PROVN OF TOILET BLOCK FOR JCOS/ OR AND GIRLS HOSTEL FOR SCN UNDER GE (WEST) JRC

Amount

Surface dressing not exceeding 15cm deep in soft/loose soil. complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in soft/loose soil for foundation, not exceeding 10 Sq.m area on plan and for similar works and getting out complete all as specified and as directed by the Engineer-in-Charge.

All as per ser item No 2.00 here-in-before but for each additional 1.5m or part thereof in depth beyond the first 1.5m

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed.

Material and labour for brocken bricks Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and Labour for PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and under floor, sub base etc., complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B-2 (using 20mm graded stone aggregate) as in floor finishes, post holes concrete etc complete all as specified and as directed.

Material & labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work finished even and smooth with out using extra cement complete all as specified and directed

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer all as specified and directed.

Material & labour for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work, finished even and smooth with out using extra cement complete all as specified and directed

Material & labour for preparation of newly plastered surface of walls and applying two coats of oil bound distemper(white or tinted) over a coat of chalk whiting primer complete all as specified and as directed.

Material and labour for TMT bars 12 mm dia and over cut to length bent to shape reqd. including cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (Design mix), using 20mm crushed gared stone graded aggregate in footings, foundation beams; plinth beams; bases for columns etc. complete all as specified and directed.

Material and labour for reinforced cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) in Chajjas complete all as specified and directed.

Material and labour for reinforced cement concrete type B1 1:2:4 (using mm graded stone aggregate) as in precast RCC manhole/ septic tanks, drain, covers including all form work and setting in cement mortar 1:4 complete all as specified and directed.

Material and labour for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and as directed.

Supply & fixing 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement in any position complete all as specified and directed.

Supply & fixing 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

All as per ser item No 25.00 above but for 20mm bore tube

Supply & fixing Brass CP mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and as directed

Supply & fixing Bib tap fancy type cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete

Supply and fixing pillar tap, fancy type, CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified.

Supply and fixing 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed.

Supply and fixing 20mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

Supply and fixing vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.

Supply and fixing 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white, and connection to drain (or outgoing pipe) and connection to flushing pipe, anti-syphonage pipe, (excluding flusing cistern and flush pipe) etc complete all as specified and as directed.

Supply and fixing vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and as directed.

Supply and fixing vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, etc all as specified and directed.

Supply and fixing brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.

Material & labour for Non skid Coloured ceramic tiles 7 to 8 mm thick (square or rectangle) area of each tile exc 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with including screed bed in CM 1:4, 15mm thick for laying floor tiles,haucking old concrete surfaces and applying cement slurry 3.0 kg per Sqm.

Material & labour for Glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in cement mortar (1:3) 15mm thick complete all as specified and directed.

Supply & fixing 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive to wall/laid in trenches complete all as specified and directed.

Supply & fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

Supply & fixing 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

Supply & fixing in repairs PTMT grating 150mm dia (Min weight 100 gms). complete all as specified and directed.

Supply & fixing Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

Supply & fixing PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing.

Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

Supply & fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate

Supply & fixing Aluminum anodized barrel tower bolt of extruded section of size 150mm

Supply & fixing extruded Aluminum alloy handle fabricated of size 150mm

Supply and fixing of PVC (SWR) junction single (single Tee) equal or unequal, dia of pipe 75mm complete all as specified and directed.

Supply & fixing 15mm stop valves/Angle cock , chromium plated fancy type, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Material & labour for PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete all as specified and directed.

Material & labour for 40 mm thick Damp proof course in Cement Concrete 1:2:4 type B-0 in horizontal/vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen @ 1.5 kg/Sqm and blinding with clean dry sand @ 0.05 cum /sqm

Material and labour for Cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in foundations, mass concrete complete all as specified and directed.

Material and labour for Reinforced concrete pipes, class NP2, laid and jointed complete with collars with bore of pipe 150mm complete all as specified and directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to open and rendering, cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour for 80 mm thick M-35 factory made machine pressed precast inter locking paver block any size and shape as approved conforming to IS-15658-2006 laid over and including consolidated layer of sand 25mm thick (compacted thickness) and the joints filled with fine sand complete all as specified and directed.

Material and labour for Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 using (20mm graded aggregate) as in benching and the like weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

Material and labour for mild steel roof trusses (framed) trussed, purlins, rafter etc fastenings and heavy brackets framing (Beam, Tee Angle, channel or flat sections) including distance pieces, cleats, gusset plates etc. confirming to Fe-410-S or Fe-310-S complete all as specified and directed by Engineer in Charge.

Material & labour for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply & fixing pressed steel door frame of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

Supply & fixing 2nd class hardwood 35 mm thick factory made plain, framed, panelled shutters (two panels) with lock rails and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS:1003(Part 1), kiln seasoned and chemically pressure treated all as speicified and as directed

Material & labour for preparation of new wood and wood based surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Material and labour for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in mass concrete and bed block for filling of pressed steel chowkhat complete all as specified and directed.

Suppy & fixing for Plates (chequered), square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W (Gde-'E' 250 quality 'A') all as specified and as directed.

Supply & fixing steel windows/ ventilators 1.25mm thick box type (primer coated) ERW hollow 'P' section of size 60m x 25mm single rebated comprises of gauged skeleton shutter EWR sec 50mmx20mm and 1mm thick two openable leaf consisting two nos sash bar of 'T' section 20mm x 3mm complete welded to frame with one vertical mullian of EWR box 'T' section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1. Four Nos for each window including following fitings welded to frame of shutter :- (a) Hold fasts 150mm long 12mm x 3mm made to shape -04 Nos per window (b) Handle of Z section 20mmx 25mm, 100mm long -01 Nos per leaf (c) MS Tower bolt 150mm long 02 Nos per leaf (d) Z sec 20mm x 25mm, 100 long stopper-01 Nos per leaf (e) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges-01 Nos per leaf (f) MS pintal hinges of size 75mmx 12mm - 02 Nos per leaf (g) Fabrication and fixing arrangement as per drawing no CEJZ/TD-06/07

All as per ser item No 72.00 above but with glazed shutter

Material & labour for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, including hacking out of broken glass complete all as specified and as directed.

Supply & fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply, laying, jointing and testing 15mm bore galvanized iron steel tubing medium grade with all fittings such as bends, elbows, sockets, tees, reducers etc, fixed to walls, ceiling or laid in floors, including cutting through walls/ making hole in RCC slabs for vertical pipes and making good the surface with cement concrete (1:2:4) complete all as specified and as directed.

All as per ser item No 76.00 above but for 20mm bore

Construction of Septic tank of capacity 50 users as per table - 10 of Drg No, CEJZ/STD-242/07 sheet No 1 to 24 including necessary excavation and removal of soil upto distance n exc 500 mtr complete all as specified and directed.

Construction of Soakage well of internal dia 2.4 mtr and effective depth 4.5 mtr as per table - 5 of Drg No CEJZ/STD-242/07 sheet No 1 to 24 including necessary excavation, Use and waste of timbering as planking and strutting for excavations in shafts well ,cesspits etc in soil, and removal of soil upto distance n exc 500 mtr complete all as specified and directed.

Material & labour river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cable which is to be punned down to 10 m all as specified and directed. (Note :- only punned thickness shall be measured)

Supply and laying burnt bricks sub class 'B' using old size bricks laid across the cable in trenches as protection to the cable all as specified and directed.

Supply and laying GI tubing light grade 40mm bore with all necessary fittings laid in trenches, under road crossing in floors or fixed to poles/DB for cable protection etc complete all as specified and directed.

Supply and laying pipe galvanized, "Medium class", including fittings 40mm (1.5") dia

Supply and laying pipe galvanized, "Medium class", including fittings 20mm (3/4") dia

Supply and fixing valve, stop, screwed, 20mm (1.5") dia pipe (3/4") dia

Supply and fixing valve, stop, screwed, 40mm (1.5") dia pipe (1/5") dia

Material & labour for drilling and tapping cast iron water main (in position) for branch connections of the internal dia 20mm complete

Making/ boring hole under road/ pavement/ hardstanding with the help of bookies suitable for passing LT cable/ pipe (any type) upto 100mm bore not less than one mtr below ground level including required earth work (GI/ LT cable shall be measured and paid separately)

Material & labour construction of brick masonry valve pit of size 0.60x0.60x0.60 mtr (inernal dimension) including earth work and excavation of any type of soil and disposal of surplus soil to a distance not exceeding 50 mtr away from the site incuding plastering internally in cement mortar (1:4) and flush pointing on brick work externally as the work proceeds in the same mortar with angle iron frame 40x40x6mm, hold fast MS sheet cover 3.15mm thick, handle hinged to frame and locking arrangement including black synthetic enameled paint duly painted over a coat of red oxide primer including dismanting of existing pit complete all as specifed and directed.

Material & labour for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including piano type cover plate white colour all as specified and directed for: One light / fan / call bell point controlled by one, one way switch.

One 3 pin socket outlet 5 Amp on same board with other switches

One 3 pin socket outlet 5 Amp on independent board with other switches

All as per Ser item No. 90.00 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board

Supply & fixing switch piano 5 Amps, SP, flush button type, one way, 230 Volts, AC

Supply & fixing switch piano 15 Amps, flush button type, single pole, 230 Volts, AC

Supply & fixing socket out let multipurpose 5 pin 5 Amps, flush type, 230 Volts complete

Supply & fixing socket out let multipurpose 6 pin 5/15 Amps, flush type, 230 Volts complete

Supply & fixing ceiling rose surface bakelite 65 x 50 mm with three terminals complete all as specified.

Material & labour in replacement for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor, FRLS type cable drawn through and including PVC concealed conduit of not less than 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor, FRLS type cable as earth wire. (Three runs of cable and one run of conduit shall be measured as one length)

Supply, installation & commissioning MCB load distribution board TPN 4 way double door, for mounting DP/SP/TP/MCBs/MCCBs as incoming/outgoing, factory made, conforming to IS, fabricated out of CRCA sheet, fitted with DIN channel, neutral link and suitable rates bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DP/SP/TP MCB shall be of same make as DB. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed.

Supply & fixing MCB TPN 63 Amp, 4 pole, 16KA 415 Volts complete

Supply & fixing in repairs DB, SPN 8 way double door for MCB, 240 volts with 200 Amps rated bus bar

Supply & fixing MCB SPN 40-63 Amp, 240 Volts complete

Supply & fixing MCB SP 6-32 Amp, 240 Volts complete

Suply & fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20 Amp complete all as specified and directed.

Supply & fixing in LED tube light fitting 20W (double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (white light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed.

Supply & fixing in LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexibel copper conductor cable of suitable size complete.

Supply & fixing in repair LED street light fitting 30W including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core including GI pipe 32mm light grade 0.9 mtr long bent to L shape in 02 Nos of GI clamps of size 25x6mm of length 25mm with nuts, bolts and washers complete all as specified and directed.

Material & labour Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings incl 01x 9 Watt LED bulb complete all as specified and directed.

Material & labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe light grade', watering pipe 20 mm dia GI 'light grade', GI wire mesh funnel, alternate layer of char coal and salt on all side to earth plate as specified, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation and earth work, testing the earthing after complete all as specified and directed.

Supply, fixing, connecting and testing energy efficient (five star rated) electric water heaters vertical storage type of capacity 25 ltrs with powder coated body, inner tank and inner assemble made of ultra thick superior cold rolled steel having high density puf insulations with ISI accessories such as thermostat switch having adjustable knob for temperature setting, heating element, pressure safety valve, indicators, 15mm bore, 450mm long PVC connections ISI marked for inlet & outlet including fixing to wall with suitable size MS bolts, nuts complete all as specified and directed.

Supply & fixing in repair exhaust fan metallic body, 300mm sweep, 900 RPM, single phase, 230 volt, heavy duty with louvered shutter including provision of three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, all as specified and directed.

Supply, laying, jointing and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (Heavy duly) with stranded aluminium conductor cross sectional area 25 sqmm 4 core suitable for working on 1100 Volts earthed system, laid in tranches, in floor, in ducts, through pipe or along pole fixed as in repairs complete all as specified and directed.

BHARAT ENTERPRISES

M/S Vinod Kumar

PAUL CONSTRUCTION CO.

SARASWATI CONSTRUCTION CO