REPAIR OF ROAD OF AGE BR I AND AGE BR II AREA UNDER GE DANAPUR CANTT

Amount

M&L for repair to pot holes any depth , not exc 1 sqm each including sweeping free from dust and mud, or water , scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal , watering and well ramming with 8 to 10 tonne power roller ( including supply of road metal) complete all as specified.

M&L Repairs to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat at 5 Kg/10 sqm , putting in premixed bituminous macadam using paving bitumen of grade VG-30, well rammed , and sealed with binder 9.8 Kg/10 sqm , blinded with 0.09 cu.m. of stone chippings , 6.3 mm size and again well rammed ( including supply of premixed macadam, binder and chippings etc.depth of pot holes exceeding 30 mm all as specified and directed.

Preparing Black top surfces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with air compressor to remove all loose dirt etc.complete all as specified.

M&L applying evenly a tack coat with VG-10 grade bitumen at 5Kg/10 Sqm on existing black top surfaces complete all as specified.

M&L Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5 % binder content by weight of total mix using bitumen of grade VG-30 by mechnical paver, rolled and compacted to required camber and gradient complete all as specified. Note :- Mixing shall be done in hot mix plants

M&L for laying hot applied thermoplastic compound (paint) 2.5 mm thick including reflecterising materials glass beads including cost of all materials labour machineries and T&P etc required for proper completion of work including all other charges. The finish surfaces to be level, uniform and free from streaks and holes as per specification No 803 as per IRC painting lines, dashes, arrows and letters etc on roads, pavements and the like not exc 10 cm wide with road marking paint, white or golden yellow all as specified and directed.

M&L Premix bituminous, macadam, laid/ rolled and compacted to required gradient and camber ( consolidated) thickness 75 mm or less using paving bitumen of grade VG-30 as binder @ 4% by weight of total mix using mechanical paver and rolled with 8 to 10 tonne power road roller to a uniform smooth surface completed all as specified and as directed. Note :- Mixing shall be done in hot mix plants

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed.

S&F 200mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as spd and directed.

M&L for of PCC 1:3:6 type C 2 using 40mm graded stone aggregate for bed to drain pipes including packing under and completely surrounding pipes of 200mm dia with concrete after they are laid and tested; complete all as spd and directed.

M & L for Solar Road Studs (Cat eye), alluminium alloy die casted, of size not less than 132mm (L), 65mm(W) & 25mm(th) , 6 LEDs (03 Nos on each side) installed with gum fix of approved quality and water proof grade should greater than IP67 complete all as spd and directed. Make-SUN EYEZ, DARK EYE, H2 SAFETY INDIA, GREEN LITE, Model No-SS-1001 or equivalent as approved by the GE.

M & Road Studs (Cat eye), alluminium sutd with stem, of size not less than 132mm (L), 65mm(W) & 25mm(th) , 6 LEDs installed with gum fix exch of approved quality and water proof grade should greater than IP67 complete all as spd and directed. Make-SUN EYEZ,DARK EYE, H2 SAFETY INDIA, GREEN LITE, Model No-SS-505 or equivalent as approved by the GE.

S&F PVC spring type Road delinators of 70mm to 80mm dia and 750mm high fixed with long scerw complete all as spd and directed. Make-SUN EYEZ,DARK EYE, H2 SAFETY INDIA, GREEN LITE and Equivalent as approved by the GE.

S&F convex Mirror made up of polycarbonate reflected mirror, body is made up of ABS/fiber/plastic and suitable for outdoor use with of 600mm size with post of suitable height. Make-SUN EYEZ,DARK EYE, H2 SAFETY INDIA, GREEN LITE and Equivalent as approved by the GE.

Jupiter International Sales