Construction of Fire and Rescue Service Station building and Office building at Palavoyal Village, Redhills in Thiruvallur District (Chennai Sub urban)

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

7.2) Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3m

b. T.W. below 2 m length.

25) M.S.Holdfast

31) Weathering course

37.1) White washing 3coats (slaked)

39) M.s Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

55.2) Flat Back Urinal

Electrical arrangements 69) 15 Amp. Power plug

74) Charges for fixing of "Fan"

86) Anti termite treatment

238) Anticorrosive treatment for steel grills

ANNEXURE 2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.1) P.C.C. 1:2:4 for Foundation & Basement and other similar works

3.8) P.C.C. 1:4:8 using 40mm hard broken stone jelly

6.2.3) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.4.2) Standardised concrete Mix M25 Grade Concrete a. In Foundation and basement

b. Stilt / Ground Floor

c. In First Floor

d. In Second Floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor / Stilt floor

b. In First Floor

c. In Second Floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor/stilt floor

c. In First Floor

d. In Second Floor

11.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

14.3.I) Precast Cupboard slab 20 mm tk.using standardised concrete mix M25 a. In Stilt / Ground Floor

b. In First floor

14.3.II) Precast Cupboard slab 40 mm tk.using standardised concrete mix M25 b. In Stilt / Ground Floor

c. In First floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

18.9) Double centering

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

21.5.2.3) Supplying and fixing of PVC Sliding Door with Roller

21.5.6) Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1.200m x 2.100m (single leaf)

21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 0.900 m x 2.100m (Single Leaf)

21.5.6.2) Supplying and fixing of solid core flush door shutter of thickness 35mm a) Door size 1.80 m x 2.10m (Double leaves)

22.3.9) Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick.

23.5.4.2) Supplying and Delivery of Godrej Navtal / equivalent lock with keys of approved make (ISI) a) 6 lever lock with 3 keys

26.1) Flooring in C.C.1:5:10

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2) Plastering in C.M. 1:5, 12mm tk

35.3) Spl. Ceiling plastering in C.M. 1:3, 10mm tk.

43.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.3.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit

b) Augering 30cm dia

44.6) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.2.1) Providing precast Kerb stone in C.C. 1:3:6, 450 x 300 x 150 mm

50.5.1) Supplying, Fabricating and erection of M.S Scheme Name board

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (Above G.L) a. 32 mm dia

b. 25 mm dia

52.2.2) Supply ,laying & jointing the following UPVC pipes as per ASTM D 1785 of schedule 40 with UPVC Specials (Below G.L) a. 40 mm dia

52.4) 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

52.9) Supply and fixing of following dia MS clamp set including transportation charges. a) 40mm dia M.S clampset

53.4) S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

54.1.1) S & F of 15mm dia half turn CP long body tap

54.2.1) S & F of 15mm dia half turn CP short body tap

56.3.2) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.2) S & F of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) S & F of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4) Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places..

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Electronic Dimmer

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

78.4) Earthing as per the ISI specification with an earth electrode of 2.1 mtr class 'B' GI pipe

79.4.1) Supplying and fixing of 63 Amps Triple pole main switch

79.9) 1 Nos.of 32Amps - Fuse Unit

80.2) 450 x 375 x 20 mm thick TW plank

81.1) Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work

82.3) Supply and fixing of LED road way lightiing luminaries a) 30W LED

84.3) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

93.1.1) Plastering with CM 1:3, 12mm with WPC

98.5.1) TW double leaves shutter with brass fittings of size a) 2000X2100mm.

112.1) S & F of Exhaust Fan 225mm dia

171.1.2) Labour charges for the erection of submersible pumpset in borewell/ openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth. Upto 5HP

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS 8034/2002 without Panel Board of capacity a) 50LPM x 100m (Three phase)

175.2.3) Supply and fixing of 4 way triple pole and neutral MCB Distribution board sheet steel enclosure

175.2.4) Supply and fixing of 8way single pole and neutral MCB Distribution board sheet steel enclosure

207.3.1) Providing two coats of Plastic Emulsion paint including primer for inner walls

207.3.8) Providing two coats of Exterior Emulsion paint including primer for outer walls

213) Supply and fixing of SFRC manhole cover a. 600mm x 600mm

238.1) Anticorrosive treatment for window grills

255.7.2) Supply and fixing of LED bulb suitable for fixing it to pendent / backlite battern holder a) 9 watts LED

344.2) S & F of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.2) Concrete designer tiles flooring

361.2.1) Vitrified Tiles (Ivory) 600 x 600 x 8mm flooring in C.M 1:3

365.1) Supplying and fixing stainless steel hand rails for staircase

367.1) Providing wooden Melamine polish for new wood work

374.4.4) S & F of Granite slab of size 4'x2', 18 to 20mm Thick for platform (Ruby Red) C.M 1:3, 20mm tk a. In Ground floor

b. In First floor

382.4.1) Supply and fixing Urinal partition of granite slab 18 to 20mm thick both side polished

383.3.1) Providing single nosing to the edges of Granite slab of 18 to 20mm thick at wash basin.

450) Supply and fixing of 160 mm dia PVC end cap for borewell

451.4) Supply and fixing of CP two way Bibcock with Health faucet of approved quality with ISI mark

456) Supply and fixing of oval shape wash hand basin of size 560x450mm

504) Supplying and delivery of 12 mm thick nylon rope

609.6.1) Supply and delivery of 150mm OD PVC casing pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.2) Supply and delivery of 150mm OD PVC Ribbed screen pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) a) 150mm dia PVC casing pipes assembly.

615.3.2) Supplying, delivery and fixing of MS fabricated DOL panel control board with ISI mark for three phase a) 4 HP

616.1.6) Supply and Delivery of mono block pumpset of 2 HP

616.2) Labour charges for the erection of Monoblock pumpset of 2 HP

616.4.3) Supplying and fixing the following dia HDPE pipes of approved make a. 40 mm dia HDPE 10 Kg/cm2 pipe

619.7) Supply and fixing of following size of Ball valve of approved quality a. 32 mm UPVC ball valve

b. 25 mm UPVC ball valve

707.3.2) Supplying and laying 3 core 4 sqmm flat type copper cable with ISI mark

724.6) Supplying and laying of following size PVC armoured LTUG cable (Below Ground level) a) 3.5C x 95 Sqmm PVC armoured LTUG cable

724.7) Supplying and fixing of brass cable gland suitable for a) 3.5C x 95 sqmm PVC armoured LTUG cable

724.8) Supplying and fixing of cable end termination suitable for a) 3.5C x 95 sqmm PVC armoured LTUG cable

741.8) Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in Flush with wall with earth connection (For AC Plug) Legrand (MDS) / Hager (L&T) Equivalent/ Superior variety

752.1) Construction of Inspection chamber Size: 60 x 60x 75cm

799.1.1) Drilling of 150mm dia borewell anywhere including transportation from one place to another place in alluvial soil or sedimentary starta mud circulation method a) Drilling of borewell in upto 60m

799.3.1) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

826) Supply and laying of Hard core layer 200mm

832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

960.3) Supply, installation, testing and commissioning of 100 KVA Diesel Generator set with AMF panel

960.4.5.1) Supply and fixing of 4' 18 watts LED Tube Light (Crystal glass)

961) Supplying and fixing of Aluminium TNPHC Emblem of 18" height

961.1) Supplying and fixing of following height aluminium letters a) 12" height aluminium letters

961.2) Supply and fixing of plastic foam name plate with vinyl cutting letter with approved colours a) 20"x 5"

VIJAYMURALI BUILDER

Bidder Name

P SELLAPPAGOUNDER

VIJAYMURALI BUILDER