Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.7 LAccepted-AOC NEAR S B O P WARD NO 1 SURDULGARH MANSA | SURDULGARH | MANSA | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹22.0 L+₹2.1 L (10.3%)Rejected-Finance ASTBAL MOHALLA BANASAR BAGH ROAD PATIALA GATE SANGRUR 148001 | SANGRUR | SANGRUR | PUNJAB | 148001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹27.0 L+₹7.0 L (35.2%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹28.9 L+₹8.9 L (44.8%)Rejected-Finance VILLAGE SEKHA PO MAGAR MUDIAN TEH DISTT GURDASPUR PB | GURDASPUR | GURDASPUR | PUNJAB | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹29.1 L+₹9.2 L (45.9%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
6 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Himanshu, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2023_MES_622391_1
GE(S)/PAT/T-50/S/2023-24
Open Tender
Civil Works
Item Rate
180 days
Mil Stn Sangrur
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE(South) Patiala
₹60,000
Yes
21 Dec 2023
9 Oct 2023
8 Nov 2023
9 Oct 2023
6 Nov 2023
23 Oct 2023
9 Oct 2023 - 16 Oct 2023
Amount
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed by Engr-in-Charge.
Refixing of shutter in the same opening not exc 1 sqm each complete all as specified and directed by Engr-in-Charge.
Refixing of shutter in the same opening exc 1 sqm but not exc 2 sqm each complete all as specified and directed by Engr-in-Charge.
M&L for Factory made pressed steel frames for doors with one with one or more rebates size of frame (105 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-Charge.
M&L for Factory made pressed steel frames for doors with one with one or more rebates size of frame (125 x 60 mm )including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-Charge.
M & L for PCC 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) as in filling to pressed steel frame of door complete all as specified and directed by Engr-in-Charge.
35mm thick plain framed (Factory made) Panelled shutters (two panel) of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seanoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.. (a) Stainless steel (304 Grade) Finished butt Hinges 150mm -4 nos. per leaf. (b) Stainless steel (304 Grade) Finished square Tower Bolt 200mm -2 nosper leaf. (c) Stainless steel (304 Grade) Finished Handles 200mm-2 nos per leaf. (d) Stainless steel (304 Grade) Finished Sliding Bolt 300mm - 1 nos.per leaf.
M&L for 35mm thick glazed and skeleton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge. (a) Stainless steel (304 Grade) Finished butt Hinges 150mm -4 nos. per leaf. (b) Stainless steel (304 Grade) Finished Tower Bolt 200mm long -2 nosper leaf. (c) Stainless steel (304 Grade) Finished Handles 200mm-2 nos per leaf.
M&L for Providing and fixing factory made extruded aluminium casement windows with 50 micron powder coating with provision for desert cooler, doubled panelled and double shutters consisting of frame and mullion of 101.60 X 44.45 X 1.29 mm and shutters made of 63.5 X 31.75 X 1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed complete all as specified and directed by Engr-in-Charge including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 Nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 Nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 Nos per leaf.
S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete all as specified and directed by Engr-in-Charge.
S&F factory made aluminium 50 micron powder coated grill opening size 101.6X63.5mm (4"x2½") and approx weight @ 1.345kg/sqm complete fixed in position in window complete all as specified and directed by Engr-in-Charge.
M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
M&L for Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed by Engr-in-Charge.
M&L for 100 mm size PVC butt hinges complete all as specified and directed by Engr-in-Charge.
M&L for 150MM PVC handles complete all as specified and directed by Engr-in-Charge.
M&L for 200mm long PVC tower bolt complete all as specified and directed by Engr-in-Charge.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane complete all as specified and directed by Engr-in-Charge.
M&L for glazing incl hacking out old broken glass of any thicknesssize or description from wooden frames or metal frames fixed with wooden beads/ putty complete all as specified and directed by Engr-in-Charge.
S&F in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.
S&F 300mm ordinary mild steel rat tail rod patttern springs includding roller and roller plate complete all as specified and directed by Engr-in-Charge.
S&F in repair Stainless steel gauge wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as specified and directed by Engr-in-Charge.
S&F stainless steel tubing 202 grade of 25mm dia mild steel chromium plated 1.0mm thickness as in curtain rod complete including S&F 02 nos stainless steel brackets fency type stop etc in repairs complete all as specified and directed by Engr-in-Charge. Note :- For the purpose of measurement and payment running length of curtain rod only shall be considered.
S&F Stainless steel gauge wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as specified and directed by Engr-in-Charge.
M&L for Factory made steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing incl taking down complete all as specified and directed by Engr-in-Charge.
Preparing new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr-in-Charge.
Resecuring or easing and adjusting wooden / PVC shutters of any description exc 1 sqm and n exc 2 sq m each including taking down and refixing where ever required and fixing new screws complete all as specified and directed by Engr-in-Charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed by Engr-in-Charge.
Preparing new steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-Charge.
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings ( exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge.
Repair to steel window shutter by replacing unserviceable hinges , handles , peg stay etc by way of welding etc as required , oiling to hinges, setting right and easing of shutters to function properly and painting at welded portion to match the existing surfaces complete all as specified and directed by Engr-in-Charge.
Securing glass of any description, in existing steel frames glazed with putty including removing loose or decayed putty, painting /oiling one coat on rebates and grooves, reputtying and painting oiling puttied surfaces to match existing work complete all as specified and directed by Engr-in-Charge.
M&L for Block boards, (19 to 20mm )grade 2 quality, interior grade, commercial type , fixed with screw to timber frame-work fixed in repair complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.
M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.
M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Dismantling loose/disintegrated portion of RCC Chajjas, bands, shelves, beams, ceiling and similar works incl provison of supports if reqd and dubbing with PCC (1 : 1.5 : 3) using 6 to 12 thick graded stone aggregate in any portion of 15mm to 50mm thick and finshing to desired shapes complete all as specified and directed by Engr-in-Charge.
M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply only integral water proofing compound complete all as specified & as directed by Engineer-in-Charge.
M&L for Preparation of new surfaces and applying two coats of oil bound distemper (of approved quality & tint) surface of wall using painting rollers, over a coat of primer complete all as specified and directed by Engr-in-Charge. Note: Manufacturer's instruction is to be followed for prepration of surface.
M&L for Preparation of old decorated surfaces by washing, scrubbing down and applying two coats of oil bound distemper (of approved quality & tint) surface of wall using painting rollers, complete all as specified and directed by Engr-in-Charge. Note: Manufacturer's instruction is to be followed for prepration of surface.
M & L for preparing existing treated surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller complete all as specified & as directed by Engineer-in-Charge.
M & L for preparation new plastered to walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coat of cement base paint @ 5 sq.m/kg/1 coat by using following brands of cement based paint by roller over a coat of priming coat complete all as specified & as directed by Engineer-in-Charge.
M&L for preparing new plastered surfaces of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
M & L for preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.
Dismantling boarding of any description and fixed in any position fixed with nails or screws complete all as specified and directed by Engr-in-Charge.
S&F 18 mm thick 600 kg/cum LEAD FREE PVC Celuka ply of both side plain white color fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F 18 mm thick with min density 600kg/cum LEAD FREE PVC Celuka ply of single side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.
S&F 6 mm thick LEAD FREE PVC ply fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed by Engr-in-Charge.
S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified and directed by Engr-in-Charge.
S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.
S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.
S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets/Cutlery etc. for kitchens of required suze complete fixed in position complete all as specified and directed by Engr-in-Charge.
S&F piano/continuous hinge of size 30 mm stainless steel complete all as specified and directed by Engr-in-Charge.
NARINDER KUMAR SONS
LM CONSTRUCTIONS
GORAYA AND CO
S K BANSAL AND CO.
m/s k.k. construction co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .