SPL REPAIR TO BLDG NO P-15 (04 DUs) AT MIDDLE SHANKAR VIHAR UNDER AGE B/R-II AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

M&L for injecting chemical chlorpyrifos emulsifiable concentrate for Post Constructional Anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litre/RM including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L for Post constructional Anti termite Treatment of soil under existing floors using chemical chlorpyrifos emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of reinforcement to facilitate demolition (Parapet wall) complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (20 mm graded crushed stone aggregate) as in fins, slab,fascias, louvres, parapets, and railings, newels, balustrade, and the like complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia & over as in reinforcement of columns, beams, RCC, slabs, chajjas, lintels etc cut to length bent to shape required including cranking, bending, spirally hoping for columns, hooking ends and welding the new reinforcement with old steel bars and binding with mild steel wire not less than 0.90mm dia complete all as specified and as directed.

M&L for mild steel TMT bars 8 mm dia, cut to length bent to shape required including cranking bending spirally for hoping for columns, chajjas to parapets etc hooking ends and binding with mild steel wire not less than 0.90mm dia complete.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.; vertical or to better, fair finishes complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc.; vertical or to better, fair finishes complete all as specified and as directed.

M&L for factory made Fiberglass Reinforced Plastics (FRP) “CHAJJA” 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos. vertically and 1 nos. horizontally 50x2 mm thick M.S. Flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete using silicon sealant from top and bottom to make it water proof in one single piece casted monolithically including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS: 11551 complete with protective Gelcoat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight complete all as specified and as directed. Note : All fittings/fixtures including in above quote rates.

M&L for chipping out spalled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00 Kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site Notes :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

M&L for Brick work with sub class "B" bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, (up to four story Bldg) complete all as specified and as directed.

M&L for Brick work with sub class "B" bricks, straight or curved on in half brick thick wall built in cement mortar 1:4, (up to four story bldgs) complete all as specified and as directed.

M&L for Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area complete all as specified and as directed.

M&L for Cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) as in roof padding, finished even and smooth without using extra cement ,including cleaning the concrete surface by steel wire brushes, up to three stories bldgs, complete all as specified and as directed.

M&L for roof treatment in following stages, complete all as specified and as directed :- (i) Preparation of concrete surfaces by wire brush and cleaned top surfaces of cement concrete . (ii) APP polymeric water proofing membrane minimum 3 mm thick and wieghing not less than 3.5 Kg per Sqm, black finish reinforced with non woven polyester matt with a thermo fasable finish laid over bitumen primer @ 0.5Kg/Sqm by torching application with a propane or a butrane gas torch with an overlap of 100 mm at the sides and 150mm at the ends, as per manufacturers instructiions incl preparation of surface and applying two coats of aluminium paint over membrane (Manufacturer as approved by GE).

S&F for Heat Resistant Terrace ceramic Tiles (300 mm x 300 mm x minimum 10 mm thick) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and set and jointed with epoxy tile grout to match the colour of tiles using 3 mm thick PVC spacers complete including providing skirting along the parapet walls of height over and including 15 mm thick screed bed/backing coat in cement mortar 1:4, complete all as specified and as directed.

M & L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness on cooking platform, floors, aprons, skirting etc laid bedded and pointed in any morter complete all as specified and directed

M & L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, cooking platforms, skirtings with necessary hole for gas pipe where ever required and likes over and including screed bed of 20mm thick in cement mortar 1:6 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and as directed.

M&L for Udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, riser/skirting, jambs, pillars, window cills, and like including including 20 mm thick screed bed in cement mortar 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for Glazed Ceramic coloured tiles in vertical surface 600X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 10 mm thick backing coat of cement mortar 1:4, complete all as specified and as directed.

M&L for Vitrified Ceramic tiles , double charged light shade 8- 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200mm), as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 15 mm thick cement mortar screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tiles double charged (light shade) 8-10 mm thick (Square/ rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm of size (600mm X 1200 mm), in floors etc. as in skirting laid on 10 mm thick cement plaster in cement mortar 1:4, set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for Non Skid coloured ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L for Non Skid coloured ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L Non Skid ceramic tiles 8 to 10 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, as in skirting laid on 10 mm thick cement plaster in cement mortar (1:4) , set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed.

S&F in repair floor mounted, vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, Size, colour and pattern including integrated vitreous china cistern of capacity 10 liter with dual flushing system, including all fittings and fixtures with soft close seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete all as specified and as directed.

S & F in repair Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, coloured, with integral foot rests including provision of cement concrete bedding, connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor, complete all as specified and as directed.

S&F in repair low level flushing cistern of 10 ltr capacity PVC valveless, syphonic action type, white with inlet ball valve float and handle complete all as specified and as directed.

S&F in repair Brass CP health faucet hand shower type with 8 mm dia 1.2 m long flexible Tube and Wall Hook screwed for iron pipe fancy type long body, complete all as specified and as directed. Make : Jaquar CAT Part No. ALD 573, Cera CAT Part No.F8030107AB, Hindware CAT Part No. F160023, Kohler CAT Part No. K-98100IN-CP

S&F in repair Toilet paper holder with flap, brass chromium plated, complete all as specified & as directed . Make : Cera CAT Part No: F5004110, Jaquar CAT Part No.CPA-CHR-1153, Hindware CAT Part No.F-880003CP, Kohler CAT Part No K-5633IN-CP

S&F in repair, vitreous china wash hand basin of size 550x400mm , white flat back , including waste coupling of PTMT 32 mm and waste pipe, 02 no of bracket and bolt complete all as specified and as directed.

S&F in repairs stainless steel (SS-304) foldable towel rack 60 cm long and 24 cm deep with towel rail and hangers at bottom fixed to walls complete all as specified and directed.

S&F in repairs fancy type 150 mm dia brass CP shower rose including shower arm 600 mm long, complete all as specified & as directed. Make : Cera CAT Part No. F-7010609AB & F-7040207, Jaquar CAT Part No. OHS-CHR-1663 & SHA-CHR-479L600, Hindware CAT Part No. F-160219CP & F-160024CP, Kohler CAT Part No. K-23657IN-CP & K-16346-IN-CP

S&F as in repair corner sheet glass 300 mm radius assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and as directed.

S&F in repair fancy type 15 mm dia brass chromium plated quarter turn basin mixer with braided hose for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and as directed. Make : Jaquar CAT Part No: FLR-CHR-5167NB, Cera CAT Part No: F-2008461, Hindware CAT Part No. F570014, Kohler CAT Part No. K-29928IN-4ND-CP

S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make : Jaquar CAT Part No: FLR5281N, Cera CAT Part No: F-2002403, Hindware CAT Part No. F-570022, Kohler CAT Part No K-98754IN-4-CP

S&F in repair fancy type 15 mm dia brass chromium plated quarter turn fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes complete all as specified & as directed. Make : Jaquar CAT Part No: FLR5309N, Cera CAT Part No: F1003501, Hindware CAT Part No. F570027, Kohler CAT Part No. K-99483IN-A4-CP

S&F in repairs 15 mm bib tap, brass chromium plated fancy type (quarter turn), long body screwed down including necessary extention piece complete all as specified and as directed.

S&F in repair 15 mm dia brass chromium plated angle valve fancy type (quarter turn), screwed at ends including necessary extention piece complete all as specified and as directed.

S&F in repairs PVC Connecton pipe (PVC) 15 mm dia and 450/600mm long complete all as specified and as directed.

Dismantling of floor of size exceeding 1.5 Sqm but not exceeding 4.00 Sqm m for EWC water closet and removing out the cinder/concrete from sunken protion, grinding any sharp edges etc complete all as specified and as directed in following steps: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of Each WC portion is n.exc 4.00 Sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.

Dismantling of floor of size not exceeding 1.50 Sqm for EWC water closet and removing out the cinder/concrete from sunken protion, , grinding any sharp edges etc all as specified and directed in following manner: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified. (d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of Each WC portion is n.exc 1.50 Sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.

Taking down Door chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Door chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: - For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

S & F 35mm thick factory made wire mesh solid WPC door shutter consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification complete all as specified and as directed.

S & F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

Taking down (steel Window) chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down (Steel Window) chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

S&F fabricated aluminum window with powder coated anodized (powder coating not less than 50 micron) aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/ fixture /aluminum snap beads complete all as specified. Notes: (a) Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of SS wire mesh and all fittings/ fixtures deemed to be included in the above quoted rates and no extra shall be paid.

M&L for powder coated aluminium anodised (powder coating not less than 50 micron) three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section(two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed. Notes: (a)For Provn of fixing window AC, clear opening shall be divided horizontally at appropriate height / as directed by Eng-in-Charge i.e whole opening shall be divided in two portion and measurement shall be taken for clear opening i.e. out to out of window opening as a whole including all fittings and fixtures and no extra shall be paid separately . (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.

M & L for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

M & L for preparation of new Steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and as directed.

S & F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M & L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted Steel surfaces exc 10cm width or girth and applying one coat of aluminium paint of approved shade/tint complete all as specified and as directed.

S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade with brass/bronze hinge pin complete all as specified and as directed.

S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section,etc. complete all as specified and as directed.

S&F stainless steel AISI 304 grade handle of size 200 mm long etc. complete all as specified and as directed.

S&F Stainless steel of AISI 304 Grade, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Magic eye and fixed to doors all as specified and directed complete all as specified and as directed.

S & F Hasp and staple -100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete all as specified and as directed.

S & F Floor door stopper (double leg) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 60mm complete all as specified and as directed.

S&F Stainless steel drapery curtain rods 1.6 mm thick confirming to ASTM Schedule 5S gold or antique silver 25 mm nominal dia of SS-304 grade of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod including taking down old pelmet, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete.

M&L for Chequered cement concrete tiles with grey cement and pigment 25 cm x 25cm x 22-25 mm thick set & jointed and pointed in cement slurry to match over and including 15 mm thick screed bed in cement mortar 1:6 on plinth protection including 50 mm thick cement concrete 1:3:6 type C2 using 20 mm graded crushed stone aggregate as in plinth protection, laid to slope of 1 in 24 in alternate basis system, without, each bay shall not exceed 3 m in length, 12mm wide joint & 50mm deep joint shall be formed between the bays which shall be filled with Mastic filling to full depth comprising a mixture of 1 part of heater hot blow bitumen 85/25 portion and two parts of heated Badarpur sand (by volume) complete all as specified and as directed.

Supplying and fixing 20 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Brass threaded elbow, Tee, Male Female adaptor etc) SDR 11 fittings on walls/ceiling or laying in floors including taking down of 15/20 mm bore GI pipe complete all as specified and as directed.

Supplying and fixing 25 mm outer dia CPVC pipes SDR 11 & CPVC plain and brass threaded (Brass threaded elbow, Tee, Male Female adaptor etc) SDR 11 fittings on walls/ceiling or laying in floors including taking down of 25 mm bore GI pipe complete all as specified and as directed.

M&L for rotational moulded HDPE water storage tanks 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut, tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore including dismantling water tanks of capacity not exceeding 500 litres complete all as specified and as directed.

M&L for rotational moulded HDPE water storage tanks 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR-I including brass valve high pressure with polythne float and fly nut, tank nipple as required complete, screwd for iron pipe or brass ferrule size 25 mm bore including dismantling water tanks of capacity not exceeding 1000 litres complete all as specified and as directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe 20 mm bore complete all as specified and as directed.

S & F in repairs Gun metal globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe 25 mm bore complete all as specified and as directed.

S & F in repairs Sinks with drainage board made of 1mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete all as specified and as directed.

S&F sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F 110 mm uPVC pipes Type 'B' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including Dismantling of cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains, complete all as specified and as directed.

S&F 75 mm uPVC pipes Type 'B' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including Dismantling of cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains, complete all as specified and as directed.

S&F 110 mm uPVC pipes Type 'A' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including Dismantling of PVC or cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains, complete all as specified and as directed.

S&F 75 mm uPVC pipes Type 'A' (for waste water), single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls including Dismantling of PVC or cast iron or reinforced concrete drains pipes , jointed in cement morter and taking out of trenches if required up to 100 mm internal dia of drains, complete all as specified and as directed.

S&F 110 mm uPVC (SWR) Bends/ Tees/ Tapers (any radius), with or without oval access door as required complete all as specified and as directed.

S&F 75 mm uPVC (SWR) Bends/ Tees/ Tapers (any radius), with or without oval access door as required complete all as specified and as directed.

S&F in repairs uPVC multi floor trap with grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and as directed.

S & F Stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, for any bore and any type of pipes complete all as specified and as directed.

M & L for cement plaster 15 mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement mixed with and including permeability reducing polymer @ 250gm/sqm (6%) by weight of cement at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc including taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and as directed. Note : Rates for water proofing compound/ polymer deemed to be included in the above rates.

M &L for applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100 gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete all as specified and as directed.

M&L for Exposing the first joint of masonry structure at ground level horizontally and knocking off the plaster least 50 cm beyond the visibly penetrated area., scrapping out damaged mortar joints to a depth of approximately 2-3 cm. Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer's instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge. Cleaning of holes by air blower prior to fixing nozzles, installation of latex polymer packer injection packers 9.8mm diameter, 10cm long in the holes and tighten, Fixing the packer securely using sealent and Cutting/removing of Packers after completion of grouting/injecting without damaging structural elements

Supplying and application of very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time, having mixed viscosity 3 to 11 m.Pa.s at 20 Deg C, reaction time adjustable according to ambient temperature and execution time requirement between 8-50 mins, the polyacrylic resin is pumped into the wall through packers injection at a pressure > 20 Bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas cause rising dampness. When polyacrylic resin movement stops or polymer compound appears at the packer, move to the next packers and inject (Approx 0.2-0.3 Kg resin per packer). Make : SIKA/FOSROC/BASF

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and as directed.

M&L for 15 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth complete all as specified and as directed.

M&L for 10 mm thick rendering with ready mix plaster on faces of brick or concrete wall surface, finished even and smooth complete all as specified and as directed.

M&L for 5 mm thick rendering with ready mix plaster on faces of brick or concrete surface of ceiling/wall, finished even and smooth complete all as specified and as directed.

M & L for preparation of the newly plastered surfaces of walls/ ceiling and applying one coat of water proof cement base wall putty avg 1-1.5 mm thick suitable for external surafce and thereafter applying two coats on walls/ceiling with spray machine, of GreenPro certified water-based, modified acrylic, exterior Emulsion paint as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6 sqm/ltr over a coat of primer, necessary tools and machinery to give an even shade complete all as specified and as directed.

M & L for preparation of the newly plastered surfaces of walls/ ceiling and applying including 1mm thick cement base wall care putty to obtain an even surface and thereafter applying two coats of distemper oil emulsion over one coat of primer, with spray machine on wall/ ceilling surface white or tinted with and necessary tools and machinery to give an even shade complete all as specified and as directed.

Complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller and applying one coat of water proof cement base wall putty avg 1-1.5 mm thick suitable for external surafce thereafter applying two coats with spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr over a coat of primer, necessary tools and machinery to give an even shade complete all as specified and as directed.

Complete removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller and applying 1mm thick cement base wall care putty to obtain an even surface and thereafter applying two coats of distemper oil emulsion, with spray machine on wall/ ceilling surface white or tinted over one coat of primer with and including necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work complete all as specified and as directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size for WC/Bathroom/Toilet/Kitchen & Cabinets comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws including dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) laminated Board of required size for WC/Bathroom/Toilet/Kitchen & Cabinets comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws including dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S & F CP clip on hinges (Inset) complete all as specified and as directed .

S&F 15 mm mild steel, chromium plated rod with fixing brackets, fixed in cupboards for hanging cloth of adequate strength all as specified and as directed.

S&F stainless steel AISI 304 grade handle of size 75 mm long,etc. complete all as specified and as directed.

S&F Magnetic catch for wooden cupbord with complete closer macanigum claps and clips fix with stainless steel screw complete all as specified and as directed.

M&L for cleaning the sides rolling shutter shafts guide channel and greasing of moving parts of rolling and straightening rolling and replacement of bolts nuts etc as required for smooth functioning of shutters and taking out existing rolling shutters if required and refixing the same in original position complete all as specified (opening of shutter exc 2.00 m and not exc 3.50 m and area exc 6.00 sqm and n.exc 9.00 sqm all as specified)

S& F in repairs mild steel spring conforming to IS 62A-1970 of approved make in existing rolling shutters/opening of shutters exc 2.00 m and n.exc 3.5 m complete all as specified and as directed.

S&F in repair steel rolling shutters, thickness of lath 1 mm, with out ball bearing, top cover, anchoring rod and hasp & staple, erected in position where required (in patches or whole), complete push pull or manual type complete all as specified and as directed.

S& F staianless plate rack made of 1 mm thick stainless steel sheet of size 750 mm x 900 mm x 210mm consisting of 3 shelf for bowls and one shelf for keeping six nos of big utensil and seven nos of small utensils divided by 10 mm dia stainless steel hollow pipe @ 60 mm centre to centre or as per drg and sample kept in GE"s office complete all as specified and as directed.

S & F Continuous (piano) hinges width of flap 30 mm, mild steel, bright finish or electrogalvanised fixed to steel chowkhat with welding or with screws complete all as specified and as directed.

M & L for 100 mm thick Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over and including 50 mm thick sand cushion complete all as specified & as directed.

M&L for cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified and as directed.

M&L for DWC HDPE sewage pipe SN8 of dia 150 mm laid and jointed including execavation in soft/loose soil , returning filling and removing of suplus soil complete all as specified and as directed.

M&L concrete bed to drain pipes for 150 mm dia in cement concrete 1:3:6 type C2 including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and as directed.

M&L HDPE DWC gully trap 150 mm, setting and jointing with solvent cement including reducer to fixed with pipe complete all as specified and as directed.

S&F in repair factory made FRP gully trap cover with locking arrangement commercial grade having loading capacity 2.5 tone of size 300 x 300 mm with frame set in cement mortar 1:4 complete all as specified and as directed.

S&F in repair bib tap standard of PTMT any color high pressure screwed for iron pipe and fixed to 15 mm bore complete all as specified and as directed.

S&F in repair stop valve standard of PTMT any color high pressure screwed for iron pipe and fixed to 15mm bore complete all as specified and as directed.

Taking down carefully aluminium/copper point wiring (light/fan/bell/socket /power) with complete fittings such as steel terminal boxes, switches, ceiling roses, pendents, regulators, sockets etc and removing the material including making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface complete all as specified and as directed.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) . Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete.

All as per srl item No 124.00 here-in-before but 5 Amp socket outlet on same board.

All as per srl item No 124.00 here-in-before but One socket outlet 5 Amps on independent board.

All as per srl item No 124.00 here-in-before but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.

All as per srl item No 124.00 here-in-before but for one light point controlled by two 2-way switch.

M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit complete including 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete. Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete

S&F switch modular type, 1 way 6A, 1 module complete all as specified and as directed.

S&F switch, Modular switch 2 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin 2 module complete all as specified and as directed.

S&F switch modular type 1way 16A, 1module with indicator complete all as specified and as directed.

S&F Socket 6A/16A - 2/3 pin combined complete all as specified and as directed.

S&F Modular Bell push 6A 1 module complete all as specified and as directed.

S & F in replacement, Decorative wall light mounting suitable for LED Lamp upto 15 Watt complete with all connections complete all as specified and as directed.

S&F in replacement Surface mounting round shaped LED downlighter with durable housing with Al heat shrink with diffuser to give glare free light 12 Watt LED 6000K/6500K lamp type from ceiling of stairs/common areas, complete all as specified and as directed.

S&F in replacement Wall mounted LED Integrated Batten 20 Watt - 4Ft White,CRI 80, Polycarbonate, 120 Lumens per watt,6500K(cool White)4000 K (Natural White), Pf < 0.90 indoor LED batten complete all as specified and as directed.

S&F in replacement Wall mounted LED Integrated Batten 10 Watt - 4Ft White,CRI 80, Polycarbonate, 120 Lumens per watt,6500K(cool White)4000 K (Natural White), Pf < 0.90 indoor LED batten complete all as specified and as directed.

S&F Modular AC Box with socket and MCB SP 20 Amp complete with Metal box , white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement , complete all as specified and as directed.

S&F in replacement of lamp holder Angle/ Batten type bakelite insulated body with back plate complete all as specified and as directed.

S&F LED bulb 15 Watt, CRI 80, Frosted glass, 3000K white 100 Lumens/watt Pf <0.90, Min 25000 Hr IP rating 20 complete all as specified and as directed.

S&F of electric bell Ding Dong type AC, 230 volts single phase complete all as specified and as directed.

S&F ceiling rose surface Bakelite 65x25mm two to three terminals complete all as specified and as directed.

S&F in replacement LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE in replacement of old unsv bulk head fitting including all accessories connecting up twin core flexible copper conductor cable complete all as specified and as directed.

S&F in replacement of building security light fitting 35W LED 5000K new Powder coated pressure die cast aluminium compact LED Street light including pole of dia 40 mm of bracket duly fixed with clamps, nut, bolts & washers etc and all as directed.

Taking Down of ceiling fan and keeping it in safe custody and refix ceiling fan back after completion of B/R work complete all as specified and as directed.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with remote control, Suitable cell for remote, Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade, 30 cm long down road, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply including taking down old ceiling fan and depositing to MES store yard complete all as specified and as directed.

Taking Down of Exhaust Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and as directed.

S&F Exhaust Fan, Metal body, copper wound 300 mm Sweep with metal louver and connecting up with replacement of cable T/C flexible cable of size:- 1.50 Sqmm from ceiling rose / connection to fan complete all as specified and as directed. Note :- For Fixing exhaust fan hole of suitable size will be done by contractor without extra cost were it is not available.

Supply & fixing of water storage heater, 5 star, Glass lined enamel coated incoloy heating element ,Digital temperature display, Feather touch buttons, Shock resistant injection moulded ABS body, IPX4 waterproof technology, Tank design is suitable to withstand 8 bar pressure (Geyser) of capacity 25 litre ISI mark, , AC, electric, 415 volt, complete , 3 core lead, including PRCD Plug top, safety valve, including electric and water connection and making good to disturbed surface including taking down existing water storage heater complete all as specified and directed. Notes :(i) Existing old geyser to be taken down from wall and deposit to the MES Yard for custody. (ii) Electric switch for geyser of 16 Amps shall be provided on main switch board of the bathroom and socket outlet shall be provided near the geyser and will be measured as 16 amps power wiring.

S&F in replacement of VTPN DB 4 way, 4Pole double door,415V vertical type for fixing MCCB up to 160 Amps as incommer and MCBs as out goings with metel door and IP 43 Protections and connecting complete all as specified and as directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-08 Way, 240V complete all as specified and as directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-12 Way, 240V complete all as specified and as directed.

S&F in replacement of sheet metal enclosures double door for DBs when MCBs to be used SPN-4 Way, 240V complete all as specified and as directed.

S&F in replacement of MCCB 3 Pole, 415 V, fixed type, 160 Amps with breaking capacity 36kA complete all as specified and as directed.

S&F in replacement MCB SPN 63 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and as directed.

S&F in replacement MCB SPN 40 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc. complete all as specified and as directed.

S&F for MCB SP 40 Amps 240 Volts, 10kA, `B' curve all as per site requirement complete all as specified and as directed.

S&F for MCB SP 63 Amps 240 Volts, 10kA, `B' curve all as per site requirement complete all as specified and as directed.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, `B' curve all as per site requirement complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to GI wire 4 mm as earthing lead by means of nut, bolts and check nuts and washers, GI light grade protection pipe 15 mm dia upto 7.5 M, GI watering pipe 20 mm dia medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 3 of SSR Part I, including earth test point upto panel board, all as specified or indicated including testing on completion, complete all as specified and as directed.

S&F in replacement Sheet metal enclosure of size 350 x 250 x 150 mm suitable for mounting Pre paid meter fabricated from CRCA sheet with anti corrosive dust and vermin proof, complete all as specified and as directed. Note:- The meter cover shall have a transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover all as specified and directed.

Taking down and re fixing pre paid meter in meter box with consultation with pre paid meter authorities including necessary connections of incoming and out going cables for light and power complete all as specified and as directed.

Taking down unserviceable sub main wiring twin core of any size complete and making good disturbed surface complete all as specified and directed.

M&L for Sub Main wiring using single run PVC FRLS grade Insulated unsheathed, multistrand copper conductor cable 2 runs of 10 Sqmm for phase and neutral and 1 run of 10 Sqmm for earth wire drawn through concealed PVC conduit wiring in wall not less than 25mm dia with all fittings like tees, bends, junction/ terminal boxes etc as per site requirement complete all as specified and as directed. Note:- Phase should be of Red /Yellow/Blue, neutral should be of back and earthing wire should be of green colour. 2 runs of cable for phase/ neutral and 1 run for earth will be measured and paid as one unit length.

S&F wall mounted fully automatic domestic type Electric chimney in size range from 60 cm to 90 cm hood for 2-3 gas burners of suction capacity 1200 mtr Cum/Hr, touch, gesture control, filterless autoclean including all connecting accessories,fitting and fixtures complete all as specified and as directed. Note:- work for fitting of chimney including hole of suitable size for outlet will be done by contractor without any extra cost. Make : Elica, Faber, Hindware, Glen

Supply and fix wall mounted fan made of sturdy Engineering plastic complete voltage 230V, 50 Hz, Copper winding of sweep 400mm complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and as directed.

Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point, complete, all as specified and as directed.

Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strip armoured ,electric power cable (heavy duty ) 1100 volt grade with stranded aluminium conductor of size 70 sqmm, 3.5 core complete all as specified and as directed.

Supply and laying Double wall Corrugated (DWC) pipe in trenches 63 mm outer dia including all connecting necessary items complete all as specified and as directed.

Supply and fixing GI Pipe light grade with all fittings for passing of cables fixed to pole / wall / laid under floor or roads including all fixing accessories complete for protection of cable of size 80 mm dia bore complete all as specified and directed.

M/S HARINDER SINGH (BID ID -3381724)

M R INTERIOR HUB (BID ID -3381661)

Chaudhary Constructions (BID ID -3382709)

SMT Construction (BID ID -3381975)

Manisha Yadav (BID ID -3382790)

V S CONSTRUCTION (BID ID -3382893)

Kunal Construction Co. (BID ID -3382010)