PROVN OF TECH ACCN FOR MDC AT BENGDUBI

Amount

BUILDING AND STRUCTURE (Sch 'A' PART-I)

Lump sum price worked out by the Contractor for “BUILDING AND STRUCTURE” as listed in Schedule ‘A’ Part-I Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,17,25,000.00 inserted by the MES in Schedule ‘A’ Part-I(A).

EXCAVATION & EARTHWORK FOR SITE CLEARANCE AND AREA DEVELOPMENT, OTHER SCHEDULES (EXCEPT SCH 'A' PART-I) (Sch 'A' PART-II)

Lump sum price worked out by the Contractor for “EXCAVATION & EARTHWORK FOR SITE CLEARANCE AND AREA DEVELOPMENT, OTHER SCHEDULES (EXCEPT SCH 'A' PART-I)” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,69,300.77 inserted by the MES in Schedule ‘A’ Part-II.

EXCAVATION & EARTHWORK FOR SITE CLEARANCE AND AREA DEVELOPMENT, OTHER SCHEDULES (EXCEPT SCH 'A' PART-I) (Sch 'A' PART-II(A))

Lump sum price worked out by the Contractor for “EXCAVATION & EARTHWORK FOR SITE CLEARANCE AND AREA DEVELOPMENT, OTHER SCHEDULES (EXCEPT SCH 'A' PART-I)” as listed in Schedule ‘A’ Part-II. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 84,086.07 inserted by the MES in Schedule ‘A’ Part-II(A)

EXCAVATION & EARTHWORK FOR SITE CLEARANCE AND AREA DEVELOPMENT, OTHER SCHEDULES (EXCEPT SCH 'A' PART-I) (Sch 'A' PART-II(B)) (MISC))

M&L Site development with approved earth to be obtained from outside MOD land and filling including raising (or lowering) soft/loose earth, spreading in layers not exc. 30cm thick, watering, ramming/rolling with power roller (8 to 10 Tonne) and finishing to required size, shape, etc, to any heigth from original ground level complete all as specified and as directed. NOTE: - (i) Payment shall be done on the basis of compacted thickness as defined in MES SSR 2010 (Part II) Clause No 3.6. (ii) All cost of procurement of earth including cost of transporation, royalities, taxes etc shall be deem to be included in the Unit Rate Quoted. (iii) Quoted rates are inclusive of necessary surface dressing including removing of surplus soil as directed

Sub total

INTERNAL WATER SUPPLY (Sch 'A' PART-III)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY (Sch 'A' PART-III)” as listed in Schedule ‘A’ Part-III. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 38,716.20 inserted by the MES in Schedule ‘A’ Part-III.

INTERNAL WATER SUPPLY (Sch 'A' PART-III(A) (MISC))

Supply and fix health faucet (ABS body) with 01 metre long PVC tube & wall hook complete all as specified and directed. complate all as specified and directed.

Supply and fix 15mm bore CP two way bib cock/tap complete all as specified and directed

Sub total

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV)

Lump sum price worked out by the Contractor for “(INTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-IV. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 5,521.00 inserted by the MES in Schedule ‘A’ Part-IV.

INTERNAL ELECTRIFICATION (Sch 'A' PART-IV(A) (MISC))

M&L for concealed point wiring for One Light point controlled by one switch 5/6 Amps complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LS (ISI markd) as earth continuity conductor connected to common earth dolly , fabricated sunken terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes upto a size of 200x300 mm and above this size not less than 1.63 mm thick duly painted, conceled in walls, with 3mm thick bakelite/plastic laminated sheet top cover fixed with cadimum plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed all as specified and as directed.

M&L for concealed point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover for housing switches, socket outlets, fan regulators etc duly earthed all as specified and as directed for the following :-

(a) One Light point controlled by one switch 5/6 Amps.

(b) One Celing/Exhaust Fan point controlled by one switch 5/6 Amps.

(c) One call bell point controlled by one bell push.

(d) One light point controlled by 2 Nos, two way switches 5/6 Amps

(e) One switch socket out let point 5/6 Amps on independent board.

M&L for concealed point wiring complete with 2.5 Sqmm single core PVC insulated unsheathed FR-LSH cable 1100 volts grade (ISI marked) with multistranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 2.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FR-LSH (ISI markd) as earth continuity conductor connected to common earth dolly , modular sheet steel sunken terminal box suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover for housing switches, socket outlets, fan regulators etc duly earthed for 15/16 Amps switch-socket outlets etc. on independent board complete all as specified and as directed.

S & F Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S & F Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S & F Modular switch, single pole, Two way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S & F Modular Bell push, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S & F Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S & F Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F stepped type modular electronic fan regulator 120 watt two module suitable for 1200/1400 mm sweep energy saving fans, 2 Module, ISI marked complete all as specified and directed.

S&F distribution board vertical type TPN including one MCCB 4 Pole 160 Amps 16 KA as incomer, double door IP 43 protection, 8 way, with copper Bus Bars, Neutral Links,Earth link,Earthing studs, Blanking Plates, fixed flush to wall/other surface complete all as specified and as directed. Note : Outgoing MCBs measured and paid seperately under relevant item

S&F distribution board TPN double door IP 42 protection, 4 way (8in + 12out), with copper Bus Bars, Neutral Links,Earth link,Earthing studs, Blanking Plates, fixed flush to wall/other surface complete all as specified and as directed. Note : Incoming/Outgoing MCBs/RCBO measured and paid seperately under relevant item

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, Single pole and Neutral, with 100 amps rated copper bus bar (as per OEM), neutral link, earth link, earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 6 way, Single pole and Neutral, with 100 amps rated copper bus bar (as per OEM), neutral link, earth link, earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, Single pole and Neutral, with 100 amps rated copper bus bar (as per OEM), neutral link, earth link, earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 12 way, Single pole and Neutral, with 100 amps rated copper bus bar (as per OEM), neutral link, earth link, earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and directed.

S&F MCB Tripple pole and neutral (FP) 80 amps, 10 KA, 440 volts all as specified and directed.

S&F MCB Tripple pole (TP) 80 amps, 10 KA, 440 volts all as specified and directed.

S&F MCB Tripple pole (TP) 63 amps, 10 KA, 440 volts all as specified and directed.

S&F MCB Single pole and neutral (SPN) 20 amps, 10 KA,‘C’ curve, 240 volts all as specified and directed.

S&F MCB Single pole and neutral (SPN) 32 amps, 10 KA,‘C’ curve, 240 volts all as specified and directed.

S&F MCB Single pole and neutral (SPN) 40 amps, 10 KA,‘C’ curve, 240 volts all as specified and directed.

S&F MCB Single pole (SP), 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed.

S&F RCBO,SPN, 20 Amp rating, 2P, 240 V, 50 Hz, with 10 kA short circuit capacity with sensitivity of 30mA, as per IS-12640-2 all as specified and as directed.

S&F RCBO,SPN, 32 Amp rating, 2P, 240 V, 50 Hz, with 10 kA short circuit capacity with sensitivity of 30mA, as per IS-12640-2 all as specified and as directed.

S&F RCBO,SPN, 40 Amp rating, 2P, 240 V, 50 Hz, with 10 kA short circuit capacity with sensitivity of 30mA, as per IS-12640-2 all as specified and as directed.

S&F RCBO,TPN, 63 Amp rating,4P, 440 V, 50 Hz, electromechanical with 10 kA short circuit capacity with sensitivity of 30mA, as per IS-12640-2 all as specified and as directed.

S&F Metal plug and socket assembly, Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amp 'C' curve fixed flush to wall/other surface complete all as specified and as directed.

M&L for submain wiring for main DBs to Sub DBs with PVC insulated unsheathed FR-LSH cable 1100 volts grade of size 25 Sqmm x 4 run alongwith earth continuity wire connected from main earth of size 16 Sq mm x 2 run, ISI marked multi stranded copper conductor single core cable drawn in and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc of size 40 mm as requried as specified and as directed. Note : Four runs of 25 sqmm conductor for main and Two run of 16 sqmm conductor as earth wire with PVC conduit shall be measured as one unit length.

M&L for submain wiring for main DBs to Sub DBs with PVC insulated unsheathed FR-LSH cable 1100 volts grade of size 16 Sqmm x 4 run alongwith earth continuity wire connected from main earth of size 16 Sq mm x 2 run, ISI marked multi stranded copper conductor single core cable drawn in and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc of size 40 mm as requried as specified and as directed. Note : Four runs of 16 sqmm conductor for main and one run of 16 sqmm conductor as earth wire with PVC conduit shall be measured as one unit length.

M&L for submain wiring for main DBs to Sub DBs with PVC insulated unsheathed FR-LSH cable of size 10 Sqmm x 2 run alongwith earth continuity wire connected from main earth of size 10 Sq mm x 1 run, ISI marked multi stranded copper conductor single core cable drawn in and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc of size 25 mm as requried as specified and as directed. Note : Two runs of 10 sqmm conductor for main and one run of 10 sqmm conductor as earth wire with PVC conduit shall constitute one unit.

M&L for submain wiring for main DBs to Sub DBs with PVC insulated unsheathed FR-LSH cable 1100 volts grade of size 6 Sqmm x 2 run alongwith earth continuity wire connected from main earth of size 6 Sq mm x 1 run, ISI marked multi stranded copper conductor single core cable drawn in and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc of size 25 mm as requried as specified and as directed. Note : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with PVC conduit shall constitute one unit.

M&L for submain wiring for main DBs to Sub DBs/Plug & Sockets with PVC insulated unsheathed FR-LSH cable 1100 volts grade of size 4 Sqmm x 2 run alongwith earth continuity wire connected from main earth of size 4 Sq mm x 1 run, ISI marked multi stranded copper conductor single core cable drawn in and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc of size 25 mm as requried as specified and as directed. Note : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with PVC conduit shall be measured as one unit length.

S&F MCCB 4P (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting having breaking capacity 25/26 KA of rating 160A including electric connection complete all as specified & as directed

S&F LED batten surface/ wall mounted with Aluminum housing & integrated electronic driver, with LED 18 watt 4 feet long fixing on PVC block complete with all accessories, prewired and flexible wire twin core from ceiling rose to terminal block all as directed.

S&F LED lumanaries (2' x 2'), recessed mounting energy saving low-glare LED 28 watt including LED lamps and driver with other accessories and necessary electric connection complete all as specified and as directed.

S&F LED lumanaries (2' x 2'), surface mounting energy saving low-glare LED 28 watt including LED lamps and driver with other accessories and necessary electric connection complete all as specified and as directed.

S&F LED lumanaries (2' x 2'), surface mounting energy saving low-glare LED 36 watt including LED lamps and driver with other accessories and necessary electric connection complete all as specified and as directed.

S&F LED lumanaries (2' x 2'), surface mounting energy saving low-glare LED 15 watt including LED lamps and driver with other accessories and necessary electric connection complete all as specified and as directed.

S & F energy saving & environment friendly long life 20 Watt, CT >=5700 K, LED building security light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, surge suppressor of 5 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz complete including connecting up with and including three core twisted flexible copper conductor cable of suitable size all as specified & as directed.

Supply, install, testing & commissioning of ceiling fan 1200 mm sweep, Air Delivery not less than 210 CMM, heavy duty, single phase, AC, 230 Volts, 50Hz, 5 star rating, ISI marked complete with 30 cm down rod, canopy, blades, motor etc and connecting up complete including provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan complete all as specified & as directed.

Supply, install, testing & commissioning of exhaust fan with automatic back shutter louvers 250 mm sweep, 1400 RPM or more, Air Delivery not less than 860 CMM, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3 core of size 0.75 Sqmm from ceiling rose to fan including making of suitable sized hole in the wall for fixing of the exhaust fan & making good the disturbed surfaces complete all as specified & as directed.

S&F wall fan, 450 mm sweep,3 blade, number of speed 3, 1360 RPM, white,AC 240 volts, 50 Hz, fixed and connecting up complete all as specified and directed.

Material and labour for earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab (M-15)reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete

Sub total

EXTERNAL WATER SUPPLY (Sch 'A' Part-V)

Lump sum price worked out by the Contractor for “(EXTERNAL WATER SUPPLY)” as listed in Schedule ‘A’ Part-V. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,96,560.70 inserted by the MES in Schedule ‘A’ Part-V.

EXTERNAL WATER SUPPLY (Sch 'A' Part-V(A) (MISC))

M&L for construction of brick masonary valves pit of internal dimensions 600mm x 600 mm x 600 mm complete and fabrication of 3.0 mm thick MS Sheet cover and angle iron frame made out of 40mm x 40mm x 6 mm MS angle iron and one side provided with hinge with locking arrangement & duly painted with two coats of black bituminous paint over a coat of red oxide primer including necessary earth work and PCC work complete all as specified and as directed.

Sub total

EXTERNAL ELECTRIFICATION (Sch 'A' PART-VI)

Lump sum price worked out by the Contractor for “(EXTERNAL ELECTRIFICATION)” as listed in Schedule ‘A’ Part-VI. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,29,931.85 inserted by the MES in Schedule ‘A’ Part-VI.

EXTERNAL ELECTRIFICATION (Sch 'A' PART-VI(A) (MISC))

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core conforming to IS 7098 in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified & as directed.

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2.0 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories complete all as specified & as directed. NOTE FOR ITEM NO - 10.01 to 10.02: Necessary earthwork, brick protection etc. shall be measured and paid seperately

S & F energy saving & environment friendly long life 70 W, CT >=5700 K, LED Street light made up of pressure die-cast aluminium housing with acrylic cover as diffuser with IP 66 protection & impact resistance not less than IK-07 complete with integrated type, with high efficiency electronic driver, built-in surge suppressor / SPD of 10 KV or more & high brightness LEDs, luminaire efficacy > 110 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz, including provision of 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord of size 2.5 sqmm for electrical connection from junction box to fittingcomplete all as specified & as directed

S&F polycarbonate junction box IP55/IP65 of size 200mm x 160 x 98 mm comprising of 02 Nos cable terminal, 2 Nos polycarbonate cable gland, 01 Nos DIN rail with provn of 01 No MCB SP 6 Amps, 10 KA breaking capacity, "C" curve and fixed to pole with the help of suitable sized MS clamps including testing complete all as specified & as directed.

supply & fixing cable route indicator using PCC block 1:3:6, Type C2, 40mm graded aggregate of size 900mm x 300mm x 100mm, (45cm burried in ground) and properly painted as per approved colour and wtitten on both sides with red colour paint " MES LT CABLE 1100 VOLTS" in bold lettersincluding necessary earthwork complete all as directed. Note:- The spacing between two consecutive cable roue indicator shall not be more than 50.00 metres and also be provided at each and every bend or corner.

Material and labour for earthing with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to depth not less than 2.25m below the ground level with top edge of earth plate at a depth not less than 1.5m below the ground level connected to galvanized iron wire 4mm dia earth lead by means of bolts & nuts,check nuts & washers made of galvanised steel, earth strip protected by and including PCC (1:2:4) type B1 precast RCC cover slab (M-15) reinforced with 8mm dia TMT bars 100mm center to center bothways including one handle made of 10 mm dia round bar, including necessary excavation and earthwork in any type of soil, 20 mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 2009 and testing on completion complete all as specified and as directed.

Sub total

SEWAGE DISPOSAL (Sch 'A' Part-VII)

Lump sum price worked out by the Contractor for “(SEWAGE DISPOSAL)” as listed in Schedule ‘A’ Part-VII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 1,05,612.57 inserted by the MES in Schedule ‘A’ Part-VII.

SEWAGE DISPOSAL (Sch 'A' Part-VII (A) (MISC))

S & F factory made heavy duty RCC manhole cover slab of size 900mm x 60mm, (internal dimension) including frame conforming to IS complte all as directed.

Sub total

ROAD, PATH & CULVERT (Sch 'A' PART-VIII)

Lump sum price worked out by the Contractor for “(ROAD, PATH & CULVERT )” as listed in Schedule ‘A’ Part-VIII. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,63,256.35 inserted by the MES in Schedule ‘A’ Part-VIII.

ROAD, PATH & CULVERT (Sch 'A' PART-VIII (A) (MISC))

Applying evenly primary/tackcoat with cataonic bitumen(RS-I) @ 3.50 kg/10sqm over WBM complete all as specified and directed.

M&L for Premix bituminous, macadam, with 4% binder content of paving bitumen Gde-VG-30 by weight of total mix, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed.

M&L for paving bituminous premixed aspheltic semi dense concrete 40mm consolidated thickness (minimum) with 5.5% binder content of paving bitumen Gde-VG-30 by weight of total mix, rolled and compacted, mixed in mechanical hot mix plant and pre-mix material laid with mechanical paver, finished including rolling to required gradient and camber with 8 to 12 tonne power roller to required compaction complete all as specified in the relevant clauses of SSR Part-I (2009) complete all as specified and as directed.

M&L for Cleaning, preparing the road surfaces and making good for road marking 2.00mm thick centre line, dashes, arrows, brackets and similar work on road surfaces as per IRC pattern with thermo plastic paint white or golden yeiiow of approved make and mix with 8% mica with special applicator Hot plastic paint mix machine including complete all as specified and directed.

Sub total

AREA DRAINAGE (Sch 'A' Part-IX)

Lump sum price worked out by the Contractor for “(AREA DRAINAGE)” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 86,302.41 inserted by the MES in Schedule ‘A’ Part-IX.

REFRIGERATOR, WATER COOLER,AIR CONDITIONING, HOT WATER SUPPLY (Sch 'A' Part-X)

Lump sum price worked out by the Contractor for “(REFRIGERATOR, WATER COOLER,AIR CONDITIONING, HOT WATER SUPPLY)” as listed in Schedule ‘A’ Part-IX. Representing ** ___ % ______ percent *Above / Below the lump sum price of Rs. 2,538.10 inserted by the MES in Schedule ‘A’ Part-IX.

REFRIGERATOR, WATER COOLER,AIR CONDITIONING, HOT WATER SUPPLY (Sch 'A' Part-X(A)

Supply, install, testing & commissioning of refrigerator, ISI marked, electric driven, single phase having capacity 308 Ltrs or nearest higher size, frost-free smooth flow type, separate chill compartment with plastic shelves, ice maker unit, vegetable/fruit drawer, body colour as approved with suitable lighting arrangement, working with non-CFC refrigerant & 5 star rated including electric connection complete all as specified and as directed.

Supply, install, testing & commissioning of water cooler storage type, ISI marked, 5 star rated, electric driven 230V, 50 Hz, single phase supply with all internal accessories, stainless steel body & tank, power saving PUF insulation, adjustable cold water thermostat, 10 degree to 25 degree centigrade, auto cut-off facility, over-load protection, stainless steel front panel, extended plastic legs, eco-friendly confirming to relevant IS & power factor shall not be less than 0.85 compressor & approx storage capacity of 80 Ltrs & nominal cooling capacity of 40 Ltrs/Hours including electric & water connection complete all as specified and as directed.

Supply, install, testing & commissioning of hi wall, split-type Air Conditioner Unit of capacity 1.5 TR based on Inverter Technology comprising of indl indoor & outdoor units complete with cordless remote control unit & with in-built air ionizer & plasma filter for better indoor air quality with minimum 5 star rated incl electric connection complete all as specified and as directed. NOTE : (i) The Air Conditioner shall be initial filled / charged with refrigerant of specified quantity & the refrigerant to be used shall of Non-CFC type & as per the latest technology. (ii) The cost of additional refrigerant pipes required (if any) is deemed to be included in the unit quoted rates. (iii) Suitable piping of adequate length & size 5/8" for drainage of condensate water from indoor unit shall be provided & the cost of the same is deemed to be included in the unit quoted rates. (iv) Anything missed out in the technical specifications but technically required for efficient working of the AC is deemed to be included in the unit quoted rates.

Supply, install, testing & commissioning of copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut out & time delay & of capacity 0.5KVA incl electric connection complete all as specified and as directed.

Supply, install, testing & commissioning of copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut out & time delay & of capacity 1.0 KVA incl electric connection complete all as specified and as directed.

Supply, install, testing & commissioning of copper wound voltage stabilizer, ISI marked for automatic operation, single phase, naturally air cooled, indoor type & designed for I/P variation between 170 V to 260 V with O/P voltage stabilization at 230 V with accuracy of +/- 2.5%, with high & low voltage cut out & time delay & of capacity 4.0 KVA incl electric connection complete all as specified and as directed.

Supply, installation, testing and commissioning of electric water heater, storage type, BEE 5 star rated, 25 ltr capacity 230 volts AC, 50 Hz comprising of high wattage heating element for instant heating, extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provision of necessary grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/flexible chord complete all as specified and as directed.

Sub total

AKM CONSTRUCTION AND ENGINEERING LLP

M/s KASHMIRA SINGH BARMI AND SONS

UNIVERSAL TRADING