Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹15.0 L+₹49,912.60 (3.45%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹15.9 L+₹1.4 L (9.60%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹34,000
Closing Date
2 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL DHANU KUMAR RAI
GARRISON ENGINEER DAMAN TAT RAKSHAK VIHAR DALWADA NANI DAMAN POST DAMAN (UT) PIN 396210
ADDITION/ALTERATION AND SPECIAL REPAIRS TO DSC GALLEY/ COOK HOUSE AND DINING HALL (P-16) AT ICGAS DAMAN
2022_MES_526759_2
8626/E8
Open Tender
Civil Works
Item Rate
180 days
ICGAS DAMAN
Class E category a(i)
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER DAMAN
₹34,000
11 Oct 2022
26 Jul 2022
5 Sept 2022
26 Jul 2022
2 Sept 2022
19 Aug 2022
Amount
Demolition of plain cement concrete unreinforced in ground floor and paving above or below any thickness and removal of debris out side from MD land etc complete all as specified and directed.
Demolition/Taking down of existing water proofing treatment of any description and in any position, inculding taking down of cement plaster etc complete all as specifed and directed
Taking down door/ window shutter with frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted.
Taking down door/ window shutter with frame without taking off shutters from frame of any description n.exc. 1.50 Sqm each etc complete all as specified and as direted.
Refixing door/ window in same opening shutter with frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted.
Taking down shutter only of any description exc 2 sq. m each etc complete all as specified and as direted.
Taking down shutter only of any description exc 1 sq. m and n exc 2 sq. m each etc complete all as specified and as direted.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 including demolition of old brick work built in any mortar complete all as specified and as directed.
M&L for Hard core with broken stones or boulders of gauge n.exc 63 mm spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface etc complete all as specified and as directed.
M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subase including necessary formwork and finishing the surfaces to receive floor finish etc complete all as specified and as directed.
S & F Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm matt finish as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM (1:4) as in backing coat including dismantling of old tiles complete all as specified and directed.
S&F for glazed ceramic coloured tiles 350x250x7mm/ 450x350x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM (1:4) as in backing coat including dismantling of old tiles complete all as specified and directed.
M&L for mirror polished Kota stone 15 to 20 mm thick hand cut to size 430mm x580mm in floors set and jointed in neat cement slurry and pointed in coloured cement with and including 20 mm thick CM (1:6) bedding concrete etc including dismantling of old stone slabs /tiles complete all as specified and as directed.
M&L for grinding & mirror polishing existing kota stone flooring all as specified and as directed.
M&L for machine cut cudappah stone slab 20-25mm thick as in shelves set and jointed in neat cement slurry including rubbing and polishing etc including dismantling of old stone slabs /tiles complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups spacers and binders cut to length bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
M&L for Reinforced Cement Concrete (design mix) in cement concrete M-30 (using 20 mm graded stone aggregates) as chajja etc.
Use and waste of formwork as in Chajja, troughs and similar items including edges complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete including taking down exesting cement plaster of any description all as specified and directed.
M&L for rendering in CM 1:4, 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with 3% water proofing compound in finishing coat and finishing the surface even and fair complete including taking down exesting cement plaster of any description. (Note :- WPC will be measured and paid seperately).
Supply only integral WPC all as specified & directed.
M&L for preparation of newly plastered surfaces and applying one coat of wall primer to the surfaces and finally applying two coats of oil bound distemper, complete all as specified and as directed.
M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of weather proof acrylic emulsion paint over a coat of acrylic primer etc complete all as specified and as directed.
M&L for preparation of existing painted surfaces of walls, chajjas,parapets etc and applying one coat of acrylic exterior paint (Brand Apcolite Apex manufactured by Asian Paints or equivalent as approved by GE), as per the manufactures instructions and as directed , removing the loose materials and filled with crack sealing compound of approved make if necessary including scaffolding etc complete all as specified and as directed.
M&L for complete removal of existing treatment and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer etc complete all as specified and as directed .
M&L for standard aluminium section "heavy grade" powder coated of approved colour as in sliding windows, Ventillators, partitions and doors frames, shutters of required sizes including, rubber gasket, PVC wheel with ball bearing, concealed type lock and fixing of glass complete all as specified and directed. Make of aluminium section - ''Jindal/ Indalco/ Hindalco. (Note: (i) The measurement shall be recorded weight of aluminium section only and rate quoted shall deemed inclusive of rubber gasket, rubber beading, PVC wheel with ball bearing, concealed type locks, handle etc (ii) Glass shall be measured and paid separately as supply only.
S&F 5.00 mm thick float glass including sticking of 50micron solar control film fixed in aluminium sliding window shutters etc complete all sas specified and directed.
S&F Solar controlled film 50 micron reflective type sticked to glass as per instructions of manufacturers all specified and directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width op aperture 1.40mm and fixed with aluminium wire staples etc complete all sas specified and directed.
S&F aluminium anodised XPM grill aluminium alloy DG 202 grill 4.8 mm thick (in the shape of expanded metal of aluminium XPM jalli) opening size 59mm (length expansion) and 45 mm (width expansion) fixed in and including E/H frame all as per manufacturers instruction and as directed.
S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought framed, rebated on the solid,single or double rebate rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as direted.
M&L mild steel of gde Fe 410-0 as in hold fast fixed to steel/wood door/widow frames including tarring and sanding etc complete all as specified and as direted .
M&L for 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side.
M&L for preparation of new wood surfaces of any description exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed.
M&L three coat of white wash including preparation of old ceiling plaster surfaces complete all as specified and directed.
S&F stainless steel butt hinges medium weight 100mm size etc complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, length of bolt 200 mm, complete all as specified and as directed.
S&F aluminium, anodised, barrel tower bolts of extruded section and fixed, length of bolt 100 mm, complete all as specified and as directed.
S&F aluminium alloy, anodised, sliding door bolit with hasp, staple & fixed clips of sheet, cast or extruded section and fixedbolts of length of bolt 300 mm, complete.
S&F extruded aluminium handles fabricated type, anodised and polished etc complete all as specified and directed 150mm size, fabricated type, anodised .
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm.
S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mmx330mmx160mm, complete all as specified.
S&F, in repairs 15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed.
S&F in repairs 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed.
S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.
M & L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite.
M&L for 15mm thick screed bed in CM (1:4) laid on roof surfaces mixed with itegral water proofing compound @ 3% by weight of cement, including finishing the surfaces even and smooth without using extra cement. (Note: WPC shall be measured and paid separately at supply ratesall as specified and directed.
M&L for WPT to non accessible RCC roof slab/chajja/canopy/parpet etc to be executed surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive Shalitex primer @300 gms/sqm for laying 3.00 mm thick super thermolay (APP modified membrane with polyster reinforcement) 3.6 Kg/Sqm laid by torch application method and 75mm overlap in longitudinal direction and 100mm in transverse direction, a coat of silver shield (solar reflective aluminium paint) @ 0.12 Kg/Sqm all as per mfgs instructions etc complete all as specified and as directed. Make- Tikitar, STP texas, Shivam Hyperplast, Pidelite all as specified and directed.
M&L for suspended false ceiling with aluminium powder coated frame work (snap grid) of size 595 x 595 mm with runners with aluminium main T section 35x25x1.50 mm and cross T section 25x25x1.50 mm and aluminium angle 25x25x1.50 mm fixed along side of walls with wooden plug and hanging grid with adjustable J hook and 4 mm dia GI wire suspenders fixed to slab/truss including 12 mm thick mineral fibre insulation board/tiles of size 595 x 595 mm (Make - Armstrong or equivalent ) complete all as specified and directed.
Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modular switches , sockets,fan regulators etc.including modular plate cover of required size with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed for One light point/ Fan Point controlled by one switch.
Supply & fixing modular type switch 6 Amps ,1way,1 module complete all as specified and directed.
Supply and fix ceiling rose, 3 terminal, PVC/Polycarbonate body, complete all as specified and directed.
Supply and fix ceiling fan , 1200 mm sweep, single phase, 230 volts, five star rated white in colour complete with all accessories such as down rod (required length at site),blades, fan regulator, shackle clip, canopy and making cable connections complete all as specified and directed by Engr-in-charge.
Supply & fix in repair recess mounting high lumen LED slim panel 2'X2' 36Watt, white powder coated CRCA housing with highpower LEDs , aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver,LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed.
Nilesh Construction
Nakshatra Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .