Development with Tourist infrastructures at Pykara of Nilgiris District

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness etc.,complete as per standard specification

Dismantling of Existing Buildings Dismantling, clearing away and carefully stacking the useful materials for re-use / auction and disposal of non usable materials complying with standard specification and as directed by the departmental officers

Dismantling of Brick / Stone Masonry in cement mortar walls under 3m high and disposal of dismantlied material up to a lead of 5 Km

Dismantling corrgated iron sheet roofing with pan tiles over without roof timbers and stacking at site as per direction of office in-charge for rework / auction

Doors and Windows including removal of frames, hinges and fastenings and stacking at site as per direction of office in-charge for rework / auction

Dismantling Reinforced Cement Concrete by using deploying machineries and disposal of dismantlied material up to a lead of 5 Km

Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs and disposal of dismantlied material up to a lead of 5 Km

Dismantling Guard Rails (Dismantling guard rails by manual means and disposal of dismantled material with all lifts and up to a lead of 1000 metres, stacking serviceable materials and unserviceable materials separately.)

Dismantling of bituminous layer (BC, DBM, BM, SDBC) using deploying machineries and disposal of dismantled material up to a lead of 5 Km

Dismantling of non bituminous layer (WMM & GSB) using deploying machineries and disposal of dismantled material up to a lead of 5 Km

Cutting of Trees, including Cutting of Trunks, Branches and Removal (Removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 metres and earth filling in the depression/pit.)

Girth from 300 mm to 600 mm

Girth from 600 mm to 900 mm

Girth from 900 mm to 1800 mm

Girth above 1800 mm

Earth work excavation for foundation in SDR - (Not Requiring Blasting) Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Soft disintegrated rock, laterite, soft rock or kankar, not requiring blasting. and as directed by the departmental officers.

Supplying & filling in foundation & basement with M-sand filling in layers not more than 15cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Providing pest control with anti-termite treatement drilling holes at junction of walls with floors at 300mm intervals and injucting chemical emulsion on those with cement etc. making holes along the vertical surface out side the walls at 150mm intervals to the depth of 450mm pointing chemical emulsion into the holes and closing holes with chemical etc. spraying all surface of treatment is to be done as per IS code no:5313/ Part III 1981 with approved chemical.(The chemical is to be used on the work should be got approved by the Executive Engineer before use on work) etc complete complying with standard specification and as directed by the departmental officers

Damp proof course with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used, finishing and curing etc. complete complying with standard specification.

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:1.5:3 (PCC M20) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers - Mixing by mechanical means

Brick work in Cement Mortar 1:5 using best quality Aerocon Block of size 600mmx200mmx150mm for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done etc. complete complying with standard specification

Foundation and Basement

For Ground floor

Plastering with Cement Mortar 1:4 (One cement and Four Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

R.R Masonary in cement mortar1:5(one cement,and five crushed stone sand) for foundation and basement including simultaneously pointing above ground level with the same mortar directed by the departmental engineers etc., complete complying with standard specification.

Bored cast-in-situ M25 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. etc.,complete as per standard specification

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Foundation and Basement

For Ground floor

For First floor

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. a)Foundation and Basement

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specification and as directed by the departmental officers.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with standard specification and as directed by the departmental officers.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

For plane surfaces such as RCC floor slab. Roof slab, beams, linte, bed blocks. Landing slab, waist slab , portic sabs and beams etc

Supplying, fabricating and placing in position TMT Steel for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification and as directed by the departmental officers. etc.,complete as per standard specification

Structural Steel for Column, Beams, Gable Roof Rafter, Common Rafter & Purlin Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design and complying with standard specification and as directed by the departmental officers.

Providing and fixing 10 mm thick solid Polycarbonate sheet using nessesary MS support structure from the ground (Considered separatly under structural Steel). as per given technical specifications. The sheet will be mounted on hot dip galvanized steel frame work with the help of specially designed aluminum pressure pad profile and zinc coated pinhead self-drilling screw with rubber gasket for proper griping & to prevent noise leakage: • Thickness: 10 mm, solid • Both side UV coated • Weighted Sound Reduction Index Rw=34 dB • Light Transmittance: 92% for clear • Tensile Strength: 60 N/m2 • Modulus of Elasticity: 2000 N/mm2 • Mechanical and Structural performance as per EN 1794 including galvanized steel work and rubber profile all around. • Stone Impact Resistance: As per EN 1794-1 Annex.C • Yellowing index shall be less than 10 as per ASTM D 1925 or equivalent • Fire Retardant Annex A Class 2, as per EN 1794-2; Flame Spread Class 1 as per BS 476 part 7 etc.,complete as per standard specification

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc.,complete as per standard specification

Supply and fixing of Pre-fabricated Structural Steel DECKING SHEET having minimum 345 Mpa yield Strength, colour coated Galvanised Structural Steel DECKING SHEET Zinc coating as per IS:277 of equivalent Standard. The structural decking panel shall have 955/m² effective width (Overall Width of 931mm), nominal crest height 50 mm deeper shall have 2301mm centre to centre pitch with the thickness of 1.25 mm BMT for fixing us side of ribs for required length as per Concrete thickness at embossment (share grove) on top & side of ribs for better composite action and shall have the site (165mm Avg) with self drilled screws and EPDM wafers etc.,complete as per standard specification

Paving the floor with best quality vitrified Tiles of 800 x 800 x 10mm size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers.

Dadooing walls with following best approved quality, white / colour glazed tiles of size 300mm x 200mm x 6mm conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.

Supply and Installation of Country Wood for making the following items using Atthi Wood. Temple God and Goddess Vahanams of required shape and size with ornamental features. etc.,complete as per standard specification

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

G.I Barbed wire Fencing 1.2 metre high (Providing and fixing 1.2 metres high GI barbed wire fencing with 1.45 m angle iron posts 50 mm x 50 mm x 6 mm placed every 2.5 metres center to center over proposed compound wall, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc.,complete as per standard specification

Providing And Fixing of Retro Reflectorised Cautionary, Mandatory And Informatory Signs (Without Definition Board) Made Out of High Intensity Prismatic Grade Sheeting To Type – Iv Standards of Irc 67 . 2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported on a Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level to The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67- 2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45mmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67X2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And a Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67-2012 etc.,complete as per standard specification Sign board having more than 0.9 Sqm

Supplying,Garden soil filling , filling, and spreading a mixture of Red Earth, Farm Manure, and Sand of 900mm depth at a ratio of 1:1:1. This mixture is to be prepared by mixing and spreading evenly in the arrival plaza area

Planting of Floral shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Supplying and fixing of precast RCC wall panel compound wall including Providing and fixing of Precast column, Precast Panel for 2.2 m height above parking level with proper installation and Painting as per approved design

Providing and fixing of MS Portable Food Kiosks Providing and fixing of MS Portable Food Kiosks using MS Steel frames, Cargurated sheets on a prepared platform, with provisions for doors and windows utilizing MS Steel frames and tinted glass as per the approved drawing.

Providing and fixing of Stainless Steel Flap Barrier Providing and fixing of Stainless Steel Flap Barrier on a prepared platform, with provisions of two way access

Supply and Installation of fully automatic organic waste converter machine in prepared platform inclding Transportation, Installation & Training

Providing & Placing of Litter bins with stand etc., complete as directed

Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. etc., complete as directed

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers.

Construction of Bio Septic Tank including excavation of pit and placing of Bio Tank and connection the inlet from Toilet and outlet to sewage water line

Development of artificial Gardening using natural stones, natural attraction equipment's and other seasonal artifices

Supply of 8 Seater Electric Sightseeing Car

Supply of EV vehicles charging units for 8 seater Electric Sightseeing Car

Providing and installing of EV Charging Station

Platform & Shelter

Charging Unit

Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)

Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement etc.,complete as per standard specification

Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement etc.,complete as per standard specification

Providing and Laying Granular sub base (GSB) by provided coarse graded material confirming to ( table 400-1) material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density,etc.,complete as per standard specification

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.,complete as per standard specification

Providing and laying 83mm thick Interlocking paverblocks of M -40 grade of approved size, design & shape, laid in required colour and pattern over a base layer of 80mm thick of 6mm size graded chips filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (For Bus Parking Slot & other location as per Typical Cross Section Drawings)etc.,complete as per standard specification

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

Providing and laying Prime Coat over WBM/ WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 502 of MORTH Rev-5 such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc.,complete as per standard specification

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H specification clause No. 505 complete in all respects etc.,complete as per standard specification

Providing and laying Tack Coat over Existing BT surface using 2 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., etc.,complete as per standard specification

Providing and laying Bituminous Concrete to 30/40mm thick using 0.13 cu.m of 19.00- 9.50mm, 0.17 cu.m of 9.50-2.36mm and 0.26 cu.m of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied Thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35- 2015. The finished surface to be level, uniform and free from streaks and holes etc.,complete as per standard specification

Providing And Fixing of Retro Reflectorised Cautionary, Mandatory And Informatory Signs (Without Definition Board) Made Out of High Intensity Prismatic Grade Sheeting To Type – Iv Standards of Irc 67 . 2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported on a Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level to The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67- 2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45mmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67X2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And a Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67-2012 etc.,complete as per standard specification

Speed Limit

Left / Right Curve

No Parking

Information Boards (Size more than 0.90 Sqm)

Manufacture, Supply, & Delivery of G.I Pipes class "C" conforming to IS 1239/PART I/2004 including transportation to anywhere in T.S, including G.I fitting etc complete for finished item of work as directed by Engineer- in-charge .etc.,complete as per standard specification

50mm ID GI

65mm ID GI

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

50 mm Dia

65 mm Dia

Supplying and fixing 50 mm kinetic air valves for handling more volumes of air in pumping main, double orifice kinetic air valve confirming to is 14845 tamper proof design (pn-1) and with 5 years warranty following dia complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. etc.,complete as per standard specification

Construction of RCC Chamber as per drawings for valves including earth work excavation, PCC of M10, M25 garde concrete for bottom slab and side walls with FE500 (TMT) reinforcement, precast frame and cover made of HD20 Grade and including all cost and conveyance of all materials, laying, vibrating, curing, shuttering, centering, supply, fixing and placing of steel and frbrication etc., and labour charges etc complete finish item of work as directed by the engineer. Sluice Valve Chamber (0.8 x 0.8 x 1 m) etc.,complete as per standard specification

Supplying fixing and commisioning of 3 HP Sumersible pumpset alongwith motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc.,complete as per standard specification

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for etc.,complete as per standard specification

Supplying and installation of PVC Water Storage tank etc.,complete as per standard specification

Lowering, Laying G.I pipes and specials to trench and laying to proper grade and alignment and jointing pipes and Specials and Testing of pipes for water supply with hydraulic testing equipment by filling with water (including cost of water) and testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc.,complete for the following diametres of pipes. all complete for finished item of work as directed by Engineer- in-charge . etc.,complete as per standard specification

15mm to 40mm dia (ID) G.I pipe - Lowering, laying & jointing

50mm to 65mm dia (ID) G.I pipe - Lowering, laying & jointing

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: HGURU / ISI MAKE / EQUIVALENT. etc.,complete as per standard specification

Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kiloliters / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3 m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ Die cast Aluminium/ Carbon steel with anticorriosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminum with glass window. The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished. etc.,complete as per standard specification a)65 mm dia

Supplying and fixing in position first quality and approved variety of Gun metal Non Return Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. etc.,complete as per standard specification a)65mm dia value

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil)

Supply and ru of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipeconcealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and fixing of 1 no.6A two module 5 pin socket 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 1 no.6/16A two module socket , 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.

Supply and run of 2 of 2.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipeconcealed in wall and ceiling with continuous earth wire connection of 1.5sq.mm copper wire and making good of theconcealed portion with suitable colour

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVCrigid pipe on wall and ceiling with continuous earth wire connection of 4sq.mm copper wire with painting of suitable colour

Suppl and laying of 3-1/2 x150 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth to make good

Suppl and laying of 4 x10 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth to make good

Suppl and laying of 2 x6 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection

Supply and fixing of brass cable gland for 4 x 16/10/6 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUGaluminiumarmoured cablewith necessary aluminium cable sockets by crimping etc., with electrical connection complete

Supply and providing cable end termination of 4 x 16/10/6 sq.mm. PVC LTUGaluminiumarmoured cablewith necessary aluminium cable sockets by crimping etc., with electrical connection complete

Supply and fixing of 12W LED 3000K round Type Recessed Fitting with LED , with Epoxy powder coated die cast aluminium housing in grey finish, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 5700K, minimum CRI>80, .etc., complete

Supply and fixing of 20 LED Tube Light T 8 Fitting (Single Side) Fitting with LED with Epoxy Powder coated die cast aluminium housing ingrey finish input voltage AC 220-260 Volts with PE> 0.9 Surge protection 2 KV THD< 10% with inbuilt driver and frosted cover CCT 700K minimum CRI > 80 etc completeLight Wall lamp Fitting with LED , with Epoxy powder coated die cast aluminium housing in grey finish,inpuvoltageA22260VoltwithPF>0.9,Surgeprotection:2KV,THD<10%, with inbuilt driver and frosted cover CCT: 5700K, minimum CRI>80, .etc., complete.

Supply and fixing of 9W LED Wall lamp Fitting with LED , with Epoxy powder coated die cast aluminium housing in grey finish, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 5700K, minimum CRI>80, .etc., complete. (DATA-B)

Supply and fixing of 40W LED Stellar LED post-top IP-66 and IK 10 rating ensures it stands tall amid varid environemtnal conditions, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and cover CCT: 3000K.etc.complete.

Supply and fixing of 15W LED IP 66 LED UP-down Luminaire with wall surface mounting using COB LED , input voltage AC 220 - 260 Volts with PF>0.9,, with inbuilt driver .etc., complete.

Supply and fixing of 40W LED IP66 aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of 60 W LED Aesthetically designed IP 66 LED post Top with aluminium enclosure, powered with high power LEDs as light source and die casted heat sink exhibiting classic Victorian look with symmetrical light distribution, suspended mounting arrangement , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete

Supply and fixing of 18m Flexible LED strips with optimum brightness & uniformity of light for perfect cove lighting. IP65 , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of Decorative IP66 LED spike light using COB LED, input voltage AC 220 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of 70W LED Acorrosion resistant, vertical surface mounting pressure die-cast aluminium housing (light engine) well glass luminaires with high power LED with symmetrical light distribution, suspended mounting arrangement , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of Decorative Single Arm S Round shaped and lengths to compliment the EROS LED Post Tops and Poles.etc., complete

Supply and fixing of Decorative Double Arm D Round shaped and lengths to compliment the EROS LED Post Tops and Poles.etc., complete.

Supply, Installation, testing and Commissioning of TPN Horizontal DB with IP43 Protection with 24Nos of 6-32A S.P. MCBs as out goings and 1No 63A 4-Pole MCB as Incommer etc complete as per IS 8623; IS 13032; IEC 61439-3 including internal connections and labour charges etc complete.

4 way TPDB 32 A / way with fuse & neutral link

4 way DB 16Amp / way with fuse & neutral each (250V)

Supply and fixing of 20A Plug and Socket in SS enclosure with 20A SP MCB including internal connection and labour charges for surface / flush mounting etc., complete.

Supply & Installation of AIR CONDITIONER WITH COPPER COIL as directed by the d epartm ent including cost and conveyance of all materials and labour charges etc complete

Supply & fixing of 12" 300mm Exhaust Fan 5 Star Rated (without Regulator) . Makes : As per list of recommended brands.

Supply and fixing of 1200mm (48") AC ceiling fan 5 Star Rated (without Regulator) with metallic blades with Mark makes As per list of recommended brands

Earth work excavation of Trench of size 0.3x0.9 x1.0M in all types of soils covering of laid cables/HDPE pipe, back filling of Trench duly providing cable route indicators embedded for every 8 Mtrs in C.C including cost and conveyance of all materials labour charges etc., complete.

90mm/76mm dia HDPE pipe

For laying in trenches inside or in air

Supply and laying of following sizes Earth wire/ Strip in horizontal / Vertical run in Ground/ surface/ Recess including, revitting, soldering, saddles and making connection etc as required

50 mm x 6mm GI Flat (2.5 Kgs/mtr)

25 x 6mm G.I strip

8 SWG GI wire (0.104Kgs/1Mtr)

Providing independent earthing by excavating a pit to a depth of 2.1 m with 0.3 m dia in soil using 40 mm dia 'B' class GI pipe of 2.5 m length having staggered holes, filling up the surrounding space around the pipe with Bentonite powder up to 1.8 m from the bottom and remaining space of the pit with loose earth and fixing hume pipe ring (3 mm Thick) with necessary accessories and proper connections including cost, conveyance of all materials, and labour charges etc., complete.

Supply and fixing of 2.5mm thickness upto 11KV PVC synthetic elastomer electrically insulated mat conforming to IS:15652-2006.

Supply of standard 18"x12"x8" first aid box with all standard contents..

Supply and fixing of suitable out door type street light and landscape lighting feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. [Makes : Legrand / Schnieder / L&T]

Supply and fixing of suitable out door type LT feeder pillar box made with 14 SWG CRCA sheet after 7 tank process including S & F 63A TP MCCB, 6 Nos TP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work. [Makes : Legrand / Schnieder / L&T]

Supply and Transportation of following dia double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II. [HDPE Pipe Make: Duraline (Duraguard)/ Percision or equivalent]

HDPE pipe 50mm outer dia

HDPE pipe 120mm / 103.50mm

100 KVA Diesel Generator Set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications with AMF Panel

Service connection from TNEB with out pole

GST at 18%

Please Enable Macros to View BoQ information