Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹13.1 L+₹25,653.68 (1.99%)Rejected-Finance | L2 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 3 | L3₹13.2 L+₹28,910.02 (2.24%)Rejected-Finance | L3 | Rejected-Finance HIGHER THEN L1 BIDDER | |
| 4 | L4₹13.5 L+₹62,957.48 (4.88%)Rejected-Finance NEAR PAYAL CINEMA P O SEVOKE ROAD SILIGURI 734 001 | DARJEELING | WEST BENGAL | 734001 | L4 | Rejected-Finance HIGHER THEN L1 BIDDER |
Tender Value
₹12.5 L
EMD Value
₹26,000
Closing Date
21 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
HQ 136 WORKS ENGINEERS PIN - 914136 C/O 99 APO
COMPREHENSIVE MAINT/REPAIR OF STAND BY E AND M INSTALLATIONS ALLIED WORKS UNDER AGE (I) DARJEELING
2022_MES_554202_2
CWE/136-WE/37 OF 2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Darjeeling
Class E, Category b(ii)
8 documents required · 8 mandatory
₹500
AGE (I) Darjeeling
₹26,000
10 Feb 2023
28 Oct 2022
22 Nov 2022
28 Oct 2022
21 Nov 2022
8 Nov 2022
28 Oct 2022 - 1 Nov 2022
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5mtr in depth for foundation. (Laying of under ground cables) in soft/loose soil and getting out all as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil all as directed.
Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5mtr above the starting point all as directed.
M&L for sand cushioning for protection of PVC cable with approved sand of uniform thickness, laid dry, by filling in trenches and punning to proper required cover all as directed.
Supply and laying of fly ash bricks of best qualitylaid flat equal to width of bricks, perpendicular to UG cable over the dry sand cushioning, for cable protection as directed by Engineer-in-Charge.
Dismantling/Taking out old unserviceable service connection cable/underground cable, of any grade/type of size as below from pole/wall/cable duct/underground trench etc, all as specified as directed by Engr-in-Charge
Supply and laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed of following sizes:-(Note:- Excavation & earth work and pipe / sand / bricks for cable protection shall be measured and paid for separately under appropriate item of this schedule): -
70 Sqmm 3.5 Core
25 Sqmm 4 Core
10 Sqmm 2Core
M&L for 50mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall/pole/road crossing for protection of underground cable complete all as directed..
M&L for 40mm dia steel tubes (light grade) galvanised with fittings, laid in trenches/wall/pole/road crossing for protection of underground cable complete all as directed..
M&L for cutting existing road/hard standing not exc 20x30 cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well ramming watering finish suraface 10 cm from top using PCC 1:3:6 (40mm graded crushed aggregrate); including removal of surplase soil complete all as directed.
M&L for preparation of old painted surfaces of Steel Tubular pole upto 9/11 mtr long by scarping old paint and applying Single coat of Aluminium paint including numbering of pole with black oil paint and painting the base of the pole in alternate black and yellow stripes each 30 CM apart up to 1.5 Mtr height all as directed by Engineer in Charge.
Supply & fix in Replacement street light fitting LED type 90 watts with Pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and including driver unit etc and taking down old unsv any size/watt of security light all as directed .
Supply & Fix in Replacement LED not less than 120W Flood light fitting ,IP65 protection and including driver unit etc and taking down old unsv any size/watt of flood light all as directed .
M&L for Multistandarded Copper Conductor cable of 3 Core 1.5 Sq mm size drawn through steel tubular poles for interconnection of cable looping box to Street Light Fitting, Post Top Lantern & etc taking down old unsv cable all as Directed.
S & F On Load changover switch (4 pole) 200A
S & F On Load changover switch (4 pole) 100A .
S& F in repair MCCB 250A 4 Pole, 25 KA in existing panel all as specified and directed.
S& F in repair MCCB 200A 4 Pole, 25 KA in existing panel all as specified and directed.
S& F in repair MCCB160A 4 Pole, 25 KA in existing panel all as specified and directed.
S & F steel tubular swaged poles type 410 SP-31 complete with cast iron base plate , finial taper plug, bolts, nuts and screws (09 M long) for mounting LED Security light fittings all as specified and directed.
Supply and fix stay assembly using GI stay rod 16 mm dia complete with stay plate mild steel of size 300x300x6.00mm thick, stay bow complete all as specified and shown in Electrical Plate No 1 . (loop type insulator, stay clamps, excavation and concrete measured separately) complete all as specified and directed.
Supply and fixing loop type insulator large size porcelain vitreous of size 90 x 140 mm clearence of hole 25.5mm complete all as specified and directed.
Supply and fix lightening arrester non liner type confirming to IS No 3070 part I complete with all fittings, transmission class discharge capacity 10 KA suitable for 11 KV including making connections with over head line with ACSR conductor complete on poles all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone agrregates as in pedestal of pole/ strut and in copping including necessary form work and finishing exposed faces of concrete even and smooth using extra cement all as directed by engineer in charge.
M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate in foundations of poles,filling and mass concrete complete all as specified.
Material and labour for spreading /Loose filling with aggregates of gauge 40-80MM mm size, evenly inSwitch Yard or power house complete all as specified and directed.
Supply and laying on wall, floor and Ceiling PPR water tubing medium grade (PN-16) ISI marked incl all types of fittings and accessories of size 63mm complete all as directed..
M&L for outdoor type Busbar Chamber fabricated by CRCA sheet 3.15mm and 60mmX60mmX6mm angle iron frame with front and back side opening with locking arrangement suitable for 600 Amps aluminium Busbar 415 Volts, 3 phase, 4 wire AC supply system mounted on DMC insulators of size 750mmX500mmX350mm , painted using powder coating technology complete all as specified and directed.
M&L 75mm thick PCC PCC 1:3:6 type C2 (40mm graded agg) as in floor finish in plinth protection, hardstanding, PCC Path etc, even & smooth without using extra cement completed as as specified and as directed
M&L 100 mm thick PCC 1:4:8 nominal mix type D2 (40mm graded agg) as in foundations, fillings and mass concrete complete all as directed.
M&L for providing 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as directed.
M&L for factory made chequrered cement concrete coloured tiles 20Cm x 20 Cm x 25mm thick, set jointed and pointed in neat cement slurry in floor as in floor, paving and steps etc with grey cement and pigments complete all as directed..
M&L cutting holes in brick walls exc half brick but not exc one brick build in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete all as directed.
M&L for PCC 1:3:6 type C1 as in hold fast blocks incl necessary form work complete all as directed.
M&L for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, forged into spikes barred iron doors conforming to Fe 290 Gde-E-165 complete all as directed.
M&L for preparation of new steel surfaces of any description over 10 Cm width or girth & applying one coat of synthetic enamel paint of any tint complete all as directed.
M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strip 32 x 6 mm as earthing lead by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 5 of SSR part I including necessary excavation and earth work GI pipe 40mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to HT/LT poles/panel board as indicated including testing complete.
Taking out centrifugal pump only from foundation including opening with coupling from motor 5 HP and transporting from pump house to Siliguri workshop for repair complete all as directed.
Dismantling of 5 HP centrifugal pump of Make Kirloskar opening, veryfying, inspecting by Engineer-in-Charge and placement of existing damage parts and cleaning, reconditioning, polishing, cutting, machine work, Iboringalignment or shaft etc and reassembling of pump and spray painting including placement of all nuts, bolts, washers and gaskets (Note: spare parts shall be measure and paid separately under relevant item as supply only)
Supply only impeller for 5 HP centrifugal pump complete all as directed.
Supply only bearing for 5 HP centrifugal pump complete all as directed.
Supply only shaft for 5 HP centrifugal pump complete all as directed.
Supply only cupling for 5 HP centrifugal pump complete all as directed.
Transporting of Centrifugal pump 5 HP from Siliguri Workshop to Pump House and installation including testing complete all as directed.
Dismantling of 5 HP motor and removing of burnt out winding cleaning including rewinding with all insulating materials, varnishing, heating, reassembling, painting including testing after completion incl transportation of 5 HP motor from pump house to Siliguri workshop for repair complete all as directed.
Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/ amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected.
GEETA CONSTRUCTION
Darjeeling Enterprises
Janata Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .