NIT- 06 (2020-21)/SDW-I , Item No. 1

Electrification work of Jal Vihar Colony dispensary by carrying out following work:- 1.15.3/3 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 Sq. mm FRLS PVC insulated copper conductor single core cable as earth wire in exiting surface / recessed steel / PVC conduit including dismantling as required. Group – C.

1.7/2 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in exists surface / recessed steel conduit as required. 1.7.2 2 x 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

1.7.3 2 x 4 sq. mm + 1 X 4 sq. mm earth wire

1.7.4 2 x 6 sq. mm + 1 X 6 sq. mm earth wire

.29/7 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

1.30/7 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

1.25/6 Supplying and fixing single module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.33/7 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

1.58/10 Supplying and fixing brass batten/ angle holder including connection etc. as required.

1.38/8 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

1.41/8 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting / LED fittings of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required

1.44/8 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required

2.3/11 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). Double door 8 way.

2.10.1/12 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. In Single pole.

2.12.2/12 Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB complete with connections, testing and commissioning etc. as required. 63 Amp.

1.50/9 Installation of exhust fan in existing opening including making good the damage connection, testing, commissioning etc. as required upto 450mm sweep.

1.59/10. Dismantling of ceiling fan & painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand & manufacturer to given an even shade i/c cleaning of surface with detergent & replacing the damaged reel, nut & bolts with washer & safety pins reinstalling the same as required.

5.2/26. Earthing with GI earth pipe 4.5 mtr. Long 40mm dia i/c accessories & providing necessary enclosure with cover plate having locking arrangement & watering pipe etc. with channel / coke & salt as required.

5.7/26. Supply & laying 6 SWG GI wire at 0.50 mtr. below ground level for conductor earth electrode i/c connection / termination with GI thimble etc. as required.

Market Rate. Providing of decorative ultra slim energy efficient environmental friendly high voltage LED lighting fixture with high lumens output ready to use 4’ size in 24/25 watt rating. (Make:- Havells / Crompton / Phillips / Bajaj).

Providing of Exhaust fan 12” size, 3 blade metallic, motor speed 1400 rpm, 60 watt power consumption. Make:- Crompton / Havells / Bajaj.

Providing of 36 watt, 2x2 feet size efficient LED recessed, white powder coated CRC housing suitable for Armstrong / grid ceiling complete unit with driver etc. make:- Crompton / Havells / Bajaj / Philips.

Providing of 72 watt, LED street light fittings with pressure die cast housing with toughened glass & individual LED with secondary optics & IP66 protection. Make:- Crompton / Havells / Bajaj / Philips.

10mm2 2 core aluminum armored power cable 1100 volts as per IS 7098 (Part-I) 1980 with upto date amendments Make:- Grandley / CCI / Gloster / DJB approved make.

Dismantling and making good the damage with cement mortar i/c minor reqd. items complete in all respect.

ztp corporation

GOGIA BROTHERS