SPL REPAIR TO BLDG NO CH-10 PERS CH, BLDG NO-TE-291, LP-308 (SINGLE PERS LIVING ACCN) AND MRS BLOCK OF AGE B/R AND AGE E/M UNDER GE TENGA.

Amount

Demolition floor, hearth or tiling including cement mortar bedding (but not backing)), removing serviceable tiles to store and rubbish off the premises all as specified.

M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and as directed.

M&L for light shade vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tile not exceeding .36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive tiles .

M & L for 300 x 200 x 7 mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

Demolition of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc.

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in cooking platforms in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite all as specified.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Fixing only 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Supply and Fix 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 275 gsm complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling wrought iron or mild steel work of any description.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Gde-Fe 410-W (Gde E- 250) quality A.complete as specified.

Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar.

M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and using PCC type C-1, 1:3:6 (20mm graded agg) and setting in cement mortar 1:6 complete.

M&L for precast cement concrete solid building blocks (1:3:6), type C-1, 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:4), complete, laying inner side of wall.

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement.

Material and labour for rendering 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces mixed with water proofing compound @20 ml/50 Kg of cement ,finished fair and even without using extra cement complete all as specified and directed. Note:WPC shall be measured and paid for separately.

Supply only Iiquid water proofing compound ISI marked .

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer & 1 mm thick POP putty to prpare surface even and smooth complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening primer.

Material and labour for preparation of old distempered surface of walls including washing down and stopping of distempered surfaces and applying one coat of distempered oil emulsion all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coat of cement base paint over one coat of primer complete all as specified.

Material and labour Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of alkali resistance primer.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.

M & L for 50 mm thick II nd class local Hard wood clean sawn boarding with butt joints fixed with nails in any situation.

Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets.

S&F for anodised aluminium snap grid of size 605X605X mm frame work for false ceiling with aluminium anodized section size, wall angle 40mm X25mmX2mm thk, main/cross tee-section 36.5 X 25 X 1.4mm and 23.5mm X 26.4mm 1.4mm and susupended with 4mm dia GI wire respectively with and including 8mm thk laminated Gypssum board fixed to aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer's instructions complete all as specified and as directed by Engineer -in-charge. Make: (i) Aluminium section : Valco,HINDALCO, JINDAL (iI) Gypsum Board: GYPSUM IND LTD,SAINT GOBLIN.

S&F 6 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on wall surfaces completed all as specified and directed by Engr-in-Charge.

S&F 4 mm thick ply wood, grade BWR, type BB, fixed with nails to timber frame work on ceiling surfaces completed all as specified and directed by Engr-in-Charge.

M & L for 2 nd class Hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 but n.exc 6 sq.cm.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete.

S & F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer 30mm thick.

S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.

S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing.

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed.

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed.

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised.

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised.

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece.

S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.

S&F PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed.

M&L for 75 mm thick plain cement concrete type C-2, 1:3:6, (40mm graded stone aggregate) as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Gde-Fe 410-W (Gde E- 250) quality A.complete as specified.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets n exc 4 kg/sqm,complete as specified.

M & L Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples, wt n exc 4 kg/sqm supplied and fixed complete to wood or steel members.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding .11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.

Material and labour for 5mm thick rendering in cement mortar (1:3) on brick or concrete surfaces of ceiling finshed even and smooth without using extra cement.

Preparing old plastered surfaces of ceiling and applying one coat of white wash.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash.

M&L for preparation of new plastered surfaces of roof surfaces and applying waterproofing treatment over smooth finished surfaces after application of cold applied bituminous primer @ 0.30 kg/Sqm and laying APP polymer, modified, non-woven polyester mat, reinforced membrane, 3.00mm thick , weighing 3.5 Kg /Sqm with surface finish by torch application method, with minimum 75 mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying with one coat of bituminous based solar reflective aluminium paint @ 100 gms/ Sqm complete all as specified and directed.”

Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.

S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified.

S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore.

S&F PVC (SWR) bends any radius, 110mm bore withaccess door.

S&F PVC (SWR) bends any radius, 75 mm bore withaccess door.

S&F PVC (SWR) junction single, (single T) equal or unequal with access door 75mm bore.

S&F PVC (SWR) vent cowl 110 mm bore.

S&F PVC (SWR) couplers 110mm bore.

S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified.

Taking up or down 15 mm bore steel water tubing and connections including clfor refixing or removal to store.

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store.

S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm.

S & F in repair vitreous china wash down water closet pan (Squatt pattern) white incl PVC (SWR) 110mm 'P’ trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe) complete all as specified.

S&F 10litres PVC,Syphonic action type, Flushing cistern low level ,white with inlet ball valve float chain and pull and brackets complete.

S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe.

S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S& F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union.

S&F 15mm stop valves alloy,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe but fancy type, chromium plated.

Supply and fix in rep 15mm Pillar taps , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

M & L for dismentling of unserviseable existing rolling shutter for make the surface completely free of millscale, dirt, dust grease and other foreign materials by scrubbing with steel brush applying grease at bearing, locks safety levers, make it able to easily open and close, refixing at same position complete all as specified and directed.

Demolition of cement concrete (reinforced) in any description not exc 15 cm thickness (below or above ground level).

M&L for pre cast re-inforced cement concrete 1:2:4 type B-1 as in cover slab for man hole and similar article with plain face set in Set in CM 1:4 complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffits of foundation and plinth beam and similar wk vertical or to batter complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any description not exc 15 cm thickness (below or above ground level).

M&L for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in floor finishing cement concrete surface even and smooth using extra cement.

M & L for 150 mm spread thickness soiling(or sub base ) with broken boulders or quarried stone, surface formed and rolled and consolidated to required gradient and camber completed all as specified and directed.

M & L for Cement concrete type D- 2,1:4:8 (40mm graded aggregate) complete all as specified and directed.

M & L for 40 mm thick Cement concrete type B- 1, 1:2:4 (20mm graded aggregate).

M & L Providing and laying 80mm thick factorymade chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method usingPU mould, laid in required colour & pattern over and including 50mm thick compactedbed of fine sand, compacting and proper embedding/ laying of inter locking paverblocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size. and pattern, finishing and sweeping extra sand complete all as specified .

M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (20mm graded aggregate) .

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A'.

M&L PCC 1:3:6 type C2, (using 40mm graded stone aggregate) as in surface channels and drains.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm grade stone aggregate as in coping & Drain complete all as specified and directed.

M & L Sand filling under floors or in cable duct including watering and consolidation.

Dismantling fencing wire mesh, any type.complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc, including provision of binding wire.

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 115 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size.

All as per item No. 115 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.

M&L for Point wiring for one socket outlet 15 Amp on independent board with 2.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 2.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.

S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min).

Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.

S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 90 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,all as specified and directed.

S & F in replacement of GI brackets for fixing LED building security light fitting fabricated out of GI tubing 32 mm dia, light grade, 0.9 mtr long , bend to 120 degree shape by cutting, welding and well finishing including MS clamp of flat iron of size 30 x 4 mm -02 Nos complete for fixing on wall including all fixing arrangements such as fastners, bilts, nuts, bolts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge.

Supply and fixing LED flood light 210 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers inl. nut, bolt / clamping complete all as specified and directed.

Supply and fix in replacement exhaust fan, steel body AC single Phase. 230V50 Hz, RPM 1200, Copper winding of size 300m sweep with, blades, and frame and louvers complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m inl. nut, bolt / clamping complete all as specified.

Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inlet outlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etc including making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge.

S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge.

Supply and fixing, metal clad socket out let with MCB single pole 20 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified.

S&F DB double door TPN 4 way sheet phospetised powder painted with 200 Amps rated bus bar 415 Volts neutral link, IP 43 protection double door type fixed on wall duly grouted in solid block or wooden board complete all as specified and as directed.

Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 12 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F MCCB 4P having braking capacity 16KA, 100 Amps, 415 V, AC, 50 Hz complete all as specified and directed.

S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.

S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed FRLSH cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.)

Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core size complete all as specifed and directed.

Supply and fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 core size complete all as specifed and directed.

Supply and laying Double wall corrugated HDPE duct pipe 80mm outer dia confirming to IS: 14930 (Part-II) of approved colour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Engineer-in-charge.

Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc).

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.

Taking down sub main wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.

S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbers clamps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.

S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 4 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipe along with 4 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. Note: One RM PVC casing capping/PVC conduit ,one run of 4 sqmm earth wire and 2 Run of 4 sqmm cable shall be measured as one run.

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections complete all as specified and directed.

M/S R P M CONSTRUCTION (BID ID -3418216)

D.P. Traders (BID ID -3418671)

M/S DKT CONSTRUCTION (BID ID -3419005)

M/S ASHOK CONSTRUCTION (BID ID -3418682)

M/S R.N ENTERPRISE (BID ID -3419087)

MS SANGRILA SYNDICATE (BID ID -3419974)

M/S SARAI SUPPLY SYNDICATE (BID ID -3420194)