REPAIRS TO HARD STANDING COMPOUND WALL FENCING ARAE DRAINS FOOTPATH ETC OF MH AND RH AREA UNDER GE MH AND RH KIRKEE

Amount

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed

Dismantling structural steel work including doors, gates but excluding framed truss etc all as specified and directed

Dismantling fencing wire mesh any type all as specified and directed

Dismantling posts of any type (wood, steel or RCC) any section embedded in concrete including taking out embedded portion and making good disturbed ground all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated , etc) sheets in roof covering all as specified and directed.

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

Excavating in post holes (or similar Holes) each not exc 0.5 Cum , getting out in hard/dense soil, returning , filling in and ramming earth in layers not exc 25 Cum thick , watering and removing surplus soil to a distance not exc 50m and making good surface all as specified and directed.

M&L for PCC 1:4:8 , type D2 (40mm graded aggregate) as in sub base of floor/pavement, 75mm thick all as specified and directed

M&L for machine pressed, glossy finish, precast interlocking paver block with grey cement and pigment , factory made any shape and size confirming to IS 15658-2006 of 60mm thickness , made out of M-35 grade concrete over and including 20mm thick crushed stone sand cushioning all as directed

M&L for prepolished glossy type Chequered cement concrete coloured tiles 30cmX 30cm x 25mm thick, in various colour machine pressed , set jointed and pointed in neat cement slurry in floors and cut and polished with coloured cement and pigments laid over 15mm thick screed bed in CM (1:6) all as specified and directed

M&L for Granite slab of approved colour /design , 18-20 mm thick machine cut, on horizontal platform or in skirting/dado etc laid over 10mm thick cement screed/backing coat in CM (1:3) position and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polishing complete including dismantling of existing slab and removing from site all as specified and directed

M&L for Pre-cast cement concrete block masonry with solid blocks, type B1 (1:2:4) 20m graded aggregate exc. 10 cm in width and setting in CM (1:6) , complete all as specified and directed

Providing cement concrete 1:3:6 type C1 as in fdn of posts, copings, filleting etc all as specified and directed

Supply only GI Chain link fencing any size and or type complete fitted on angle iron post -struts and tightened with bolts complete all as specified and directed

Fixing only chain link fencing including line wires , any mesh , size and type to any type of standards , rails , straining bolts , etc including provision of binding wire complete all as specified and directed

S&F MS angle iron in fencing posts & struts including cutting tops to shape as directed , drilling holes , notching for wire etc, flat iron fillets ( for securing wire mesh etc) including all necessary , drilling , bolting or riveting etc and similar work confirming to Fe-410-0 or Fe-310-0 , all as specified and directed

S&F bands , straps , stay hooks, pintle hinges for gates & similar articles confirming to Fe-410-0 or Fe-310-0 all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plate , rails , braces etc complete drill for fixing steel sheeting or other covering etc including necessary welding , riveting , nut bolting etc all complete confirming to Gde Fe-410-S , all as specified and directed

S&F mild steel , plain black sheet in steel gates etc cut to size holes punched , including screws , clout nails , rivets & welding etc all complete (thickness of sheet 1.60mm ) all as specified and directed

M&L for preparing new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat or red oxide primer all as specified and directed

S&F 10mm dia MS round bars for tightening of chain link fencing woven through chain link and fitted completely all as specified and directed

Running welding in repairs of metal thickness to be welded n.exc 6mm all as specified and directed

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) as in wire entanglements aprons, barriers, gates etc including restraining , resecuring and making good to staples all as specified and directed.

M&L two coats of synthetic enamel paint on old steel surfaces of any description exc 10cm width or girth including preparation of old surfaces all as specified and directed

Taking down cement or cement lime plaster on brick or stone walls, ceiling etc raking out joints , hacking for key , scrubbing down with water etc, all as specified and directed .

M& L for rendering of external surface 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finishsed even and smooth (without using extra cement ) and using WPC all as specified and directed (Note - WPC will be paid separately)

M&L preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as specified and directed

M&L for applying two coats of cement base paint over a coat of primer on walls including washing , rubbing down and scrapping of old surfaces all as specified and directed

M&L 75 mm thick, PCC 1:3:6 type C-2 , using 40mm graded stone aggregate as in plinth protection all as specified and directed

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor including finishing for concrete surface even and smooth using extra cement all as spfd and directed

M&L 100mm thick PCC 1:2:4 type B1 using 40mm graded stone aggregate as in floor including finishing for concrete surface even and smooth using extra cement all as spfd and directed

M&L for finishing the concrete surfaces by brooming all as spfd and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161-1998 grade St-240 all as specified and directed

S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified and directed

S&F in repairs taking down of steel doors of garrage exc 4 and n.exc 6 Sqm in each and making good of damaged pintel hinges steel handles by necessary welding and refixing in the same opening after applying one coat of synthetic enamel paint all as specified and directed.

S&F 15mm dia of shank Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut , n. exc 5cm long complete all as specified and directed.

Dismantling steel rolling shutter including assembly exceeding 4 Sqm but not exceeding 12 Sqm and repair for proper functioning and re-erecting the shutter after straightening , cutting, welding of shutter and frame support channels / angles etc, channels and applying greasing, oiling for smooth and easy movement of the shutter and making good the old surface by applying two coats of synthetic enamel paint of matching colour/shade, etc complete all as specified and directed.

All as per item No 38 above but for replacement of roller assembly

All as per item No 38 above but for replacement of springs

Aishwarya Constructions

S.R.M.K Enterprises

L.K.R.TIWARI CONSTRUCTION

JP ENTERPRISES

V.R.PRAJAPATI AND CO.

Shri Sant Cosntruction

Narendra N Bhandare