PROVN OF BATHROOM CUM TOILET BLOCK FOR JCOs AT CAMP AREA OF CPG, ADDN ALTN TO OFFICES OF AIR CMDE (P AND C) COORD AND PLANNING SECTION AT DGNCC CAMP AND PROVN OF TILES AND CONNECTED WORKS AT P-42 01 AT URBAN VILLAGE UNDER GE (EAST) DELHI CANTT-10

Amount

M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.

Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.

Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.

M & L for Hard core of gauge exc 63mm but not exc 100mm deposited spread and leveling in layers n exc 15cm thick watred and raming to a true surface complete all as specified and directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base complete all as specified and as directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and similar work; vertical or to batter complete.

M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square or rectangular rough finished surfaces of concrete laid flat complete all as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.

M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item 13 but 8mm dia and over upto and including 8mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in footings, plinth beam and bases of columns complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in beams,lintle/plinth bands cantilevers, bressumers, lintel over 1.5m clear span supported on walls complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in columns , piers posts and struts complete all as specified and as directed.

M & L for RCC M25 Design Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed.

M & L for brick work in CM 1:6 using Sub class "B" bricks straight or curved on plan exc. 6mmean radius complete all as specified and as directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and fair without using extra cement in any position incl scafolding etc, complete all as specified.

M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair without using extra cement in any position incl scafolding etc, complete all as specified.

M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and fair without using extra cement including complete all as specified and as directed.

M & L for Preparation of newly plastered internal surfaces of walls/ceilings and applying 1mm thick of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applying Two coats of Oil Bound Distemper over a coat of wall interior primer, complete all as specified and as directed.

M & L for Preparation of newly plastered external surfaces of walls upto 4 storied buildings and applying 1mm thick of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over a coat of external wall primer, complete all as specified and as directed.

S & F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected.

S & F 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed

S & F Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent in Cera/Parryware).

S & F Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture, complete all as specified and as directed.

S & F Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.

S & F Brass chromium plated wall mixture 3 in 1 system including set of hand shower and overhead shower with shower arm and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls,complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. CON-281KN, Jaquar-Cat No. COP-281PM Kohler-Cat No. K-98754IN-4-CP.

S & F Angle valve of CP any colour high pressure screwed for iron pipe and fixed, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)

S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make : Jaquar/Marc/Kohler)

S & F Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S & F 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.

S & F 100mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S & F 100mm dia Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S & F 100mm dia cast iron cowls complete all as specified and as directed.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends any radius complete

S & F PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.

S & F Stainless steel Grating dome 125mm dia with or without hole for waste pipe, complete all as specified and as directed.

S & F 15mm dia GI tubbing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scafolding, cutting chases in wall where ever required etc complete, all as specified.

S & F 20mm dia GI tubbing medium grade with all fitting and fixed to wall and ceiling or laid in floors etc incl scafolding, cutting chases in wall where ever required etc complete, all as specified.

S & F 1000 ltr capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia brass float valve complete all as specified.

S & F for Wall mounted multiple function Shower Panel including all acessories and fittings, complete all as specified and as directed. Make : Hindware Cat Part No. 511686 (size 1650mm x 150mm x 550mm)/Jaquar Cat Part No. JPL-SSF-ST88148B(size 1600mm x 200mm) or JPL-WHT-TMCURVENEO (size1500mm x 230mm) or eqivanlent in Cera/Somany

S & F for 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as directed.

M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 15 mm thick rendering in CM 1:4 complete all as directed.

M & L for 18/20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick rendering in CM 1:4 including rounding to edge complete.

Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP/SIKA/FOSROC. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front and back Face (wooden finish pattern), supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete all as specified and as directed.

S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S & F Mild steel, plain, black sheet 1.60mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

S & F 300mm long Mild steel sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections complete.

S & F 125mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S & F 100mm size stainless steel butt hinges to PVC frames with reqd nos of screws complete all as specified and as directed.

S & F Aluminum Anodised 150mm size barrel tower bolt with complete all as specified and as directed.

S & F 150mm size aluminum adodised handles complete all as specified and as directed.

S & F 150mm size Mild steel oval shape handles complete all as specified and as directed.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for applying two coats of synthetic enamel paint, any tint on New plastered surfaces or brick, stone, concrete, asbestos cement or plastered surface exceeding 10cm width or girth including preparation of surfaces and including 2-3mm wall care putty over a coat of primer complete.

S & F Collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete.

M & L for Rolled sections as in roof trusses (framed), trussed purlins, rafters, standing poles, crane gantries, rails and fastenings and heavy brackets framing including distance pieces, cleats etc., conforming to Fe-410W Gde E- 250 quality A complete all as specified and as directed.

S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 45mm thick set in CM (1:4) (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid seperately) complete all as specified and directed.

S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings (Paymentfor providing grooves shall be made separately). complete all as specified.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/path complete all as specified and as directed.

M & L for precast cement concrete kerb stone type B-1 (20mm graded aggregate) of size 300x 450x200mm thick and setting in CM 1:4 complete all as specified and directed.

M&L for Plain Cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in copings and the like including weathering, slightly rounded or chamfered angles & throating including provision of necessary formwork, complete including demolition of existing coping all as specified and as directed.

S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed .

M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.

M & L for 300 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.

M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 300 mm bore incl forming cradles complte all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 300 mm bore drain pipe complete all as specified and as directed.

S & F for Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement complete.

S & F for Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete.

S & F for Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 after dismantling of existing floor tiles of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing after dismantling of existing tiles of any type complete all as specified and as directed.

Taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, haking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for preparation of plastered or unplastered old decorated surfaces of wall and ceiling including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with Wall Care Putty and applying One coat of Oil bound distemper complete all as specified and directed.

Fabrication & fixing of Modular wardrobe/ Kitchen cupboard made out of 18-20 mm thick HDHMR boards with 2.00mm thick fabric colour laminate sheet of approved quality and texture on all exposed sides with edge complete all as specified and as directed. (Design and pattern as approved by GE). (Make : Rajshree or equivalent)

S & F for 18-20mm thick HDHMR boards with laminated fabric colour on both sides, fixing in partitions of Modular kitchen cabinet & wardrobe/ cupboard complete all as specified and as dirfected.

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.

50mm size cup board locks of brass, 2 levers including keys set, complete all as specified and as directed.

S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified and as directed.

S & F for Hettich soft closure hinges of premium quality, fixed in door/cup board shutters complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 after dismantling of existing floor tiles of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete.

M & L for 18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4, rounding to edge as per required after dismantling of existing granite of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete.

M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick screed bed in CM 1:4 after dismantling of existing tiles of any description after cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected.

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.

S & F in repairs Angle valve of CP any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Make: Jaquar/Prayag/Kohler/Plumber)

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. (Make: Jaquar/Prayag/Kohler/Plumber)

S & F in repairs 20mm dia Chromium plated towel rail 60cm long fixed to wall including all fittings for fixing complete all as specified and directed. (Make: Jaquar/Prayag/Kohler/Plumber)

S & F in repairs 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Prayag/Kohler/Plumber)

S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

M&L point wiring with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed multistranded copper conductor cable ISI marked in and including concealed PVC conduit 20mm dia medium grade ISI marked with all fittings, 1.50 Sqmm PVC FRLS insulated unsheathed multistranded copper conductor earth wire connected to common earth dolly, Metal flush box & modular cover plates of suitable sizes for fixing of modular switch, socket, fan regulator etc and making good disturbed surfaces so as to match with original by plaster in CM 1:4 and providing finish as per existing all as directed by Engr-in-Charge. (Note: The cost of metal flush box, cover plate, cement mortar and existing finish shall be deemed included in unit rate quoted)

(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch.

(b) one socket outlet point 5 amps on the same board.

All as per srl item no. 01 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire.

S&F of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.

S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.

S & F of Ceiling rose, insulated body, 3 terminal, 240 volts, etc complete all as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 08 way, 240 volts with bus bar rating 200 Amps including dust and vermin proof and making all necessary connections complete all as directed.

Supply and fixing of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing of isolator 32 Amp, SPN type complete all as specified and as directed.

Supply and fixing of LED tube light fitting, 20 watt cool/warm white with and including all electric connections complete all as specified and as directed.

Supply and fixing of LED mirror light fitting 10 watt, cool/warm white and making all electric connections complete all as directed.

S&F of ventilatiing fan 250mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.

Supply and fixing of LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

Supply and fixing of security light fitting bracket, 1 mtr long made out of galvanized iron pipe of 25 mm dia size light grade bent to shape complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat complete all as directed.

S&F of Geyser 50 litre capacity vertical type with steel tank and glass inner linen complete 5 star rating as per BEE including fastners for hanging and CP and PVC connection for inlet and outlet water connection upto stop cock(excluding stop cock) complete all as specified and as directed.

Material and labour of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and directed at site by Engineer-in-Charge.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and directed by the Engr-in-charge.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and directed by the Engr-in-charge.

M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.

S&F of Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F of Modular white cover plate with frame 12 module all as directed

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in and including PVC concealed conduit with pvc conduit fittings like bends,tees, couplers etc and including 4.0 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble. complete all as specified.

Supply only of high pressure booster pump with auto boost automatic pump controller coupled with electric motor of capacity 0.50 HP, 230 Volts single phase, 50Hz connecting accessories of GI i.e. bend, nipple, socket, Tee of requisite size etc including cutting of existing pipe complete all as specified and as directed. (Make: Usha/Crompton/V Guard/Khaitan/CR/Leader/Accord)

SREE BABA TRADERS

Akhil Enterprises

tarun construction co

N.M. ASSOCIATES

HANUMAN BUILDERS

POONAM ENTERPRISES