Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹34.1 L+₹5.8 L (20.6%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹34.5 L+₹6.3 L (22.2%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹34.8 L+₹6.5 L (23.0%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹39.7 L+₹11.4 L (40.5%)Rejected-Finance AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
11 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
REPAIRS TO WATER SUPPLY E/M INSTALLATIONS AND CONNECTED WORKS UNDER AGE B/R-II OF GE (CENTRAL) KIRKEE.
2022_MES_569499_1
8721/E8 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
BEG AND CENTRE area
Class D Category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹94,000
Yes
1 Feb 2023
16 Dec 2022
13 Jan 2023
16 Dec 2022
11 Jan 2023
30 Dec 2022
16 Dec 2022 - 29 Dec 2022
Amount
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.
Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets as in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
As per Sl Item No. 2 above but except AC sheet. NOTE :- AC sheets as obtained from Sl Item No. 1 shall be reused.
Material and labour for Asbestos cement two- piece adjustable plain wing ridge, 6mm thick fixed with L-type or J- type or cranked hook bolts complete all as specified and as directed.
Dismantling of plain or corrugated / galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.
Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position complete all as specified and as directed.
Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, including providing end crimp at required location at eaves level, shape of crimp match to sheet profile complete all as specified and as directed. NOTE :- The quoted rate shall include provision of end flashing/crimp and no extra payment with regard to this provision will be made to the contractor.
Supply and fix pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Supply and fix 0.63 mm plain galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 gsm. fixed with self tapping /coach screws complete all as specified and as directed.
Supply and fix rolled mild steel sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 W(Gde E-250) quality B complete all as specified and as directed.
Supply and fix rolled mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes conforming to IS 1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed.
Material and labour preparation of new steel surfaces of any desciption over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
Dismantling of wall and ceiling boards (fibre, pulp insulation, Ac etc), any thickness including cover fillets complete all as specified and as directed.
Supply and fix interlocking anodised aluminium snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and adjusters and screws etc,.complete all as specified and as directed.
Material and labour for 8-9 mm thick gypsum board/tiles for insulation and accoustic purposes, 600 x 600mm in size, fixed with nails to timber frame work or with staples on snap grid in ceiling complete all as specified and as directed.
Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and complete all as specified and as directed.
Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
Material and labour for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match shade of slab including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
All as per Sl Item No. 18 above but on steps, risers as in skirting over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.
Rounding to edges of stone slabs of one edge as in steps, cooking platform and other similar situations complete all as specified and as directed.
Taking down chowkats or frames with shutters without taking of shutters from the frames area exc. 1.5 sqm but not exc. 4 sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters without taking of shutters from the frames area not exc. 1.5 sqm each complete all as specified and as directed.
Taking down shutters area exc. 1.00 sqm but n.exc. 2.00 sqm each and removing from site complete all as specified and as directed.
Supply and fix powder coated aluminium sliding windows having three Nos of tracks including one wire guaged shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperture 1.4 mm and two Nos of glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete all as specified and as directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing shown on Page No. 160 of SSR 2010 part II complete all as specified and as directed.
Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of MS tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. MS frame shall have a coat of steel primer, the inner panel shall consist of 25mm thick EPS of density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the moulded design on one side and 2mm plain and /or prelam PVC sheet on other side of the EPS, the edge of panel to be sealed with lipping of 15mm wide PVC sheet batten ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along MS tube for hardware provision and for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification and drawing and complete all as specified and as directed.
Supply and fix factory made shutters 35mm thick, plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
Supply and fix 35mm thick 2nd class hard wood glazed or skeleton shutter open rebated divided into square with plain chamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1 complete all as specified and as directed.
Supply and fix 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Supply and fix factory made UPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket, 1.2+0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners and including all fitting complete all as specified and as directed.
Supply and fix for plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
Material and labour for two coats of synthetic enamel paint of approved tint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cm width or girth complete all as specified and as directed.
Supply and fix 100 mm but hinges, medium weight, stainless steel complete all as specified and as directed.
Supply and fix aluminium handles, 150 mm size, cast type, anodised complete all as specified and as directed.
Supply and fix for aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed.
Supply and fix for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed.
Supply and fix rolled mild steel as in flat iron 25x3mm thick conforming to Fe-290, Gde E-165 as in hold fasts complete all as specified and as directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store, rubbish off the premises complete all as specified and as directed.
