Construction of Residential Flats 2 BHK type 4 Storeyed including Sanitary fittings for Govt. Employees at Pampore Srinagar. Block 4

Amount

Civil Work

Earthwork in excavation by mechanical /manual means in foundation trenches, pipes, cables, drains, cess pools, pits etc including dressing of sides and bottom and disposal of surplus excavated earth within site as directed, including all loads, leads and lifts complete.

Providing and laying of stone soling in foundation and plinth incl ramming and all carriages upto site of work

Supplying filling of stone dust including watering compacting and dressing under floors incl all carriages

Filling available excavated earth in trenches, plinth, sides of foundation incl ramming and watering

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.

All work up to plinth level: 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).including all carriages upto site of work.

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement conrete of specified grade for reinforced cement concrete structural elements excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions (as per IS: 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-20 grade reinforced cement concrete.

All works upto plinth level

All works from plinth level upto floor V level.

Add or deduct for using more or less cement in the item design mix over and above the specified cement content therein.

Reinforcement for R.C.C. work including straightening. cutting, bending, placing in position and binding all complete.Including all carriages upto site of work. (Thermo-Mechanically Treated bars)

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc for mass concrete etc

Columns, Pillars, Piers, Abutments, Posts and Struts.

Walls any thickness including pilasters, buttresses, plinth and string courses etc upto floor V level

Lintels, beams, plinth beams, griders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access plateform

Shelves ( cast in situ)

Staircases (including landing) except spiral staircases

Edges of slabs and breaks in floors and walls.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth.

Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for brick masonry bricks in superstructure above plinth level upto floor V level (by manual means).

Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand)

Extra for half Brick masonry in superstructure above plinth level upto floor V level

Extra for Brick work in corbelling in 1:4 Cement Mortar instead of 1:6 Cement Mortar including cost of form work extra labour.

Dry random rubble masonry with hard stone using quarry stones in soakage pits incl. cost of bond stones & all carraiges upto site of work comp.

Random rubble masonry with hard stone from quarry in soakage pit including levelling up with cement mortar 1:6:12 at top of dry masonry with cement mortar 1:6 (1cement : 6 fine sand) & all carraiges upto site of work comp.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). 2nd Class Kashmir Deodar wood

Providing and fixing panelled or and glazed Shutters for doors, window incl MS pressed Butt hings bright finished excl c/o panelling which will be paid for separately, all cpmplete as per direction of Engineer-in-charge. Ist class Kashmir Kail wood 35mm thick

Providing and fixing 35mm wire gauze Shutters using galvanised M.S. wire gauze of avg width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows with hings and screws. Ist class Kashmir Kail wood

Providing & Fixing of 3.5 mm thick glass panes in fixed windows/ doors incl wooden beadings complete

Providing and fixing lSI marked 35mm thick factory made solid cors flush door shutters core of block board construction conforming to IS code with frame of 1st class hard wood and well matched commercial ply and lamination on both faces of shutters including cost of SS pressed butt hings with screws of required size.

Providing and fixing 40x5mm flat iron hold fasts 40cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete blocks 30 x10 x 15 cm in 1:3:6 mix with 20mm nominal size stone aggregate.

Providing and fixing of dash fasteners of required dia and length for fixing of wooden frames to RCC works.

Providing and fixing aluminium Tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing aluminium casement stays lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing sliding door bolts lSI with lock ( L-drop) marked anodised transparent or dyed to required colour or shade with nuts and screws etc. complete Link, Godraj or equivalent. 300 x16 mm

Providing and fixing aluminium handle lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. Twin rubber stopper

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body door weight upto 36-80 kg and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete

Structural steel work welded in built up sections, trusses and framed work, soffits, eaves boarding and like including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Providing & fixing high rib profiled sheeting 1000 mm minimum cover width with minimum 28-32 mm crests, manufactured out of 0.50 mm TCT (Total Coated Thickness) Hi-Tensile SMP Galvalume steel. The sheets shall have wide pans with 2 to 3 nos. stiffening ribs, effective water shedding and special male/female ends with return legs on side laps for purlins support and anti-capillary flute in side, lap. The sheets shall have a hot-dip metallic coating of Zinc and Aluminium (150 gms/sqm zinc/alum.coating mass total on both sides, AZ-150 as per AS1397), 550 Mpa yield stress, providing silicon modified polyester coating of approved colour of total thickness of 35 microns comprising of 20 microns exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces including, ridigs/ Hips / Valley/ laps and using 12 mm polymer coated hot dip galvanised hex self drilling fasteners on each crest of sheets for connection with purlins.

Cement conc. Flooring in 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate) finishing with a floating coat of neat cement. including cement slurry but excl the cost of nosing of steps etc complete.40mm thick with 20 mm nominal size stone aggregate (crushed)

Providing & fixing glass strips in joints of flooring 32mm x 4mm size

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm (Double charged)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, in skirtings, risers of steps over 12mm thick cement mortar 1:3 (1 cement :3 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 60x60cm .

Providing & laying 16-18 mm minimum thick pre-polished (best quality) granite stone slabs of all colours (non water absoring) in floors, treads, risers landings, skirtings etc over on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and joined with white cement slurry mixed with pigment or with standard tile made compound to match the shade of the slab. Including rounding, rubbing, clamping, curing, moulding, granite polish & making grooves as required complete (Note: The stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured)

Extra for providing of double moulding in treads of stairs including cost of spacer, granite stone 50mm wide, moulding and polishing complete.

Providing and fixing gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, or fixing with adhesive suitable for wood and granite curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of approved colour and shade (area of slab over 0.50 sqm) 16 -18 mm thick

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/ Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed Digital wall tiles conforming to IS : 13753 ( miniumum thickness 5 mm ) of approved make NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles antiskid 300x300 mm (thickness to be specified by the manufacturer) of 1 st quality conforming to IS : 13755 NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colours such as White, Ivory, Grey, Fypre Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement: 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. including all carriages upto site of work.

15 mm cement plaster on rough side of brick wall of mix:

1 : 6 ( 1 cement : 6 fine sand )

12 mm cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand )

Extra over item No 29.2 for cement plaster on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of.

Extra for cement plaster using 1:4 mix instead of 1:6 on bay window corbelling/ projections, edges of slabs upto 125mm thickness

6 mm cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand)

12 mm cement plaster of mix 1: 4 (1 cement: 4 fine sand).

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and fixing 20mm thick cement concrete exterior wall tiles (duracrete or equilvent ) of approved make/pattern over 20mm thick cement mortar in ( 1 ; 4) mix incl filling of joints with cement slurry mixed with matching color pigment and carriage complete.

Providing and applying plaster of paris of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying of wall putty in two coats water proof in wet areas.

Providing 75mm x 75mm / 2 POP cornice on the ceiling

Applying one coat of water thinable cement primer of approved brand

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work.

Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On plastered surface.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work over an coat of suitable shade with ordinary paint

Painting with ready mixed synthetic enamel paint of approved brand and manufacture all shades to give even shade. New steel works (two or more coats)

Providing and fixing of manglore tile in ( 1: 3) cement mortar including making of slopes in cement conc 1:2:4 on bay window roofing as per design including all carriages and scouffolding complete.

Wardrobes & Kitchen Cabinets

Providing and fixing of 19mm thick (water proof ) marine ply of approved brand in kitchen counters, cabinets, shelves, drawers etc all shutters and edges of visiable sides of 19mm ply shall be fixed with 15mm thick hard wood margin, all exposed faces inside as well out side have to finished with lamination ( thickness 1mm minimum) of approved shade and make including all hardware fittings, channels, cover fillets, mouldings as per drg. Century, Jeera, Premier, Duha or equivalent

Overhead cabinets 300mm deep

Under counter cabinets 575 mm deep

P/F of stainless steel Dish rack set of 2 shelves with tray to be fixed over sink incl all fitting 700mm x 300mm size. Ebco, Morff, G Storrb or equivalent brand

P/F of stainless steel Cup & Saucer basket incl all fitting 15" x20" 4" size. Ebco, Morff, G Storrb or equivalent brand

Providing and fixing of 19mm thick ply of approved brand in Wardrobes shelves, drawers etc all shutters and edges of visiable sides of 19mm ply shall be fixed with 15mm thick hard wood margin and 6mm thick ply on back, all exposed faces inside as well as out side have to finished with lamination of approved shade and make including all hardware fittings, channels, cover fillets, mouldings. SS hanger rod and looking Mirror and drawer as per drg. 600 mm deep

Providing and fixing Aluminium Composite sheet cladding (exterior grade) in vertical / horizontal surface using 4mm thick sheet (Aluco Bond) (Proprietory make/ trade mark. The sheet shall be bent to shaped profiles as required including Perimeter Extrusion base frame extruded stifferners 2.5 to 3mm, SS expansion fasteners and silicone sealant (Dow Corning 789),all back up arrangements required for installation as per approved Architectural Elevation drawings, complete in all respects.(Sheet of Alucobond / Reynobond / Alpolic / Gurind make).

Providing and fixing of 25mm dia SS curtain rod with brackets and end caps of approved make

Providing ornamental moulding at plinth level with cement mortar 1:3 mix, 50 mm x 100 mm size in pattern and profile

Supply and installation of satin finish stainless steel AISI 304 stainless steel handrail and balustrade system having 50mm dia tube handrail (1.5mm gauge) weight 2.82 kg erected with chemical grout to be fixed on the top of slab/skirting (Spigot Fixed) 40mm dia vertical posts an alternate step, 16mm dia horizontal rails 3NO . Height shall be upto 1000 mm above the finished skirting level complete as per architectural drawings. -

Pro fixing stainless steel 100 mm dia master pillar incl base/ top ball of standard size

Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x2mm and braced with flat iron diagonals 20 x 5mm size with top and bottom rail of T-iron 40 x 40 x6mm with 40mm dia steel pulleys complete with bolts nuts, locking arrangments stoppers, handles including applying a primer coat of approved steel primer.

Providing and fixing of wooden facade in horizontal, vertical and cross bacings heritage work (Daje Deveri design) fixed with wooden/ PVC pluges including applying of black Japan on back side and satin finish paint on exposed face of wood upto floor V level incl cost of scouffolgings in Kashmir Deodar wood 32mmx 100mm size . ( finished measurement to be paid)

Plumbing and Sanitary

Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.oom spacing. This includes cost of cutting chases and making good the same incl testing of joints complete as per direction of Engineer-in Incharge. (Concealed work incl cutting chases and making good the walls etc)

PN -20 pipes, 20 mm OD

PN -20 pipes, 25 mm OD

Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C fixing the pipe with clamps at 1.oom spacing. This includes cost of cutting chases and making good the same incl testing of joints complete as per direction of Engineer-in Incharge. (Internal work exposed on wall )

PN -20 pipes, 32 mm OD

PN -20 pipes, 40 mm OD

PN -20 pipes, 75 mm OD

Providing & fixing 3 layer PP-R (Poly Propylene Random copolymer) pipes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings I/C trenching, refilling and testing of joints complete as per direction of Engineer-in Incharge. (External works) PN -16 pipes, 40 mm OD

Providing and fixing P.V.C Soil, waste, Rain water Pipes,vent pipes medium class ISI mark including all fittings with or without access of any degree i.e bends, junctions, cowls, offsets, access pieces, holder bats and structure steel fabricated supports, clamps for suspended pipes in ceiling, stays, through ducts, etc and jointing with solvent/seal joints including cutting holes in walls and floors. 100 mm dia

Providing and fixing P.V.C Soil, waste, Rain water pipes medium class ISI mark including all fittings with or without access of any degree i.e bends, junctions, access pieces, and jointing with solvent/seal joints including cutting holes in walls and floors and excavation, refilling and disposal of surplus earth wherever required and making good the same complete, as directed by the Engineer-in-charge.

100 mm dia pipe

150 mm dia pipe

Providing & fixing 50mm dia P.V.C. pipe medium class ISI mark complete with fittings, clamps including cutting and making good the walls and ceiling for waste pipes, bath wastes, overflow, kitchen equipment waste connections and condensate drainage, as directed by the engineer-in-charge.

Providing and fixing PP-R ball valve of full flow with of superior quality.

75 mm dia

40mm dia

32mm dia

25mm dia

20mm dia

Providing & laying allround cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 stone aggregate 20mm and down gauge) 75mm in bed and pipe.

For 100mm and 150mm dia pipes under floor including centering & shuttering wherever required.

Providing and fixing P.V.C floor trap 100mm dia including cost of cutting and making good the walls and floors wherever required.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm P.V.C or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing & Fixing first quality white vitreous china flat back wash basin size 550 x 400 mm with C.I/M.S brackets painted with two or three coats of enamel paint of approved shade over a coat of primer, C.P. brass waste and coupling, chain and rubber plug, P.V.C Flexible waste pipe complete including cutting and making good the walls wherever required.

Providing and fixing vitrous china pedsetal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing & Fixing 15 mm dia C.P brass angle valve with C.P brass wall flange of approved make complete including cutting and making good the walls wherever required.

Providing & Fixing 600x20 mm C.P brass towel rail of approved make with C.P brackets fixed to wooden cleats with C.P brass screws etc. including cutting and making good the walls wherever required .

Providing and fixing C.P. brass Soap Dish/ tray of approved make including screws complete

Providing and fixing C.P. brass tambler holder approved make including screws complete

Providing & fixing SS coat hooks strip (plate type 6 hook 300-400mm length) fixed with PVC rawal plug and C.P brass screws including cutting and making good the walls wherever required.

Providing & Fixing C.P. brass Single hole Mixer of approved make for wash basin of approved make including cutting and making good the walls wherever required.

Providing & Fixing C.P. brass non- telephonic wall Mixer of approved make including cutting and making good the walls wherever required.

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board, 610x510mm bowl depth 200mm

Providing & Fixing C.P. brass towel ring fixed to PVC rawal plug with C.P. brass screws. Heavy type

Providing & Fixing of health faucet with shower and flexible connection 1.20mtr long of approved brand complete.

Providing & fixing C.P. brass sink mixer with of approved make swinging casted spout wall mounted complete including cutting and making good the walls wherever required.

Providing & fixing of 600x120x5 mm glass shelf with edges round of supported on anodiseed aluminum angle frame with C.P. brass and brackets and guard rail complete with fixed with 40 mm long screws , rawl plugs, etc complete.

Providing & fixing of 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete fixed to PVC rawal plug with C.P. brass screws and washers complete.

Providing & fixing of 15mm dia PVC connection 600mm long including end union and washers complete.

Providing , installation, commissioming and testing Hot water Geyzer of approved make including fixing with bolts/ fastners

50 litre capacity

20 litre capacity

Providing and fixing C.P / Stainless steel anti cockroach trap (grating) on floor traps and floor drains with cement mortar, complete in all respects.100mm dia

Providing & laying of M.S. pipe heavy duty 100 mm dia

Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand), 200mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), neatly finished complete as per standard design including excavation, refilling and disposal of surplus earth.

Inside size 600x600mm and deep upto 500 mm including SFRC cover

Inside size 450x450mm and deep upto 400 mm including SFRC cover

Providing and fixing SRFC Manhole covers 600mm dia heavy duty

Providing Over head PVC Storage tank triple layer ISI mark of approved make including allied tank fittings such as tank nipples etc making of necessary connections complete.

Supplying, Installation, testing and commissioning of Submergable water pump 3HP including Panel and all fittings and fixtures complete.

M/S MOHD AMIN MALLA

HAJI GHULAM RASOOL SHEIKH AND SONS

JAN MOHD SOFI