Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹55.0 LAccepted-AOC B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹58.7 L+₹3.5 L (6.32%)Rejected-Finance | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹60.6 L+₹5.3 L (9.68%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹62.4 L+₹7.2 L (13.0%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹63.4 L+₹8.2 L (14.9%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
2 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIRS TO ROLLING SHUTTER GATES ETC AT ZONE 4 5 AND PERIODICAL SERVICES AT MWC MMT L5 CG COMPLEX NMRL AND OTHER AREA UNDER AGE B R II GE (NW) KUNJALI COLABA MUMBAI
2023_MES_606456_1
8568/CWE (NW) Mumbai/E81
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.7 L
Yes
23 Sept 2023
28 Jun 2023
4 Aug 2023
28 Jun 2023
2 Aug 2023
19 Jul 2023
28 Jun 2023 - 17 Jul 2023
Amount
Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed by Engineer-in-Charge.
-Ditto- as per Item No.1 .00 above but area of shutters exc 10 sqm and n.exc 20 sqm each complete all as specified and directed by Engineer-in-Charge.
-Ditto- all as per srl item No.1.00 but area of shutter exc 20sqm each complete all as specified and directed by Engineer-in-Charge. Note for Srl Item No. 1 to 3 (i) Supply only parts for srl item No. 1, 2 & 3 shall be measured and paid separately
Supply and Fixing factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated mild steel (hardened) helical wire spring of size 400mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters as fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair mild steel pressed beval handles 150mm long, oval type, enamelled black complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing mild steel safety lever lock with 4 levers for rolling shutters complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and for easy operation for shutters complete all as specified and directed by Engineer-in-Charge. Note :- For purpose of measurement and payment EACH TIME greasing and easing in position shall be considered.
Supply and Fixing for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and directed by Engineer-in-Charge. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
Material and Labour for greasing and easing in position of mild steel rolling shutters of area exc 20sqm each for full movement and for easy operation for shutters complete all as specified and directed by Engineer-in-Charge. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
Material and Labour for preparing new or previously untreated surface of any description over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparing old painted surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing plain aluminium sheeting, alloy 31000H4, 1.25mm thick as in covering to door shutters etc, cut to size, edge beads punched including rivets with plain 40mm joints including bending turning up, mitred angles, stopped ends, outlets etc, as required as in repairs complete all as specified and directed by Engineer-in-Charge.
Dismantling structural steel works in doors, gates etc but excluding framed truss etc complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing rolling shutter with ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear box,etc gear operated type with chain wheel and hand chain and one shop coat of primer erected in position complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing rolling shutter without ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, push pull or manual type and one shop coat of primer erected in position complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing for capacity n exc. 14 HP single phase for Motorised shutter incuding all accessories. complete all as specified and directed by Engineer-in-Charge.
Extra for wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing mild steel framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing collapsible steel gates, top hungs consisting of channel pickets, provided flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets complete all as specified and directed by Engineer-in-Charge.
Material and Labour for old surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof at any height including scaffolding complete all as specified and directed by Engineer-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish of the premises complete all as specified and directed by Engineer-in-Charge.
Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons complete all as specified and as directed
Material and Labour for 20 mm thick granite machine cut as in steps, window cills, cooking platform, working table etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. (colour of granite will be decided by the GE/Engr-in-Charge).
Material and Labour for 20 mm thick granite machine cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. (colour of granite will be decided by the GE/Engr-in-Charge).
Material and Labour for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Material and Labour for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Material and Labour for 150mm wide strip of makrana white marble 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting , polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Material and Labour for 20 mm thick green marble machine cut, bedded jointed and pointed with grey cement slurry with pigment to match the shade including cutting , polishing and 20 mm thick screed bed/backing coat in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situations complete all as specified and directed by Engineer-in-Charge.
Material and Labour for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floor finished even and fair complete all as specified and directed by Engineer-in-Charge.
Material and Labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement & pigment confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed by Engineer-in-Charge.
Material and Labour for machine pressed precast concrete inter locking paver block any shape and size with grey cement & pigment confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed by Engineer-in-Charge.
Material and Labour for machine pressed chequered cement coloured tiles of size 250mmx 250mmx 20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and directed by Engineer-in-Charge.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repair 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work/metal Frame Work complete all as specified and directed by Engineer-in-Charge.
Ditto all as ser No 54.00 above but 9mm thick. complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 4mm thick bakelite sheet with decoratie choice laminated on both side complete all as specified and directed by Engineer-in-Charge.
Removing of bldg materials exc 5 KM but not exc15.00 KM and depositing where directed outside MoD land complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs white glazed earthen ware vitreous china wash hand basin of size 630x450 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe 600mm etc complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing under counter wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as specified and directed by Engineer-in-Charge. Make - Jaquar CAT PART NO- CNS-WHT-705.
Supply and Fixing counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as specified and directed by Engineer-in-Charge. Make _ Jaquar CAT PART NO- ALS-WHT-85601
Supply and Fixing 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed by Engineer-in-Charge.
Supply only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing 32 mm dia WHB/urinal flexible waste pipe complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs CP towel ring square with round flange (Make - Jaquar CAT PART NO -CAN-1121N) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs CP towel rail 600 mm long with round flange (Make - Jaquar CAT PART NO -CAN-1111NM) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Jaquar) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs CP Pillar cock taps 15 mm bore with lift type operating knob and base flange Make - Jaquar CAT PART NO- FLR-5015 complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs CP bib cock 15 mm bore (Make Jaquar CAT PART NO- FLR-5047N) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs CP angular stop cock with wall flange of 15 mm bore (Make - Jaquar CAT PART NO- FLR-5053N) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system ( Make- Jaquar CAT PART NO- OHS-1989) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and directed by Engineer-in-Charge.
Material and Labour brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
Material and Labour for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4 complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster of any description hacking for key, racking out joints and scrubbing down with water etc to receive plaster and removing debris outside MD land incl necessary scaffolding complete all as specified and directed by Engineer-in-Charge.
Material and Labour Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish on walls complete all as specified and directed by Engineer-in-Charge.
Material and Labour Plastering 5mm thick in CM 1:3 on concrete surfaces as in ceiling finished even & smooth without using extra cement in ceiling complete all as specified and directed by Engineer-in-Charge.
Material and Labour rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound to be measured and paid for separately) complete all as specified and directed by Engineer-in-Charge.
Supply only integral water proofing compound complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of old painted wooden of any description over 10cm width or girth and applying one coat of synthetic enamel paint incl necessary scaffolding complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down including applying applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge.
Material and Labour for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint) complete all as specified and directed by Engineer-in-Charge.
Providing and applying double layer with Chowgule Koster dachflex super crack sealer for repairing the cracks of the external wall areas complete all as specified and directed by Engineer-in-Charge. MAKE: Chowgule Koster (I) Construction Chemicals Pvt. Ltd (or as approved by GE)
Material and Labour preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% on external surface as per manufacturer instruction complete as specified and directed by Engineer-in- charge.
Material and Labour for preparation of old wall/ ceiling surfaces and applying two coat of leekage / seepage resistant chemical with necessary scaffolding for G+9 bldgs etc all as specified and as directed by Engr in-Charge. Note : Applying second coat after 24 hours or as prescribed by the manufacturer instruction. Make : Asian Paint( Smart Care damp block 2K / Smart Care Hydro Loc), Dr Fixit, Berger (or as approved by GE)
Material and Labour for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge.
Complete removal of existing treatment on ceiling surfaces and applying two coats of oil emulsion distemper over a coat of primer on ceiling surfaces incl preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
Material and Labour Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scaffolding for high rise bldgs upto G+9 floor. complete all as specified and directed by Engineer-in-Charge.
Material and Labour preparation of old decorated surfaces of walls, soffits, roof facia and applying one coat of weather proof acrylic based paint (100% acrylic) with necessary scaffolding for high rise bldgs complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of newly plastered surfaces of wall, soffits, facia roof and applying two coats of weather proof acrylic based paint (100% acrylic) over one coat of cement based primer with necesssary scaffolding for high rise blds upto sixth floor complete all as specified and directed by Engineer-in-Charge.
Material and Labour for preparation of old plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed by Engr-in-Charge.
Material and Labour for preparation of old plastered surfaces of wall and applying two coats of white wash, complete all as specified and as directed by Engr-in-Charge.
Material and Labour preparation of new plastered surfaces and applying three coat of white wash on ceiling complete all as specified and as directed by Engr-in-Charge.
Complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down with water etc and applying two coats of plastic paint over a coat of primer complete all as specified and as directed
Ditto All as per item No -102.00 above but one coat complete all as specified and directed by Engineer-in-Charge.
Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material and labour for gently cleaning the surface of the stone masonry and piers with specialized water misting techniques employing air water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone surface without over wetting, followed up by gentle brushing with soft nylon brushes as specified and milded. Gentle surface cleaning may include using water misting and PH balanced surfactants as specified for indicated areas to remove surface dirt grit surface accretions, lime wash painting etc by means of water misting and PH balanced surfactants and cleaning complete complete all as specified and directed by Engineer-in-Charge. Note :- Quoted rate shall be inclusive of removing vegeration on wall surfaces, chajjas etc and errection and dismantling of MS tubular double scaffolding upto 35 mtr height and provision of necessary safety equipments to the skilled workers to carry out work.
Satyanarayan Trading Co.
Shree Ayyappa Engineering
Nilesh Construction
MADHU ENTERPRIZES
siddharth and company
Advait Enterprises
Genius Construction Co.
jalandhara construction
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .