Construction of Punjab innovation centre at kalkat bhawan Mohali including civil work interior decorative public health service fire fighting system electrical works av system hvac system other works according to project

Amount

Aerated Autoclaved cellular concrete Providing and constructing steam cured Aerated cement light weight concrete block masonry work at all levels in cement mortar 1:4 using standard size and of thickness as given below, including all scaffolding, staging, curing, raking of joints for all lifts etc. complete and as directed. Rate shall include providing R.C. lintel in mix proportion 1:2:4, 75mm thick reinforced with 2 nos. of 8 mm dia Fe 500 bars with 8 mm dia TOR steel tie bars at 300 mm c/c, RCC lintel to be above door that is at 2700mm from finished floor level, including cost of reinforcement and formwork, scaffolding, all labour, hire and fuel charges for all tools and plants employed, proper cover blocks for reinforcement and all other incidental charges etc., all complete and as directed. Make: Biltech , Laxmi, Birla 200 thick Solid Block Masonary 150mm thick Solid Block Masonry 100mm thick Solid Block Masonry

PLASTERING WORKS Providing 12 mm thick plastering to masonry walls,in cement mortar of 1:6, finishing at all levels,applicable, curing etc., complete. The Plastered surface should be ready to receive Primer / Tile Dado as per the requirement. The work shall include cost of materials, cost of labour, Hacking concrete surface, All lead and lift, loading and unloading, transportation, scaffolding and all other incidental charges etc., complete. The work shall be carried out as per the directions of the Engineer In charge.

200 mm Cinder Filling Providing Cinder filling to a depth of 100mm - 200 mm and finishing the surface with average of 40mm thick screed of 1:2:4 in proper level including cleaning the substrata,curing.leads & lifts etc.The layers shall be compacted by using mechanical viberators, trowelled using mechanical float to acheive smooth surface and allowed to set, complete in all respects as per approval of the Project Manager. Location : Washing area

Water Proofing for floorProviding and applying waterproofing to SUNKEN Slabs & wall surface of 450 mm height by providing & applying a brush applied cementitious Brush bond in 2 coats @ 1mm thick over the cleaned - plastered surface. The rate to be inclusive of surface preparation, curing testing etc. complete. The rate to be inclusive of 12mm thick protective plaster coating in cement mortar 1:3. The surface to be kept ready to take on cinder filling. The treatment to be carried out 450 mm high over the wall. Note: All core cuts, proper sealing of core packing of the pipes to be done before waterproofing. Rate to include necessary grouting / core packing / cleaning ,etc as per the site / architects / PM instructions.

Brick tile cladding Providing and laying 12mm thick machine cut brick tiles. on the existing wall/concrete wall or bison board panelling. with mortar and adhesice as required. the tiles to have uniform 12mm mortar grooves on all sides. The total surface to be finally cleaned and painted as per approval.

PARTITION AND PANELLING WORKS G I FRAME WORKS FOR PARTITION /PARTITION ABOVE FALSE CEILING Providing and fixing GI Frame work of 48 mm studs ( 0.55 mm thick, having one flange of 34mm and another flange of 36 mm) for vertical members and U-channels (0.55 mm thick, having equal flanges of 32 mm) for horizontal members placed at 610 mm centre to centre both ways with joints staggered to avoid through joints. The frame work is to be adequately anchored in ceiling and on floor having additional framework of rough wood treated with anti-termite and fire retardent paint for fixing storages, fire extinguishers paintings, switch boxes, door frames etc. complete staright & curved.Make: Gyproc , BORAL,India Gypsum

Providing and fixing GI Frame work of 70 mm studs ( 0.55 mm thick, having one flange of 34mm and another flange of 36 mm) for vertical members and U-channels (0.55 mm thick, having equal flanges of 32 mm) for horizontal members placed at 610 mm centre to centre both ways with joints staggered to avoid through joints. The frame work is to be adequately anchored in ceiling and on floor having additional framework of rough wood treated with anti-termite and fire retardant paint for fixing storages, fire extinguishers paintings, switch boxes, door frames etc. complete staright & curved.Make: Gyproc , BORAL,India Gypsum

Providing and fixing hard wood frame for partition work of section 50 mm x 50 mm with anti-termite and fire retardant paint for fixing storages, fire extinguishers paintings, switch boxes, door frames etc. complete staright & curved. Spacing 600 x 600mm

ACOUSTIC INSULATION Providing & fixing Acoustic insulation to G.I./Wooden frame partition of 50mm thick Rock Wool of approved make of density 36-48kg/m³ blanket wrapped in RP tissue suitably affixed to partition framework using where necessary GI binding wire, duct tape as indicated in the drawingMake: Rockwool India.

Gypboard CladdingProviding and Fixing two layers of 12.5 mm thick Gyp-board cladding (confirming to IS -2095-1982 and 2542 - 1981 ) over GI framework screws fixed with dry wall screw of 25 mm for first layer and 35 mm for second layer at 300 mm center with joints staggered on each layer to avoid through joints. Square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, paper tape and two coats of primer suitable for Gypboard. The external angles of the partition having gyp-board has to be protected by using angle beads (25 x 25 x 0.5 ) and all the exposed edges of Gypboard have to be protected by using edge bead (25x12.5x0.5). The item also includes providing two coats of primer (as per recommended practices of India Gypsum) (GI framework will be paid separately). Make: Gyproc , Boral

Providing and fixing 12.5mm thick (Single layer) Gyp board cladding over G.I. frame work fixed with dry wall screws of 25mm at 300mm centre, square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with jointing compound, paper tape and two coats of primer suitable Gyp board. The external angles of the partition having Gyp board has to be protected by using angles, beads (25x25x0.5) and all exposed edges of Gypboard have to be protectededge bead 25x12.5x0.5). (GI frame work will be paid separately)Make: Gyproc , Boral

PROVIDING ADDITIONAL LAYER OF:-Extra for over and above of Item 1 for providing additional layer of 12mm thick MDF board screwed/ nailed on one side of partition.Make: Century , Green Extra for over and above of Item 1 for providing additional layer of 12mm thick MDF board screwed/ nailed on one side of partition.Make: Century , Green

Extra for over and above of Item 1 for providing & fixing additional layer of 12mm thick BWP ply screwed/ nailed on one side of the partitionMake: Century , Green

Extra for over and above of Item 1 for providing additional layer of 12mm thick bison board screwed/ nailed on one side of the partitionMake: Century , Green

Providing router cut patterend MDf board 19mm thick. Finished with duco paint as per approval. Of euro make base rate @1200 per sq.mt.

Laminate Panelling Providing and fixing 1.0 mm thick laminate of approved quality in panelling pasted over 12mm thick MDF/plywood fixed on GI frame work of partitions (GI / wood frame work payable separately) including providing grooves complete as per design and drawing the structure could be straight or bent .

Providing and fixing panelling on brick wall with approved 1.0 mm thick laminate of approved quality in panelling pasted over 12mm thick MDF/ plywood with internal soft wood frame of adequate and approved section and size placed at 600 mm centre to centre bothways treated with antitermite and fire retardent paint including grooves. complete as per design and drawing.

Tack Board Providing and fixing tack board made of 12mm thick cellotex board fixed with soft wood frame work treated with anti-termite and fire retardant paint & 6mm thick commercial ply backing covered with fabric fixed to wall with screws surrounded with Maple wood moulding with melamine polishing etc. complete as per design and drawing. (basic rate of fabric to be taken as Rs. 500 per metre).

Same as above with Fabric as Rs. 1000 per mts.

Mirror Panelling Providing and fixing mirror paneling in areas indicated using 12mm thk Marine ply backing/boxing of depth 75mm over 8mm thk.'pre-approved' mirror (Saint gobin make or manufacture, as specified by Architects/Clients). The mirror panel to be fixed with SS steel flush studs or heavy duty 3M adhesive tape as per design and detail all complete as per the instructions of the architect. All edges of the mirror paneling to be finished with 6X6mm builder box anodized L-shaped channel. All exposed edges of the ply to be finished with 1mm thick laminate of approved shade and color. For the areas where frame is not specified beveled edges of mirror to be considered. Cost to include play backing.

Basic Cost:Rs 1105 per sqm inclusive of taxes Make:Saint gobain

Gypsum Board Panelling Providing and fixing column panelling with 12.5mm thick gypsum board with adequate softwood frame work treated with anti-termite and fire retardent paint fixed on existing columns at 600 c/c bothways including finishing to take on wall paper and adequate backing to aluminium skirting . complete as per design and drawing.

Wooden Jamb Providing and fixing wooden jamb made of 4mm thick maple wood veneer/1.0mm thick laminate cladded on 19mm thick BWP ply fixed to wall with necessary nails/wooden plugs including all nails maple wood wood lipping, melamine polishing, wood preservative paint, Maple wood architrave on both faces etc. complete as per design and drawing.

Laminated

Fabric panelling FABRIC PANELLING (Meeting & conference room) :- Providing and fixing over 12mm thk MDF board with 3mm foam backing with 50mm beech wood reveals fixed over existing partition . (Basic rate of fabric to be taken as RS. 600 per mtrs.

Wooden Pelmet Providing and fixing wooden pelmet Minimum drop in pelmet to be 300mm and width upto existing mullion. The area between the glass and mullion at pelmet level also to be covered with same plywood made of 19mm thick BWP board with kail wood framing from true ceiling including painting, all nails, screws , wooden lipping etc complete as per design and drawing. Cost to include the cost of 12mm ply boarding painted black from outside) above the pelmet till the nearst slab or beam.

Laminated wooden Fins Providing and fixing laminated fins made of plywood cladded with laminate of size 100mm x 50mmx2400mm @ 100mm clear spacing. Fixed to floor and ceiling .

Providing partition wall made of plywood and cladded with laminate on both sides. Partition of thickness 150mm. With partition to act as divider between meeting rooms. The partition as per design and image.

Wall papers Skinning Providing and applying Imported patterned wall paper on partitions/walls all inclusive with complete application and protective covering until handover cost to include surface preparation (Base to be fished with low VOC oil paint) to receive the wall paper.) Base rate of wall papaer @ 150 per sq.ft.

Lacquered Glass Paneling Providing and fixing Skin of 6mm thk Glass Writing Board toughened laqured glass, fixed to the base skin (12mm thk. play on column & meeting rooms) glass to be fixed on to the Plywood with compatible neutral cure silicon sealant( GE Winsil/Dow corning), Make: Saintgobain , Modiguard , Asahi

Sliding and folding Acoustic partition Providing and fixing Veriflex Sliding and folding Acoustic partition up to false ceiling level (MANUAL) consisting of series of individual flat elements of 80-100 mm thick travelling along the ceiling track assembled to form a solid wall. The sound insulation of the operable partition should be 36-40db. Elements must be constructed of a torsion-free steel horizontal tube frame and torsion-stiff vertical aluminium profiles, bolted together to make the element strong and sturdy. The frame must be clad either side with 12-16mm MDF panels hung in acoustic free suspension from the panel frame. The elements must be inter-connected by means of a positive locking tongue & Groove or concave/convex aluminium profile with an integrated magnetic strip and sealing lip. Each element must have a spindle mechanism which should be connected to the spring loaded top and bottom retractable seal. The spindle mechanism should be operated manually by a bayonet connected crank handle that acts as a lock in function during cranking process. The horizontal top and bottom seals must be extended manually by crank handle and should ensure a contact pressure of 800N when the seals are completely extended. No fixed sweep seals allowed in top and bottom of the element that would rub against the track or floor while moving the element. The telescopic element or the end closure element must open and close 120mm horizontally. The movement of the telescopic panel and the operation of the horizontal top and bottom seal and must be operated by a single mechanism. Each element must be suspended from the track capable of withstanding the load of the element. The elements shall run with the help of steel clad, multi directional rollers on a 80-100mm thick aliminum extruded track capable of taking a weight of 500 kgs/ element. Panel should be stacked in center stacking position. After installation of tracks, a sound barrier should be erected between the RCC and the false ceiling. Quote without the Sound Barrier as this Item is paid for seperately in the relevant Item. Suggested Brands : Dorma / Lotus / Geze

Sliding and folding Glass partition DORMA FSW-G sliding folding glazed partition system  Manual top hung sliding folding glass partition system consisting of running track and one of the following configuration options: 2 No. folding panels  4 No. folding panels - 2 left / 2 right  4 No. folding panel in one direction  8 No. folding panels - 4 left / 4 right  6 No. folding panels - 4 one direction / two opposite direction.  2 No. folding panels one direction / 1 No. pivoting end panel  4 No. folding panels one direction / 1 No. pivoting end panel 10mm Toughened safety glass Extruded aluminium profile running track Extruded aluminium top and bottom rails clamped to toughened glass panels comprising of base rails, clip on decorative covers and end caps. Panels secured in closed position by either chute bolts or cylinder locking into floor mounted keeps. End panel hung on top pivot and controlled by DORMA BTS 80 floor spring (Option) Sliding folding panels hung from purpose made roller assemblies consisting of composite multi-directional rollers with non-corrosive engineered carriers and connected by purpose made hinges (and fitted with pulls - option) Aluminium Profile Finish

FLOORING & CLADDING WORKS CARPET FLOORING

For Meeting rooms

Supply of Nylon 6 or equavalent carpet tile collection with the following specification. The quoted rate to include covering of carpet with 2 layers of polythene to protect after installation. The vendor to ensure that propoer protection is done till the carpet and floor is fnally handed over.

Construction - Tufted textured loop pile/multilevel pattern cut

Yarn type -100% Nylon 6 or Approved Equvalent

Dyed Method - 100 per solution dyed

Gauge - 1 / 10 or 1/12

Face weight - 410 gms/sq.mt

Tufts - 2230.3/100sq.cm.

Stitches per inch - 14.4

Primary backing - non woven

secondary backing - PVC -free comfort plus

PILE HEIGHT - 0.24 inch

Density factor - 197120.75

Finished pile thickness-3.5mm

Average density - 7.75 kilotex

planked tile 250mm x 1000mm or 500x500 mm or 600 x600 mm

Gaurantee - Lifetime warranty

quote to include 1 time dry cleaning of carpet after laying and hot water extraction of the carpet after 7 days of final handing over

Base Price: Rs.180 /sqft.

Approved Make SHAW, Interface, Modyllus

Providing & Laying Stone flooring 18mm thk.Stone with 20mm thk. Cement bade mortar in Reception Area ( Basic rate of Stone 355/per Sq,ft)

Antistatic Vinyl Flooring Providing and laying in position 2mm thick antistatic homogenous vinyl sheet flooring of approved shade and quality to floor with adhesives, including thermo welding of joints etc. complete as per manufacturer's specifications. Cost of levelling as required to be included in the quoted rate. Base rate of vinyl RS. 1000 PER SQ.mT.

Providing & Fixing 450mm / 300mm high raised flooring (Make unifloor) in Server Room and UPS room

Vitrified Tile Flooring (Pantry & washing area) Providing & Laying Vitrified tile flooring (600x600) in pantry (Basic rate of tile 95/-per Sq,ft)

Vitrified Tile Cladding High lighter tile of size 600 x 300mm (Basic Rate of Tiles Rs.1500 per SQM + Taxes.) Location : Pantry

Vitrified/ ceramic Tiles 600 x 300 mm./800x400 (Basic Rate of Tiles Rs.700 per SQM + Taxes.) location: washing area

Vitrified Tile Dado Providing and laying 9.5 mm thick vitrified tiles of approved quality and shade for dado over a bed of 12mm thick cement mortar 1:4 (icement : 4 coarse sand) , laid to patterns with 2-3 mm grooves , including necessary cutting, mitring, grouting of joints with 'BAL' epoxy based grout (grey) / white antifungal grout applying silicon sealents between the junction of floor & wall, etc., complete as per detailed drawings at all levels.

Aluminium profile Skirting Providing and fixing aluminium skirting 50mm high screwed with concealed screws onto the existing partitions/ walls. rate to include the rate for base ply if required and propoer finishing and edge terminations. including all necessary nails, screws, adhesive, fire retardant paint, etc. complete as per design and drawing. Approved Make : harmony/ bottomline. base rate:Rs. 250/- per mts

FINISHING WORKS

ACRYLIC EMULSION PAINT

Providing and applying three coats of pre-approved acrylic emulsion paint to walls, partitions etc. including surface preparation with two coats of putty, primer and sanding all complete. With the necessary drying periods for each coat. The final finish should be of a uniform and neat finish to the satisfaction of the Architect. Cost to include all heights and surfaces.(Low VOC content paint) (Note: Some areas are double height and all rates to be inclusive of scaffolding for the same. surface area shall be measured and paid.

OIL BASED PRIMER

Providing & applying of oil based primer for existing Partitions/Walls to receive the graphics as per the detail drawings complete.

Location : Gypsum Partitions/ceiling, existing walls, Perimeter Walls, wall above Glass & Doors make asian paint or equivalent

Make : Asian, Dulux, Berger

POP PUNNING

Providing and applying of Plaster of Paris Punning (1st Quality ISI approved POP) over plastered with minimum thickness of 8mm-12mm to existing wall surfaces , column & concrete members etc., to be finished in line and plumb with smooth surface ready to receive paint base. Rate to be inclusive of hacking wall surfaces for better bonding, cleaning, scrubbing the surface, providing grooves if necessary etc., complete as per architect's approval. make india gypsum

Location :Block Walls & Perimeter Walls

Paint for exposed ceiling areas

Painting of existing RCC slab with Plastic emulsion texture paint from Asian /dulux paints or equivalent . Cost to be inclusive of grinding the surface to make smooth ,two coats of putty and remove defects before applying paint.

Approved make- Asian/ Dulux/Burger

Painting of ducts & raceways

Providing and applying Two coats of DUCO paint to all AC ducts including preparation of surface by thorough cleaning and as per manufacturer specification to give a smooth and even surface etc. complete.

FALSE CEILING WORKS

GRID CEILING

Mineral Fiber Modular Ceiling. 1200x300 (0.7 NRC Classic lite) Providing & Fixing of Acoustical Suspended Ceiling System with e Humidity Resistance of 90% RH, Average NRC .0.7, Light Reflectance >80%, Thermal Conductivity k = 0.052 – 0.057 w/m°c, sound attenuation lvl of 34-40 DB+, Color White, Fire Performance Class 0/Class 1 (BS - 476) in module size of 600mm x 600mm x 15The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ?85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 63%. The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 38mm and a load carrying capacity of minimum 11.25 Kgs/M2 & pull out strength of 100Kgs. Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile & Grid system used together should carry a 30 year warranty. mm laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white color. Silhouette, Main Runners & Cross Tees to have mitered ends & “birdsmouth” notches to provide mitered cruciform junctions.

MAKE - Armstrong, USG, AMF

GYPSUM FALSE CEILING :- Providing and laying false ceiling which includes Zincalume/ Galvanized coated perimeter channels of size 0.55mm thick (having one flange of 18mm and another flange of 30mm and web of 28mm) along with perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending Zincalume/ Galvanized coated Universal Channels (to be use as main channel) of size 45mm (0.55mm thick with two flanges of 27mm each) from the soffit at 1220mm centres (First and last main channels are to be placed no greater than 300mm in from perimeter of ceiling) with L angle of width 24mm x 24mm x 0.55mm thick fixed to soffit cleat and steel expansion bolt.

Cross channel of size 45mm (0.55mm thick with two flanges of 27mm each) are then fixed to the Universal channels (main Channel) with the help of connecting clip of (0.80mm thick BMT ) and in direction perpendicular to the Universal channels (main Channel) at 457mm centres. Fix the Cross Connector (0.55mm BMT) in between the both the Universal Channel for extend the metal frame systems. Finally 12.5mm x 1220mm x 1830mm tapered edge board (conforming to IS-2095:1996) is then screw fixed to universal channel (ceiling section) with “type S” 25mm corrosion resistant screws at 230mm centres. Finally the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with easy jointing compound, joint paper tape (as per recommended practices of USG & India gypsum).

The rate to be inclusive of joining compound, paper tape and two coats of primer suitable for Gypboard (as equivalent) extra frame work for electrical fittings, A/C diffusers, and/or any other cutout, trap doors, wooden shadow battens (hollock wood black enamel painted-25x40mm) at wall peripheries and ends, 12mm thick MDF board for pelmet etc. complete including opening to be made for AC grills, light fittings, trap doors etc. (The quoted rate shall be inclusive of suspenders at all heights) (USG or India Gypsum make)

Trap Door

TRAP DOOR:- Providing and fixing KNAUF alustar access panel made of Knauf moisture resistant 12.5mm thk. Gypsum board in false ceiling of size 600mmx1200mm. This would include interior and exterior frame from stable aluminium profile, 3pc spring loaded snap locks and 2 pc. galvanised & coated 1mm saftey wire catch. The frame and trap door to be supported and fixed by glavanised steel connecting parts and phosphated screws complete in all respects.

ROLLER BLINDS Make: Winfab or equivalent

Technical Details: 5%

Composition: 30% Polyester / 70% PVC

Openness Factor: 5%

Thickness [mm]: 0.53 +/-5%

Width [mm]: 183/250/300

Mesh/In: 52x48

Breaking Strength: Warp>=1300 WEFT>=1200

Tear Strength: Warp>=20 WEFT>=20

Color Fastness: ISO 105 B01 Grade B

Anti-Ultraviolet: 95%

Fire Classification: NFPA 701-2004 TM#

BUILT IN JOINERY

Modular café and kitchen counter with under counter storages and over head with sink unit and necessary dawers. Caracuss made in water proof ply and laminated on all surfaces. Hardware of hettich

OVER HEAD STORAGES

Providing and fixing of Overhead storage unit formed of 19mm thick plywood formwork/carcass finished with laminate as per details. Shutters & intermediate shelves of cabinet to be formed of 19mm thick plywood finished with laminate of approved shade as per details.as per detail drawings complete and architect's / PM's Instruction. Storage to be complete with hardware installed as directed to consist of the following: Shutter to have ss hinges of approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. Each set of shutters to be provided with 1 no multi purpose lock as specified, auto bolt,etc. All exposed edges shall have PVC edge band, as per detail drawing and architects approval. Visible area elevation shall be considered for measurements.

Size : 450mm (D) (PANTRY)

Full Height Storage Unit 450mm deep

Providing and fixing of Full Height storage unit. The Counter top shall be formed out of 19mm thick ply finished with approved laminate, edge finished with 2mm PVC Edge band with 25mm high finger groove.storage shutter shall be formed of 19mm thk ply finished with approved laminate, edge finished with 2mm PVC Edge band.Intermediate shelf shall be formed out of 19mm thk ply finished with approved laminate.Provide necessary supports as per the detail drawings or Architects and PM Instructions.

Storage to be complete with hardwares like Auto Closing Hinges,installed as per the details and direction,etc.All exposed edges shall have PVC edge band, as per detail. Visible elevation area shall be considered for measurements.Vendor to refer the detail drawings while giving the quote.

P/F DB SHUTTERING

Providing and fixing of DB Shuttering formed of 19mm thk Ply shutters finished with 1mm thick approved laminate with powder coated Aluminum Louvers of size 300 mm x 150mm and necessary hardware complete as per details.

Providing & Fixing Medium Ht. Storage in laminate finish

Providing & Fixing Reception Table with total finish in wood and 12mm Corian 2800x750x1050mm with one pedental unit of 3 drawers. Cove lighting . Provision for wire mangement and extra rack to be provided for AV in the table.

Providing & Fixing Repro Counter 600mm deep

Providing & Fixing Low ht storage in Laminate finish 450mm deep

MISCELLANEOUS

White Board

Providing white board film from 3M. Pasted on existing finished MDF/ gypsum wall . Which is made smooth and ready for film application

3M White Board Film (Writable - Non Projectable)

Providing & Fixing 3M White Board Film WH-111, white, glossy, opaque film. Extruded polyster film with permanenent adhesive and hardcoat. The thickness of the film without liner to be 00.17mm with Grey, Solvent Acrylic , Pressure Sensitive adhesive with air release feature. (controltac & comply feature for direct, bubble-free application on smooth surfaces).

Microvave - Make : LG / Samsung 28L MC28H5033CK Microwave Oven

Tea Coffee Machine - Make: Nescafe / CoffeeDay - Model Indus

Supply Floor Matt

Natural potted plants in ceramic pots with evergreenindoor plants

Planter of 200mm dia

Planter of 300mm dia

Providing & Fixing Graphic

Providing & Fixing Frosted film

Providing & Fixing Panic Bar

Planter Box in laminate finish (300x750mm)

Providing & Fixing artificial grass carpet

Aluminium 4mm Groove profile

MINI WASTE PAPER BIN

a) 300-400 dia.perforated SS as per Architects approval.

b) Stainless steel dustbin of 60 ltr capacity with swivel type salem sheet cover

SIGNAGES

Meeting Room - Include braile letterings 12"x4"

Push Pull Signage (set of Two ) - 4"X3"

Fire Extinguisher Signage -Providing and fixing graphical Triangular signage for fire extinguisher. signage to be made of 3mm thick foam board with edge to edge self adhesive self-luminescent Forex or equivalent vinyl stuck on it. Fix Green vinyl to cover Forex vinyl leaving 6mm border around edges with 'FIRE EXTINGUISHER' letters cut-out. (Note : 'FIRE EXTINGUISHER' letters to be self-luminescent and not the background). 'FIRE EXTINGUISHER' letters height shall be 100mm in HT. 14"x8"

Evacuation plan( glow in the dark) as installed typically at sites. Specially made indivisual plans for each location nos each duly laminated.sanwich type dubble acrylic 4mm& 3mm - A-3 Size

Push Bar To Open Signage 18"x6"

Exit Indicator Signage 2mm milky white acrylic with silk screen print graphics approved color. 5"x30"

Break the glass signage - photo luminous exit signs 8"x6"

Providing & Fixing LOGO 3000x250 as per drawing aand specification

SITE OFFICE & GENERAL SITE CLEANUP

Site office & General site clean up (disposal of surplus dismentled material,cleaning &washing complete inall respects)

Glazing and DOOR WORKS

SINGLE GLAZED TOUGHENED GLASS PARTITIONS - WITH ALTERRA SYSTEM-100 FRAME PROFILES

Supply and installation of dormakaba ALTERRA Access and Cabin System for minimal frame, room dividing solutions.Single glazed mullion free demountable glass partition using Toughened/ Laminated glass in proprietary natural anodised aluminium sections of size 100mm x 30mm with Concealed sealing (No visible Gasekts/Seals) with acoustic rating of upto 38 dB with third party test certificate.The profile will have Carpert Groove at the Bottom on both sides for accomodating max. 8mm carpets. It should consists of intermediate slim junction profiles for Glass to Glass vertical joints, 90 Degree L Junction and T Junction profiles suitably to be used as per room configuration designs.No VISIBLE Clip Lines to provide clutter free view at both side of section. The Glass to be Offset mounted towards outer edge leading to minimum aluminium frame on one side. Optional Profile Bottom Seal pair for additional accoustic if required. Glass thickness - 10/12mm (TSG)/13.52mm( LSG). All Profiles are min 1.5mm thickness excluding 20 microns of Anodizing, Standards applicable • Structural stability test accordance to BS 5234: Part2:1992 & EN 1991-1-1:2002 • Acoustic test for sound insulation in accordance to DIN EN ISO 10140-2 ASTME-E 90 • ALT profile sections are manufactured and tested in accordance to EN573-3, EN755-2, DIN EN 12020 T2 , non-dimensions manufacturing tolerance deviation DIN ISO 2768-1 class C = coarse • Toughened glass complies accordance to BS 6262 (glass supplier specification from market) • Environmental product declaration (EPD) rating accordance to ISO 14025 & EN 15804 • HPDs - Ref HPD Unique Identifier; 22451 & 22452 - Classification : 09 84 00 Acoustic Room Components ALTERRA 100 SG profile being modular shall have feature of converting existing Single glaze into Double glaze without disturbing Finished areas/ removing existing partition system. Max System Height - 3000mm Manufacturer: Profiles/Frames: dormakaba / BENE / maars Glass : Saint Giobain/Asahi

Supply and Install Approved Glass Door on hinges with door frame with a tested sound reduction property upto Rw 28dB

Supply & Fixing of Single Leaf Aluminium Glazed Door of 10mm Toughened Glass with dormakaba Alexa System-100 frames Stiles all around the door. Aluminium Stile to be formed out of 100x45mm of Alexa STP100 Door Profile frame with clips & seals with dormakaba Flush Hinges (4 Nos) , dormakaba TGDI D type Offset Pull Handle 600mm x25mm, CTC - 600mm, D -25mm, Back to back fixing (1 Pairs), Narrow stile Dead Lock package (1 Set), ITS 915 Concealed Door closer (as per EN 1154) with Hold Open unit (1 No). Necessary seals to be provided all around the door frames. For doors part DP100-SG Door rebate profile to be used.In case of Glass overall panel Alexa OHPDP100-SD/DG Over Panel Door profile to be used. The Profile shall be matt black anodized, the Profile Manufacturer to supply all the necessary clips, seals and fixing accessories for the system. All Profiles to be with 2 mm Gauge thickness Excluding 20 Micron of Anodizing. Approved Manufacturer: Profiles /Frames: dormakaba Glass : Saint Giobain/Asahi

Door size 900mm x 2400mm

Door size 1000mm x 2400mm

Door size 1200mm x 2400mm

SIZE: 1800mm X 2400mm (Double shutter)

Approved Make, DORMA,JEB, Alloy

Metal fire Rated Door with door frame

Providing and fixing fire resistant two hours rated steel door with Double rebate steel frame profile of size 145mm x 55mm with bending radius of 1.2m made up of 1.2mm thick galvanized sheet confirming to IS 277. The frames shall have Provision for 4 nos. anchor bolt fasteners on each vertical jamb; 3 mm thick base plate pre-punched cut outs to receive ironmongery.3 mm thick hinge back plate pre-drilled to receive hinge screw. The frame shall be in three pieces bolted at top jamb to vertical jamb for direct installation at site. All cut outs including hinge plates, strike plates have mortar guard cover. The frame shall be primed with zinc phosphate stoving primer and finished with synthetic enamel paint of approved colour.

Size; - 1000mm x 2400mm ( server room)

TOTAL CIVIL WORKS

SUB HEAD PLUMBING WORKS

Providing and fixing of Wall Mounted C.P brass Sink Mixer single hole / single lever with swinging casted spout of required size including cutting and making good the wall wherever required.Make -CERA Quarter Turn Faucets - F2004501 Mist Sink mixer wall mounted

Providing and fixing of Stainless Steel AISI 304 of sink including providing & fixing C.I./M.S. Brackets (duly painted with 2 coats of paint over a coat of primer) C.P. cast brass bottle trap with extension piece, rubber adaptor, wall flange, union, C.P. brass chainrubber plug, 32mm dia CP waste, waste fittings to connect bowl, PVC waste pipe & making good compete in all respects.

Stainless Steel sink w/o drain board Make : Cera -B4512102 Dakota (Matt)

Providing and fixing of vertical / horizontal storage type hot water heater fixed to wall with anchor bolts & nuts, 20mm CP brass cock and 20mm non return valve complete including making connection with 15 mm dia CP connecting pipe on Inlet and Outlet, suitable length of power cable and 15A plough. Make - AO Smith( Gyser 25 Ltr)

SOIL, WASTE ,VENT PIPES & RAIN WATER PIPES

Providing and fixing soil, waste and vent pipes Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905:For soil, waste & Rain Water pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

For waste pipes

Providing and Fixing SS Grating with frame and SS Screws casted heavy duty 125 mm dia conforming to AISI - 304 including cutting and making good the walls and floors wherever required complete in all respects (Make: CARDIN- SDG 05).

Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipes of diameter :

Providing, fixing to the inlet mouth of rain water pipe C.I. grating of following size including all fitting and accessories including civil work.

INTERNAL WATER SUPPLY

Providing, fixing & testing G.I. Pipes (I.S. 1239, heavy duty class) complete with G.I. Fittings ie tees, elbows, sockets, clamps, with structural steel supports with galvanised MS slotted angle, spacers as required etc including making good the walls etc. all complete as per drawing and the direction of Engineer-in-Charge.

Concealed work including cutting chases and making good the walls etc.

15 mm dia

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Supply, installation, testing & commissioning of thermal insulation tubing for hot water pipes (exposed / chases / burried locations), a elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of following nominal bores and thickness including all required accessories, protection as per manufacturer's recommendations, complete in al respect.

15 mm dia (9 mm thickness)

20 mm dia (9 mm thickness)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

15mm dia

20 mm dia

25 mm dia

32 mm dia

40 mm dia

Providing and fixing float valve (brass) of approved quality, High or low pressure, with plastic floats complete in all respects as per engineer-in-charge :

25 mm dia

TOTAL OF SUB HEAD PLUMBING WORKS

FIRE FIGHTING WORKS

HAND APPLIANCES

Providing, fixing, testing & commissioning ABC (Powder Type) Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and confoming to IS:1349-1993.

Capacity 6 Kg

Providing, fixing, testing & commissioning CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS:15683:2006 including fixing with dash fasteners etc. complete.

Capacity 4.5 Kg

SPRINKLER SYSTEM

Providing, laying, jointing in the existing pipe, testing and commissioning of MS Pipe class 'C' (Heavy Class) conforming to IS:1239/3589 including all accessories such as screwed/welded joints, flanges, tees, reducers, structural steel supports and clamps etc. including lift to all heights, welding, jointing, painting and inserted rubber gaskets, nuts, bolts etc. as required, all fittings are heavy duty forged fittings. Pipes shall be painted with two coats of primer & two coats of post office red synthetic enamel paint over two coats of red oxide zinc chromate primer. Prior to application of primer surface to be cleaned including painting of legends both direction arrow as per approval of Project Manager and shall be fixed in ceiling, walls, columns for all heights with hangers/supports and fasteners all as per drawing including chasing of walls/columns /ceiling etc. and making good the same as required. all as per Project Manager/Consultant requirement.

150 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

40 mm dia

32 mm dia

25 mm dia

Notes :

Pipe upto 50 mm dia shall be threaded joints and above 50 mm shall be welded joints.

For pipe upto 50mm dia standard threaded forged steel fittings and for pipe above 50mm dia and above standard of MS fittings with welded joints shall be used.

Supports are included in this items.

G.I Pipe sleeve of suitable higher size shall be provided wherever in the pipe are crossing the wall/ floors and sealing the sleeves with glass wood in between and sealant compound at either end as per project manager's requirement.

Providing and fixing 15 mm dia. Pendent chromium plated brass Quick response sprinkler head with quartzoid bulb confirming to K-80 and set to operate at 68 deg. C complete.

Providing and fixing captive rosettes for pendent sprinkler with sliding adjustment.

Providing and fixing 15 mm dia. Quick response upright with chromium plated brass sprinkler head with quartzoid bulb confirming to K-80 and set to operate at 68 deg. C complete.

Providing and fixing 15 mm dia. concealed chromium plated brass sprinkler head with quartzoid bulb and set to operate at 68 deg. C ccomplete.

Providing and fixing 15 mm dia. Quick response Sidewall type chromium plated brass sprinkler head with quartzoid bulb confirming to K-80 and set to operate at 68 deg. c along with chromium plated captive rosettes with screw/sliding adjustment.

Providing, fixing, testing and commissioning of 15 mm dia SPRAY NOZZLES (water curtain sprinkler) including all fitting and accessories (installation shall be as per NFPA recommendation) {for Compartmentation}.

Providing and fixing M.S. cabinet fabricated from 2 mm thick MS sheet with full front glass door and locking arrangement with suitable shelves for keeping 25 spare sprinklers and one spanner properly fixed in the shelves and cabinet painted fire red with stove enamelled of approved shade size 900 x 600 x 150 mm.

Providing and fixing electrically operated flow indicating switches including 1.5 mm thick compressed asbestos gasket, nuts and bolts complete. (wiring from switches to panel not included)

UPTO 150 mm dia

Providing and fixing 100 mm dia. standard dial type pressure gauge with screwed inlet with isolation cock suitable for liquid guage to show pressure upto 15 kg/sqcm.

Providing and fixing brass ball valve with stainless steel shaft with teflon seat.

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Providing and fixing cast iron butterfly valves of PN 1.6 rating complete with bolts, nuts, 3 mm thick compressed asbestos gasket, companion flanges as per table "E" complete in all respects.