Material and labour for vitrified ceramic tiles 9-10 mm thick light shaded, digital pattern (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for vitrified coloured light shaded tiles as in dado / skirting surfaces 9-10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement plaster (1:4) as in backing coat complete all as specified and as directed. MAKE :- SOMANY(GRANDE VEGAS GOLD FP, DURAGRES SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for non skid ceramic coloured tiles 7-8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but n.exc. 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed. MAKE :- SOMANY(DONJON DECOR VC , CERAMIC VC SHEILD SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for glazed ceramic coloured tiles as in vertical surfaces 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed. MAKE:- SOMANY(ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK
Material and labour for 25 mm thick plain cement concrete, type B1,(1:2:4), using 20 mm graded stone aggregate as in levelling course for receiving floor tiles complete all as specified and as directed.
Taking down steel tubing and connections 15mm bore complete all as specified and as directed.
Taking down steel tubing and connections but 20mm bore complete all as specified and as directed.
Taking down steel tubing and connections 25mm bore complete all as specified and as directed.
Supply and fix galvanised steel tubing, 15mm bore, medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.
Fixing only galvanised steel tubing 15mm bore, any grade, to walls and ceilings or laying in floors etc complete all as specified and as directed.
Supply and fix galvanised steel tubing, 20mm bore, medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.
Fixing only galvanised steel tubing 20mm bore, any grade, to walls and ceilings or laying in floors etc complete all as specified and as directed.
Supply and fix galvanised steel tubing, 25mm bore, medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.
Cutting chases, pinning and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth in stone/ concrete block walls complete all as specified and as directed.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level complete all as specified and as directed.
Material and labour 40mm thick plain cement concrete, type B1, (1:2:4) using 20 mm graded stone aggregate as in floors finished fair, even and smooth without using extra cement complete all as specified and as directed.
Material and labour 75mm thick plain cement concrete, type C2, (1:3:6), using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed.
Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed.
Material and labour for pre cast cement concrete block masonry using type C1 (1:3:6) with 20 mm graded stone aggregate with solid blocks, exc. 10 cm in width and setting in mortar (1:6) complete all as specified and as directed.
Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.
Material and labour for rendering 15 mm thick on fair faces of brick/ PCC block masonry wall using cement plaster (1:4) and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.
Material and labour preparation of newly plastered surfaces and applying two coats of cement based paint of approved tint over a coat of primer on wall surfaces of any description complete all as specified and as directed.
Material and labour for rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall in cement plaster (1:6) and finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour preparation of newly plastered surface and applying two coats of oil bound distemper over a coat of primer on walls etc complete all as specified and as directed.
Supply and fix for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed.
Supply and fix in repairs brass chromium plated health faucet 15mm dia suitable for EWC complete all as specified and as directed.
Supply and fix in repairs soap dish brass chromium plated fixed complete all as specified and as directed.
Supply and fix in repairs brass chromium plated towel ring complete all as specified and as directed.
Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 7306 Tranquil series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange all as per Prayag Cat No 7308 Tranquil series series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings all as per Prayag Cat No 7326 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union CERA Cat No F7020307 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix Gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and as directed.
Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No CURTIS or techno commercially equivalent makes specified in PS fixed as in repairs, complete all as specified and as directed.
Supply and fix Plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom, and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs complete all as specified and as directed.
Supply and fix PVC valveless, syphonic action type, flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Material and labour for vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.
Supply and fix PVC connections 15 mm size with PTMT nut of length 450 mm fixed in repairs complete all as specified and as directed.
Supply and fix 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per Prayag Cat No 9302 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.
Supply and fix galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading complete all as specified and as directed.
Supply and fix in repairs brass chromium plated Jet spray 15 mm dia including fixing to steel pipe complete all as specified and as directed.
Supply and fix in repair PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed.
Material and labour for epoxy flooring work, 3 mm thick, self leveling epoxy flooring of specified colour shade including surface preparation complete all as specified and as directed.
Material and labour for complete removal of existing treatment and preparation of old plasterd surfaces of wall and applying two coats waterproofing exterior emulsion paint over a base coat of primer as per manufacturers instructions complete all as specified and as directed. . MAKE :- Apex Ultima Protek of Asianpaints or equivalant. NOTE :- (i) Filling of cracks,holes and dents are deemed to be included in the quoted rates. (ii) The emulsion paint includes 10 years durability warranty and 6 years waterproofing warranty.
Material and labour for preparing old plastered or unplastered wall surfaces of any description including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts, trading oil, greasy spots and applying one coat of white wash on walls complete all as specified and as directed.
Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Demolition/ Dismantling of precast interlocking tiles/ paver blocks, chequered tiles of any description thickness and size complete all as specified and as directed.
Material and labour for 50 mm thick sand filling under floors or foundations including watering and consolidation complete all as specified and as directed.
Material and labour for 75 mm thick plain cement concrete (1:4:8) type D2 as in sub base complete all as specified and as directed.
Material and labour for providing 60 mm thick machine pressed precast cement concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006, with grey cement and pigment,rubber moulded tiles M-35 Grade,as in floors, paving, path etc. complete laid over 15 mm thick cement mortar (1:6) screed bed layer complete all as specified and as directed.
Material and labour chequered cement concrete tiles rubber moulded 300 x 300 x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM (1:6) complete all as specified and as directed.
Material and labour for providing plain cement concrete, (1:2:4), type B1 using 20 mm graded stone aggregate as in coping for interlocking tiles drains / block for hold fasts including use of form work complete all as specified and as directed.
Supply and fix in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. NOTE :- Each line wire to be measured.
Restraining and resecuring including making good staples etc., galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. NOTE :- Each line wire to be measured.
Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and as directed
Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Gde Fe410-0 quality "A" complete all as specified and as directed.
Removing of old water proofing treatment and cleaning the top surface of slab removing dust, foreign material,and removing rubbish off the site to a distance n.exc. 100m complete all as specified and as directed.
Material and labour for 10 mm thick rendering in cement mortar (1:3 on RCC roof slabs including mixing with water proofing compound @ 3% by weight of cement finishing even and fair to receive water proofing APP membrane complete all as specified and as directed. Note : WPC shall be measured and paid separately.
Material and labour for water proofing treatment on top of RCC slab / chajjas as follows:- (a) applying oil based bituminous primer @0.25 Kg/sqm of surface. (b) Laying 3mm thik APP modified water proofing polymeric membrane by torching method with 100 mm side and end lap having weight not less than 3.50 kg/ sqm, reinforced with non-woven polyster reinforced matt weighing not less than 160 gms/sqm, polyster core having soften point not less than 1500 degrees C, longitudinal tensile strength not less than 650 N/Sqm. (c) Applying a coat of solar reflective aluminium paint @ 0.15 Kg/Sqm on membrane surface including 24 hrs ponding test complete all as specified and as directed.
Taking down old rolling shutters and refixing the rolling shutter on same position, including having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 levers, 3 nos of ball bearing and MS handles including all necessary greasing and easing, replacement of unserviceable parts including one coat of synthetic enamel paint over a coat of primer complete all as specified and as directed. NOTE :- Parts replaced shall be measured and paid seperately.
(a) Supply only MS steel sheet 1.0mm thick complete all as specified and as directed.
(b) Supply only spring suitable for rolling shutter complete all as specified and as directed.
(c) Supply only MS safety lever locks with 4 levers for rolling shutter complete all as specified and as directed.
(d) Supply only ball bearing for rolling shutters complete all as specified and as directed.
(e) Supply only MS handles 150mm in size for rolling shutter complete all as specified and as directed.
Demolition of RCC of any discription in any position not otherwise described including cutting reinforcement as required and removing the debries out of MD land complete all as specified and as directed.
Material and labour for Reinforced cement concrete (1: 11/2:3) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed.
Material and labour for TMT steel bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed, not less than 0.9mm dia complete all as specified and as directed.
Material and labour for steel form work with fair finished flat surfaces ton slab, columns, sides of concrete foundations, footings, bases of columns, raft and similar work vertical or to batter complete all as specified and as directed.
Material and labour for 100mm thick plain cement concrete (1:2:4), type B2 using 40 mm graded granite stone aggregate as in flooring even and smooth surface without using extra cement complete all as specified and as directed.
Material and labour for hard core of gauge not exceeding 63 mm of broken granite stone deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in sub station complete all as specified and as directed.
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and as directed.
Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc. 0.5 sq.mm in each pane complete all as specified and as directed.
JP ENTERPRISES
SAMBHAJI D JARANDE
DARSHAN ENTERPRISES
MAHESH DADAJI BACHHAV
M/S JAYCONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .