REPAIRS TO FENCING, PATH AND HARDSTANDING AT KARAM SINGH ENCLAVE, CENTRAL AMENITIES, AND ADJACENT AREA IN AOR OF AGE BR-I AND PRUNING OF TREES, BRANCHES, MAINT OF AREAS AND CONNECTED WORKS AT VARIOUS EM INSTALLATIONS UNDER AT PMS

Amount

Dismantling post (Wood/Steel or RCC) any section including taking out embedded portion in concrete, brick work , masonry etc, and making good disturbed portion complete all as specified and directed.

M&L for Plain Cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete or for sides of posts complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

S&F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as apecified and directed by Engineer- in -Charge

Supply only chain link MS hot dipped galvanized coating on round steel wires fencing of mesh size 75 x 75 mm with minimum dia. of wire 3.00 mm to 4mm ,fixed to MS fencing posts and securing with nuts, bolts and fillets etc and tying with MS binding wire etc by weight per sqm not exceeding 4 kg, complete all as specified and directed by Engr-in-Charge.

Fixing only chain link MS galvanised fencing of mesh size 75 x 75 mm with minimum dia. of wire 3mm to 4mm including line wires ,any mesh ,size and any type of standard, rail, strainingbolts etc including provision of binding wire complete all as specified. to MS fencing posts and securing with nuts, bolts and fillets etc and tying with MS binding wire etc by weight per sqm not exceeding 4 kg ,complete all as specified and directed by Engr-in-Charge.

S&F stainless steel hot dipped screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed.

Demolition for brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for old size brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM 1:4 for drain all as specified as directed.

All as per item No 12.00 here-in-before but except bricks.

M&L for hardcore broken stone aggregate of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface.

M&L for PCC in foundation filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L for cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed.

M&L for cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed.

M&L for forming fair finish drain channel inner girth not exc 30 cm in cement concrete using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster, any descriptio on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etcomplete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 ) and finish smooth & even with using extra cement complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of alkali resistanse primer complete all as specified and directed.

M&L for preparation of surfaces of steel and iron of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M & L for cement concrete type B1, for PCC (1:2:4) using 20 mm graded aggregate as in floors and pavings etc finishing cement concrete surface complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for re-fixing of machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortarCM 1:6 for edging complete all as specified as directed.

Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed.

M&L for providing RCC precast cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in cover slab for drains and similar article with plain face set in cement mortar (1:4) complete all as specified and directed

M&L for mild steel TMT bar 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified & directed by Engineer in Charge.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or in weep holes etc complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) as in post holes complete all as spd and directed.

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to anyheight including all necessary scaffolding and safety measures complete all as specified and directed

Pruning/trimming of branches of trees interfering or overhanging electrical overhead lines in such a way to have a clearance of not be less than 2 mtrs from the outermost conductors on both side complete all as specified and directed by Engr-in-Charge (Span of conductor shall be measured from insulator to insulator without allowance for overlapping) All as specified and directed by Engr-in-Charge.

Surface dressing (at MES Installation) n.exc 15 cm deep in soft / loose soil all as specified including clearing away all grass vegetation, saplings, shrubs, brush wood, under growth, roots and trees n. exc. 30cm girth, scrapping high patches and filling in low patches with the scraped soil to give an even and neat look to the site. and removing rubbish upto a distance of 50 metre out of the periphery of the area complete all as specified and as directed.

Mechanized cleaning of vegetation and grass cutting at surrounding area of sub station, installation area, two/four pole structure and as directed by the engineer-in-charge within Army Station Panagarh by providing required Nos of bush cutter (four stroke not and less than 1.00 KW engine power and two blade cutter type including operator necessary fuel, oil, lubricant and removing of debrises, stone metal etc from work site all as specified and as directed by Engineer-in-charge including removing of material obtained from cutting & cleaning.(Area shall be cleaned once in every month)

Note for Srl Item No 35.00 to 37.00 :-The grass/vegetation/tree branches shall be removed out of the installation Areas .Contractor will provide total safety tools/equipments at working place & contractor will also ensure the all safety measures at site before the start of the work on daily basis.Contractor will ensure to take proper shut down of power supply of respective working site before execution of work.

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP (BID ID -3379324)

M/S MODERN CONSTRUCTION (BID ID -3379280)

HAZRA ENTERPRISE (BID ID -3379303)

M/S DEBNATH MONDAL (BID ID -3379286)

M/S TILKU ENTERPRISE (BID ID -3379270)

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3379257)

KAZI SAHABUL ALAM (BID ID -3379252)