MECHANICAL AND FIRE FIGHTING WORKS ALONG WITH ASSOCIATED PIPING FOR THE AMBIENT AIR HEATER PROJECT

Piping and Mechanical WORKS - PRODUCT , WATER, AIR, N2 PIPING SCHEDULE OF RATES FOR LAYING FABRICATION, ERECTION, TESTING & COMMISSIONING OF PRODUCT , WATER, AIR, N2 PIPING WORKS LAYING & WELDING OF PRODUCT PIPING (ABOVE GROUND) Laying and welding (3 runs min.) above ground/ below ground pipelines from supplied LTCS of the following sizes as described below, including cutting bevelling and fixing the supplied specials such as elbows, bends, tees, reducers, weldolet, socolet, coupling etc complete and hydrotesting the pipelines at 1.5 times Design pressure for a minimum period of Minimum 30min. The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Above ground pipeline to be laid through shoe/C-clamp support on concrete pedestals / pipe racks/ shed/ Equipment house and painting the pipeline including the colour coding as per the specifications enclosed. Welding of pipeline should conform to Radiography quality. 100% of the joints for product piping shall be radiographed and the cost of the same will be paid separately as per relevant line item. Note: a. Any repairs to the defective welding shall be made good at no extra cost. Re radiography of repaired joint shall also be at contractor's cost. b. The rates quoted also to include supply and application of painting and colour coding shall be as per Painting specifications (document no-W.004412-G-11097-P005). c. Welding and fixing of Flange and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. d. Supply and Installation of Support shoe/ C-clamp, rod, secondary steel etc as per detail Piping GA drawing for the product pipe shall be paid separately as per schedule of rates indicated elsewhere in this SOR. e. Supply and Installation of insulation etc shall be paid separately as per schedule of rates indicated elsewhere in this SOR. f. RM length for payment shall be the installation portion of pipe including fitting of all sizes excluding flange and valves. Installation of flanges and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. g. Preparation of documentation (Field quality plan, Fabrication, Isometric drawing from Piping GA, etc) .

15NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS

20NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS

25NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS

40NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS

50NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, BE, SEAMLESS

80NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

100NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

150NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

250NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

300NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

LAYING & WELDING OF CS PIPE for N2 lines Laying and welding (3 runs min.) above ground CS piping shall shift the same to the site of work at no extra cost with all leads and lifts) of the following sizes as described below, including cutting bevelling and fixing the supplied specials such as elbows, bends tees, reducers, weldolet, socolet, coupling etc complete and hydrotesting the pipelines at 1.5 times Design pressure for a minimum period of Minimum 30min. The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Above ground pipeline to be laid on concrete pedestals and painting the pipeline as per the specifications enclosed. Note: a. Any repairs to the defective welding shall be made good at no extra cost. b. The rates quoted also to include supply and application of painting and colour coding shall be as per Painting specifications (document no-W.004412-G-11097-P005). c. Welding and fixing of Flange and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. d. Supply and Installation of U-bolts, nuts, washers etc to be included in this SOR line item. e. Supply and Installation of secondary steel etc as per detail Piping GA drawing shall be paid separately as per schedule of rates indicated elsewhere in this SOR. f. RM length for payment shall be the installation portion of pipe including fitting of all sizes excluding flange and valves. Installation of flanges and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. g. Preparation of documentation (Fabrication, Isometric drawing from Piping GA, etc).

25 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-80, BE, SEAMLESS

50 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS

100 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS

LAYING & INSTALLATION OF GI MS pipe for INSTRUMENTATION AIR & Condensed water Transfer PIPE LINE Laying and welding (3 runs min.) MS GI piping shall shift the same to the site of work at no extra cost with all leads and lifts) of the following sizes as described below, including cutting bevelling and fixing the supplied specials such as elbows, bends tees, reducers, weldolet, socolet, coupling etc complete and hydrotesting the pipelines at 1.5 times Design pressure for a minimum period of Minimum 30min. The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Above ground pipeline to be laid on concrete pedestals and painting the pipeline as per the specifications enclosed. Note: a. Any repairs to the defective welding shall be made good at no extra cost. b. The rates quoted also to include supply and application of painting and colour coding shall be as per Painting specifications (document no-W.004412-G-11097-P005). c. Welding and fixing of Flange and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. d. Supply and Installation of U-bolts, nuts, washers etc to be included in this SOR line item. e. Supply and Installation of secondary steel etc as per detail Piping GA drawing shall be paid separately as per schedule of rates indicated elsewhere in this SOR. f. RM length for payment shall be the installation portion of pipe including fitting of all sizes excluding flange and valves. Installation of flanges and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. g. Preparation of documentation (Fabrication, Isometric drawing from Piping GA, etc) .

15 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE

25 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE

50 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

80 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

100 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

150 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

Radiography inspection on Product piping joints of all types and thickness including providing all necessary equipment required to perform the work as per our specification and direction of engineer-in-charge. The radiographs shall be submitted to the engineer in charge at site/ third party inspecting agency. Notes: 1. Bidder shall consult with IOCL /IOCL's Representative before execution of radiography for lengths and width of the film to be used. 2. As a guide line, 3" wide film shall be used Upto 2" dia pipes. 4” wide film shall be used above 2" dia pipes.

50 mm dia pipe

80 mm dia pipe

100 mm dia pipe

150 mm dia pipe

250 mm dia pipe

300 mm dia Pipe

Installation and Welding of the supplied WNR/SOR flanges on the pipelines with 1 run inside and three runs outside etc complete and as per specifications enclosed. The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Surface Preparation and Painting shall be as per the specifications enclosed including the colour coding as per IPPL specifications. Welding of flanges should conform to Radiography quality. The cost of the same will be paid separately as per respective item etc. and as directed at site. Note: a. Any repairs to the defective welding shall be made good at no extra cost. Re radiography of repaired joint shall also be at contractor's cost. b. The rates quoted also to include supply and application of painting on product piping in line with colour coding of pipelines as per the PTS Painting.

LTCS Flanges for Product Piping

20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-160, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-80, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-80, SERRATED FINISH

40 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 150, BW- ASME B16.25,S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH

80 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

100 NB FLANGE, WNRF, ASTM A350 LF2 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

150 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

200 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

250 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

300 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

CS Flanges for N2 Piping

25 NB FLANGE, SWRF, ASTM A105, ASME B16.5, CLASS 300, SW - ASME B16.25, S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH

100 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH

MS GI Flanges for IA line & Condensed water transfer line

15 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

20 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

50 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

65 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

80 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

100 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

150 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

Making flanged joints between flanges (WNRF/SORF/BLRF) of approved make for the following sizes, as per attached specifications, Data sheet and site instructions. Rate shall Include : 1) Supplying, Fixing & Installation of Stud Bolts, Nuts & Gaskets, washers, greasing ( Inclusive in Unit rates ). Material of Gasket & Fastners shall be as mentioned below : -Fastners Material for CS Flanges : STUD BOLT, A193-B7 (Hot Dip Galvanised) , NUT, A194-2H (Hot Dip Galvanised) -Fastners Material for LTCS Flanges : STUD BOLT, A320 Gr.L7 (Hot Dip Galvanised), NUT, A194 Gr.4 (Hot Dip Galvanised) -Gasket Material : Spiral Wound SS316L with SS316L Outer ring and SS316L inner ring and graphite filler. (Thickness as per PMS) 2) Cost for welding of flanges to respective pipe shall be paid separately as per schedule of rates indicated elsewhere in this SOR. This sectioned includes for cost of Bolts Tightening only. 3) Vendor shall estimate the Quantity of Bolts & Nuts, washers supply based on the Fittings & Flange BOQ provided with tender. 4) Material of Bolts Nuts shall be in line with respective Piping Material Specification 5) The flange joint shall also include providing and fixing multistrand copper wire/flat for bonding of product pipelines including provision of lugs. 6) All fasteners must be hot dip galvanized with coating 80 - 100 micron or appropriate coated to protect corrosion affect, after fasteners fixing, painting shall be done as per client approved procedure

20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-160, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-80, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-80, SERRATED FINISH

40 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 150, BW- ASME B16.25,S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH

80 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

100 NB FLANGE, WNRF, ASTM A350 LF2 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

150 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

200 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

250 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

300 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A105, ASME B16.5, CLASS 300, SW - ASME B16.25, S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH

100 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH

15 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

20 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

50 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

65 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

80 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

100 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

150 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

Fixing & Installation of the supplied HOV GATE VALVE / HOV BALL VALVE/HOV NRV/GLOBE VALVE/ Butterfly Other of the following sizes on the pipeline for the following sizes as per attached specifications, Data sheet and site instructions.. Rate shall Include : 1) Valves Erection Only. 2) Supplying, Fixing & Installation of Stud Bolts, Nuts & Gaskets. Bolting of Flanged Valves shall be paid seperately against item no. 6.0 i.e. (Making flanged joints ) 3) Storing Valves in enclosed environment. 4) mechanical cleaning/greasing of the valves after erection. 5) The rates quoted also to include supply and application of painting on product piping in line with colour coding of pipelines as per the PTS Painting. Painting Specification : Surface Preparation and Primer is applicable for insulated product & steam piping as per PTS Painting. 6) Item includes providing 8 SWG bare Cu wire for bonding between flanges for sizes up to 300 mm dia for Product pipelines.

Installing the supplied pneumatic operated shutdown valve as per specifications. Note: a. The job includes mechanical cleaning of valves and painting and colour coating as per Painting specification. The job includes providing and fixing impulse as per manufacturer's recommendations. b. Bonding of the valves shall be done using multistrand copper wire/flat for bonding of product pipelines including provision of lugs. c) Supplying, Fixing & Installation of Stud Bolts, Nuts, washers & Gaskets. Bolting of Flanged Valves shall be paid seperately against item no. 6.0 i.e. (Making flanged joints )

300mm dia , Solenoid operated Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH

Fixing the Thermal relief valves, Air Relief Valve & Pressure relief valves With Spiral Wound & Graphite Filled Metallic gaskets (with 100% spare quantity) confirm to SS316 with Graphite fill as per ASME B16.20, nuts & stud bolts confirm STUD BOLT, A320 Gr.L7 (Hot Dip Galvanised), NUT, A194 Gr.4 (Hot Dip Galvanised) - as per attached specifications, Data sheet and site instructions.

20NB X 25NB, TRV, A351 Gr CF8, ASME B16.34, ASME SEC VIII DIV I, ASME B16.10, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 INLET CLASS 300 & OUTLET CLASS 150.

INSTALLATION OF SUPPLIED Ambient Air heater system: Transportation incuding loading & Unloading with all leads & lifts of Equipments, Vessels, machinery etc. from OWNER's Trailors/ Trucks etc and stores/storage yard of contractor /inside the Terminal to the work site; assembly of parts/sub-assemblies; checking, cleaning and preparing the top of foundation and pockets for erection; placing the equipments, Equipments installations, machinery etc. on foundation or structure; leveling, alignment, grouting,first maintenance; and make ready for commissioning ,completion of all jobs as per drawings, scope of work & technical conditions as defined in the enquiry specifications, standards, codes and instructions of OWNER/CONSULTANT. Rates shall include cost of labor, supervision, deployment of tools & tackles, consumables, cranes of suitatable capacity, hydra, materials and other associated arrangements required to execute all the related activities. as per the enclosed specifications, data sheets, PID etc. NOTE: a) Erection of Equipments/ Vessels etc shall be done under the supervision of OEM VENDOR/ SPECIALIST. b) The cost of RCC foundation, grouting, MS Structural steel etc shall be measured & paid separately under respective civil items. c) Painting with approved make, colour, shade including colour coding as per specifications shall be part of rate quoted. d) Item includes provision of Mill rate fitter, required dial gauges & aligning all the rotary equipment within the tolerance limits. e) Unloading of equipments & storing the same in IPPL premises is also included in the scope of bidder.

PROPANE AMBIENT AIR HEATER FOR 240MT/HR DESIGN FLOW (5 bays with 2 tube bundles/bay using 2 nos FD fan/bay each motor rating 45KW)

BUTANE AMBIENT AIR HEATER FOR 240MT/HR DESIGN FLOW (2 bays with 2 tube bundles/bay using 3 nos FD fan/bay each motor rating 45KW)

Supply, fabrication,edge preparation & erection of pipe supports along with requirement of shoes, cradles, hangers, clamps (of all sizes/thicknesses), turn buckles, stiffening rings, guides, special supports, pads, T post, point support to pipes etc as per drawings, standards, specifications, conditions & instructions of Owner / Owner’s representative. The rate shall include blast cleaning of external surfaces of supports to SA 2½ & painting as per IPPL spec,the cost of materials, consumables, labor and overheads/profits etc. NOTES: For Supply, Fabrication & Erection of supports a) Pipe supports materials, all fasteners such as bolts, studs, nuts, washers, all types of required anchor bolts etc. are to be supplied by VENDOR at his cost. Fixing of all the anchor bolts is in vendor scope. b) Welding for supports shall include preheating and all tests such as dye-penetrant test, pneumatic tests, hardness test etc. as required by standards, codes, specifications and instructions of OWNER / OWNER REPRESENTATIVE. c) Pipe support includes structural’s & trunnion pipes. d) All Structural steel must be hot dip galvanized with coating, painting shall be done as per client approved procedure

Installation of wear pad over pedestals including cutting and fabrication from supplied pipes (same diameter, schedule etc) and welding of the same on pipelines under pedestals with minimum 2 run of welding complete including tell tale hole as per specifications, drawings and directions of Engineer in charge to be included in this SOR line item. Civil works for the RCC Pipe Pedestal/ Sleeper along with connected Base plate shall be under civil contractor scope,.

Supply, fabrication,edge preparation, erection and installation of cold pipe support along with requirement of shoes, cradles, hangers, clamps, insulation etc as per detail Piping GA drawing and technical specification for following sizes:

SUPPLY ITEMS: FOR PIPELINE WORKS (Supply of Items as per attached PTS,GTS,Data Sheet,QAP and PMS, PID, GAD) 1. Before procurement of any of the materials Contractor will take prior approval from IPPL/EPMC. 2. Payment will be made for actual quantity used 3. All items under this section shall be quoted for supply to site including unloading & Stacking properly anywhere inside the IPPL premises as directed . Third party inspection for the supply items shall be in tenderer's scope, wherever applicable. Approval of TPI agency shall be obtained from M/S IPPL on award of contract & engaged for inspection & clearance of all materials as per agreed QAP to be firmed up after placement of order by the Corporation. LTCS PIPES for Product

15NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS

20NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS

25NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS

40NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS

50NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, BE, SEAMLESS

80NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

100NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

150NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

250NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

300NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS

CS PIPE for N2 lines

25 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-80, BE, SEAMLESS

50 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS

100 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS

GI PIPE for IA line & Condensed water transfer line

15 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE

25 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE

50 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

65 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

80 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

100 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

150 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE

Supply LTCS Ball Valve for product line as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

20 mm dia ,HOV BALL VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 WRENCH OPERATED.

25 mm dia ,HOV BALL VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5,SERRATED FINISH, WRENCH OPERATED.

25 mm dia ,HOV BALL VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5,SERRATED FINISH , WRENCH OPERATED.

50 mm dia ,HOV BALL VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5,SERRATED FINISH, WRENCH OPERATED.

100 mm dia ,HOV BALL VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH, Gear OPERATED.

150 mm dia ,HOV BALL VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH, Gear OPERATED.

Supply CS Ball Valve for Utility lines & IA and condensed Water line: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

15 mm dia ,HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292/BS 5351, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH, WRENCH OPERATED.

20 mm dia ,HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH, WRENCH OPERATED.

25 mm dia, HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH, WRENCH OPERATED.

25 mm dia, HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH, WRENCH OPERATED.

50 mm dia ,HOV BALL VALVE, ASTM A 216 GR WCB, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH, WRENCH OPERATED.

100 mm dia ,HOV BALL VALVE, ASTM A 216 GR WCB, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH, WRENCH OPERATED.

Supply of LTCS Tripple offset Butterfly Valve: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

250mm dia , HOV Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH, Gear Operated

300mm dia , HOV Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH, Gear Operated

Supply of LTCS Solenoid operated Tripple offset Butterfly shutdown Valve solenoid operated: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

300mm dia , Solenoid operated Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH

Supply of CS Check Valve: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

100 mm dia , SWING CHECK VALVE, ASTM A216 GR WCB, ASME B16.34, ASME B16.10, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5.

Supply of LTCS Check Valve : as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

50mm dia , SWING CHECK VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH

150mm dia , SWING CHECK VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH

250mm dia , SWING CHECK VALVE, ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH

Supply of LTCS Globe Valve: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

20 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL

25 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL

50 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL

300 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL

Supply of LTCS Flanged Thermal Releif valves: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.

20NB X 25NB, TRV, A351 Gr CF8, ASME B16.34, ASME SEC VIII DIV I, ASME B16.10, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 INLET CLASS 300 & OUTLET CLASS 150.

CONDENSATE TRANSFER PUMPS : as per attached PTS,Data Sheet,QAP and PID.

Supply, Erection, Testing and Commissioning of Horizontal centrifugal Pump with electric motor and all others accessories as per attached Pump Datasheet (50m3/hr & 30 M head)

Supply of following flanges conforming to ASTM A- 105 (Galvanised);

15 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

20 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

50 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

65 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

80 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

100 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

150 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

Supply of following flanges (WNRF/SWRF) conforming to ASTM A350 LF2

20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-160, SERRATED FINISH

20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-160, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-80, SERRATED FINISH

25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-80, SERRATED FINISH

40 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 150, BW- ASME B16.25,S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH

80 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

100 NB FLANGE, WNRF, ASTM A350 LF2 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

150 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

200 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

250 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

300 NB FLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH

Supply of following flanges (WNRF/SWRF/SORF/THRD-RF) conforming to ASTM A105

25 NB FLANGE, SWRF, ASTM A105, ASME B16.5, CLASS 300, SW - ASME B16.25, S-80, SERRATED FINISH

50 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH

100 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH

Supply of following flanges (BLRF) conforming to ASTM A350 LF2, ASTM A- 105

20 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH

20 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

25 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH

25 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

50 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH

50 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

150 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

250 NB FLANGE, BLRF,ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

300 NB FLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

25 NB FLANGE, BLRF, ASTM A105, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

50 NB FLANGE, BLRF, ASTM A105, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

100 NB FLANGE, BLRF, ASTM A105, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH

20 NB FLANGE, BLRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

25 NB FLANGE, BLRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

50 NB FLANGE, BLRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

100 NB FLANGE, BLRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH

PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of LTCS/ CS seamless pipes with PE/BE as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMS Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. 90 Deg LR elbow (1.5D)

20 NB, ELBOW, 90 DEG., ASTM A350 LF2, ASME B16.11, Class 6000, SW SEAMLESS

25 NB, ELBOW, 90 DEG., ASTM A350 LF2, ASME B16.11, Class 3000, SW SEAMLESS

50NB Elbow 90°, LR (R=1.5D), ASTM A420 WPL6, ASME B16.9, SCH 80, BW – ASME B16.25, Seamless

80 NB,ELBOW, 90 DEG., LR (R=1.5D), ASTM A234 Gr.WPB, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS

150 NB,ELBOW, 90 DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS

250 NB,ELBOW, 90 DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS

300 NB,ELBOW, 90 DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS

25NB, ELBOW, 90 DEG., LR (R=1.5D), ASTM A105, ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

50 NB, ELBOW, 90 DEG.LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

100 NB, ELBOW, 90 DEG..LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

15NB, ELBOW, 90 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

25NB, ELBOW, 90 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

50NB, ELBOW, 90 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

100 NB,ELBOW, 90 DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

150 NB,ELBOW, 90 DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of LTCS/ CS/GI as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMS Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. 45 Deg LR elbow (1.5D)

20 NB, ELBOW, 45 DEG., ASTM A350 LF2, ASME B16.11, Class 6000, SW SEAMLESS

25 NB, ELBOW, 45 DEG., ASTM A350 LF2, ASME B16.11, Class 3000, SW SEAMLESS

50NB Elbow 45°, LR (R=1.5D), ASTM A420 WPL6, ASME B16.9, SCH 80, BW – ASME B16.25, Seamless

80 NB,ELBOW, 45 DEG., LR (R=1.5D), ASTM A234 Gr.WPB, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS

150 NB,ELBOW, 45 DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS

250 NB,ELBOW, 45 DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS

300 NB,ELBOW, 45 DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS

25NB, ELBOW, 45 DEG., LR (R=1.5D), ASTM A105, ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

50NB, ELBOW, 45 DEG.LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

100 NB, ELBOW, 45 DEG..LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

15NB, ELBOW, 45 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

25NB, ELBOW, 45 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

50NB, ELBOW, 45 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000 SEAMLESS

80NB, ELBOW, 45 DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

100 NB, ELBOW, 45 DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS

PIPE FITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMS Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. Equal Tee

20NB Equal Tee, ASTM A350 LF2, ASME B16.11, Class 6000, SW, Seamless

25NB Equal Tee, ASTM A350 LF2, ASME B16.11, Class 3000, SW, Seamless

50NB Equal Tee, ASTM A420 WPL6, ASME B16.9, SCH 80, BE – ASME B16.25, Seamless

150 NB EQUAL TEE, ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS

250 NB EQUAL TEE, ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS

300 NB EQUAL TEE, ASTM A 420 – WPL6 ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS

25NB EQUAL TEE, ASTM A105, ASME B16.11, CLASS 3000, SW - ASME B16.11, SEAMLESS

50NB EQUAL TEE, ASTM A234 Gr.WPB, ASME B16.9, S-80, BW-ASME B16.25, SEAMLESS

100 NB EQUAL TEE, ASTM A234 Gr.WPB, ASME B16.9, S-40, BW-ASME B16.25, SEAMLESS

25NB EQUAL TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW

50NB EQUAL TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW

100 NB EQUAL TEE, ASTM A234 Gr.WPB (Galvanised), ASME B16.9, S-40, BW-ASME B16.25, SEAMLESS

PIPE FITTINGS : Supplying &installation the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMS Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. Un Equal Tee

25NB x 20NB Reducing Tee, ASTM A420 WPL6, ASME B16.9, SCH 80 x SCH 160, BE, Seamless

50NB x 20NB Reducing Tee, ASTM A420 WPL6, ASME B16.9, SCH 80 x SCH 160, BE, Seamless

50NB x 25NB Reducing Tee, ASTM A420 WPL6, ASME B16.9, SCH 80 x SCH 80, BE, Seamless

80NB x 50NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-80, BE-ASME B16.25, SEAMLESS

100NB x 80NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BE-ASME B16.25, SEAMLESS

100NB x 50NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-80, BE-ASME B16.25, SEAMLESS,

150NB x 100NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS

150NB x 80NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BE-ASME B16.25, SEAMLESS

200NB x 100NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS

250NB x 100NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS

250NB x 150NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS

300NB x 150NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS

300NB x 200NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS

300NB x 250NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS

50NB x 25NB REDUCING TEE,A234-WPB, ASME B16.9, S-STD x S-80, BE-ASME B16.25, SEAMLESS

100NB x 50NB,REDUCING TEE, A234-WPB, ASME B16.9, S-STD x S-STD, BE-ASME B16.25, SEAMLESS

100NB x 80NB,REDUCING TEE, A234-WPB, ASME B16.9, S-STD x S-STD, BE-ASME B16.25, SEAMLESS

20NB x 15NB REDUCING TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE

25NB x 15NB REDUCING TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE

50NB x 15NB Reducing Tee, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE

50NB x 25NB Reducing Tee, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE

80NB x 50NB Reducing Tee, ASTM A234 Gr. WPB (Galvanized), ASME B16.9, Compatible with IS 1239 Part-I (Heavy Grade) Pipe, BE – ASME B16.25, Seamless

PIPE FITTINGS : Supplying & Installation the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMS Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. Reducers (Concentric)

25 NB X 20NB, CONCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-80 x S-160, BW-ASME B16.25 SEAMLESS,

200NB X 150NB, CONCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS

100NB X 80NB, CONCENTRIC REDUCER, ASTM A234 Gr.WPB, ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,

100NB X 65NB, CONCENTRIC REDUCER, ASTM A234 Gr.WPB, ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,

PIPE FITTINGS : Supplying & installation the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The fittings shall be as per ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5. Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. Reducers (Eccentric)

50 NB X 25NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-80 x S-80, BW-ASME B16.25 SEAMLESS,

150NB X 80NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS

150NB X 100NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS

250NB X 150NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS

300NB X 150NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS

300NB X 250NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS

300NB X 200NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS

25NB x 15NB ECCENTRICC REDUCER, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW

50NB x 25NB ECCENTRIC REDUCER, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW

100NB X 80NB, ECCENTRIC REDUCER, ASTM A234 Gr.WPB (Galvanised),ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,

150NB X 100NB, ECCENTRIC REDUCER, ASTM A234 Gr.WPB,(Galvanised) ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,

PIPE FITTINGS : Supplying & Installation the following sizes of Weldolet made of LTCS Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. Weldolet

40NB WELDOLET, ASTM A350 LF2, MSS SP 97, S-80, BW - ANSI B16.25

50NB WELDOLET, ASTM A350 LF2, MSS SP 97, S-40, BW - ANSI B16.25

80NB WELDOLET, ASTM A350 LF2, MSS SP 97, S-40, BW - ANSI B16.25

100NB WELDOLET,ASTM A350 LF2, MSS SP 97, S-40, BW - ANSI B16.25

PIPE FITTINGS : Supplying & Installation the following sizes of sockolet made of LTCS & CS Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. sockolet

15NB SOCKOLET,ASTM A350 LF2, MSS SP 97, CLASS 6000, SW - ANSI B16.11

20NB SOCKOLET, ASTM A350 LF2, MSS SP 97, CLASS 6000, SW - ANSI B16.11

25NB SOCKOLET, ASTM A350 LF2, MSS SP 97, CLASS 3000, SW - ANSI B16.11

25NB SOCKOLET, ASTM A105, MSS SP 97, CLASS 3000, SW - ANSI B16.11

15NB SOCKOLET, ASTM A105 (Galvanised), MSS SP 97, CLASS 3000, SW-ANSI B16.11

20NB SOCKOLET, ASTM A105 (Galvanised), MSS SP 97, CLASS 3000, SW-ANSI B16.11

25NB SOCKOLET, ASTM A105 (Galvanised), MSS SP 97, CLASS 3000, SW-ANSI B16.11

PIPE FITTINGS : Supplying & Installation the following sizes of FULL COUPLING made of CS/LTCS/GI Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. FULL COUPLING

20 NB, FULL COUPLING, SWE , ASTM A350 LF2, SW, CLASS 6000, ASME B16.11

25 NB, FULL COUPLING, SWE , ASTM A350 LF2, SW, CLASS 3000, ASME B16.11

20NB, FULL COUPLING, SWE , ASTM A105 , ASME B16.11 ,CLASS 3000

25 NB, FULL COUPLING, SWE , ASTM A105 , ASME B16.11 ,CLASS 3000

25 NB, FULL COUPLING, SWE , ASTM A105 (Galvanized),SW ,CLASS 3000, ASME B16.11

PIPE FITTINGS : Supplying & Installation the following sizes of CAP made of CS / LTCS/GI Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing. CAP

20NB, CAP, ASTM A350 LF2, THD, CLASS 6000, ASME B16.11

25NB, CAP,ASTM A350 LF2, THD, CLASS 3000, ASME B16.11

25NB, CAP,ASTM A105,SWE ,CLASS 3000, ASME B16.11

15NB, CAP,ASTM A105 (Galvanized),THD ,CLASS 3000, ASME B16.11

20NB, CAP,ASTM A105 (Galvanized),THD ,CLASS 3000, ASME B16.11

PROCUREMENT & SUPPLY & INSTALLATION OF NIPPLES

LTCS Nipple,Material: ASTM A333 Gr.6 Seamless, As per BS-3799, 100mm Long

20 NB, SCH.160, PLN-THD

25 NB, SCH.80, PLN-THD

CS Nipple,Material: A106 GR.B Seamless, As per BS-3799, 100mm Long

15 NB, SCH.80, PLN-THD, Galvanised

20 NB, SCH.80, PLN-THD, Galvanised

SPECTACLE Blind

25 NB SPECTACLE blind, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH

COLD INSULATION for product piping:Supply, fabrication, erection, testing and commissioning of cold insulation,outer layer vapour/moisture barrier and Aluminium cladding for the following items asTECHNICAL SPECIFICATION FOR COLD INSULATION DOCUMENT NO. W.004412-G-11077-P017. Note: 1. Insulation area shall be measured from OD of pipe with insulation thickness 2. 'Cost include insulation of pipe, fittings & flanges, valves, other components also.

15 NB pipe, insulation thickness 55mm

20 NB pipe, insulation thickness 55mm

25 NB pipe, insulation thickness 55mm

40 NB pipe, insulation thickness 55mm

50 NB pipe, insulation thickness 70mm

80 NB pipe, insulation thickness 80mm

100 NB pipe, insulation thickness 80mm

150 NB pipe, insulation thickness 90mm

200 NB pipe, insulation thickness 95mm

250 NB pipe, insulation thickness 100mm

300 NB pipe, insulation thickness 105mm

FIRE PROTECTION SYSTEM SCHEDULE OF SUPPLY RATES (AS PER TECHNICAL SPECIFICATION REQUIREMENT) SUPPLY ITEMS General Notes: a. All supply items shall be quoted as per technical specification & BoQ description for supply to site including charges towards TPI, packing & forwarding, loading, transportation, transit insurance, unloading, stacking at site. b. Third party inspection (TPI) for the supply items shall be in scope of successfull bidder. c. Approval of TPI agency to be engaged for inspection of material shall be obtained from IPPL on award of contract to sucessfull Bidder. d. Clearance of all materials shall be based on compliance to Technical Specifications, approved makes and as per agreed/approved Quality Assurance Plan (QAP) to be submitted by sucessfull bidder after award of contract for approval of IPPL.

PROCUREMENT & SUPPLY OF (MS) PIPES Supply of MS Black ERW Pipes confirming to IS 3589, Gr.410 ERW (Bevel end ) of following sizes.

PIPE, IS 3589 Gr. 410, 400NB, S-20, BE, ERW

PIPE, IS 3589 Gr. 410, 300NB, S-20, BE, ERW

Supply of MS Black ERW Pipes confirming to IS 1239 (Part-1) Heavy Grade (Bevel end for 50 mm & above, Plain end for 40 mm & below) of following sizes.

150 mm NB, Wall thickness 5.4 mm

100 mm NB, Wall thickness 5.4 mm

25 mm NB, Wall thickness 4.0 mm

PROCUREMENT & SUPPLY OF PIPE FITTINGS Note: The quantities given are only indicative. The actual quantities to be supplied will be based on the finalized drawing for pipeline routing, as per site requirements and to be approved by the site engineer.

400 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D

300 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D

150 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D

100 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D

25 NB, Elbow-90 Deg, B-16.11 , ASTM A 105, SW, #3000

25 NB, Elbow-45 Deg, Sch-M, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D

25 NB, Equal Tee, B-16.11 , ASTM A 105, SW, #3000

300 NB, Equal Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW

300 x 150 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW

400 x 300 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW

400 x 100 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW

300 x 100 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW

Supply of RF Flange, 125 AARH as per ASTM A105 DIM. ASME B16.5 Class 150 of following sizes

400 NB, Sch - STD-20

300 NB, Sch - STD-20

100 NB, Sch - STD-20

25 NB, Sch - STD-20

PROCUREMENT & SUPPLY OF MANUAL GATE VALVES (HAND WHEEL OPERATED)

25NB, BODY ASTM 216 Gr. WCB, TRIM-13% CR STEEL, B16.5, FLG-RF/125AARH, 150#.

PROCUREMENT & SUPPLY OF MANUAL BUTTERFLY VALVES (HAND WHEEL OPERATED)

400NB, BODY CS ASTM 216 Gr. WCB, TRIM-13% CR STEEL, B16.5, FLG-RF/125AARH, 150#.

100NB, BODY CS ASTM 216 Gr. WCB, TRIM-13% CR STEEL, B16.5, FLG-RF/125AARH, 150#.

Procurement & Supply of hose pipes, hose box, branch pipes & nozzles etc. as per relevant specifications including supply of studs-nuts & washers etc. All Items shall be covered in the unit rate quoted.

HOSE PIPE RRL hose pipe reel, 15 M long, 63 mm Dia as per IS 636 Type A, complete with male-female SS coupling as per IS 903 and material as per TDS.

HOSE BOX FRP hose box of size 750 X 600 X 250 mm with structural support for mounting the box at minimum 1 M above the ground level including grouting the post complete. Inside should be painted in white color Note: The fabrication & erection of hose box stand shall be measured & paid seperately under civil items.

BRANCH PIPE & NOZZLE Material conforming to IS 3444 Gr.4 / SS 316 branch pipe as per IS 903 with nozzle. Jet type nozzle, 10 Bar, 450LPM @7kg/cm2

Procurement & Supply of portable fire extinguishers as per relevant specifications including supply of brackets / fittings suitable for mounting on wall and a carrying handle of ample strength. Moreover,100% spare CO2 cartridges and 50% spare DCP bags shall be provided.

9 Kg DCP Fire Extinguisher (Gas Cartridge type)

4.5 Kg CO2 Fire Extinguisher

Sand Buckets with stand - 4 Buckets per set

SCHEDULE OF RATES FOR FABRICATION, ERECTION, TESTING & COMMISSIONING OF HYDRANT PIPELINE WORKS (AS PER TECHNICAL SPECIFICATION REQUIREMENT) ERECTION OF PIPING WORK (ABOVEGROUND & UNDER GROUND) The Erection includes erection of pipes, fittings, flanges, stud-nut, gasket, reinforcing pads etc. Transportation of all piping elements from storage point to work site/shop including, cleaning, stacking, prefabrication/ fabrication at shop and/or site, erection, joining by threading, bolting, welding, hydro testing, flushing and blowing, seal/leak testing and making ready for commissioning as per drawings, specifications, standards, codes, instruction of OWNER/OWNER's representative and scope of work defined in Tender. RM length for payment will be taken considering pipes & fittlings centre line. For Above ground piping complete with RCC support, flanges, nuts bolts , gaskets hydrotest, painting etc as per specification. Cost of RCC/Other supports will be paid separately as per civil SOR item. Item also incluses provision of Saddle/Corrosion plates on Fire Hydrant Pipe Lines over pedestals including cutting and fabrication of saddle plates from supplied MS pipes and welding of the same on pipelines under pedestals.

Radiography Note: 1. 4" wide film shall be used Upto 50 NB dia pipes. 2. 3” wide film shall be used above 50 NB dia pipes.

Installation of Pipes

PIPE, IS 3589 Gr. 410, 400NB, S-20, BE, ERW

PIPE, IS 3589 Gr. 410, 300NB, S-20, BE, ERW

150 mm NB, Wall thickness 5.4 mm

100 mm NB, Wall thickness 5.4 mm

25 mm NB, Wall thickness 4.0 mm

INSTALLATION / FIXING / ERECTION OF FLANGED / SCREWED/ WAFER TYPE/ SOCKET WELDED VALVES , STRAINERS OF ALL MATERIALS & ALL RATINGS Fixing supplied Carbon steel/ Stainless steel / GATE VALVE/ GLOBE VALVE/ NRV/ BALL VALVES/ BUTTERFLY VALVE/ CHECK VALVE / STRAINER / PSV of the following sizes on the pipeline including supplying and fixing 3 mm thk gaskets, nuts, stud bolts, washers of approved make, all leads & lifts etc., complete as per specifications and instructions at site. Note: a) Painting with approved make, colour, shade including colour coding as per specifications. b) The valves shall be supplied anywhere within the premises and the contractor shall undertake to lead the same to the foundations at no extra cost. c. Item includes supply & providing 8 SWG bare Cu wire for bonding between flanges for sizes up to & including 100 mm dia. for firefighting pipelines & 32mm - 50mm width Copper Strip (Thickness 3mm) for bonding between flanges for sizes above 100 mm dia.The job includes drilling of holes in the Cu strips for bolting purposes as per drawing, all leads & lifts etc., complete as per specifications and instructions at site. Transportation from OWNER/ VENDOR’S stores/storage points to shop/site, installation in position by threading, bolting or welding as per drawings, specifications, standards/ codes, instructions of Owner /Owner's representative and scope of work defined in NIT alongwith supply of necessary stud-nuts, washers, gaskets (with 100% SPARE QUANTITY). Rates shall also include the cost of supply of stud-nuts, washers, gaskets, supervision, labor, overhead /profits, materials in VENDOR's scope, Test wherever required, conditions listed in preamble to schedule of rates and other associated arrangements required to execute all the related activities.

UPTO 40 NB

50 NB to 100 NB sizes

150 NB to 400 NB sizes

FRP HOSE BOX Erection of FRP hose box of size 750 X 600 X 250 mm with structural support for mounting the box at minimum 1 M above the ground level including grouting the post complete. Note: The fabrication & erection of hose box stand shall be measured & paid seperately under civil items.

SCHEDULE OF RATES FOR COMPLETE WORKS (SUPPLY CUM EXECUTION INCLUDING COMMISSIONING ALL COMPLETE) (AS PER TECHNICAL SPECIFICATION REQUIREMENT)

HYDRANT VALVES, WATER CUM FOAM MONITORS ETC. ALONG WITH COMPANION FLANGES, STUD-NUTS & CONNECTING GASKETS Procurement, Supply, fabrication and erection of hydrant valves, monitors etc. including with necessary companion flanges of class 150 rating as per relevant specifications, gaskets (with 100% SPARE QUANTITY), studs-nuts & washers, RF Pad etc. All Items shall be covered in the unit rate quoted for the valves/monitors. SS GASKETS : IS 2712 Gr.W/3, 150#, Flat Ring ASME B16.21 STUD-NUTS : A193-B7 / A194-2H, 150#, ANSI B16.5/ B18.2 Heavy Hex

DOUBLE HYDRANT VALVE ON A SINGLE STAND POST Supply & fixing of two numbers single outlet landing valve of size 63 mm dia as per IS:5290, Type-A of SS material including supply and Installation of stand post of size 100 NB with pipe, elbow, cross, RF pad Plate (for pipe to pipe connection) and necessary fittings & flanges including connecting / welding / installing the same in hydrant. NOTE: The Hydrant valve shall be installed with 100 NB isolation butterfly valve. The cost towards supply & installation of butterfly valve and its companion flanges shall be paid under other items.

WATER CUM FOAM MONITORS Supply, installation, testing, and commissioning of water monitor having a discharge capacity of 2580 LPM at 6.8 bar, with a maximum rated pressure of 12 bar (175 PSI) and 75 mm (3") inlet size. The monitor shall be provided with a gunmetal nozzle (without pick-up tube) and complete with 150 NB pipe, elbows, reducer, RF pad plate (for pipe-to-pipe connection), and all necessary fittings and flanges. The scope includes connection, welding, and installation into the existing hydrant network as per approved drawings. NOTE: Monitor shall be installed with 100 NB isolation butterfly valve. The cost towards supply & installation of butterfly valve and its companion flanges shall be paid under other items.

SUPPLY & FIXING OF PRESSURE GUAGE Supplying and fixing 100 mm dia pressure gage (0-20 KSC) including supplying and welding necessary sockets on the pipelines including 3 way pressure differential valve, etc. complete and as per directions of site in charge. Sensing Element: Diaphragm, Casing: SS 316, Movement: SS 304, Glass: Shatterproof, Dial size: 100 mm, Over range Protection: 1.3 times the max. scale reading, Wetted Parts (including accessories): Minimum – SS 316, Accuracy: + 1.0 % of full scale, Up to + 2.0% of full scale for D.P.gauges, External Zero & span adjustment: Required, Accessories: Syphon for services above 75°C, Snubber for pump discharge applications, Chemical diaphragm for corrosive fluid lines, 2-valve manifold for pressure gauge & 3-valve manifold for differential pressure gauge

M.V.W SPRAY SYSTEM FOR AMBIENT AIR HEATING SHED Supply, shifting to site, laying, threading, welding, fitting, jointing, fabrication, erection, testing, painting and commissioning of MVW spray system, complete with Deluge Valve (Vertical), Nozzles, Detectors, GI pipes, pipe fittings, Valves, Strainers, flanges, nuts & bolts, clampings, structural supports as per technical specifcation/codal requirment, MVW Spray to give desired spray density. Activities Included in Unit Rate: 1) Supply, installation, testing & commissioning of Deluge valve (Vertical), MVW Spray Nozzles, Detectors, GI Pipes, Pipe fittings, Gate valves, Butterfly Valves, Basket type Strainer, Pressure relief valve, Ball valve, Non return valve along with pressure gauge in inlet and outlet of strainer (range shall be 0-25Kg/cm2, 150mm dial), flanges, nuts, bolts, washers, gaskets, sockolet, weldolets, consumables and paints as per technical specifcation requirement. 2) Transportaion, Unloading & shifting to site and storage. 3) Pre-fabrication, handling, cutting, edge preparation, ending, threading, tack welding and final welding as per technical specifcation requirement.. 4) Installation, alignment, field welding, field tightening as per technical specifcation requirement. 5) Supply, fabrication, erection of supports inclusive of U clamps, nut, bolt and special supports from truss/portal/Purlin members of sheds. 6) Supply and installation of spray, UL approved make complete with necessary fittings, teflon tape etc. 7) Hydro-testing as per technical specification requirement.. 8) Flushing and system leak test as per technical specifcation requirement. 9) Painting as per technical specifcation requirement. 10) Tag numbering of spray. All spray shall be provided with 2" circular identification metalic. Spray No. shall be written on tag by paint. 11) Submission of the residual engineering for the firefighting system — including fabrication layouts, equipment datasheets and general arrangement (GA) drawings, along with all related documentation — in full compliance with the requirements of the technical specifications, shall be within the supplier’s scope. The spray shall be properly clamped and bolted as per codes and standard. Pipes and other accessories like Hanger Supports and clamps etc. are to be painted as per the painting specification.

Supply, Erection, Fabrication, Installation, Testing, Painting and Commissioning of C.S. deluge valve system including its pnuematic trim and DV shall be auto reset type. Each Deluge valve system shall consist along with all necessary required trim (UL listed) as per technical specifcation requirement. Each Deluge valve system shall consist of following: a) Deluge Valve shall be vertical type. b) Pneumatically actuated flange type C.S. deluge valves. c) Pneumatic Air QB Detector, having burst temperature 79°C (Yellow colour), complete with necessary fittings, clips, and accessories as required for proper functioning, as per approved drawings and specifications. d) 25 NB GI heavy grade pipe alongwith forged screwed elbows, unions and other fittings for Trim assembly. e) Galvanized pipes shall be as specified in Piping Class, Galvanized pipes shall be only Hot Dip galvanized. f) Deluge valve trims, Test & drain trims, pneumatic trims, 15 NB ball valve sets for local operation of Deluge valve. g) Pressure gauge with 6" Dial Size with SS needle valve with necessary fittings & mounting. h) Supply & fixing of 3 Nos. 1/2" NPT (F) needle valve in instrument box for mounting 2 Nos. pressure Switch and 1 No. of solenoid valve and 1 No. ESD push button. i) Solenoid valve shall be normally open type,3/2 port SV, 230Vac, manual operation(in-built), Asco make. j) 15 mm MS ERW pipe, Heavy duty with required forged screwed fittings as required. k) Air filter regulator. l) Water motor gong along with inlet strainer, 25 NB piping and outlet pipe of 3 meter. m) Orifice plate of required size & fittings for mechanical interlocking with adjacent zones. n) Item includes installation and assembly of the deluge valve with the above mentioned components, supply of material, welding, making flange connections using gaskets (with 200% gaskets SPARE QUANTITY), studs-nuts & washers and necessary couplings, clamps and similar items as may be required including making connection with hydrant net work. o) Any accessories or items necessary to ensure the complete and proper operation of the deluge valve, even if not explicitly mentioned in the specification, shall be considered and supplied by the vendor without any price implication. p) Mechanical interlock both Deluge valve system Note: 1) No stub in / out connections are allowed, only standard fittings such as tees, weldolet, threadolets, Nipples, Coupling etc. shall be provided. 2) The cost of structural supports and hanger supports shall be measured and paid separately under civil items.

Ambient Air Heating Shed - 1 (29 Mtrs x 13 Mtrs), 150NB Deluge Valve

Ambient Air Heating Shed - 1 (23 Mtrs x 13 Mtrs), , 150NB Deluge Valve

Extension of MVW spray system from existing Deluge valve system as per Layout (10 meter x 8 meter)

Buffer Air Chamber (BAC) Supply and installation of buffer air chamber ( capacity same as per existing buffer tank, 2700mm length x 1 meter dia) with inlet, outlet, air vent, isolation valve, pressure relief valve, pressure gauge & pressure switch along with 3-way manifold, air filter regulator, snubber for deluge valve line, shell plate thickness 8mm, head plate thickness 10mm and complete with all accessories for proper operation.

SURFACE PREPARATION & PAINTING Complete supply of all the painting materials, transportation of materials to site, storage, providing necessary scaffolding, cleaning, surface preparation by blasting, application, testing and retouching with paints for piping, flanges, valves etc. as per IPPL painting specification, scope of work and directions of OWNER/ OWNER’S REPRESENTATIVE. The rate to include cost of all consumable, overheads and profits, labour and materials required for this job. Activities involved are : Grit blasting of surfaces, Primer application, Intermediate coat, Finish Paint coat. Touch-up shall be done after erection. The erected structural/piping/machineries surfaces shall be thoroughly cleaned before application of touch up and final paint. No separate charges shall be paid for rectifying the damaged surfaces during handling.

Surface preparation by grit Blasting- SA 21/2 Swedish Specification SIS 055900

Primer - Inorganic Zinc Silicate (DFT: 65-75µ), Intermediate Coat - HB Epoxy MIO (DFT: 65-75µ) & Finish Coat - Two pack Acrylic Poly-Urethane (PU) (DFT: 40-50µ/coat). Total Min DFT: 215 microns.

STENCILING AND LETTER WRITING OF NAME & RESPECTIVE CODE NO. ON EQUIPMENT / MACHINERY / PIPING AT ALL HEIGHTS AND SURFACES Complete supply of all the painting materials, transportation of materials to site, storage, providing necessary scaffolding, stenciling and Letter writing of name and respective code number in color paint letters/numbers. Stenciling shall be unbroken. Colour bands and ground colour for colour bands shall be as per codes or as per IPPL’s instructions. The above job shall be done as per directions of IPPL. The rate to include all consumable, overheads, labour and materials required for this job.

For Letter Sizes Up to 2 inch

For Letter Sizes 2" to 4 inch

DISMANTLING OF (MS) PIPES Disconnecting and dismantling the existing aboveground and underground pipeline, including excavation, breaking of enclosure walls, backfilling, and restoring the surface to its original condition. The scope shall also include disconnection and removal of all associated fittings, valves, strainers, filters, adjustable supports, and any other accessories, by gas-cutting or hacksaw cutting as required. Dismantling of brick masonry pedestals, if necessary, and stacking of all dismantled pipes and fittings at site as directed shall be included in the scope.

150 mm NB, Wall thickness 5.4 mm (Material: IS:1239 Gr. HEAVY)

Please Enable Macros to View BoQ information