Proposed renovation of Kitchen Department, ground floor, Service Block, TMH, Parel

Amount

Civil

Electrical

Description of Work / Item(s)

Amount

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

For thickness of tiles above 25 mm and up to 40 mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Of area beyond 3 sq. metres

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

CEMENT PLASTERING:Cement plastering for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls or concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site Including scaffolding curing etc. complete all as directed by Engineer in charge ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) 12 mm thick for wall

Providing and laying vitrified wall tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (size, shade should be get approved by concerned engineer in charge.)

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

MAKING HOLE : in concrete / brick masonry of required size (approx. 0.3 x 0.3) and refilling it with 1:2:4 concrete / brick work with plaster c.m. 1:4 neeru or sand face finish curing including cost of all materials labour etc. Disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised.

In concrete

In brick work

NAHANI TRAP:Providing and fixing 100mm dia CI heavy duty Nahani trap with brass C.P. dome type heavy duty jali all as approved make quality as specified and directed and with all necessary allied works. a) In sinks on way / two ways lead covered joints P.C.C. encasing with C.P. Jali 4” to 5”

Providing and fixing bacalite of approved shade / make sheet door shutter with frame (aluminium ) required size and of approved colour frame made out from Rectangular / H / A section of 14 gauge 15 micron anodized / powder coated 20mm x 40mm zindal section with aluminium hinges / SS hinges, handles / knob /aldrop tower bolt / all locking arrangement etc. all as per specification and directed by the engineer in charge. Single leaf shutter with powder coated aluminium frame (Heavy duty)

Ball Valve TBS make

FANCY STOP COCK: Providing 15mm dia C.P. brass fancy stop cock weighing not less than 600gm of approved make and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and testing the joint hydraulically to a pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified and directed. (SEIKO make)(work includes removing old fitting and fixtures and handing over the same.)

FANCY FITTINTGS : Providing 15mm dia C.P. brass fancy fittings weighing not less than 600gm RMC approved make (latest) and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 kg / CM2 and rectifying the leaky joints if any complete as specified & directed for the following. (work includes removing old fitting and fixtures and handing over the same.)

Bib tap fancy (SEIKO )

Fancy angle stop cock SEIKO make

Hand spray with PVC connection mahindra make ( 1 mtr.long)

Butterfly jet jaquar make ( Cat. No.551)

Fancy Bib tap two in one Sieko make

E.W.C.:Providing and fixing european water closet suits wash down pattern best Indian make in white glazed vitreous of Hindware/Parry ware/cera with integral ‘P’ or ‘S’ trap as per approved make with left or right vent in position including fixing it on chair bracket or wall bracket with necessary C.P. brass screws & plugs etc. complete all as directed by the engineer in charge. Wall Mounted EWS "ULTRA" white colour

WASH BASIN : Providing & fixing best quality wash basin of approved colour & size with following items as specified.Providing & fixing white / colour glazed vitreous china ware wash basin of make Hindware with semi punched tap holes for fixing the tap in different position in the basin, mounting the set over a suitable C.I. bracket etc. as approved by & Fixing 32mm size C.P. / PVC brass/ a bottle trap with extension piece wall flanges (heavy quality) jointing with white Zinc & Spun yarn & fixing 15mm dia PVC water inlet connection of required length with C.P. brass unions at end & fixing 32mm dia C.P brass heavy quality waste coupling with C.P. brass ball chain & rubber plug & fixing 15mm C.P brass fancy stop cock including cost of jointing materials etc. as per requirement & Fixing C.P. brass 15mm dia fancy pillar tap or approved pillar tap of make,BMC approved including cost of jointing materials etc. Testing the entire system to the full satisfaction of the engineer in charge wash basin model No.10001/10004 of hindware. Parryware/Cera WHITE COLOUR 630mm x 450mm

E.W.C. SEAT COVER :Providing & fixing approved quality & make solid plastic seat of approved colour with C.P. brass pillar hinges etc. complete all as directed by the engineer in charge.Hindware/ Parryware seat cover standard. Solid type for European water closet. (White colour)

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the wallsand floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern

MIRROR ;Providing and fixing in position bevelled or plain edge mirror / ghost free image made out of best Indian glass 5.5mm thick of approved make, copper coated with approved colour PVC frame with wall mounting arrangements washers rawl plugs etc. complete of following sizes and as directed by the engineer in charge.(work includes removing old fixtures also) 600mm x 450mm

SOAP DISPENSER :Providing C.P. brass heavy quality liquid soap dispense C.P. push type brass brackets caps etc. and fixing in position with brass screws including providing and fixing rawl plugs in the wall and redoing the walls etc. all complete.(Jaquar /Plumber make) (work includes removing old fixtures also)

REMOVING OLD FITTINGS:Removing existing rusted damaged / defective flush tank wash basin / urinals / sinks / E.W.C. and I.W.C. etc. all internal fitting either new or retaining existing arrangements etc. complete all as directed by the engineer in charge.

REMOVING G.I. PIPE : Labour charges only for removing C.I. / G.I. pipes for any size with all fittings etc. complete as and when required and as directed by the engineer in charge. Removing G.I. pipe any dia

P.V.C. PIPES: Drain Line - Providing, laying, jointing, fitting testing heavy quality PVC pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by engineer in charge.

Providing, laying, jointing, fitting & testing CPVC pipe SDR of heavy quality following dia for cold water distribution system of approved make (Prince, finolex, Supreme, make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings to make totally water proof joint with necessary testing etc. complete all as per specified and directed by Engineer in Charge. (work includes removing old fixtures also)

Providing & fixing heavy quality C.P connection 15mm n.b. inlet connection with all brass unions at the ends as per site requirement and as directed by the engineer in charge. (work includes removing old fixtures also) size 600mm long

Providing and fixing in position aluminium openable window shutter with frame fully glazed / aluminium grills with using 5.5mm thick glass sheet of approved make and quality plain / frusted / bajari glass of approved make Triveni / Shri Vallabh /J / A/ G/ pilkinten fixed with aluminium beeding channels with two way rubber gasket / PVC lining to ensure water tightness and no rattling for aluminium grill fixing with F channel beeding using satin finish anodized 15 micron jindal approved havey duty sections for shutters and frame of required size and sections including using aluminium / S.S. hinges of required size of Archies make, tower bolt of required size of Archies make , C type aluminium handle for shutter of Archies make and other necessary hardware as per requirement etc. complete all as per specified and directed by Engineer in charge..(including mosquito net shutter) Alumn. fixed window with powder coated

S.S Angles (2mm) 50 x 50mm thick

SS (304) Floor Drainage Grating with outer housing frame and garbage strainer - Outer Housing :- SS (304) 30 x 30 x 3 mm angle outer frame Grating:- SS (304) 25 mmsquare pipe x 16 Swg thick outer frame, having SS (304) 20 mm Square pipe x 16 swgthick welded at centre distance of 38 mm removable type Strainer:- SS (304) 16 Swg perforated sheet filter as garbage strainer 50 mm deep with lifting handle (Sizes may vary as per site conditions)

White washing with lime to give an even shade : Old work (two or more coats)

Providing&applying one/two coats of primer two coats of paint as mentioned below of approved make First quality sian Paints(Apcolite) / Nerolac/ Dulux to the required colour scheme and as per manufacturers instructions/specifications to the walls, beams, columns, ceilings, partitions ,doors etc. including removing existing paints, nails ,screws, battens etc. and thoroughly scrapping the surface withs and papers filling up crevices and levelling with putty of Asian make necessary to obtain smooth surface ie.complete surface preparation etc.complete as directed to the entire satisfaction of Engineer In-charge. With two coats of primer and two coats of paint

Using Luster paint

Using synthetic enamel paint (Oil Paint)

Removal of old formica along with the adhesive making the surface smooth and providing and fixing new approved of required specification and colour etc. complete as specified and directed including fevicol, nails etc. complete. 1.00 mm thick

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Structural steel work: at all levels including supplying cutting fabricating welding or bolting erecting and fixing in position including painting with a primary coat of approved steel primer, including cost of materials labour with chasing in wall or embedding in floor and making good the same by filling 1:2:4 cement concrete and plastering if necessary all as specified and directed by engineer in charge. (Jindal ,Sail,Vizac make)

GRANITE: Providing and laying 18-20mm thick granite slab in required size and approved colour as per approved sample 1st quality for lift architraves / dado / flooring / sills / platform / sink / with all exposed edges machine cut double machine polished (mirror polish) laid over a bedding of cement mortar 1:3, 35mm thick in true plain curing finishing the joints making holes for wash basin / sinks coupling in slab if required etc. complete including making grooves in walls for fixing and making good the surface (excluding cuddapah platform) colours – Black/Red/Grey. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

CUDDAPAH :Providing & laying 25-30mm thick cuddapah stone slabs in platforms / sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

Providing / Fabricating, fixing SS table (grade 304, 18 guage) of required size along with all ncessary accessories i.e undershelves, backlash, heavy duty caster wheel etc. 1) Square pipe legs 40mm x 40mm x 3mm with rubber bushing at bottom. 2)Angle frame below table top 25mm x 25mm x 3mm all sides and also at intermediate as required. 3) Table top made up of SS plain sheet smooth finish of grade 304 along with granite table top etc. as directed by engineer incharge. (3'x3'x3')

Providing & fixing C.P. Long body bib tap Seiko Make etc. complete.

GULLY TRAP ;Providing & fixing in position best glazed stone ware gully trap with 150x150mm sq. inlet and 100mm n.b. outlet conforming to IS 651 including embedding the trap in 1:4:8 Cement concrete 150mm x 150mm GI grating at top, construction of brick masonry chammber 300mm x 300mm (internal) in 230mm thick brick masonry embedding the trap plastering with cement mortar 1:4 20mm thick on inside and all exposed faces finished with a floating coat of neat cement, providing & fixing CI frame and hinged cover weighing not less then 7 Kgs painting the grating frame and cover with 2 coats of approved bitumastic paint etc. complete

INSPECTION CHAMBER :Providing & making inspection chamber of size 0.90 mtrs x 0.450 mtrs internally of required depth as per requirement including excavation of soil P.C.C. 1:4:8 bedding for base 230mm thick brick work for inspection chamber in 1:6 prop. Cement mortar plastering to be done by water proof plaster in 1:4 proportion & finishing all sides base with neat cement by using water proofing compound from both sides including drain line in chamber for frequent water / drainage flow with required gradient etc. complete as specified & directed by engineer in charge .(work includes removing old fixtures also) 0.6m x 0.6m x 0.9m

WATER PROOF PLASTER:Cement plastering for internal walls 20mm thick in two coats backing coat 15mm thick in cement mortar supplying 1:4 second coat 5mm thick in cement motar 1:4 and finished with neat cement finish / over brick or concrete surfaces at all floors and levels in quantities adding water proofing compound of 2% by weight of cement as required at site including hacking of concrete surfaces scaffolding curing etc complete all as directed by engineer charge. (General used in drain line, chambers etc.) ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. )

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25 mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20 mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20 mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge :

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface including disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.

REPLACING SANITARY FITTING:Removing existing damaged non workable sanitary fittings & replacing with new approved fittings as per site requirement & directed by engineer in charge Waste Coupling C.P. brass heavy quality waste coupling of 50mm dia for wash basin

Flexible pipe of 1¼” dia of required colour upto 3 ft. (900mm)

Providing and Fixing following thickness Bison Board pannels for Boxing, partition works including necessary hardware and adhesive etc. complete. 8 mm thick

P/F Aluminium partiion with 2" x 2" other various size section of heavy qualityJindal make & heavy duty with all necessary allied works & materila as directed by Engineer-in- charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

15 mm nominal dia Pipes

20 mm nominal dia Pipes

25 mm nominal dia Pipes

PCC 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Description of Work / Item(s)

Amount

CHAPTER 1 - POINT WIRING :- Point wiring for light/fan/bell with ISI mark 3 x 1.5 sq.mm (P+N+E). FRLS PVC insulated copper conductor of Polycab / RRK /Finolex in surface/ recessed heavy class pvc casing capping/conduit of Presto-plast/sunwood /Precision make with Modular switch of Legrand-Myrius/MK-Blenze & Anchor make-ceiling rose/batten holder/slanting holder Boxes etc. with circuit labling/marking/ferruling complete.

Primary point upto 4 mtrs length

Primary point length 4 mtrs to 7 mtrs

Primary point length 7 mtrs to 10 mtrs

Secondary point Extending from Primary point upto 4 m

Half point on same board with 5A S/W and 5A Socket.

Fan point with 100W - step regulator upto 4 meter

Fan point with 100W - step regulator 4 to 7 meter length

Fan point with 100W - step regulator 7 to 10 meter length

Concealing of 25mm dia. Pipe with surface finish.

Concealing of 6"X 6" Box or lower size with surface finish.

Concealing of upto 12"X 12" Box with surface finish.

DISMANTLING & REPAIRING :- Providing qualified Wireman and a helper with tools for carrying out assigned jobs day to day Maintenance such as repairing / dismantling the existing light, fan, bell, independent plug point wiring of all types with accessories and cable /switchgear in an approved manner as per instruction of Engineer Incharge ( reqd materials will be provided by TMC)

Supply & Installation of White Colour Legrand-Myrius Series /MK-Blenze Series Accessories as below

Blank plate -1 module

Supply & installation of surface Board Legrand-Myrius/MK-Blenze (inclusive of back box, surface plate & wiring)

6Amp Switch&Socket

6A socket-2 nos+6A switch 2 nos

16Amp Socket + 16A Switch with Indicator

2 nos 16 amp socket 2 nos 16 amp switch

Telephone Outlet with telephone I/O, back box and face plate in all respect (without telephone wire)

Supplying and fixing on wall PVC sun wood /prestplast heavy duty boards of following size

4inch x 4inch

4inch x 7inch

6 inch x 8 inch

8inch x 10inch

CHAPTER 2 - SUB MAINS Mains :- Providing Heavy duty PVC casing-caping/conduit of Precision make. Supplying and erecting mains with copper conductor PVC insulated FRLS of 1100 V AC grade Polycab/RRK/Finolex make wire with circuit labling/marking/ferruling complete.

2 x 1.5 sq mm -+ 1.5sqmm Earth wire

2 x 2.5 sq mm -+ 1.5sqmm Earth wire

2 x 4 sq mm -+ 2.5 sqmm Earth wire

Supply and Fixing Rigid PVC conduit Medium Mechanical Stress (MMS) with all fitting & fixing accessories Precision make

Supply and Fixing PVC Flexible Conduits Poly Proplyne (PP) with all fitting & fixing accessories Precision make

Supply and Fixing PVC Casing Caping with all fitting & fixing accessories Precision make

1inch dia 25mm x 12mm

1inch dia 25mm x 16mm

Supply and Fixing of PVC Trunking /covering of following sizes

100 x 50 mm PVC trunking

50 x 50 mm PVC trunking

38 x 25 mm PVC trunking

Supply, Installation, testing & commissioning of LT/Siemens make DOL starter with Sheet-Steel Enclosure

10 HP with Single Phase Protection MN 16

CHAPTER - 3 PVC/XLPE CABLE :- Armoured cables - supplying, laying, testing and commissioning of 1100 V AC grade PVC FRLS insulated ISI mark Poly- cab/RRK/Finolex Copper Conductor cable erected on wall,ceiling,column etc with appropriate size of GI spacers & saddlers screws etc complete in approved manner of following size . .

3 x 4 sq mm copper

4 x 6 sq mm copper

Supplying, erecting, testing and commissioning of 1100 V AC PVC FRLS armoured 3 1/2 core Aluminium Conductor cable of Polycab/RRK/Finolex make erected on wall/beam/ceiling/shaft etc with appropriate size, along with saddlers,spacers complete with approved manner of following size . .

3 1/2 x 35 sq mm

Cable Glands - Double Compression with Termination:- Supplying and erecting heavy duty flange type brass cable glands for armoured cable with brass washers,rubber rings complete erected with cable ends & leads connected with proper size lugs.Make Comet/Braco/Dowells.

2 to 4 core 2.5/4/ 6 sq mm

3 to 4 core 10 sq mm

3 to 4 core 25-50 sq mm

Cable Lugs :- Supplying & erecting crimping type Copper lugs confirming to IS standard suitable for cables upto evenly crimped with high pressure tool and connected to switch gear terminals with brass /cadmium plated nut bolts in an approved manner and other accessories.Make Dowell

Supplying & erecting crimping type Aluminium lugs confirming to IS standard suitable for cables evenly crimped with high pressure tool and connected to switch gear terminals with brass /cadmium plated nut bolts in all approved manner.

Flexible Cables:- Supplying, fixing of following flexibles copper conductor 1100 V a.c. grade cables Polycab/RRK/Finolex make with proper connection at both the ends as directed by Eng --in -chrg.

1 x 16 sq mm

1 x 25 sq.mm

Earthing :- Supplying,installation of copper strip /bare wire of earthing system on wall /slab/column/beam along with clips etc including end connections with crimping type copper lugs complete in all respected and as directed by Eng-in-charge

14 SWG copper bare wire

Replacement of ELMAX/CONNETWELL make connector block suitable for following cable sizes and reconnection of the cable leads each phase.

CHAPTER - 4 : LIGHT Fixtures Supply,installation,testing and commissioning of fixtures on wall/beam/slab by means of bracket ,anchor fastener suspended from slab/beam by means of 19 mm dia conduit pipe/down road,ball and socket arrangement,flexible twisted wire/ flexible cable connection etc and GI chain for recessed mounting fitting complete in all respect as directed by Engg. in charge and Philiphs make or any other approved make as per instructions of EIC.

Batten 4ft for LED tube Philips/Wipro/Crompton/Osram/Bajaj make.(As Approved by EIC) without Tube

Batten 2ft for LED tube Philips/Wipro/Crompton/Osram/Bajaj make.(As Approved by EIC) Witout Tube

LED Battens

EnduraLED Batten - BN108C LED 40S PSU CDL WH

EnduraLED Batten - BN108C LED 20S PSU CDL WH

TMC 501 P 1xT-LED 22W P3241-Mounting rail for TLED lamps.(without Lamp)

TMC 501 P 2xT-LED 22W P3241-Mounting rail for TLED lamps.(Without Lamp)

Erection/fixing & commissioning of departmently supplied fluorescent fixtures on

PVC square box and duly connected with necessary hardware & leads and connector etc.

Pair of down rods MS Conduit (inner dia - 16mm, outer dia - 20mm & 2mm thickness) pipe upto 24 inch long with ball socket etc complete

Ceiling Fans, Wall Fans, Exhaust Fans, Pedestal Fans -Supply, fixing & commissioning ceiling fan white/brown coloured including Safety Chain for Ceiling Fans for providing secondary support and heavy gauge down rod as per site condition. High breeze/high speed make : Crompton.

Exhaust fan 225mm Metal Body Heavy Duty TransAir Almonard/Crompton make

Exhaust fan 300mm Metal Body Heavy Duty Almonard/Crompton make

Exhaust fan 450mm Metal Body Heavy Duty Almonard/Crompton make

Energy Efficient Ceiling Fans -Supply, fixing & commissioning ceiling fan white/brown coloured including Safety Chain for Ceiling Fans for providing secondary support and heavy gauge down rod as per site condition. Atomberg EFFICIO make.

Size 900mm

FAN HOOK

Double anchor fastener heavy duty with GI clamps

Supply fixing down rod of GI class 'B' pipe of (inner dia - 16mm, outer dia - 20mm & 2mm thickness) with threading,boring etc with necessory hardware & accessories for ceiling fans.

Storage Water Heater/Geyser:- Supply, installation, testing and commissioning of Recold make Altro 2 model make heater along with all accessories complete vertical / horizontal with 5 star mark. Vertical Models

25 Lts CDR SP 5 star rating

50 Lts CDR SP 4 star rating

Horizontal Models

25 Lts CDR SP 3 star rating

50 Lts CDR SP 3 star rating

CHAPTER 5 : Distribution Boards Supply, installation, testing & commissioning DBs for mounting MCB/ELCB/Isolator - on wall complete.

SPN 12 way IP 43 with Metal door

TPN VTPN 8 way IP 43 with Metal door

TPN VTPN 12 way IP 43 with Metal door

TPN VTPN DPX3 160 8 way IP 43 with Metal door

TPN VTPN DPX3 160 12 way IP 43 with Metal door

SITC of Legrand DX3 make AC C Curve MCB of following sizes in provided enclosure and connected with leads on incoming and outgoing side duly completed in approved manner.

6 to 32 A SP MCB 10 KA

40 to 63 A SP MCB 10 KA

6 to 32 A TP MCB 10 KA

40 to 63 A TP MCB 10 KA

40 to 63 A 4 P MCB 10 KA

80A 4 P MCB 10 KA

100A 4 P MCB 10 KA

125A 4 P MCB 10 KA

Metal Encloser for DP/TP/FP MCB

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Providing ,fixing and commissioning of Legrand DX3 make RCBO

40A DP - 300 mA

63A DP - 300 mA

25A/32A FP - 300 mA

40A FP - 300 mA

63A FP - 300 mA

Cable end box for IP 43 DBs

SPN 12WAY DB

For all VTPN MCB DB

For All VTPN DPX MCCB DB

Moulded Case Circuit Breakers :- Providing and erecting moulded case circuits breakers complete erected in provided enclosure and connected with leads on IC and OG side duly completed in an approved manner L&T Make D-sine Range 3 pole + Neutral link + Spreader Terminal

DN0-100D* 16-100Amp 36kA

Providing and fixing of SS Enclosures for MCCB L&T make

SS Enclosure for MCCB DN0

Providing ,fixing and commissioning of Legrand DPX MCCB DPX 160 MCCB 36kA

4P 100A DPX 160 MCCB

4P 125A DPX 160 MCCB

4P 160A DPX 160 MCCB

Providing ,fixing and commissioning of Direct/Extended Rotary Handle for MCCB

For DN0 MCCB Direct

For DN0 MCCB Extended

CHAPTER 6 - Telephone Wiring :- Supplying and laying 0.5 mm gauge unarmoured telephone wire D.O.T approved, make Dlink/Finolex/Digilink/Polycab through exisitng conduit/casing caping/cable tray.

Boxes - MS sheet to be used for fabrication of boxes, panel,cable end boxes,boards etc including cutting,bending, drilling,welding,riveting etc and painting one coat of red oxide and 2 coats of gray enamel paint etc complete.

S&C hylam sheet of 3 mm thick to be used for covering MS boxes etc including cutting,drilling,fixing with nut bolts/ screws cup washers etc complete as required and to the satisfaction of incharge with making necessary groove/ cutting for fixing electrical accessories.

Installation of fly catcher on beam / slab by means of bracket made out of 25mm x 3 mm strip and 2 nos 6 mm anchor fastener complete in all respect as directed by Engineer incharge

M/s Ankur Associates (BID ID -3274429)

M/s Ankur Associates (BID ID -3274429)

M/s Ankur Associates (BID ID -3274429)