CA NO. GE AF NO.1/GUR-23/2024-25 REPAIR, MAINTENANCE , PERIODICAL SERVICES AND OVERHAULING OF UNSERVICEABLE ENGINE , ALTERNATOR, OVER HEAD ELECTRIC CRANE AND CONNECTED WORKS AT AF STATION GURGAON UNDER GE (AF) GURGAON NO 1..

Amount

M&L for Serviceing and periodical maintenance of DG sets of following capacity including cleaning internal parts thoroughly , replacement of oil filter, fuel filter, air cleaner, turbo charger etc and making smooth valve seats of inlet and exhaust valves including replacement of minor parts such as nut, bolts, washers, benjo nut, bolts, washers, locking nuts, circlips, `O’ Rings, Gasket, main cylinder head joint screws, stud small springs as deemed necessary or ordered complete and reassembling after replacement of unserviceable parts including painting with one coat of syntheteic enamemled paint of existing colour after removing dust, dirt and oil by castic soda etc, commissioning and testing on connected load complete all as specified and directed by Engineer-in-Charge of the following DG Sets:- (Note : The quoted rates of the contractor includes for fixing the serviceable parts in position and replacement of unserviceable parts with new parts. The new replaced spare parts which are catered in BOQ for supply only shall be measured and paid for separately . However essential minor parts/work which is required for sound engineering practice shall be deemed to include in the coated rate of this item):-

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100 KVA DG Set.

400 KVA DG Set.

500 KVA DG Set

Supply only of Lubricant oil filter element complete with plane washer, 'O' ring etc. complete all as specified and as directed by Engr-in-charge to incorporate in DG Sets repairs against items No 1 here-in-before for the following:- (Make-Mico/Flit Guard/ Donalson)

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100 KVA DG Set.

400 KVA DG Set.

500 KVA DG Set

Supply only of Fuel filter element complete with plane washer, 'O' ring etc. complete all as specified and as directed by Engr-in-charge to incorporate in DG Sets repairs against items No 1 here-in-before for the following:- (Make-Mico/Flit Guard/ Donalson)

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100 KVA DG Set.

400 KVA DG Set.

500 KVA DG Set

Supply only of Air filter element complete with plane washer, 'O' ring etc. complete all as specified and as directed by Engr-in-charge to incorporate in DG Sets repairs against items No 1 here-in-before for the following:- (Make-Mico/Flit Guard/ Donalson)

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100 KVA DG Set.

400 KVA DG Set.

500 KVA DG Set

Draining-out unsv lubrication oil from DG Sets of 10 to 400 KVA capacity of any make, cleaning thoroughly the same including supply and filling lubrication oil SAE-40 into the chamber/sump complete all as specified and directed Engineer-in-Charge. Make SERVO OF IOC/HINDUSTAN PETROLEUM/BPCL

Supply only flexible pipe, filter to lub oil cooler including banjo bolt washers, copper asbestos washer, spring washer nuts and bolts etc for following DG sets :-

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100 KVA DG Set.

Supply only V Belt to incorporate in DG Sets against item No 1 here-in-before complete all as specified and directed by Engineer-in-Charge for the following DG Sets :-

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100 KVA DG Set.

Draining out the diesel tank, cleaning / washing out the sedimentation using Kerosine and re-filling with diesel upto 100KVA DG sets (Note: Diesel will be provided by the department)

Same as per 8 but for above 100 to 500KVA DG Set

M&L for rewinding of alternator with approved copper wire all as per specified and directed by Engr-in-charge of the following DG Sets:-

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100/160/250 KVA DG Set.

M&L for replacement of bearings and other parts of alternator complete all as specified and directed by Engr-in-charge of the following DG Sets:-

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

Supply and fix nozzle assembly complete with washer, banjo, bolt, copper washer etc suitable for 100 KVA DG set diesel engine set complete all as specified and directed by Engineer-in-Charge.

Supply and fix leak off pipe assembly for nozzle assembly complete all as specified and directed by Engineer-in-Charge.

M&L for disconnecting and taking down fuel filter assembly, cleaning thoroughly fuel filter housing complete and replacement of the fuel filters/fuel pipe etc complete all as specified and directed by Engineer-in-Charge. (Supply of item measured and paid seperately).

Supply only of Prefilter insert with sealing ring Make Mico Cat No 9451037404 complete all as specified and as directed by Engr-in-charge.

Supply only of Flexible fuel pipe cat No 34035030 complete all as specified and as directed by Engr-in-charge.

M&L for disconnecting and taking down old unserviceable self starter, 12/24Volt and dismantling complete for repair and replacement of the Following parts :- (a) Armature – 01 No (b) Solenoid switch – 01 No. (c) Field coil – 01 No. (d) Commutator – 01 Nos. (e) Carbon brush – 02 Nos. (f) Bendix drive – 01 Nos

S&F in replacement of water Temp sensor of upto 400KVA DG set complete all as specified and as directed by Engr-in-charge.

Disconnecting and taking down old unserviceable worn out 12/24 volts dynamo from the DG set, supply and fix, test new alternator A-115, 12/24 V with and incl. complete accessories such as connection , wiring, Nuts, Bolts Bracket for alteration, plain washer, spring washer, screws etc all as specified and directed. Make: LUCAS/Kirloskar/Cumins.

Supply and fix in replacement of complete radiator assembly suitable upto 40 KVA DG Set with all accessories such as Joints hoses, hose clip, nuts, bolts, washer, spring washers spacer, Fan guard, anti-vibration pad, screw sets etc complete all as specified and directed by Engineer-in-Charge.

Same as per item No 17 but for above 40 to 100KVA DG Set complete all as specified and directed by Engr-in-Charge

Supply only following spare parts for water pump assembly as repaired complete all as specified and directed by Engineer-in-Charge:-

Ball bearing –SKF-6203

Ball bearing –SKF-6303

Shaft for water pump

Bronze Impeller

Supply and fix battery leads 16sqmm, heavy duty copper stranded conductor 1.5 mtr long with copper/brass clamps fix and lux for fixing on Battery terminals and self starter complete all as specified and directed by Engineer-in-Charge..

Supply and fix brass terminal for batteries including taking out and removing existing unserviceable terminals complete all as specified and directed by Engineer-in-Charge.

BLANK

BLANK

Dismantling the radiator of following DG sets, cleaning and de-scaling of chocked water tubes and jackets of radiator, cleaning the fins of radiator with acid and Jet spray including brazing of worn out copper tubes, body and for removing all chocked from the pipes by pressure washing and by using suitable solutions, checking for leakage, arresting leakage if any do welding / brazing, fusing, drying and refixing including replacement of the worn out minor spares such as Joint Hose Pipe, plain washers, spring washers, screws nuts, bolts, joints, rubber hoses with clip etc complete all as specified and directed of the following DG sets:-

10/15/20 KVA DG Set.

25/30/40 KVA DG Set.

60/63/75 KVA DG Set.

100 KVA DG Set.

400 KVA DG Set.

500 KVA DG Set

Supply and filling Coolant complete all as specified and directed by Engineer-in-Charge. Make : Castrol/HP/Power Oil

Supply and fix in replacement of unserviceable AVR for 15 to 40 KVA GEN SET, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of unserviceable AVR for 160 to 250 KVA GEN SET, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement maintenece free battery (24 months replacement warranty) duly initial charged 12 volt 180 AH complete all as specified and directed by Engr -in-charge.

Supply and fix in replacement maintenece free battery (24 months replacement warranty) duly initial charged 12 volt 90 AH complete all as specified and directed by Engr -in-charge.

S&F in replacement Automatic transfer switch(ATS) Confirming to IEC: 60947-1 and IEC: 60947-6-1, four pole, AC-33A, 50 Hz 440 volt automatic/manual with in built time delay of capacity 200 Amps, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Voltage monitor relay (3 phase ) AC : 110/ 415Volt Setting 75 -100/300 - 400 V, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Over current relay definite time Non directional ,definite time & current adjustable setting 0.5 -5A 1-10A /0.1-1A time 0-10 sec, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Battery Volt relay 12/24 volt DC, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Timer AC/DC on delay -sec, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Battery charger 12 volt complete all as specified and directed by Engineer-in-Charge

Supply only shut down coil suitable upto 400 KVA DG SET complete all as specified and directed by Engineer-in-Charge.

Taking out Unsv MCCB and supply and fix new Moulded Case Circuit Breaker (MCCB) AN frame of capacity 100 Amps, Four pole, 415 volts, 35 KA fixed thermal & fixed magnetic setting complete all as specified and directed by Engineer-in-Charge.

Taking out Unsv MCCB and supply and fix new Moulded Case Circuit Breaker (MCCB) AN frame of capacity 200 Amps, three pole, 415 volts, 25 KA fixed thermal & fixed magnetic setting complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Solenoid switch 12 volt, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of HRC Fuse Link 125/100 A, 415 V AC, DIN Type, 100 KA. complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Changeover switchs of capacity 200Amps ,4 pole ,offline manually operated 415V , 50 Hz conforming IS/IEC 60947-1 & 3 complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Changeover switchs of capacity 160 Amps, 4 Pole offline manually operated 415V , 50 Hz conforming to IS/IEC 60947-1 & 3, complete all as specified and directed by Engineer-in-Charge.

S&F in replacment 3 Pole power contactor - Type MNX 110 of AC 1 current rating 160 Amp and AC3 rating 110 Amp with auxilary contact 2NO + 2 NC, complete all as specified and directed by Engineer-in-Charge. Cat Part No CS 94137 of make L&T or equivalent out of makes specified in list of makes.

S&F in replacment 3 Pole power contactor - Type MNX 95 of AC 1 current rating 160 Amp and AC3 rating 95 Amp with auxilary contact 2NO + 2 NC, complete all as specified and directed by Engineer-in-Charge.

S&F in replacment 3 Pole power contactor - Type MNX 150 of AC 1 current rating 160 Amp and AC3 rating 150 Amp with auxilary contact 2NO + 2 NC, complete all as specified and directed by Engineer-in-Charge. Cat Part No CS 94137 of make L&T or equivalent out of makes specified in list of makes.

M&L for painting of DG Sets (upto 400 KVA) with two coats of synthetic enamel paint of approved quality and shade over one coat of red oxide primer after preparing the surfaces (inner and outer) complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of Engine Safety Unit (ESU) of upto 40 KVA rating of DG Set in 54 ASP complete all as specified and directed by Engineer-in-Charge. .

Same as per item No above but for 40KVA upto 100KVA rating of DG Set complete all as specified and directed by Engr-in-Charge

M&L for repair and testing of Control Panel/AMF Panel of any type upto 500 KVA rating of DG set capacity including programming , full copper wiring complete with washer, banjo, bolt, copper washer etc . (This includes the item involved in the repair and programming and S&F of other related items) complete all as specified and directed by Engineer-in-Charge.

Supply only Voltage Monitoring Relay 415 V, AC under Voltage complete all as specified and directed

Supply only Timer Switch 240V complete all as specified and directed

Supply and fix push button complete all as specified and directed

Supply only Voltage Amphere Frequency meter complete all as specified and directed

Supply only CT 900/5 complete all as specified and directed

Supply only Under Voltage Trip kit , 240V complete all as specified and directed

Supply only Control MCB SP 06-32 Amp, C Curve, 10KA complete all as specified and directed

Supply only Programmable Logical Array relay 24V DC including base plate complete all as specified and directed

Supply and fixing MXO contactor complete all as specified and directed

Supply only battery charger 24 V DC having the light for showing the supply , Battery full and charging complete all as specified and directed

Supply and fix in replacement of new Lock System set for multiple door DG Set complete of any KVA rating and any make complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement of RPM Indicator complete all as specified and directed by Engineer-in-Charge. Make-Nippon or equivalent out of makes specified in list of makes.

Supply and fix in replacement of unserviceable AVR for 63 to 100 KVA GEN SET, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of unserviceable Feed Pump for any KVA DG set all as specified and directed by Engr-in-Charge.

S&F in replacement of unserviceable Thermostat Valve for any KVA DG set all as specified and directed by Engr-in-Charge.

S&F 3 core, 2.5Sqmm FRLS flexible copper wire all as specified and directed by Engr-in-charge.

M&L in replacement of door hinges of upto 100KVA DG set complete all as specified and directed by Engr-in-Charge.

S&F in replacement of Fuse 200A, 415V, 14.5W HN Size 0 , 100 kA gG, SF94132, IS13703(PART II) IEC 60269-2 complete set all as specified and directed by Engr-in-Charge

S&F in replacement of DG Set display SEDEMAC KG 645 complete set all as specified and directed by Engr-in-Charge

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 240 Sq mm, 3.5 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 120 Sq mm, 3.5 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm, 3.5 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 95 Sq mm, 3.5 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 50 Sq mm, 3.5 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm, 3.5 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm, 3.5 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Supply, laying and testing in replacement of LT XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable, heavy duty, 1100 Volts grade with stranded aluminium conductor of size 16 Sq mm, 4 core on pole, under floor, in pipe complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in soft/loose soil , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc, complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in Hard standing , not.exc 1.5 mtr wide and not.exc 1.5 mtr deep and getting out in soft/loose soil for laying of cable/foundation of pole and stay etc, complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above ground level from starting point, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation ( to the thickness 18cm) complete all as specified and directed by Engineer-in-Charge. Note:- For the purpose of payment compacted / punned thickness shall be measured.

Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete all as specified and directed by Engineer-in-Charge.

Load Testing of all Gantry cranes as per IS code with no load and with 2 Ton load by an authorized company complete all as specified and directed by Engineer-in-Charge. Note: the rate for T&P required for shifting of load from one location to another is also included & test certificate will also be provided by the contractor after load testing.

M&L for Comprehensive Maintenance and repair of Electrical Overhead Gantry Cranes of Capacity 2 Tonne by Lubrication gears, Chain and Spockets arrangements in every quarter through out the year and repair / replacement all unserviceable parts, so that motion limiting devices are functioning properly, such as hoisting, limiting devices, cross-traverse and long travel limiting devices and pendent controllers with acceleration control with electrical protective devices complete all as specified and directed by the Engr-in-Charge. Note :- All New parts required for replacement are deemed to be included in the item rate except major parts which will be measured & paid seperately under relevant items here-in-after.

Supply only following Spare Parts of Gantry Cranes installed at different locations of Air Force Station Gurgaon, complete all as specified and directed by Engineer-in-Charge:-

Pendent Control Station Starter.

Contactor for Long Traverse Motor.

Contactor for Cross Traverse Motor.

Contactor for Hoisting(Lifting / Lowering) Motor.

Spocket Chain for Lifting and Lowering.

Spocket Main Gear drive by Chain as per Sample.

Bearing for E O T Crane of 2 Ton Capacity.

Supply only Distilled Water for Batteries all as specified and directed by Engr-in-Charge.

S&F in replacement thurst brake of EOT crane all as specified and as directed by Engineer in charge

S&F switching mode power supply for spike barrier having input voltage of 110 -220 V , output voltage 12 V , 50 HZ frequency complete all as specified and as directed by Engineer in charge

S&F switching mode power supply for spike barrier having input voltage of 110 -220 V , output voltage 24 V , 50 HZ frequency complete all as specified and as directed by Engineer in charge

M&L for locating the fault in EOT crane of 2 Ton capacity including rectification of minor defects such as tightening of nut and bolts, checking and rectifying loose connection of control panel, accessories and current collectors replacing of fuse wire etc to keep the crane functional and making the movement of entire unit as specified and directed by Engr-in-charge

S&F limit switch 16 A , 250 V AC complete with necessary arrangement to fix panel of spike barrier complete all as specified and as directed by Engineer in charge

Labour and T&P for Shifting of DG Set by Crane and related required accessories within 54 ASP Domestic area, G Block and Technical area as specified and directed, complete all as specified and directed by Engineer-in-Charge.

M& L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground(earthpit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth strip of 32 x 6 mm with GI Pipe 40mm Light grade for protection by means of bolts, nuts and check nuts and washers of GI or steel all as shown in Electrical plate No 3 including earth work funnel with watering arrangement, wire mesh, GI pipe 20mm internal dia light grade buried directly vertical and adjacent to the electrode for watering , PCC pit 1:3:6 type C1 and RCC chamber cover in 1:2:4 type B1 of size 550 x 550mm with 8 mm dia TMT bar of 100mm C/C both ways including of returning, filling in and removal of surplus soil to a distance not exc 50 m as specified and directed by Engr-in-charge including testing on completion. Note: The strip/wire upto 7.5mtr included in the quoted rate.

Servicing reconditioning of 90/150/180 AH battery with change the electrodes any make and including change of UNSV elecrodes set with new one complete all as specifed and directed by Engr-in-charge.

M&L for Rewinding of main host motor of 10H P AC type Induction type, 3 phase by super enamelled Copper winding wire of same gauge as of existing one including heating, varnishing and testing after completion, complete all as specifed and directed by Engr-in-charge.

M&L for Rewinding of motor of 5 HP AC type , induction type, 3 phase by super enamelled Copper winding wire of same gauge as of existing one including heating, varnishing and testing after completion, complete all as specifed and directed by Engr-in-charge.

Supply, installing, testing and commissioning factory made in replacement of AMF panel w/o accessories with new AMF Panel 20 KVA Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system. The panel shall be dust and vermin proof, protection class (IP-54) and made of 3.00 mm thick CRCA mild steel sheet and mild steel, Mounting Channel work made out of 75 mm ), front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. The scope of work also comprising of the following:-

(a) Under Voltage relay 415V AC for main -1 No. (b) Under voltage relay 415 V AC for DG - 1 No. (c) AC Timer 230 Volt , 2 No. +2 NC - 1 No. (d) DC Timer 12/24 V - 1No. (e) Engine Start relay 12/ 24 V- 1 No (f) Control MCB SP 6 Amp. 230 V – 9 Nos. (g) Control MCB SP 16 Amp. 230 V – 2 Nos. (h) Battery Charger 12/24 DC - 1 No. (i) LED Indicating Light for Main & DG—6 Nos (j) LED Indicating Light for Main & Gen. ON – 2 Nos. (k) LED Indicating Light for battery Charger –1 No. (l) Digital Volt meter ( 0-500 V ) 96 mm X 96 mm - 1 Nos. (m) Digital Amp meter ( 0-60 A ) 96 mm X 96 mm - 1 Nos.

The AMF Panel manufacturer should have following Govt. Approved Certificates: 1. Panel should be according to IEC-61439. CPRI Certification Degree of Protection IP-54 (IS/IEC : 61439 (Part-1), 2011 & IS/IEC : 61439 (Part-2) 2011) 2. Tempreature Rise (IS/IEC : 61439-1, 2011 & IS/IEC : 61439-2 2011) 3. CPRI Short Circuit IEC-61439-1 & 2 withstand strenght should be 70kArms for 1.0 Sec with intial peak of 154kApk 4. CPRI Certification IEC-61439-1 & 2 Rated current for short circuit not less than 4000 A with rated insulation voltage 660V 5. ISO 9001 CERTIFIED

S&F FRLS copper cable 19core, 1.5 Sqmm complete all specified and directed by Engr-in-Charge

Excavation over areas n exc 1.5 m deep and getting out in soft loose soil complete all as specifed and directed by Engr-in-charge.

M&L for PCC in foundations, filling and mass-concrete 1:3:6 type-C2 using 40 mm graded stone aggregate complete all as specified and directed

M&L RCC 1:2:4 (Nominal mix) type B-1 using 20 mm graded crushed stone aggregate as in foundations for placing DG set and mass concrete complete all as specified and directed. Notes :- (i) Concrete block should be in one water level and spirit level to be used to check flatness of the block surface. (ii) Foundation should be design considering safe bearing capacity of soil and DG set static and dynamic load. Anti-Vibration Mounts (AVMs) are provided to reduced generator set and noice transmission to the surrounding structure as per OEM of DG set instructions.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter fair finished surfaces of concrete flat complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

S&F in replacement NO, push type element all as specified and directed by Engr-in-Charge

S&F in replacement NC, push type element all as specified and directed by Engr-in-charge

S&F in replacement of Fuji Electric Frenic Ace Drives complete all as specified and directed

Servicing and repair of AMF Air circuit braker type of 500KVA DG Set including racking out ACB operating mechanism, cleaning using falalen cloth, Oiling and greasing complete all as specified and directed by Engr-in-Charge

Ditto as per item above but for 400KVA DG Set complete all as specified and directed by Engr-in-Charge

S&F in replacement of ACB Pole assemble suitable for 630 Amps Capacity, 4 Pole all as specified and directed by Engr-in-Charge

S&F in replacement of Fuse 630Amps, 3 Pole complete all as specified and directed by Engr-in-Charge

S&F in replacement of Side handle complete accessories all as specified and directed

S&F in replacement of Overload relay 100-130V, AC & DC communicable type(Three Wire) complete all as specified and directed by Engr-in-Charge

S&F in replacement of FTC FBD-630 HRC FUSE BASE 630 AMP DMC MOULDED Electrical Fuse (630 A) complete all as specified and directed by Engr-in-Charge.

M&L for Rewinding of main host motor of 3 H P AC type Induction type, 3 phase by super enamelled Copper winding wire of same gauge as of existing one including heating, varnishing and testing after completion, complete all as specifed and directed by Engr-in-charge.

M&L for Rewinding of main host motor of 0.50H P AC type Induction type, 3 phase by super enamelled Copper winding wire of same gauge as of existing one including heating, varnishing and testing after completion, complete all as specifed and directed by Engr-in-charge.

Supply and fixing in replacement LED Flood Lights 200Watt, CCT not less than 5700K and efficacy not less than 100lm/W with single piece pressure die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control gear. LEDs are surrounded with aluminium reflector for better light distribution and control. This bottom opening flood right range is with IP66 degree of protection, impact resistance of IK 07 and integrated driver with 5KV Inbuilt surge protection for better enhanced features complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement LED Flood Lights 50Watt, CCT not less than 5700K and efficacy not less than 100lm/W with single piece pressure die-cast aluminium housing with dedicated heat sink and toughened glass with inbuilt control gear. LEDs are surrounded with aluminium reflector for better light distribution and control. This bottom opening flood right range is with IP66 degree of protection, impact resistance of IK 07 and integrated driver with 5KV Inbuilt surge protection for better enhanced features complete all as specified and directed by Engr-in-Charge.

Supply only Gear oil EP 90 complete all as specified and directed by Engr-in-Charge

Notes:- (a) The amount of Rs 1,00,050.00 against Schedule of Credit shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. (b) The items supplied by contractor as supply only shall be taken on charge by deptt. (c) Any disturbed surface during execution of work shall be made good as existing. Nothing extra shall be paid in this respect. The quoted rate are deemed to be included the same cost.

OM ASSOCIATES

M/S Anand Enterprises

shakti construction