Loading
Loading…
Loading…
Tender Value
₹3.7 Cr
EMD Value
₹7.3 L
Closing Date
14 Oct 2026, 1:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
NIT
15 conditions · 4 needing a document upload
As per PREAMBLE CLAUSE No. 11.2 of Tender Document:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure- VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
ELECTRICAL CONTRACTORS LICENSE:- The contractor shall fulfill valid Electrical Contractor License requirement as per IE Rule 1956 clause no- 45. Electrical Contractors license shall be submitted along with the offer, failing which the offer will summarily be rejected.
Technical Eligibility Criteria: As per clause 11.1 of Preamble and Scope of Work of uploaded tender document Page no. 4 & 6.
SIMILAR NATURE OF WORK: The contractor should have executed, "Electrification / Rewiring of Service or Residential building/Yard / HT/LT Substation work / HT/LT cable work / Street lighting / Platform or building lighting management / circulating area Lighting/ Electrical overhead power supply work / Electrical pump work etc."
23 conditions · 9 needing a document upload
All the supporting DOCUMENT(S)/CERTIFICATE(S) of as a proof Technical and Financial credentials as detailed in this tender Document, has/have been attached.
Supporting DOCUMENTS/CERTIFICATES as detailed in this Tender Document has been attached.
The Bid Security shall be deposited either in cash through epayment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of bids.) (See clause 1.10 of Chapter-I of Tender Document)
All the bidders / tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law. (Copy of GST registration certificate)
Copy of PAN CARD
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Improvement of lux level, replacement over aged LED fittings, Outdoor light fittings, Flood lights, highbay fittings, street pole at various locations of Mumbai Division.
BB-LG-W-KYN-2026-03~CR
BB-LG-W-KYN-2026-03
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹7.3 L
22 Sept 2026
22 Sept 2026
30 Sept 2026
69 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 3,66,52,711.74 | ||
| — | Item Breakup for | details. | — | ||
| (1) Supply, fixing, testing & commissioning of outdoor type LED tube light luminaires 2 x 18W (each 20W maximum), 4 ft long, weather proof having IP65/66 protection, system efficacy greater than or equal to 110 lm/W, luminaires must be capable of delivering minimum 4000 lumens, luminaires complete with all accessories and other specifications. | — | — | — | 88,69,885.44 | |
| — | Item Breakup for | details. | — | ||
| (2) Supply, erection, testing and commissioning of 2 x 2 36 W LED fitting with IP 20 complete with connection and necessary fixing arrangements as per site requirement. | — | — | — | 19,39,455 | |
| — | Item Breakup for | details. | — | ||
| (3) Supply, installation, testing, and commissioning of 18-20 Watt, 4-feet slim LED batten fitting with high-lumen output, inbuilt driver, glare-free diffuser, and extruded aluminium housing, including aluminium framing, wiring, and connections as per site requirements, complete in all respects. | — | — | — | 15,31,995 | |
| — | Item Breakup for | details. | — | ||
| (4) Supply, erection, testing and commissioning of 9-10 W LED (2 ft) slim fitting complete with fixing arrangement, etc. | — | — | — | 1,14,005 | |
| — | Item Breakup for | details. | — | ||
| (5) Supplying and erecting integrated LED flood/ outdoor/street light fitting Max. 85- 90 W including driver with U shaped bracket as per specification | — | — | — | 23,27,196 | |
| — | Item Breakup for | details. | — | ||
| (6) Supply, erection, testing and commissioning of 240-245 Watts LED flood light luminaries complete with fixing arrangements | — | — | — | 25,34,590.5 | |
| — | Item Breakup for | details. | — | ||
| (7) Supply, erection, testing and commissioning of 150-155 W flood/outdoor/street light fitting with high lumen LED, heat sink, driver and other accessories. | — | — | — | 21,59,850 | |
| — | Item Breakup for | details. | — | ||
| (8) Supply, erection, testing and commissioning of 200 Watts LED highbay light luminaries complete with fixing arrangements | — | — | — | 31,18,335 | |
| — | Item Breakup for | details. | — | ||
| (9) Supply, erection, testing and commissioning of 135-150 W LED Highbay light fitting with high lumen LED, heat sink, driver and other accessories. | — | — | — | 18,93,540 | |
| — | Item Breakup for | details. | — | ||
| (10) Supply, erection, testing and commissioning of 62W LED lowbay light fitting with high lumen LED, heat sink, driver and other accessories. | — | — | — | 14,30,000 | |
| — | Item Breakup for | details. | — | ||
| (11) Supply, installation, testing and Commissioning of High Hot dip galvanized octagonal pole with longitudinal seam weld throughout the length complete with one arm for fitting installation and J type foundation bolt set complete in all respect with RCC foundation.q | — | — | — | 11,85,650.4 | |
| — | Item Breakup for | details. | — | ||
| (12) Supply, erection, testing and commissioning of 16 meter high mast system with its accessories including design and casting of suitable foundation with M20 concrete for high mast towers as per Railway's specification. | — | — | — | 9,89,564.96 | |
| — | Item Breakup for | details. | — | ||
| (13) Supply and laying of GI perforated cable tray of size 300 mm x 50 mm x 2 mm Thick | — | — | — | 7,53,840 | |
| — | Item Breakup for | details. | — | ||
| (14) Supply and fixing of GRP / FRP cable tray made of glass fiber reinforced polyester moulding composite material, size 200mm width x 75mm depth minimum, 04mm thick minimum, including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc | — | — | — | 6,67,310 | |
| — | Item Breakup for | details. | — | ||
| (15) Supply, erection, testing and commissioning of timer panel board as per railway's requirement | — | — | — | 3,73,310.8 | |
| — | Item Breakup for | details. | — | ||
| (16) Wiring of the conduit Light point with all accessories | — | — | — | 15,80,400 | |
| — | Item Breakup for | details. | — | ||
| (17) Wiring of the concealed Light / fan/call bell point with all accessories. The switches shall be of modular type. | — | — | — | 1,75,636 | |
| — | Item Breakup for | details. | — | ||
| (18) Wiring of the concealed Universal plug point on separate switch board with all accessories. The switches shall be of modular type. | — | — | — | 19,197 | |
| — | Item Breakup for | details. | — | ||
| (19) Wiring of the concealed 5A/ 5-Pin Universal plug point (2 plug & 2 switch on separate board) with all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type | — | — | — | 15,822.6 | |
| — | Item Breakup for | details. | — | ||
| (20) Wiring of concealed 15 Amps wall socket point complete on separate switch board with all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type. | — | — | — | 17,744.2 | |
| — | Item Breakup for | details. | — | ||
| (21) Wiring of the concealed 5A/ 5-Pin Universal plug point (4 plug & 4 switch on separate board) with all accessories. The switches shall be of modular type. | — | — | — | 17,369.8 | |
| — | Item Breakup for | details. | — | ||
| (22) Wiring of light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core etc. | — | — | — | 72,789 | |
| — | Item Breakup for | details. | — | ||
| (23) Wiring of Universal plug point on switch board with all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type. | — | — | — | 3,383 | |
| — | Item Breakup for | details. | — | ||
| (24) Wiring of the 5A/ 5-Pin Universal plug point (4 plug & 4 switch on separate board) in PVC casing / capping. The switches shall be of modular type. | — | — | — | 21,825.6 | |
| — | Item Breakup for | details. | — | ||
| (25) Supply, running, fixing and stringing of OHE mains of 5 line wire | — | — | — | 6,44,100 | |
| — | Item Breakup for | details. | — | ||
| (26) Supply, running, fixing and stringing of OHE mains of 3 line wire | — | — | — | 1,39,775 | |
| — | Item Breakup for | details. | — | ||
| (27) Supply, laying, running fixing of following sizes of XLPE insulated, PVC sheathed, 1.1 KV grade cables as per IS. (a) 4 core 50 sq.mm AL conductor, armoured (b) 4 core 16 sq.mm AL conductor armoured (c) 4 core 10 sq.mm AL conductor armoured (d) 3 core 06 sq.mm AL conductor, armoured (e) 4 core 10 sq.mm CU conductor, armoured (f) 4 core 4 sq.mm CU conductor, armoured | — | — | — | 24,98,046 | |
| — | Item Breakup for | details. | — | ||
| (28) Supplying and erecting PVC insulated PVC round sheathed FR 3 core 1 sq.mm flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV | — | — | — | 1,50,000 | |
| — | Item Breakup for | details. | — | ||
| (29) Supply, erection, testing and commissioning of FRP junction box as per Railway's requirement. | — | — | — | 4,97,630 | |
| — | Item Breakup for | details. | — | ||
| (30) Supply & erection of earthing G.I. pipe with cement concrete earth chamber, charcoal, salt, etc. | — | — | — | 3,16,036 | |
| — | Item Breakup for | details. | — | ||
| (31) Supply, erection, testing and commissioning of GI strip of 25 mm x 5mm | — | — | — | 1,79,675.44 | |
| — | Item Breakup for | details. | — | ||
| (32) Supply, erection, testing and commissioning of maintenance free earthing | — | — | — | 2,48,737 | |
| — | Item Breakup for | details. | — | ||
| (33) Dismantling/Removing and Rerouting of existing aluminium conductor armored with clamping and by removing M. S. cable clamp. | — | — | — | 79,440 | |
| — | Item Breakup for | details. | — | ||
| (Thirty Four) Dismantling of existing erected MS Tubular pole/Rail pole including removing of cross arm bracket with insulator, overhead conductor complete in all respect as per direction of Engineer in charge at site. | — | — | — | 86,577 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCCApril2022.pdf
ATTACHMENT
GCCACS1to12.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
SpecificationEarthingRDSOSPN197Ver1.pdf Maintenance Free Earthing
ATTACHMENT
RDSOTechCircularofHighMast.pdf
ATTACHMENT
TenderBookofLuxlevel.pdf
ATTACHMENT
SpecificationEarthingRDSOSPN197Ver1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .