Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.6 LAccepted-AOC | L-1 | Accepted-AOC AS per Recommendation of TC and Approval of Competent Authotity | |
| 2 | L-2₹16.1 Cr+₹15.9 Cr (10225.5%)Rejected-Finance AT BACHRA DST CHATRA JHARKHNAD 829201 | CHATRA | JHARKHAND | 829201 | L-2 | Rejected-Finance As per recommendation of TC and Approval of Competent Authoitity | |
| 3 | L-3₹16.1 L+₹55,769.16 (3.58%)Rejected-Finance ARA P O GANESHPUR DIST LATEHAR PIN 829202 | LATEHAR | JHARKHAND | 829202 | L-3 | Rejected-Finance As per recommendation of TC and Approval of Competent Authoitity |
Tender Value
₹14.2 L
EMD Value
₹17,800
Closing Date
31 Jan 2023, 5:00 pmClosed
Staff Officer (EnM),M-S Area
Office of the General Manager M-S Area,Bachra.829201
Work of repairing of existing overhead line and commissioning of new overhead line in continuation of the existing overhead line from 6 number barrier junction to diversion point ahead of WB 12 near pond under Magadh OCP, M-S Area.
2023_CCL_268646_1
GM(M-S)/SO(EnM)/e-NIT/22-23/64
Open Tender
Electrical and Maintenance Works
Item Rate
15 days
Office of the Project Officer M-S Area, Bachra
Please Refer NIT
4 documents required · 4 mandatory
₹17,800
9 Jun 2023
21 Jan 2023
1 Feb 2023
23 Jan 2023
31 Jan 2023
23 Jan 2023
23 Jan 2023 - 28 Jan 2023
Amount
Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.
Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .
Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required
Erection of angle Iron/channel iron cross arm on wood/RCC/PCC/steel tubular or Rail pole for 2 wire system.
Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .
Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required
Supplying and erection of stay set complete (galvanised) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required.
315 amps. TPN, one way, tap off box with TPN disconnector
100 amps. TPN, one way, tap off box with TPN disconnector FSU and ISI marked HRC fuses for rising mains
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire
Supply of 6 SWG G.I wire
Erection of G.I wire no-6/8 SWG including binding etc.as required
Erection of Lt spacer
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work
Total impact of GST for the purpose of CTC
M/S SHIV CONSTRUCTION
M/S T K ENTERPRISES
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_277926.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .