TP1-80/23-24

Amount

Dismantling of existig Brick work, if necessary including cost all materials T & P Labour for Transpot lead, lift,etc complete.As department enigineer at site

Dismantling of existig PCC if necessary including cost all materials T & P Labour for Transpot lead, lift,etc complete.As department enigineer at site

Dismantling of existig RCC if necessary including cost all materials T & P Labour for Transpot lead, lift,etc complete.As department enigineer at site

Earth work excavation and depositing on bank with initial lead of 10m and lift of 2m in hard stiff clay, hard red earth shales, murram, gravel, stoney earth and earth mixed with small size boulders etc

Providing sand filling in foundation and basement including cost of sand, filling charges, watering and consolidation etc complete.

Providing PCC 1:3:6, using 40 mm HBG stone including cost of all materials watering and consolidation ,labour, lead, lift etc complete.

Providing raft concrete in RCC 1:1.5:3, using 12-20 mm HBG stone including cost of cement all materials, labour, lead, lift etc complete. Without form work

Providing raft concrete in RCC 1:1.5:3, using 12-20 mm HBG stone including cost of cement all materials, labour, lead, lift etc complete. With form work

Providing placing of steel reinforcements including cost of steel, binding wire, labour for cutting, bending, tying in position etc complete.

Providing PCC1:2:4 using 12to 20mm HBG metal including cost of all materials, labour, lead, lift etc complete. Without form work

Providing PCC1:2:4 using 12to 20mm HBG metal including cost of all materials, labour, lead, lift etc complete. With form work

Labour charges for assembling and re-fixing of template in correct position and alligenment for various equipment plinth and grouting the foundation bolt including cost of all material transport , labour,lead, lift etc, complete as directed by the dept. Engineer at site. (The templete will be make own arrangement by the contractor)

Fabrication and supplying of 20 mm dia Bolt and nut of specified length of 1mtr thareading for length of 10 cm at top and bottom L 15CM hot dip galvanising of bolt including supply of 2 nos of GI nuts and washers and fixing in the position as directed by the engineer at site including assembling of template cost templete all materials labour lead lift etc complete.

Supplying transporting and fixing of MS angles 50x50x06mm and 65x65x6mm inside the cable duct and breaker steps including labour cutting lead & lift painting with two coats enamal paint over primer coat with red oxide paint etc.

Supplying and fixing of approved quality MS rails (90 LBS)including costof all materials,labour,lead lift etc. complete.

Plastering with c.m.1:3, 12 mm thick for all exposed walls inside and outside including cost of cement, all materials, labour, lead, lift, curing etc complete.

Colour washing the plinths with 2 coats of shell lime mixed with color pigments, including cost of all materials, lead, lift, etc. complete in all respects

Supply and filling with quarry dust including cost of all materials, labour, lead, lift etc., watering & consolidation, etc., complete. As per directed by the engineer at site

Supply and Filling with Gravel including cost of all materials, labour, lead, lift etc., watering & consolidation, etc., complete. As per directed by the engineer at site

Supplying and spreading 20mm metal stone at yard area around transformer plinths duct including cost of all materials labour, lead, lift, etc., complete

Removal of surplus earth from the site and putting into low lying area outside the yard

Supplying and laying PVC pipe of 32mm dia10 Kg/Cm2 of approved quality and best make (Finolex or Equivalent) including fixing PVC pipe specials,elbow,tee and nipples with hole etc., including the cost of excavation,sand filling arround pipe,refilling and all materials, labour, lead, lift, T&P,etc,complete

Supplying and laying PVC pipe 25mm dia10 Kg/Cm2 of approved quality and best make (Finolex or Equivalent) including fixing PVC pipe specials,elbow,tee and nipples with hole etc., including the cost of excavation,sand filling arround pipe,refilling and all materials,lobour,lead,lift,T&P,etc,complete

Supplying and laying PVC pipe of 20mm dia 10 Kg/Cm2 of approved quality and best make (Finolex or Equivalent) including fixing PVC pipe specials,elbow,tee and nipples with hole etc., including the cost of excavation,sand filling arround pipe,refilling and all materials,lobour,lead,lift,T&P,etc,complete.

Supplying and fixing of 32mm dia GM gate valve ISI make including the cost of all materials,lead,lift,lobour,T&P,etc,complete.

Supplying and fixing of 25mm dia GM gate valve ISI make including the cost of all materials,lead,lift,lobour,T&P,etc,complete.

Supplying and fixing in possition of 20 mm dia PVC tap of approved make and quality conforming to is specification including the cost of all materials,lobour,lead,lift,etc., complete.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

J.Rajalakshmi

MK DHANALAKSHMI ENGINEERING PRIVATE LIMITED

K DHINAKARAN