GE 861 EWS-19/2024-25

Amount

Demolition of Plain Cement Concrete in ground floor and paving not exc 15cm thick (below or above) ground level complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 (40mm graded stone aggregates) as in floor finish, surface finished even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F in welded steel fabric weight n-exc 4 kg per sqm fixed complete to wood or steel member complete all as specified and directed. (Note: Actual weight of welded steel fabric per Sqm shall be ascetained by a BOO convened by Accepting Officer)

M&L for Reinforced cement concrete 50mm thick with liquid WPC @200ml for bag of cement shotcreting by pumpcrete machine with high pressure spraying on vertical or horizontal surfaces (using 10mm graded crushed stone aggregate including of min flexural strength 40kg/square centimetre in field using minimum 450 kg/cum of cement in concrete as design mix) including smooth finished surfaces by using extra cement complete all as specified and directed.( NOTE- Cost of liquid WPC shall be deemed to be included in the quoted rate of the item).

M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses etc for fair finished surfaces of concrete complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 mixed with water proofing compound finished even smooth without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid for separately under respective item of this schedule).

M&L for rendering 5mm thick on other than fair faces of brick work or concrete surfaces in CM1:3 mixed with water proofing compound finished even smooth without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid for separately under respective item of this schedule).

Supply only Integral water proofing compound complete all as specified and directed.

Demolition cement concrete of any description and any position complete all as specified and directed.

M&L PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping of water troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coat of white wash complete all as specified and directed.

Demolition of cement concrete of Roofs, floors , beams, staircases, landings (other than ground floors) chajjas and similar suspended work complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in roof surface (PCC padding and the like) surface finished even and fair complete all as specified and directed.

M&L for 15mm thick screed bed over roof slab in CM 1:4 mixed with water proofing compound complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid for separately under respective item of this schedule).

M&L for providing and laying EPDM membrane water proofing treatment with membrane thickness not less than 1.50 mm on the RCC roof surfaces after properly preparing the surface by cleaning and removing any sharp material like reinforcement steel, loose foreign materials, oil, grease etc and ensuring a smooth surface. Membrane shall be fully adhered with high strength solvent base having quick bonding between the membrane with the help of bonding adhesive as per manufacturer's standard instructions (suitable for temp and environmental condition of the site). Overlap joint shall be made using factory applied secure Tape technology. Membrane shall have minimum of 75mm side and end laps which shall be sealed with highly formulated double sided SECURE TAPE. All the end of the vertical side of the membrane shall be mechanically terminated with extruded aluminium termination bar with nail and sealed with water cut off mastic and lap sealant. All the detailing like inside corners, outside corners, pipe penetrations etc shall be with Elasto form flashing and splicing cement as per manufacturer's specification complete all as specified and directed.

M&L for Preparation of new plastered surfaces of walls & applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance as per IS 15489:2004, Alkali & fungal resistance, (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (NOTE- Colour shade to be approved by Engr- in -Charge.)

M&L for Preparation of old plastered/unplastered surfaces of walls & applying one coat of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, per IS 15489:2004, complete all as specified and directed., (NOTE- colour shed approved by Engr- in -Charge.)

Demolition of brick/stone masonry work built in Cement Mortar including all quoins etc and precast concrete articles complete all as specified and directed.

M & L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 Mtr mean radius built in Cement Mortar 1:6 complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on concrete surface as in facia and the like using integral water proofing compound, surface finished even smooth without using extra cement complete all as specified and directed. (Note: Water proofing compound shall be measured and paid for separately under respective item of this schedule).

Dismantling of Plain or corrugated steel sheeting any gauge or any thickness complete all as specified and directed.

S&F for Plain Aluminium sheeting 0.56mm thick, Alloy 31000 H4 in ridges, hips, valley gutters, drip and straight flashing and the like complete all as specified and directed.

M & L for dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from frames) area of opening exc 1.5 Sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from frames) area of opening not exc 1.5 Sqm each complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.

Taking down 15 mm dia steel water tubing and connections including cleaning for re-fixing or for removal to store complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 but n exc 0.18 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

-Ditto- all as per item no 31 above but such as in skirting, dado, vertical surfaces over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular ) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm over and including 15mm thick screed bed in cement mortar 1:6 in floors etc set and jointed in neat cement slurry and in white or coloured cement to match the surface complete all as specified and directed.

M & L for glazed coloured ceramic tiles in vertical surface size of tile 450x300x6mm thick over and including 10mm thick backing plaster in CM 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the surface complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces of walls with cement mortar 1:6, surface finished even and smooth without using extra cement in wall complete all as specified and directed.

M & L for rendering 15 mm thick on surface other than fair face of brick work or concrete in cement mortar 1:4, surface finished even and smooth without using extra cement complete all as specified and directed.

S & F of prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L chequered cement concrete tile 20cmx20cmx25mm thick with grey cement and pigment, set, jointed and pointed neat cement slurry and over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for PCC (1:4:8) type D-2, 75 mm thick using 40 mm graded aggregate as in sub base complete all as specified and directed..

S&F 605mmx605mm GI frame work for seamless ceiling snap grid frame work for false ceiling with all necessary angle & Tee arrangement with and incl fixing cleats screw etc complete all as specified and directed.

S & F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F false ceiling with 8mm thick (Non asbestos fibre cement building boards) fixed in ceiling flat or sloping inserted in GI/aluminium frame work complete all as specified and directed. (Make-Armstrong, saint Gobain)

S & F of 15mm dia mild steel water tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/ glazed with putty or fixed with beads complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 sqm each pane complete all as specified and directed.

