and 50 mm deep joint, filled with mastic filling to the full depth comprising mixture of one part heated blown bitumen of 85/25 penetration and two parts sand by (volume) complete all as specified and directed

Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in floors, 40mm thick, laid in panels and finished even & smooth with using extra cement complete all as specified and directed.

Glass dividing strips, 3mm thick and 38mm wide, inserted in position in floors complete all as specified and directed.

Cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in levelling course/ /subbase of floors, 25mm thick, finished even & rough to receive cement mortar bedding complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over and including 15 mm thick screed bed in CM (1:6 ) set and jointed in neat cement slurry and pointed in coloured cement to match tiles complete.

Chequered cement concrete tiles with grey cement and pigments 250 mm x 250 mm x 25 mm thick, laid over and including 15 mm thick screed bed in CM 1:6, set , jointed and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Vitrified ceramic light shade tiles 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed..

Fullbody vitrified dark / light shade tiles 16 mm thick for out door parking (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, as in floors etc laid over and including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement and pointed in white or coloured cement to match the surface complete all as specified and directed.

Glazed ceramic coloured tiles 300 mm x 200 mm x 6 to 7mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster as in backing coat in CM 1:4 complete all as specified and directed.

Glazed ceramic tiles (plain or printed) of each tile of size exceeding 0.11 Sqm but not exceeding 0.18 sqm, 7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster as backing coat in CM 1:4 complete all as specified and directed.

Vitrified light shade tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, on vertical surfaces such as skirting, dado, etc over and including 10 mm thick cement plaster as backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

Machine cut kota stone flooring 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20 mm thick bedding layer CM 1:6 with pigments to match the shade of slab including cutting, rubbing and mirror/ granite finish polishing including removing dust complete all as specified and directed.

All as per ser item no. 16 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site including10 mm thick backing coat of plaster in cm (1:4) complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

All as per item No 19 here in before but except bricks

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

15 mm thick rendering in CM 1:4 on stone masonary surfaces or other than fair faces of brick surface/ concrete surfaces, finished even and fair without using extra cement complete all as specified and directed.

12 mm thick rendering in CM 1:6 on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

10 mm thick plastering in CM 1:4 on fair faces of brick or concrete surface finished even and smooth without using extra cement, as in ceilings, complete all as specified and directed.

Preparing newly plastered or unplastered surfaces of walls and applying two coats of colour wash over & including a coat of white wash complete all as specified and directed.

Preparing newly plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over & including a coat of cement wash (white) complete al as specified and directed.

Preparing newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

All as per item No. 27 here-in-before but three coat of white wash on ceiling surfaces.

Preparing newly plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including chalk whiting complete all as specified and directed.

Providing cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edge including anchorage/bed blocks for hold fasts complete.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm & n.exc 4.00 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

2nd class hardwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed complete all as specified and directed.

Rolled mild steel sections conforming to Fe-290 (Gde E-165) as in door chowkats/frames including cutting to required shape, length, welding etc. including hold fasts etc . complete all as specified and directed.

Second class hardwood 35 mm thick factory made plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Factory made second class hardwood glazed and skeleton door shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

Factory made flush shutters 30 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

Factory made PVC solid single door frame (chowkats) of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening all as specified in SSR part-II 2004 Section-8, clause 8B.3 to 8B.3.2 and shown on drawing in page No 150 of SSR part-II 2004 complete all as specified and diercted.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,( including 4 Nos 100 mm long mild steel powder coated butt hinges for each leaf) complete all as specified and directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars,dovetailed or welded complete all as specified and directed.

Factory made steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay complete without glazing bar with & including fixing flat iron for securing wire mesh complete all as specified and directed.

Mild steel butt hinges 100 mm long medium weight cold rolled, ISI marked fixed complete all as specified and directed.

Stainless steel butt hinges 100 mm long , medium weight cold rolled , ISI marked, fixed to PVC chowkats with screws complete all as specified and directed.

300 mm long rat tail helical door spring including roller and roller plate , fixed in repairs complete all as specified and directed.

Aluminum anodised barrel tower bolt 150 mm long of extruded aluminium section, fixed complete all as specified and directed.

Aluminum handle 125 mm long fabricated type, anodised, fixed complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame, complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame,fixed in repairs, complete all as specified and directed.

Sheet glass 3 mm thick, plain, ordinary quality & glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed.

All as per item No. 51 here-in-before but fixed in repairs i.e after hacking out old broken glass complete all as specfied and directed

Framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Preparation of new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Preparation of new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and directed.

Dismantling aluminium sections of any description complete all as specified and directed.

Anodised aluminium frame for doors , windows , ventilators with aluminium section size minimum 63 mm x 35 mm x 1.5 mm , with one or more rebates including joining cleat for fixing etc complete all as specified. ( Make of section: Jindal / Hindalco)

Anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc and locking arrangement complete all as specified and directed. .

Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed.

Anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no) complete all as specified and directed.

Double action floor spring hydrulicaly regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Mortice lock vertical type 63 mm, brass, four lever fixed in position complete all as specified and directed.

Tinted glass 5 mm thick in glazing to aluminium doors, windows & partitions etc. including pad/gasket as requiredcomplete all as specified and diercted.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 15 mm bore pipe complete all as specified and directed.

Taking up or down GI steel tubing and connections including cleaning for re-fixing or removal of 20 mm bore pipe complete all as specified and directed.

15 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.

Refixing old steel tubing 15 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

20 mm bore galvanised iron tubing medium grade, ISI marked, complete with all fittings and fixed complete, concealed in walls or laid in floors complete all as specified and directed.

Refixing old steel tubing 20 mm bore, with and provision of new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and directed.

Dismantling water tanks exceeding 250 and not exceeding 500 litres capacity and removing to store complete all as specified and directed.

Dismantling water tanks exceeding 500 and not exceeding 1000 litres capacity and removing to store complete all as specified and directed.

500 ltrs capacity rotational mounded polythene water storage tanks (cylindrical vertical covered with lid on top) ISI marked, hoisted and fixed in position complete all as specified and directed.

1000 ltrs capacity rotational mounded polythene water storage tanks (cylindrical vertical covered with lid on top) ISI marked, hoisted and fixed in position complete all as specified and directed.

Ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe (minimum weight 210 gm),fixed in repairs complete all as specified and directed.

Bib taps cast copper alloy with crutch or butterfly handle, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore, fixed in repairs complete all as specified and directed.

Stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.

Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions 20mm bore, fixed in repairs complete all as specified and directed.

PVC Connection 15 mm bore, 450 mm long, with PTMT nuts, fixed in repairs complete all as specified and directed.

Grating round 140 mm size of PTMT (Minimum weight 50 gms) fixed in position complete all as specified and directed.

Swivel shower of PTMT any colour for fixing with 15 mm pipe ( Minimum weight 40 gms), fixed in repairs all as specified and directed.

Shower with arm 15 mm size. 195 mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40 gms), fixed in repairs all as specified and directed.

Water closets, Vitreous China, Orissa Pattern of size 580 x 440 mm, with white integral foot rest including cast iron `P' or `S' trap & connections to flushing pipe, anti syphonage pipe etc, fixed in repairs complete all as specified & directed.

Vitreous china wash down water closet pan (pedestal pattern/anglo pattern) white (excluding fixing bolts, flushing cistern and flush pipe) fixed in repairs complete all as specified and directed.

Easing of aluminium door / window / ventilator by adjusting projecting type hinges by hammering oiling / greasing to hinges, adjusting handle of peg stay,lock,handle , tower bolt in aluminium joinery and making the window shutter fully functional complete all as specified and directed.

Sonw white one piece EWC wall hung 'P' of size 545 mm x 350 mm x 370 mm (Code 2011 Cera Campbell ) with soft close seat cover, inlet and outlet gasket and fixing of Rag bolts (Code 2453A) fixed in the wall as in repairs complete all as specified and as directed. (Makes : Cera Campbell 2011 and Jaguar FLS WHT-0111 or equivalent as approved by GE).

15 mm bore cast copper alloy chromium plated 2 way quarter turn bib cock screwed down for iron pipe, fixed in repairs complete all as specified and as directed. (Makes : Jaguar Clarion code CQT - 23041 or equivalent as approved by GE).

15 mm bore cast copper alloy chromium plated angular stop cock with wall flange (Code ORM 10053) and 450 mm long braided hoses with brass nuts (ALD 805) for connections to the wash hand basin and EWC etc complete all as specified and as directed. (Makes : Jaguar or equivalent as approved by GE).

Snow white counter top wash hand basin of size 550 mm x 425 mm with 40 mm brass waste coupling (ALD 709) including 60 cm long waste pipe 40 mm bore and fixing of WHB in the counter, fixed in repairs complete all as specified and as directed. (Makes : Jaguar FLS WHT-0401/ CERA concord 1032 or equivalent as approved by GE).

15 mm cast copper alloy chromium plated quarter trun pillar cock screwed down for iron pipe and fixed complete as in repairs complete all as specified and as directed.(Makes : Jaguar OPL 15001 or equivalent as approved by GE.)

15 mm brass bore chromium plated wall mixer with telphonic shower arrangement fixed in repairs complete all as specified and as directed. (Makes : Jaguar QQT -7217 or equivalent as approved by GE.

Brass chromium plated 95 mm dia hand shower (HSH-1737) with 1.50 m long flexible tube (SHA-549D12) and premium wall bracket for hand shower (SHA-555) fixed in repairs complete all as specified and as directed. Makes : Jaguar or equivalent as approved by GE.

Vitreous china soap dish fixed on the wall with screws and gutties complete all as specified and as directed. (Makes : Jaguar AQN-7731 or equivalent as approved by GE.

Toilet roll holder fixed on wall with screws and gutties as in repairs complete all as specified and as directed (Makes : Jaguar AQN-7751 or equivalent as approved by GE.

Vitreous china sensor operated urinals of size 61 cm X 39 cm X 38 cm (including all necessary fitiings for making the urinal functional in all respects) fixed in posion complete all as specified and directed. Make : Hindware/ Cera / Jaquar as approved by GE

12 mm thick glass for partition wall of size exc. 0.50 Sqm but n.exc 1.5 Sqm and fixed complete all as specified and directed.

PVC waste pipe 32 mm bore of standard length suitable for kitchen sink, fixed in repairs complete all as directed.

Brass CP jet for water closet (pedestal pattern), fixed in repairs complete all as specified and directed.

PVC waste pipe 40 mm bore of standard length suitable for kitchen sink, fixed in repairs complete all as directed.

PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, fixed in repairs complete all as specified and directed.

Vitreous China wash hand basin White of 580 x 450 mm size flat back including cutting for and pinning in ends of brackets, including waste coupling CP and waste / vent pipe and brackets but excluding taps, fixed in repairs complete all as specified & directed.

Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and diercted.

Brass CP mixture with round spout without popup waste system 450 mm long copper pipes & brass nuts, fancy type for iron pipe and fixed complete all as specified and directed. .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and diercted.

Precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete (reinforcement to be measured separately) complete all as specified and diercted.

Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and diercted.

Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and diercted.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and diercted.

Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary fixing/ repair /replacement of existing electrical fittings at site complete all as specified and diercted.

Hangers made out of 6 mm dia GI wire (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expension hold fasteners 12.5 mm dia. 40 mm long complete all as specified and directed.

Exposed metal ceiling with 12 mm gypsum board Ist quality fixing in 600 mm x 600 mm grid (frame work for ceiling shall be measured and paid separately) complete all as specified and diercted. Make:-Saint gobin/Armstrong

Viterous China urinals, half stall urinal (back to corner wall type), complete including providing and fixing plus, bedding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed in repairs complete all as specified and diercted.

Taking down rain water pipes (any size or pattern) including all fittings complete all as specified and diercted.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

PVC (SWR) bends any radius with access door of 110 mm bore,fixed complete all as specified and directed.

4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to mild steel framework with screws, fixed in repairs, complete all as specified and directed.

Preparation of new surfaces of plain AC sheet ceiling boards and applying three coats of white wash complete all as specified and directed.

Dismantling of AC sheet (corrugated, semicorrugated etc) as in roof covering including ridges complete all as specified and directed.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, colour and design as approved by GE complete all as specified and directed.

6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

6 mm thick asbestos cement two piece serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.

Repairs to existing steel window 'Z' section of area n exc1.50 sqm each including replacement of projecting type hinges , steel handle, and peg stays including welding or riveted as required complete all as specified and directed.

40 mm thickness of Insulated PVC wall lining consisting of PVC Insulated panels having expanded polystyrene (EPS) stuck to 2 mm thick wooden grain printed PVC sheet duly fitted into the wall as per specifications and drawing complete all as specified and direted.

Precast cement concrete louvres and jallies, 25 mm thick with PCC 1:2:4, type B0 using 12.5 mm graded aggregate (measured solid), including all mouldings but excluding frame complete set in CM 1:4 all as specified and diercted.

Providing precast cement concrete 1:2:4 type B-1 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, plastes, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortat complete with joints to match complete all as specified and directed.

Brass, chromium plated, hand faucet, 15 mm bore of pipe including flexible connection pipe, fixed in repairs complete all as specified and directed. Make : ESS-ESS, Marc, Kingston,plumber

PVC EWC sheet cover white/coloured complete with hinges bolts etc. fixed in repairs complete all as specified and directed.

MS. A.S. CONSTRUCTION

M/s S.R lahoti

M/s.M G Kulkarni

D V Engineers and Contractors Pvt Ltd

M/S. M.A. Sharief engineers and contractors