ADDITION/ALTERATION TO OFFICE SPACE OF AIR WING AT DSSC WELLINGTON

Amount

B/R PORTION Taking mild steel door frame with shutter (without taking off shutters from the frames) n. exc. 1.5 Sqm each and forming jambs, etc. to openings in cement mortar 1:4 including cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing work complete all as specified and as directed.

Taking mild steel door frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4.00 Sqm each and forming jambs, etc. to openings in cement mortar 1:4 including cutting toothing and properly bonding into old work also facing,jointing and pointing to match existing work complete all as specified and as directed.

Taking down UPVC frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4.00 Sqm and refixing the same at another location with screws complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and suspension grid complete all as specified and as directed.

M & L for Granite stone slab flooring 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required, laid over and including15mm thick rendering in CM (1:6) to be fixed flooring, door, windows cladding/ openings and kitchen platform complete all as specified and as directed.

M & L for providing UPVC door with shutters all as per manufacturer's direction and following specifications all as directed :- (i) The construction profile for UPVC door shall be overall frame sectional size 60 x 58 mm with wall thickness 2.70 +/- 0.2 mm extruded sections. (ii) The corners shall be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2 mm +/- 0.2 mm. (iii) The door shall be fixed to walls using 8 mm dia 80 mm long MS screws minimum 3 Nos on each side. (iv)The glazing shall be fixed to door frame with UPVC standard beadings of sectional size 24.05 x 16 mm & 2 mm thick. The bottom portion of door shutter shall be provided with UPVC board 5 mm thick & 1 mtr in height and the balance shall be glazed excluding the shutter frame area. (v) The shutter shall be fixed to frame using 3 nos of 3D hinges. The Door shutter shall be provided with 5mm thick sheet glass & 5 mm UPVC board with EPDM rubber gasket, one motice lock with powder coated handles and two numbers powder coated MS tower bolts. (vi) All the fittings shall be provided with using self tapping screws. Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engr-in- Charge. Make: Madhu Industries / AMD Overseas Ltd/Gadli Industries/ Simta Astrix.

M & L for UPVC windows with glazing, white colour provided all as per manufacturer's direction and following specifications all as directed:- (i) The profile for construction of UPVC window frame shall be made of UPVC material confirming to IS 10151. (ii) The frame shall be made of extruded UPVC section having overall dimension of 65 × 50 mm having wall thickness 2 mm ± 0.2 mm (iii) Corners of wall frame shall be joined by MS galvanized brackets, joints mitred and plastic welded . (iv) The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (v) The profiles should be single chamber system which shall provide high insulation properties. (vi) The window system should be glazed with 6 mm thick plane glass fixed in window frame as per manufacturer's instruction. Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engg-in-Charge. Make: Madhu Industries / AMD Overseas Ltd/Gadli Industries/ Simta Astrix.

M & L for UPVC fixed ventilators with glazing all as per manufacturer's direction and following specifications :- (i) The profile for UPVC ventilator frame shall be made of PVC matereial confirming to IS 10151. (ii) The Ventilator frame shall be made of extruded UPVC section having overall dimension of 60 x 60 mm having wall thickness 2.5 mm ± 0.2 mm . (iii) Corners of wall frame shall be shall be joined by MS galvanized brackets, joints shall be mitred and plastic welded . (iv) The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. (v) Glazing shall be provide with 5mm thick frosted glass fixed with approprite size beading as per manufacures specifications. Make : Madhu Industries/ AMD Overseas Ltd /Gadli Industries/ Simta Astrix

M & L for modular false ceiling systems in Armstrong Scala having micro look teglar edges of 12mm thickness of size 600mm x 600mm GRG ceiling tiles shall have a humidity resistence of RH 99 with NRC level of 0.70 and light reflactance up to 85% and fixed with suspension system (Grid) The size of the same is 15mm x 32mm, The galvanised iron sheet of thick 0.30mm used in the manufacturing of gird is zinc coated for preventing corrosiion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as manufacturers instruction and as directed. Make: Armstrong/Diamond/Saint Gobain

Demolition of brick work/stone masonary work built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing unserviceable debris off the premises all as specified and as directed.

M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:6) complete all as specified and directed.6 .

M & L for providing precast cement concrete (1:3:6) solid building block or slabs, type C-1 (using 20mm graded stone aggregate)100mm thick (with plain or interlocking joints as directed) setting in CM (1:4) complete in walls all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:4) mixed with liquid WPC as per manufacturer's instruction on fair faces of brick work/ concrete surfaces, finished even and smooth without using extra cement all as specified and as directed. Note : Liquid WPC shall be measured and paid separately.

Demolition of unreinforced plain cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing unserviceable debris off the premises all as specified and as directed.

M & L for providing 25mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

M & L for vitrified double charged /ultracharged joints less tiles 9-10 mm thick (square/rectangular) area of each tile exc 0.36 Sqm but n.exc 1.00 Sqm in floor etc., set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Description all as per item No. 16 above but on vertical surfaces, laid over and including 10 mm thick rendering/ bac king coat in CM (1 :4) complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

M & L for digital non skid coloured ceramic tiles 7 to 8mm thick (square /rectangular ) area of each tile exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for digital glazed ceramic coloured tiles of size 600mm x 300mm x 7 mm thick in vertical surface such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including rendering layer 10mm thick in CM (1:4) complete all as specified and as directed.

M & L for RCC (Nominal mix) (1:1.5:3) type B-1 (using 20 mm graded stone aggregates) as in slab supported in walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc., complete all as specified and as directed.

M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

S & F sinks made of stainless steel, 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F CP swivel sink cock tap 15 mm bore complete all as specified and as directed. Make : Jaquar/ Parryware/ Prayag/ Hindware/ Cera

S & F in repairs 20 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

M & L for preparing new surfaces of wall and applying two coats of white wash on walls complete all as specified and as directed.

M & L for preparing new surfaces of wall and applying two coats of emulsion paint of Make : Asian Royale Shine or equivalent in Berger/ Dulux/ Shalimar or equivalent as approved by GE over and including one coat of primer and two coats of wall care putty complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coats of emulsion paint of Make : Asian Royale Shine or equivalent in Berger/ Dulux/ Shalimar or equivalent as approved by GE over and including one coat of primer and one coat of wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment and applying two coats of external weather coat with brush/roller finished even and smooth on old plastered and unplastered surfaces of walls complete all as specified and as directed.

M & L for complete removal of existing treatment from old ceiling surfaces and applying two coats of oil bound distemper over and including one coats of primer and one coat of wall care of putty complete all as specified and as directed.

Dismantling wooden boarding of any size & thickness fixed on wall on wooden scantling with screws and removing from site complete all as specified and as directed.

M & L for second class hardwood fillets (plain, square, rectangular or triangular in section) clean sawn secured with nails or brads, having sectional area exc 6 Sqcm & n. exc 13 Sqcm all as specified and as directed.

M & L for 8mm thick Pre-Engineered laminated wood for wall panelling planks of any colour and desigen (as approved by GE) fixed over and including to 8/9mm thick plywood fixed on wall or floor all as per manufacturers instructins and as directed. Make : Florz, Sapphire, Terazzo or equivalent as approved by GE.

M & L for second class hard wood timber scantling clean sawn framed and fixed on wall for hold wall panelling etc complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote Oil complete all as specified and as directed.

M & L for wooden Cornices / beading / nosing / moulding as used in pre-engineered wall panelling etc of cross sectional area n.exc 25 Sqcm complete all as specified and as directed.

M & L for providing and fixing Powder coated aluminium (minium thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with for doors, windows, ventilators and partitions (fixed partitions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash faterners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and joined mechanically wherever required including cleat angle, Aluminium snap neading for glazing/ paneling, C.P. brass/stainless steel screws, complete as per architectural drawings and the directions of Engineer-in-Charge.

M & L for 4.8mm thick frosted sheet glass, ordinary quality to be fixed in aluminium section in square or rectangular exc 0.5 Sqm in each pane complete all as specified and as directed.

M & L for prelaminated particle board 9mm thick exterior grade prelaminated both side with decorative choice laminations fixed with screws to timber frame work as in wall panelling or partitions complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S & F for 75mm bore PVC (SWR) pipes, type 'B' single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified and as directed.

S & F for 110mm bore PVC (SWR) pipes, type 'B', single socketted, in any length with rubber ring joints, fixed to walls with suitable MS clamps complete all as specified and as directed.

S & F PVC (SWR) bends 110mm bore all as specified and as directed.

S & F PVC (SWR) bends 75mm bore all as specified and as directed.

Supply only liquid water proofing compound all as specified and as directed.

E/M PORTION Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed. Note:Old existing 2' x 2' light fittings and recess type ceiling and picture lights of any size/type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Disconnecting/ dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and as directed. Note for Item Nos 46 to 48 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) concealed in walls/ceilings/roof etc., with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps. Make of cable : Havells/Polycab/Finolex. Make of conduit: Precision/Bajaj plast/Finolex

Description all as per Item No 49 above but One switch socket outlet point 5/6 Amps on independent board complete all as specified and as directed. Make of cable : Havells/Polycab/Finolex. Make of conduit: Precision/Bajaj plast/Finolex

Description all as per Item No 49 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed. Make of cable : Havells/Polycab/Finolex. Make of conduit :Precision/Bajaj plast/Finolex Note for Item Nos 49 to 51: (i) Modular metal flush boxes shall be measured & paid separately. (ii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for sub-main wiring 2x1.50 Sqmm alongwith earth wire of size 1 x 1.50 Sqmm FRLS cable of ISI marked, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) concealed in walls/ceilings/roof etc., with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit: Precision/Bajaj plast /Finolex. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately. (iii) The unit rate quoted shall included for cutting chases & making good the disturbed surface.

M & L for sub-main wiring 2 x 4 Sqmm alongwith earth wire of size 1 x 4.00 Sqmm FRLS cable of ISI marked, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) concealed in walls/ceilings/roof etc.,with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit : Precision/Bajaj plast /Finolex. Note : (i) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately. (iii) The unit rate quoted shall included for cutting chases & making good the disturbed surface.

M & L for 3-Phase sub-main wiring 4 x 6Sqmm alongwith earth wire of size 1 x 6.00 Sqmm FRLS cable of ISI marked, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) concealed in walls/ceilings/roof etc.,with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex Make of conduit : Precision/Bajaj plast /Finolex. Note : (i) Four runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (ii) Modular metal flush boxes (if req) shall be measured & paid separately. (iii) The unit rate quoted shall included for cutting chases & making good the disturbed surface.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW061, or techno-commercially equivalent in Legrand/Anchor Roma

S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSBXW061, or techno-commercially equivalent in Legrand/Anchor Roma

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW161, or techno-commercially equivalent in Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKSWW063,or techno-commercially equivalent in Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKCWW163, or techno-commercially equivalent in Legrand/Anchor Roma

S & F concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX01/02, or techno-commercially equivalent in Legrand/Anchor Roma

S & F concealing modular metal flush box suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX03, or techno-commercially equivalent in Legrand/Anchor Roma

S & F concealing modular metal flush box suitable for fixing switches/sockets of 4 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX04, or techno-commercially equivalent in Legrand/Anchor Roma

S & F concealing modular metal flush box suitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACTXMIIX06, or techno-commercially equivalent in Legrand/Anchor Roma

S & F modular cover plate suitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV01/02, or techno-commercially equivalent in Legrand/Anchor Roma

S & F modular cover plate suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV03, or techno-commercially equivalent in Legrand/Anchor Roma

S & F modular cover plate suitable for fixing switches/sockets of 4 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV04, or techno-commercially equivalent in Legrand/Anchor Roma

S & F modular cover plate suitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVPPCWV06, or techno-commercially equivalent in Legrand/Anchor Roma

S & F internet socket RJ-45, suitable for CAT 6 cable , sheilded, folded metal 1 module complete all as specified and as directed. Make :Crabtree, Cat No: ACVKJWW451 or techno-commercially equivalent in Finolex/Legrand

S & F Telephone Socket RJ-11,sheilded, folded metal 1 module complete all as specified and as directed. Make:Crabtree, Cat No:ACVKRTW111 or techno-commercially equivalent in Finolex/Legrand Note for Item Nos 55 to 69 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S & F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/CG/Anchor

S & F in repairs call Bell, AC, Buzzer Ding Dong type 230 Volt complete all as specified and as directed. Make: Anchor, Code-8432 or techno-commercially equivalent in Legrand/Havells

S & F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings complete all as specified and as directed. Make : Havells, Cat No: ENDURALINEARNE OBS10WLED865SPCWH or techno-commercially equivalent in Wipro/Philips.

S & F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings complete all as specified and as directed. Make : Havells, Cat No:ENDURALINEARNEO BS20WLED865SPCWH or techno-commercially equivalent in Wipro/Philips.

S & F, IP >= 20, Class I, recess mounting LED square shape slim ceiling light fitting 42 W or next higher rating, CRI >= 80, CT >= 5700 K, suitable for 600 x 600 mm (approx dimensions) suitable for modular Grid/Armstrong ceilings, integrated type, with high efficiency electronic driver, surge suppressor of 2 KV or more & high brightness LEDs, luminaire efficacy > 95 lumens/Watt, power factor >= 0.90, operating range – 140 to 270 V, 50 Hz with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Havells, Cat No : PLUTONEO2X2PLR 42WLED857S or techno-commercially equivalent in Wipro/Philips.

S & F wall mounting decorative Picture light of rating 12W, 3000K warm white with aluminum die cast body and PC diffuser with all fixing arrangement complete all as specified and as directed. Make: Luker, Cat No : LMCL 12 or techno-commercially equivalent in Philips/Havells.

S & F ultra modern, Surface mounted, 18W, 6500K LED Elegant surface panel complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Luker, Cat No: LNPSRR18 or techno-commercially equivalent in Philips/Havells

S & F decorative wall mounting fixture luminaire with PC diffuser suitable for lamps with B22 with all accessories internally prewired and including necessary wiring/cabeling alterations to make the fitment completely compatible for use as Engagement light & connecting up complete all as specified and as directed. Make: Havells, Cat No:LHFOAJE2TZ1I060, Model - Florentine or techno-commercially equivalent in Wipro/Philips.

S & F in repairs LED Rojo lamps of rating 7W, red lamp with B-22 base cap complete all as specified and as directed. Make : Havells, Cat No: LHLDBWEB4P8R007 (RED LAMP) or techno-commercially equivalent in Wipro/Philips

S & F in repairs LED Rojo lamps of rating 7W, green with B-22 base cap complete all as specified and as directed. Make : Havells, Cat No: LHLDBWEB4O8R007 (GREEN LAMP) or techno-commercially equivalent in Wipro/Philips

Note for Item Nos 72 to 79: (i) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. (ii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. (iii) LM 79 & 80 reports to be submitted by the contractor to the Engineer in Charge for LED fittings/ fixtures.

Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates

S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equivalent in Legrand/Siemens

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN008DD or techno-commercially equivalent in Legrand/Siemens

S & F SPN DB, 4 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed. Make: L&T, Cat No: DBSPN004DD or techno-commercially equivalent in Legrand/Siemens

S & F MCB, SP, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA complete all as specified and as directed. Make: L&T, Cat No: BB10400C or techno-commercially equivalent in Legrand/ Siemens

S & F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No: BB20320C or techno-commercially equivalent in Legrand/ Siemens

S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make: L&T, Cat No: BB10320C or techno-commercially equivalent in Legrand/ Siemens

S & F MCB, DB, TPN, 06 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN006DD or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, DB, TPN, 12 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN012DD or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB30630C or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40630C or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TPN, 10KA, 415V, "C" curve, 100 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU15S41003C or techno-commercially equivalent in Siemens/Legrand.

M & L for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI strip of size 32 x 6 by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified and as directed. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge. Make of GI Pipe : TATA/Jindal/Prakash

Supply and laying on wall floor etc.,through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Unarmored, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 70 Sqmm incl connecting with suitable glands, lugs etc complete all as specified and as directed. Make: Havells/Finolex/Polycab. Note: Cost of clamping with MS/ Aluminum clamps at every 1 mtr spacing of the cable when laid/fixed on walls, floors etc., is deemed to be included in the unit rate quoted.

GMS Builders

Shree Amritha builders

K.AYYAPPAN