S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; stuck inside with solvent cement for stiles thick 2, 4 or 6 raised panel design with fixing in the frame at site as per specification complete all as specified and directed.

M & L for 35mm thick second class hard wood plain framed panelled shutters (two number of panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part1), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick Second class hard wood Glazed and skeleton window shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. complete all as specified and directed.

S & F second class hard wood plain, solid, straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar, exc half brick but not exc one brick thick for inserting hold fast and making good disturbed/dismantled portion in cm 1:4 or cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) complete all as specified and directed.

S&F mild steel Flat Iron 25mmx3mm as in hold fasts inserted brick wall complete all as specified and directed.

S & F aluminium anodised tower bolt of extruded section of length 150mm and fixed complete all as specified and directed.

S & F aluminium anodised tower bolt of extruded section of length 100mm and fixed complete all as specified and directed.

S & F aluminium anodised handle of length 150mm and fixed complete all as specified and directed.

S & F aluminium anodised handle of length 100mm and fixed complete all as specified and directed.

S & F to 75mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F to 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt 250mm of length with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolt and sliding bolts complete all as specified and directed.

S & F in repairs Rotational moulded polyethylene water storage tanks 1000 litre capacity, three layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete all as specified

S & F in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs 15mm bore bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferrule complete all as specified and directed.

S & F in repairs 15mm stop valves cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan, Orissa pattern size 580 x 440mm white with integral foot rests including provision of lime concrete bedding with `P' trap and connection to drain and to flushing pipe anti syphonage pipe (excluding flushing cistern) complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts of length 375mm complete all as specified and directed.

S & F in repairs in PVC Low level flushing cistern 10 Ltr capacity syphonic action type, white with inlet ball valve float and handle including bracket complete all as specified and directed.

S & F in repairs vitreous china wash basin of size 450x300 mm oval type excluding taps, waste chain, porcelain stopper and plug but including 32mm dia PTMT waste coupling, 32mm dia PVC waste pipe and fixing brackets complete all as specified and directed.

S & F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed for iron pipe and fixed complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparation of old painted wooden surfaces over 10 cm width or girth and applying One coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of painted new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for one coat of cement based paint on walls including preparation, washing, rubbing down and stopping of old painted surfaces all as specified

M & L for one coat of Oil bound distemper on old surfaces of wall including preparation of surfaces complete all as specified and directed.

S & F in repairs Curtain Rod/ drapery rod 25mm dia Decorative type with a pair of brackets for each cut length of curtain rod, powder coated of approved pattern and colour, complete all as specified

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse/Schedule of credit such as regulators, light fitting, MCBs complete all as specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per srl item No-81 here in above but for One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and directed.

All as per srl item No-81 here in above but for One 3 pin socket outlet, 5 Amps on independent, with cables 1.5 sq. mm size complete all as specified and directed.

Description all as per item No 81 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed.

S&F switch piano flush type, 06 Amps single pole, one way complete all as specified & directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 5/15 Amp flush type universal complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fixing LED lamp 9 W complete all as specified and directed.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on and including two nos PVC square boxes of required size complete all as specified and directed.

S&F in repairs sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F in repairs MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

S&F in repairs MCB, SPN (single pole and neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed.

Material & labour in replacement for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 4mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S&F in repair 1100 volts grade service cable with PVC insulated aluminium conductor 16 Sq mm nominal cross section 2 core complete all as specified and directed.

Supply and fix air termination single pointed Aluminium rod not less than 12mm dia and 300mm long including fixing of GI base on epoxy insulators of suitable size to isolate from the roof and fixing of insulators on roof over the purlin using self tapping screws of suitable length or other means to make the roof leakage proof for fixing of air terminal rod and connecting with down/roof conductors complete all as specified and directed.

M&L Aluminium strip of size 25x3.15 mm including epoxy/porcelain insulators of suitable size, distance between insulators not more than 1 mtr including fixing screws washers etc complete for PCC block of size 200x200x200mm in cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate including cost of PCC block for RCC roof, using screws, washers, gutti/rawal plugs etc complete all as specified and directed.

Material and labour for test point terminal block made of gun metal or phosphorus bronze size 75 x 75 x 25 mm drilled and screw end connected to existing Aluminium/GI strips complete including 3 nos. 8 mm dia 25 mm long hex. head screw complete and including fixing of test point with sheet metal enclosure on insulators to isolate from the walls, fixing of insulators on wall using suitable size of screws, washers, gutti/rawal plugs etc, including making good to disturbed surfaces complete complete all as specified and directed.

M & L for Earthing complete with GALVANISED STEEL EARTH plate electrode of size 600 mm x 600 mm x 3.15 mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.65 Mtr below normal ground level connected to 25 x 4mm GALVANISED strip and earthing lead protected with 50 mm dia GI pipe light grade filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a distance not exceeding 50 mtr and connected to GI strip by means of GI nuts, bolts and washers strip connected to earth plate including chamber PCC 1 : 3 : 6 type C1. using 20 mm graded stone aggregate in concrete pit pre-cast RCC 40 mm thick reinforced with 6 mm dia round at the rate of 75 mm C/C both way with 12 mm dia mild steel plain bar lifting handle 2 Nos funnel with wire mesh 20 mm dia GI pipe light grade watering pipe and frame work complete all as shown in electrical plate No. 3 of SSR Part - I 2009 including testing complete all as specified and directed. (25x4mm GI earth strip upto 7.5 m length in included in unit rate quoted by contractor and beyond this length the same shall be measured & paid separately.

M/S TANTRAY AND CO (BID ID -3025662)

M/S Manzoor Constructions (BID ID -3017915)