Tender ID

Karnataka

Retender

Works

Electrical

HT TO LT CONVERSION, INSTALLATION OF SEPERATE METERS WITH RR NUMBER FOR STAFF QUARTERS & OTHER ELECTRICAL REPAIR WORKS AT ST MDRS COMPLEX AT REDDYKATTE, KORATAGERE TQ, TUMKUR DIST

Karnataka Residential Educational Institutions Society

KREIS Assistant Executive Engineer Section Bengaluru | Karnataka

Amount: ₹10.3 LCloses: 14 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published31 May 2024
Closed14 Jun 2024
Retendered8 Oct 2026

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 31 May 2024

Tender Value

₹10.3 L

EMD Value

₹13,000

Closing Date

14 Jun 2024, 5:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Residential Educational Institutions Society

Contact Person

S K Mahadeva

Office Number

Mobile Number

Work Description

HT TO LT CONVERSION, INSTALLATION OF SEPERATE METERS WITH RR NUMBER FOR STAFF QUARTERS & OTHER ELECTRICAL REPAIR WORKS AT ST MDRS COMPLEX AT REDDYKATTE, KORATAGERE TQ, TUMKUR DIST

Tender Information

Tender ID

KREIS/2024-25/EL/WORK_INDENT199

Reference Number

KREIS/2024-25/EL/WORK_INDENT199

Tender Type

Reserved

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

KREIS Assistant Executive Engineer Section Bengaluru

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredThe Tenderer shall have valid class-II AND ABOVE ELECTRICAL LICENSE ISSUED BY CHIEF ELECTRICAL INSPECTORATE OF GOVT

RequiredAnnual turnover for the last 5 years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24.Certificate by CA with UDIN number.

RequiredAchieved in at least one financial years a minimum financial turnover in all classes of Electrical works of Rs.10.34 Lakhs.

RequiredSatisfactorily completed as prime contractor, atleast one any nature of work such as Electrical work of value not less than Rs 2.58 Lakhs.

RequiredThe Tenderer shall give details of the works on hand. Present contract commitment.

RequiredBidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste as prescribed in the tender document..

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

List of works for which tenders already submitted

The employer is not responsible for any technical hiccups or delay in accessing E - Procurement Portal.

Other taxes will be deducted as per prevailing Govt orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All scanned documents to be uploaded shall be in original. All the original documents to be submitted for verification at the time of technical bid opening or next day. And the Executive Director reserves the right to varify the original documents before approval.

If any, additional information required, the same may be obtained from the office of the Executive Director, 8, M S B-1, 6th & 7th Floor, Cunningham Road, Bangalore-52 during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday , the next working day will be considered.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The contractors assessed available tender capacity shall be more than the tender value. It will be calculated as per the Standard tender document Attached.

The Tender processing fee shall not be refundable.

Contractor should take all precautions to ensure that no damage is caused to the existing similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

If the Successful Bidder has quoted lesser rates than the estimated rates then he should without fail remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected.

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted) should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

All the items of work as Maintained in the Bill of Quantity (BOQ) are including lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all machinery and equipment required for successful completion of work etc., complete. The work shall be executed as per standard technical specification and directions of Engineer in charge of the work

Terms and condition of Contract are as per Approved STD KW-1

The defect liability period is 12 months from the date of the completion of the work.

The rates quoted are to be inclusive of GST. GST will not be paid to the tendered amount separately by KREIS. In the extended period of contract, GST will not be paid by KREIS and is to be paid by the contractor himself.

All statutory charges like Electrical deposit, Electrical Inspectorate charges shall be paid by the Contractor and complete the work. The same will be re-imbursed by KREIS after submission of paid receipts.

List of existing commitments and ongoing work

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹13,000

Important Dates

Last Activity

8 Oct 2026

Published

31 May 2024

Download Ends

7 Jun 2024

BOQ Preview

•

MATERIAL - HT TO LT CONVERSION WORKS

•

LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval (Excluding Meter Cost & Modem Cost) CT ratio: 75/1 A as per drawing No: BESCOM/GM/QS&...

•

CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port BIDIRECTIONAL (Used for Boundary Metering) ---- Including all lead and lift charges, loading a...

•

GSM modem with connecting cable for remote communicating capabilities ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of a...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 - 150 Sq...

•

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 - 95 Sqmm, (54 GI Wires - 2.5 mm Dia)...

•

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable- 3Cx95Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charge...

•

PVC pipe - OD 75mm and 6 Kg/sqcm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments r...

•

Pole Mounted Fibre Glass Reinforced Aerial Fuse Board 60 Amps - 3 Way (Dwg No. BESCOM/GM/QS&S/24 Dtd 24.11.2018) ---- Including all lead and lift charges, loading and unloading charges, labour charges...

•

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LT UG Cable Up to 4C x 50 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hir...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20 A single phase Class-1 Accuracy with Temper Proof Energy Meter. - Staff Quarters ---- Including all lead and lift charges, loading...

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.5...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5to32/ 63A three phase 4 wire whole current class-1Accuracy Energy Meter. For Borewell ---- Including all lead and lift charges, loading a...

•

Supplying & Fixing Chemical earthling for grounding. Conduits, ICcut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior F...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Fixing a shunt capacitor of ...kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor.6 to 10 kVAR ---- Including all lead...

•

MATERIAL - ACADEMIC BLOCK

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch ---- Including all lead and lift charges, loading and unloa...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A Three Way socket ---- Including all lead and lift charges, loading and unl...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module ---- Including all lead and lift charges, lo...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws. ---- Including all lead and lift charges, lo...

•

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V upto 30mA sensitivity on existing wood/panel board.32-40 A 4 pole ---- Including all lead and lift charges, loadin...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying & fixing retrofit type-PL- LED Lamp ...... W LED linear source with CCT 6500 degree K, CRI GREATER THAN 70%. efficacy GREATER THAN 80 lumen per W, life GREATER THAN 25000 burning hours and C...

•

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI GREATER THAN 80. Power Input: 220-240V@ ...

•

MATERIAL - Boys Dormitory

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch ---- Including all lead and lift charges, loading and unloading...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket ---- Including all lead and lift charges, loading and...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.- 6A Lamp Holder ---- Including all lead and lift charges, loading and unloading charges, labour charges, all...

•

MATERIAL - Girls Dormitory

•

MATERIAL - Kitchen and Dining

•

MATERIAL - Street Light

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket 1x40/2x40 W fluorescent tube street light fitting of all capacities to GI...

•

Labour/Erection/Dismantling charges and Testing & Commissioning Charges

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable - 120 to 240 Sqmm - From LT Box to Pole ---- Includi...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - HT Cable - 3x95 to 150 Sqmm - From DP to Metering cubicle ---...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable - 2.5 to 25 Sqmm - - For Each Block from the neares...

•

Fixing PVC pipe for taking the leads form the conductor to the Pole fuse board (including taking the lead wire inside the PVC pipe & giving connection to the overhead line & Pole fuse box/Aerial fuse ...

•

Cable Joint and wiring (for HT & LT UG Cable) 3x95 to 3x150 Sqmm - For Two ends of HT cable ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental cha...

•

Fixing of GPRS Modems with Accessories - For Substation ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and ma...

•

Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC - 100 kVA TC - For Substation ---- Including all lead and lift charges, loading and unloading char...

•

Erection of LT metering Cubicle on Platform. - For Substation ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men ...

•

Fixingchargesofposttop/Gate/Gardenfitting/LEDontheexistingCI/GIoranyotherpipeusingrequiredsizeofreducer,wiringusing suitable wires. ---- Including all lead and lift charges, loading and unloading char...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Civil Engineering Works

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1-reddykatte.doc

Tender Document • 0.88 MB

Drawings upload.pdf

Others - Drawings • 0.98 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Electrical

HT TO LT CONVERSION, INSTALLATION OF SEPERATE METERS WITH RR NUMBER FOR STAFF QUARTERS & OTHER ELECTRICAL REPAIR WORKS AT ST MDRS COMPLEX AT REDDYKATTE, KORATAGERE TQ, TUMKUR DIST

Karnataka Residential Educational Institutions Society

KREIS Assistant Executive Engineer Section Bengaluru | Karnataka

Amount: ₹10.3 LCloses: 14 Jun 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published31 May 2024
Closed14 Jun 2024
Retendered8 Oct 2026

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 31 May 2024

Tender Value

₹10.3 L

EMD Value

₹13,000

Closing Date

14 Jun 2024, 5:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Residential Educational Institutions Society

Contact Person

S K Mahadeva

Office Number

Mobile Number

Work Description

HT TO LT CONVERSION, INSTALLATION OF SEPERATE METERS WITH RR NUMBER FOR STAFF QUARTERS & OTHER ELECTRICAL REPAIR WORKS AT ST MDRS COMPLEX AT REDDYKATTE, KORATAGERE TQ, TUMKUR DIST

Tender Information

Tender ID

KREIS/2024-25/EL/WORK_INDENT199

Reference Number

KREIS/2024-25/EL/WORK_INDENT199

Tender Type

Reserved

Product Category

Electrical

Form of Contract

Electronic Documents, First(One Cover)

Location

KREIS Assistant Executive Engineer Section Bengaluru

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredThe Tenderer shall have valid class-II AND ABOVE ELECTRICAL LICENSE ISSUED BY CHIEF ELECTRICAL INSPECTORATE OF GOVT

RequiredAnnual turnover for the last 5 years i.e. 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24.Certificate by CA with UDIN number.

RequiredAchieved in at least one financial years a minimum financial turnover in all classes of Electrical works of Rs.10.34 Lakhs.

RequiredSatisfactorily completed as prime contractor, atleast one any nature of work such as Electrical work of value not less than Rs 2.58 Lakhs.

RequiredThe Tenderer shall give details of the works on hand. Present contract commitment.

RequiredBidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste as prescribed in the tender document..

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

List of works for which tenders already submitted

The employer is not responsible for any technical hiccups or delay in accessing E - Procurement Portal.

Other taxes will be deducted as per prevailing Govt orders.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The contractors assessed available tender capacity shall be more than the tender value. It will be calculated as per the Standard tender document Attached.

The Tender processing fee shall not be refundable.

Terms and condition of Contract are as per Approved STD KW-1

The defect liability period is 12 months from the date of the completion of the work.

List of existing commitments and ongoing work

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹13,000

Important Dates

Last Activity

8 Oct 2026

Published

31 May 2024

Download Ends

7 Jun 2024

BOQ Preview

•

MATERIAL - HT TO LT CONVERSION WORKS

•

MATERIAL - ACADEMIC BLOCK

•

MATERIAL - Boys Dormitory

•

MATERIAL - Girls Dormitory

•

MATERIAL - Kitchen and Dining

•

MATERIAL - Street Light

•

Labour/Erection/Dismantling charges and Testing & Commissioning Charges

•

Civil Engineering Works

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw1-reddykatte.doc

Tender Document • 0.88 MB

Drawings upload.pdf

Others - Drawings • 0.98 MB

Ready to Participate?

Download all tender documents and submit your bid