8486/GWL/E8 REPAIR AND MAINTENANCE OF MISC FURNITURE AT MORAR CANTT UNDER GE GWALIOR

Amount

Premium computer operation chair (C-022 & C-023) for the following :- TP :-Taking out unserviceable seat and S&F new seat with 12 mm thick ply wood BWR made to shape of seat, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around.

Taking out unserviceable back and S&F new back with 12 mm thick ply wood BWR made to shape of back, upholstered with Fabric of approved colour and moulded polyurethane foam with PVC lipping all around

Taking out unserviceable base and S&F new 5 star base fitted with twin wheel castors including replacing unserviceable hydrolic system where applicable .

Chair CB (W/o arms) visitors:- Methodex V-34 Taking out unserviceable seat and S&F new seat with 12 m thick ply wood made to shape of seat and shall be upholstered with best quality tapestry cloth of approved quality and colour over moulded polyurethane foam with PVC lipping all around including painting the frame with 1st quality synthetic enamel paint black complete as directed.

Taking out unserviceable back and S&F new back with 12 m thick ply wood made to shape for back and shall be upholstered with best quality tapestry cloth of approved quality and colour over moulded polyurethane foam with PVC lipping all around including painting the frame with 1st quality synthetic enamel paint black complete as directed.

Repair to Form without back for the following :- FD-77(M) Removing of unserviceable top from its existing position and S&F new top with 1st class hard wood plank wrought 25mm thick 300mm width & 1525 mm long duly fixed with nuts and bolts and polished all as directed.

Welding to frames wherever cracked/broken all as directed

Preparation of old painted surface by scrapping and painting with 1st quality synthetic enamel paint black complete all as directed.

Repair to Form with back for the following :- FD-78(M) :- Removing of unserviceable top from its existing position and S&F new top with 1st class hard wood plank wrought 25mm thick 255mm width & 1800 mm long duly fixed with nuts and bolts and polished all as directed.

Removing of unserviceable back from its existing position and S&F new back with 1st class hard wood plank wrought 19mm thick 150mm width & 1800 mm long duly fixed with nuts and bolts and polished all as directed.

Welding to frames wherever cracked/broken all as directed

Preparation of old painted surface by scrapping and painting with 1st quality synthetic enamel paint black complete all as directed.

CHAIR STEEL WITH PLY,TP :- Removing the old broken /userviceable seat from the chair dining TP steel by unscrewing and supply and fixing new seat of same size and specification.The seat shall be made of plywood duly hot compressed and glueed into desired shape and size with thickness not less than 12mm.

Scratching the entire frame of chair and applying one coat of synthetic enamel black paint after preparation of surfaces. Complete all as specified and as directed by Engr-in-Charge

REPAIRS TO BIN SOLIED LINEN (SMALL) : FD-244:- Dismantling, taking out carefully & replacement of old existing broken plywood from side of the Bin of any description, in any position & replacement of the same with S&F new side 6 mm thick plywood one side Teak wood grade. shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item 15 here in before but replacement of TOP plywood with S&F new Top 6 mm Thick plywoodone side teak wood

All as per item 15 here in before but replacement of TOP rail with S&F new TOP rail for seat made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 15 here in before but replacement of bottoms batten frame rail for seat with replacement S&F new bottom and batten rail made out of Ist class hard wood (teak wood)

All as per item 15 here in before but replacement of leg with S&F new leg made out of Ist class hard wood (teakwood) complete all as shown on drawings.

All as per item 15 here in before but replacement of bottom plank with S&F new bottom plane made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 15 here in before but replacement of edging with S&F new edging made of Teakwood (Size 6 x 25 mm) complete as approved and all as shown on drawings.

All as per item 15 here in before but replacement of back ply with S&F new 6 mm thick commercial ply BWR grade complete as shown on drawings.

Supply & fix new stopper screws suitable size Bracket made out of Ist class hard wood (teak wood) of size 25mm x 25mm x 150mm. complete as approved and all as shown on drawings.

Recanning (complete as per drg. of Bin soiled linen with 2mm wide new plastic cane (Make Shah Brand) in Godrej pattern.

Polishing two coats of old and new surfaces of Bin soiled linen after repairs with melamine polish of approved Make including preparation of surfaces.

REPAIRS TO STOOL DRESSING : FD-252, FD-27 ,282: Dismantling, taking out carefully & replacement of old existing broken leg of the stool dressing of sorts of any description, & replacement of the same with S&F new leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item 26 here in before but replacement of long rail with S&F new long rail for seat made out of Ist class hard wood (teakwood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 26 here in before but replacement of short rail for seat with replacement S&F new short rail rail made out of Ist class hard wood (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 26 here in before but replacement of rubber shoe with S & F new hard rubber shoe of superior quality with steel screws of size 20 mm long complete as approved and all as shown on drawings.

Recanning of stool dressing with 2mm wide new plastic cane

Polishing two coats of old and new surfaces of stool dressing after repairs with melamine polish of approved Make including preparation of surfaces.

REPAIRS TO CHAIR WOODEN BOTTOM FD-56, FD-225, FD-285 : Dismantling, taking out carefully old existing plywood from seat & chair wooden bottom without arms & replacement of the same with S&F new plywood both side commercial face BWR grade conforming to IS 303-1975, 6mm thick for seat with holes, made to shape, fixed with 24 Nos steel screws of suitable size fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item 32 here in before but replacement of back leg with S&F new back leg made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 32 here in before but replacement of front leg with S&F new front leg made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 32 here in before but replacement of side rail with S&F new side rail made out of Ist class hard wood (teak wood) complete all as shown on drawing, specified & directed by the Engineer-in-Charge.

All as per item 32 here in before but replacement of front/back rail with S&F new front/back rail made out of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 32 here in before but replacement of wooden back strip with S&F new wooden back strip made out of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 32 here in before but replacement of stiffener with S&F new stiffener of chair wooden bottom without arms made out Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 32 here in before but replacement of rubber shoe with screw with S&F new rubber shoe of superior quality Steel plated screws of suitable size complete as approved and all as shown on drawings.

Provn. Of new angular bracket 08 Nos with steel screws suitable size of Ist class hardwood (teakwood)of size 75 x 75 mm x 25 mm complete as approved and all as shown on drawings.

Polishing two coats to old and new surfaces of chair wooden bottom without arms after repairs with melamine polish of approved Make including preparation of surfaces.

REPAIR TO ALMIRAH WOODEN LARGE OF SORTS (DB-4155) : Removing of existing unservicable shutter and S & F new shutters of 25 mm thick particle board bonded with phenol formaldehyde resin (exterior grade) and having teak face venneered on one side and commercial face on other side with 6 mm thick teak wood beading on three side of shutter all as per shown on drawing and directed by Engineer-in-Charge.

All as per item 42 here in before but Removing of existing unserviceable back and S & F back of 12 mm thick plywood BWP grade commercial type all as specified and directed by Engineer-in-Charge.

Taking out old unserviceable leg and S & F the new leg of teak wood duly plained and finish complete all as specified and directed by Engineer-in-Charge.

Taking out old unserviceable shelve and S & F of new shelve of 25 mm thick particle board BWR grade commercial type with 4 mm teak wood beading on front edge of the shelf fixed with nails over 25 mm x 25 mm MP teak wood beading in almirah all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable MS hinges and S & F of 100 mm long MS ISI marked hinges all as specified and directed Engineer-in-Charge.

Taking down old unserviceable hasp and staples and S & F aluminium anodized hasp & staples 100 mm long with steel screw all as specified and directed Engineer-in-Charge.

Taking down old unserviceable handle and S & F new aluminium 125 mm long handle fixed with steel screw all as specified and directed by Engineer-in-Charge.

Polishing two coats of almirah large wooden with melamine polish to all internal and external surface (except bottom) all as specified and directed by Engineer-in-Charge.

M & L two coats of black bituminous paint to bottom external surface of almirah wooden large including preparation of surface all as specified and directed by Engineer-in-Charge.

REPAIR TO ALMIRAH WOODEN MEDIUM OF SORTS (DB-3595): Removing of existing unserviceable shutter and S & F of new shutters of 25 mm thick particle board bonded with phenol formaldehyde resin exterior grade and having teak face on other side with 6 mm thick teak wood beading on three side of shutters all as specified and directed by Engineer-in-Charge.

All as per item 51 here in before but Removing of existing unserviceable back and S &F of new back of 12 mm thick plywood BWP grade commercial type all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable leg and S & F of new leg of teak wood duly plained and finish complete all as specified and directed by Engineer-in-Charge.

Taking down old unserviceable shelve and S & F of new shelve of 25 mm thick particle board commercial type with 6 mm thick teak wood beading on front edge of the shelf with nails over 25 x 25 mm MP teak wood beading all as specified and directed by Engineer-in-Charge.

Polishing of almirah medium wooden with sprit polish to all internal and external surface (except bottom) all as specified and directed by Engineer-in-Charge.

M & L two coats of black bituminous paint to bottom external surface of almirah wooden medium including preparation of surface all as specified and directed by Engineer-in-Charge.

REPAIR TO TABLE OFFICE OFFICER/CLERK WOODEN DB-4120, DB-4110 : Removing of existing unserviceable table top and S & F of new table top of prelaminated particle board 18/19 mm thick teak finish on one side and other side white exterior grade with 4 mm TW beading all round the table office officer all as specified

Description all as per item No. 57 above but for table office clerk wooden.

All as per item 57 here in before but Replacement of cup board shutter made out of prelaminated particle board 18/19 mm thick teak finish on one side including fixing complete with piano type hinges design and size as shown on drg complete for table office officer/clerk wooden all as specified and directed.

All as per item 57 here in before but Replacement of leg of teak wood size shape design as shown on drg for table office officer/clerk wooden all as specified and directed.

All as per item 57 here in before but Replacement of top long rail made out of teak wood size shape & design as shown on drg for table officer all as specified and directed.

Description all as per item No. 57 above but short rail made out of teak wood size shape & design as shown on drg for table officer all as specified and directed.

Description all as per item No. 57 above but long rails made out of teak wood size shape & design as shown on drg for table office clerk all as specified and directed.

Description all as per item No. 57 above but for short rails made out of teak wood size shape & design as shown on drg for table office clerk all as specified and directed.

Replacement of drawer made of TW timber complete size shaps and design as shown on drg for table office officer/clerk including one No. 35 mm dia aluminium knob in lieu of wooden knob all as directed.

Replacement of 30 mm dia aluminium knob including taking down wooden knob do all as directed.

Replacement of 30-35 mm wide 70-75 mm long safety pattern aluminium hasp & staple all as specified.

Polishing with two coats of melamine polish on old and new surface including preparing old/new surface of table office officer all as specified.

Polishing with two coats of melamine polish on old and new surface including preparing old/new surface of table office clerk wooden all as specified.

REPAIR OF BATH MAT (WOODEN) : FD-254 : Dismantling taking existing batten of bath mat wooden & s & F of new batten made of Ist class teak wood shape & size as per drg and as specified by Engr-in-Charge.

Description all as per item No. 70 but replacement of legs of bath mat with S & F of new legs made of Ist class H. W. teak wood shape & size as per drg and as specified and directed by Engr-in-Charge.

Painting with two coats of synthetic enamel white paint to old and new surface of bath mat wooden over a coat of pink primer as approved by Engr-in-Charge.

REPAIRS TO TABLE 900 MM X 900 MM (3' x 3') (WOODEN) FD-88, FD-291 : Dismantling, taking out carefully& replacement of old existing broken table top of Table 900mm x 900mm of any decription, & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWP, exterior grade of make Novapan/ Eco Board, with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item No. 73 here-in before but replacement of legs of table 900mm x 900mm without drawer S&F new leg made out of Ist class hard wood (teak wood)

All as per item No. 73 here-in before but replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item No. 73 here-in before but replacement of rubber shoe with screw (steel) with S&F new hard rubber shoe of superior quality screws (steel) of suitable size complete as approved and all as shown on drawings.

Polishing two coats to old and new surfaces of table 900mm x 900mm (without drawer) after repairs, with melamine polish of approved Make including preparation of surfaces.

REPAIRS TO TABLE 900 MM X 600 MM OR (3' x 2') (WOODEN) FD-42, FD-55, FD-223 :- Dismantling, taking out carefully& replacement of old existing broken table top of Table 900mm x 600mm of any decription, & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWP, exterior grade of make Novapan/ Eco Board, with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item No. 78 here-in before but replacement of legs of table 900mm x 600mm without drawer S&F new leg made out of Ist class hard wood (teak wood)

All as per item No. 78 here-in before but replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item No.78 here-in before but replacement of rubber shoe with screw (steel) with S&F new hard rubber shoe of superior quality screws (steel) of suitable size complete as approved and all as shown on drawings.

All as per item No. 78 here-in before but replacement rectangutar bracket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm complete as approved and all as shown on drawings.

Polishing two coats to old and new surfaces of table 900mm x 600mm (without drawer) after repairs, with melamine polish of approved Make including preparation of surfaces.

REPAIRS TO TABLE 900 MM X 600 MM W/ Drw (3' x 2') (WOODEN) FD-41, FD-224, 223,283 :- Dismantling, taking out carefully& replacement of old existing broken table top of Table 900mm x 600mm of any decription, & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWP, exterior grade of make Novapan/ Eco Board, with including 8mm thick Ist class teak wood moulded design, beading alround, made to shape, fixed in position all as approved, shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item No. 84 here-in before but replacement of legs of table 900mm x 600mm with drawer S&F new leg made out of Ist class hard wood (teak wood)

All as per item No. 84 here-in before but replacement of table frame's rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item No. 84 here-in before but replacement rectangutar bracket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm complete as approved and all as shown on drawings.

All as per item No. 84 here-in before but replacement of rubber shoe with screw (steel) with S&F new hard rubber shoe of superior quality screws (steel) of suitable size complete as approved and all as shown on drawings.

Polishing two coats to old and new surfaces of table 900mm x 600mm (with drawer) after repairs, with melamine polish of approved Make including preparation of surfaces.

TRESSLE STORE ROOM WOODEN : FD-86 ,41: Removing /taking out carefully existing unserviceable Long rail made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

All as per above but replacing Centre rail made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

All as per above but replacing Short rail made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

All as per above but replacing Leg made out of 1st class hard wood all as shown on drg specified and directed by the Engineer-in-Charge.

M & L for two coats of cerosote oil to new surfaces after cleaning of tressle SR wooden all as directed by the Engineer-in-Charge.

Repairs to Sofa 4 seater with and w/o arms for the following : FD-18 Taking out ragged and soiled upholstery and tensionless spring from sofa with arm,replacing unserviceable wooden framing with new planks and battons of existing sizes and S&F with new copper plated steel springs duly spreaded over cotton and coir, wrapping with new long cloth and upholstered with new tapestry cloth of approved quality and colour (not less then Rs. 300/- per RM) covering,fixing tightening complete all as directed and shown on Drgs.

Taking out ragged and soiled upholstery and tensionless spring from sofa with out arm,replacing unserviceable wooden framing with new planks and battons of existing sizes and S&F with new copper plated steel springs duly spreaded over cotton and coir, wrapping with new long cloth and upholstered with new tapestry cloth of approved quality and colour (not less then Rs. 300/- per RM) covering,fixing tightening complete all as directed and shown on Drgs.

Repairs to Bench Wksp type 'B' for the following :- F-42:- Taking out unserviceable/decayed top plank from its existing position and provision of new top plank 3048 mm long 300 mm wide and 75 mm thick at the same position made of 1st class HW complete all as directed.

Taking out unserviceable/decayed legs from its existing position and provision of new legs of size 100 mm x 100 mm x 835 mm long of 1st class HW complete all as directed.

Taking out unserviceable/decayed long rails from its existing position and provision of new long rails of size 125 mm x 50 mm x 2800 mm long of 1st class complete as directed.

Taking out unserviceable/decayed short rails from its existing position and provision of new short rails of size 125 mm x 50 mm x 965 mm long of 1st class complete as directed.

Preparation of the surface of the Bench Workshop and painting with two coats of synthetic enamel pant over a coat of primer complete as directed.

Repairs to Table 600 x 600 w/o drawer for the following (FD-293) :Taking down decayed top and S&F new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Taking out unserviceable legs and provn of new legs made of well seassoned 1st class HW all as directed.

Taking out unserviceable long rails and provn of new long rails made of well seasoned 1st class HW all as directed.

Taking out unserviceable short rails and provn of new short rails made of well seasoned 1st class HW all as directed.

Taking out unserviceable stiffener and provn of new stiffener made of well seasoned 1st class HW all as directed.

Repairs to Table Office Officer wooden for the following :-DB-4110 Taking down unserviceable decayed top and supply and fixing new top 18mm thick pre-laminated particle board exterior grade with 4mm thick timber beading all around the edging complete all as directed.

Repalcing decayed bottom of drawer with new 6 mm thick ply wood, front side with 18mm thick pre-laminated particle board and all as directed.

Removing broken legs and supply and fixing new legs of 1st class hard wood and all as directed.

REPAIR TO HAT STAND WITH MIRROR FD-233: M & L for replacement of Base made of Pre-laminated Particle board 18/19 mm in requied shape and size including removing of old broken parts all as specified and shown on drg and as directed by Engineer-in-Charge.

Teak wood beading shape & size as per drg.

Mirror 5 mm thick size as per drg Make-Atul/Goden Fish, Swastic.

Brass pegs with screws size and shape as per drg.

Polishing with two coat of melamine polish on old and new surface including preparing old/new surface of Hat stand with mirror.

TV TROLLEY,FD/E6/MAP/04(R) :- Top of book case made out of 19mm thick prelaminated MDF exterior grade of existing colour with all edges covered with 4 mm thick teak wood beading fixed with adhesive and headless nails or with metal corner bracket with screws,as per drg

5.5mm thick plain glass with magnetic catchers.

50mm dia swivel type castors

REPAIR TO BOOK CASE: FD-237/FD-90 : Removing of existing unserviceable shutter and S & F of new shutters of 18 mm thick particle board bonded with phenol formaldehyde resin exterior grade and having teak face on other side with 6 mm thick teak wood beading on three side of shutters all as specified and directed by Engineer-in-Charge.

Removing of existing unserviceable back and S &F of new back of 6 mm thick plywood BWR grade commercial type all as specified and directed by Engineer-in-Charge.

Removing of existing unserviceable leg and S & F of new leg of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.

Removing of existing unserviceable long rail and S & F of new long rail of teak wood duly planned and finish complete all as specified and directed by Engineer-in-Charge.

Removing of existing unserviceable side & partition and S & F side & partition 18 mm thick partical board commercial type with 6 mm thick teakwood beading on front edge of the nails 18 mm teak wood beading all as specified and directed by Engineer-in-Charge.

Removing of existing unserviceable shelve and S & F of new shelve of 18 mm thick particle board commercial type with 6 mm thick teak wood beading on front edge of the shelf with nails over 25 x 25 mm MP teak wood beading all as specified and directed by Engineer-in-Charge.

Removing of existing unserviceable MS hinges and S & F of Piano type ISI marked hinges all as specified and directed Engineer-in-Charge.

Removing of existing unserviceable top & bottom and S & F top & bottom prelaminated partical board all as specified and directed Engineer-in-Charge.

Removing of existing unserviceable knob and S & F new Brass knob fixed with steel screw all as specified and directed by Engineer-in-Charge.

Polishing of Book case wooden with sprit polish to all internal and external surface (except bottom) all as specified and directed by Engineer-in-Charge.

Repairs to Locker bed side for the following :- FD-54/222 Removing of old unserviceable doors from locker bed and provision of new 18 mm thick pre-laminated particle board with 20 mm thick timber beading all around including necessary fittings such as MS butt hinges 75mm long ,bow handle aluminum 100 mm long, hasp staple 100mm all as directed.

Replacement of sides with new 6mm thick plywood BWR and painting with synthetic enamel paint externally and internally of existing colour over a coat of primer complete all as directed.

Replacement of back ply with new 6mm thick plywood BWR and painting with synthetic enamel paint externally and internally of existing colour over a coat of primer complete all as directed.

Taking down decayed top and supply & fixing with new top 18 mm thick pre-laminated particle board exterior grade ISI mark with 4mm thick timber beading all around the edging complete all as directed.

Taking down decayed bottom and supply & fixing with 18 mm thick plywood BWR and painting with synthetic enamel paint externally and internally of existing colour over a coat of primer complete all as directed.

Preparation of all exposed surface of the locker and painting with synthetic enamel pant grey colour complete all as directed.

REPAIRS TO SOFA SET OF SORTS : FD-18, 234,258 FD-281, 373 : Dismantling, taking out carefully & replacement of old existing broken back leg of the Sofa single/three seater of sorts of any description, in any position & replacement of the same with S&F new back leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item 134 here in before but replacement of front leg with S&F new front leg made out of Ist class hard wood (teak wood). For sofa single/three seater.

All as per item 134 here in before but replacement of side rail with S&F new side rail for seat made out of Ist class hard wood (teak wood) for Sofa single / three seater.

All as per item 134 here in before but replacement of front & back rail for seat with S&F new front & back rail made out of Ist class hard wood (teak wood) for Sofa single seater.

All as per item 134 here in before but replacement of side rail for back frame with S&F new side rails for back frames made out of Ist class hard wood (teak wood) for Sofa single seater.

All as per item 134 here in before but replacement of top and bottom rail for back frame with S&F new top and bottom rail made out of Ist class hard wood (teak wood) for Sofa single seater.

All as per item 134 here in before but replacement of front support rail with S&F new support rail made out of Ist class hard wood (teak wood) for Sofa single seater complete all as shown on drawings.

All as per item 134 here in before but replacement of Arm rest with S&F new Arm rest made out of Ist class hard wood (teak wood) for Sofa single seater / three seater complete all as shown on drawings.

All as per item 134 here in before but replacement of Batten with S&F new Batten made out of Ist class hard wood (teak wood) for Sofa single seater / three seater.

All as per item 134 here in before but replacement of front/ back rail with S&F new front / back rail for seat made out of Ist class hard wood (teak wood) for Sofa three seater.

All as per item 134 here in before but replacement of Top & Bottom rail for back frame replacement S&F new Top & Bottom rail made out of Ist class hard wood (teak wood) for Sofa three seater.

All as per item 134 here in before but replacement of front support rail with replacement S&F new front support rail frames made out of Ist class hard wood (teak wood) for Sofa three seater.

All as per item 134 here in before but replacement of Bearers for seat / or for back frame with S&F new Bearers for seat / or made out of Ist class hard wood (teak wood) for Sofa three seater.

Removing existing cushion any type & in any position from Sofa single / three seater and as herein before but replacement of cushion covered with best quality tapestry cloth of not less than Rs 400 per meters and S&F new foam cushion 95 / 100 mm thick of density 32 conforming to IS 1741 including S&F new long cloth & tapestry cloth for seat make sleepwell, Coirfoam, Alfa foam. Approved by Eng-in-Charge.

Removing existing cushion any type & in any position from Sofa single / three seater and as herein before but replacement of back cushion covered with best quality tapestry cloth of not less than Rs 400 per meters and S&F new foam cushion 95 / 100 mm thick of density 32 conforming to IS 1741 including S&F new long cloth & tapestry cloth for seat make sleepwell, Coirfoam, Alfa foam. Approved by Eng-in-Charge.

Polishing two coats to old and new surfaces of Sofa three seater after repairs with melamine polish of approved Make including preparation of surfaces.

Polishing two coats to old and new surfaces of Sofa single seater after repairs with melamine polish of approved Make including preparation of surfaces.

Repairs to Sofa single seater with cushion (FD/MAP-II/02) Taking out unserviceable rear legs and provn of new rear legs made of 1st class HW and all as directed.

Taking out unserviceable front legs and provn of new front legs made of 1st class HW and all as directed.

Taking out unserviceable rails and provn of new rails made of 1st class HW and all as directed.

Taking out unserviceable seat frame and provn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR and polishing the wooden portion with melamine polish complete all as directed.

Taking out unserviceable back frame and provn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12mm thick plywood BWR and polishing the wooden portion with melamine polish complete all as directed.

Taking out unserviceable arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 400/- per RM) duly wraped with long cloth of existing pattern and as directed.

Repairs to Sofa 3 seater with cushion (FD/MAP-II/02):- Taking out unserviceable rear legs and provn of new rear legs made of 1st class HW and all as directed.

Taking out unserviceable front legs and provn of new front legs made of 1st class HW and all as directed.

Taking out unserviceable long rails and provn of new long rails made of 1st class HW and all as directed.

Taking out unserviceable short rails and provn of new short rails made of 1st class HW and all as directed.

Taking out unserviceable seat frame and provn of new seat frame made of 1st class HW including the horizontal unserviceable wooden battens duly fixed with 12 mm thick plywood BWR and polishing with melamine polish complete all as directed.

Taking out unserviceable back frame for 3 seaters and provn of new back frame made of 1st class HW including the horizontal unserviceable wooden battens duly fixed with 12 mm thick plywood BWR and polishing with melamine polish complete all as directed.

Taking out unserviceable arm and provn of new arm made of 1st class HW all as directed.

Removing u/s cushion and provn of new cushion made of 100 mm thick 'U' foam, 32 density,ISI marked of size 530mmx560mm and covered with best quality tapestry cloth of approved quality and colour (not less than Rs. 400/- per RM) duly wraped with long cloth of existing pattern and as directed.

REPAIR TO SIDE BOARD : FD-26, FD-241, FD-371: Dismantling, taking out carefully & replacement of old existing top of any description & and replacement of the same with S&F new top 18mm Pre-laminated particle board exterior Grade BWR Grade, Make NOVOPAN, BHUTAN BOARDS, KITPLY with teak wood edging and suitable screws, shape & size all as per shown on Drg all as specified and directed by the Engr-in-Charge complete material and labours.

All as per item 166 here in before but replacement of bottom & S & F new bottom

All as per item 166 here in before but replacement of side & S & F new side

All as per item 166 here in before but replacement of shelf with S & F new shelve of 12mm thick in particle board Exterior Grade BWP Grade, ply one side teak finished.

All as per item 166 here in before but replacement of partition

All as per item 166 here in before but replacement of back ply with S & F new 6mm thick plywood commercial both side Grade I (with BWP Resin).

All as per item 166 here in before but replacement of Bottom long Stiffner with S & F new M.P. Teak Wood Stiffner

All as per item 166 here in before but replacement of Bottom short Stiffner with S & F new M.P. Teak Wood Stiffner

All as per item 166 here in before but replacement of Legs with S & F new M.P. T eak Wood Legs

All as per item 166 here in before but replacement of knobs with S & F new 25 mm dia brass finish.

All as per item 166 here in before but replacement of locks with S & F new locks brass godrej make

All as per item 166 here in before but replacement of Piano type hinges with S & F new Piano type hinges light weight

Polising two coats to old and new surface of side board after reparing with melamine polish of approved make including prepration of surfaces.

REPAIR TO TABLE DRESSING LADIES : FD-251/ FD-232/ 32 ,FD-378 : Dismantling, taking out carefully old existing broken top of table dressing ladies of any description & replacement of the same with S&F new top table dressing ladies of 18 mm thick pre-laminated particle board exterior grade, BWP (Natural teak wood shade), made to shape, fixed in position, all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of side of table dressing ladies with S&F new side of table dressing ladies with teak wood veneered one side & commercial on other side. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of slide glass shutter with aluminum channel, 5.5 thick, 550mm x 380mm with groves for sliding rest all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of bottom commercial ply with teak (veneered one side) commercial other side) with S&F new bottom commercial ply with teak veneered one side (commercial other side). All as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of mirror 366mm x 1220 x 5.5 mm thick with S&F new mirror 366mm x 1220mm x 5.5mm. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of back frame with S&F new back frame of 6 mm commercial ply wood back member made out of 45mm x 40mm teak wood. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of chromium plated knob 25mm dia 24mm length with S&F new chromium plated knob 25mm dia, 24mm length of best quality as approved. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of drawer of table dressing ladies with S&F new drawer as per Drg and approved. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 180 here in before but replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for table dressing ladies. all as specified & directed by Engineer-in-Charge.

REPAIRS TO TABLE DRESSING GENTS : FD-230/ FD-31 : Dismantling, taking out carefully and replacement of old existing broken top of table dressing gents of any description & replacement of the same with S&F new top table of 18mm thick prelaminated particle board one side teak face laminated & other side white balancing, exterior grade, BWP with and including 6mm thick teak wood beading alround made to shape, fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 192 here in before but Replacement of side with S&F new side of 12mm thick particle board, one side teak veneered and other side commercial, exterior grade, BWR with and including 6mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 192 here in before but Replacement of bottom with S&F new 12mm thick ply, teak veneered on one side and commercial on other side grade I with (BWR Resin) made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 192 here in before but Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick (Make : Atul, Swastic, Golden fish) made to shape all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 192 here in before but Replacement of back frame with S&F new back frame made out of 45mm x 40mm teak wood members & 6mm thick commercial ply grade BWR type BB, made to shape all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 192 here in before but Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.

All as per item 192 here in before but Replacement of drawer with S&F new drawer made to shape all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for table dressing gents complete all as specified & directed by Engineer-in-Charge.

REPAIRS TO TABLE WRITING : FD-249, FD-88, FD-275, FD-33 : Dismantling, taking out carefully & replacement of old existing broken table top of Table writing of any description & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWR, exterior grade of including 6mm thick teak wood beading alround, made to shape, fixed in position all as approved, shown on drawing, specified, and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of shutters (complete) with S & F 18 mm thick particale board one side teak face wood grade. complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of TOP long rails with S&F new TOP long rail made out of Ist class Hard Wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of TOP short rail with S&F new TOP short rail of made out of Ist class Hard Wood (teak wood) complete as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of drawer with knob brass finished 40mm dia with S&F complete new drawer made out of Ist class hardwood (teak wood) with knob brass finished 40mm dia as approved by GE complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of Leg with S&F new Leg with made made out Ist class m.p. (teak wood) complete all as shown on drawings, and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of bottom centre stiffener with S&F new bottom centre stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of bottom side stiffener with S&F new bottom side stiffener made out of Ist class Hard Wood (teak wood) complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 200 here in before but replacement of cup board shutters made out one side teak vennered particale board 18 mm thick including pipe complete type hinges design and size as per shown on drawing complete table writing.

All as per item 200 here in before but replacement of rubber shoe with screw(steel) with S&F new rubber shoe of superior qulaity screws (steel) of suitable size complete as approved and all as shown on drawings.

Polishing two coats to old and new surfaces of table writing after repairs with melamine polish of approved Make including preparation of surfaces.

M/s Bansal Brothers and Co.

M/S MUKESH AGARWAL

M/s Manish Contractor