150 mm dia with lever

100 mm dia

80 mm dia

65 mm dia

Providing and fixing gunmetal single acting air valve with screwed inlet 25 mm dia as per IS 12992 rated for 20 Kg/Sp.cm

Supply, installation, testing & commissioning of Sprinkler Flexible Joint of 25mm diameter, consisting of - Flexible Tube (SS 304), S.S. Slip nut, Isolated Ring & O Ring - for Sprinklers Drop, which shall include necessary supports with a maximum working pressure of 14kgf/cm2 and temperature rating of 225oF. The length of Flexible Sprinklers Pipe shall be :-

TOTAL OF SUB HEAD FIRE FIGHTING

ELECTRICAL WORKS

Wiring for the following light points with 1.5 sq. mm PVC insulated copper conductor FRLS wires of 1100 Volts grade in concealed/exposed PVC conduit in false ceiling / walls / ceiling as called for including providing 5 amp flush type switches, approved White Polycarbonate modular cover plate, 5 sided GI box with earth stud and earthing with 1.5 sq. mm PVC insulated copper conductor earth wire.

One point controlled by one 5 amp switch.

One point controlled by two nos. 5A two way switch.

Same as item No. 1 above but LOOP POINT i.e. wiring of point looped from first point with 1.5 sq. mm PVC insulated copper conductor FRLS wire (controlling switch in item no. 1) and earthing with 1.5 sq. mm PVC insulated copper conductor earth wire.

Wiring for the following light points with 1.5 sq. mm PVC insulated copper conductor FRLS wires of 1100 Volts grade in concealed/exposed 16 SWG MS conduits in false ceiling / walls / ceiling and controlled by 10 amp MCB, complete as required including earthing with 1.5 sq. mm PVC insulated copper conductor FRLS wire and as per specifications. (The cost of MCB has been taken elsewhere in the tender).

One point controlled by 10A MCB.

Same as item No. 3 above but LOOP POINT i.e. wiring of point looped from first point with 1.5 sq. mm PVC insulated copper conductor wire (controlling switch in item no. 3) and earthing with 1.5 sq. mm PVC insulated copper conductor earth wire.

Wiring of exit light sign / emergency light with 1.5 sq. mm PVC insulated copper conductor FRLS wires of 1100 volt grade in concealed /exposed PVC conduit in false ceiling / walls / ceiling complete as required, including earthing with 1.5 sq. mm PVC insulated copper conductor FRLS wire as required and specifications. (These will be fed directly from the Emergency DB in the respective areas)

One point controlled by 6/10 amp MCB.

Same as item no. 5(a) above but loop point i.e. wiring of point looped from first point with 1.5 sq. mm PVC insulated copper conductor FRLS wire including earthing, with 1.5 sq. mm PVC insulated copper conductor wire.

Supplying and fixing of 1 no. 5 amp 3-pin outlet with round pin including providing 1 no. 5 amp switch housed in 5 sided GI box is not applicable if the above switch & socket mounted on modular furniture with approved White Polycarbonate modular cover for outlet boxes.

Supplying and fixing of 2 nos. 5 amp 3-pin outlet with round pin including providing 1 no. 5 amp switch housed in 5 sided GI box is not applicable if the above switch & socket mounted on modular furniture with approved White Polycarbonate modular cover for outlet boxes.

Supplying and fixing of 3 nos. 5 amp 3-pin outlet with round pin including providing 1 no. 5 amp switch housed in 5 sided GI box is not applicable if the above switch & socket mounted on modular furniture with approved White Polycarbonate modular cover for outlet boxes.

Supplying and fixing of 1 nos.2Amp USB CHARGER housed in 5 sided GI box is not applicable if the above switch & socket mounted on modular furniture with approved White Polycarbonate modular cover for outlet boxes.

Note : The word UPS shall be engraved on all UPS sockets. The word Raw shall be engraved on all Raw sockets. The UPS & RAW SWITCH,SOCKETshall be of different in color.

Supply and laying of 2 x 1 Sq. mm PVC insulated FRLS copper conductor wires complete as required in 5 sided GI conduit including cost of conduit. (For interconnecting light fixtures as per manufacturer's requirements).

Supplying and drawing of the following size of PVC insulated PVC sheathed copper conductor FRLS wires of 1100 V grade in existing conduits/ Raceway.

3 core x 1.5 Sq. mm copper wire.

3 core x 2.5 Sq. mm copper wire.

Providing and fixing in position of the following sizes of PVC conduit (flushed) including all accessories as required.

32 mm dia PVC conduit

25 mm dia PVC conduit

20 mm dia PVC flexible conduit

25 mm dia GI flexible conduit

Wiring for 5 amp light socket outlet with 1.5 sq. mm PVC insulated copper conductor FRLS wires in concealed/exposed PVC conduits including providing 5 amp switch and 5 pin socket, 5 sided GI box for housing switches sockets, approved White Polycarbonate modular cover and earthing with 1.5 sq. mm PVC insulated copper conductor wire.(Looped to lighting circuit as shown in drawing)

Wiring for 5/15 amp power outlet points with 6 sq. mm PVC insulated copper conductor FRLS wires for the first socket outlet and 4 sq. mm PVC insulated copper conductor FRLS wires for the second outlet of 1100 Volts grade in concealed / exposed PVC conduits as called for including providing 15 amp flush type 6 pin socket and switch, 5 sided GI outlet boxes. Approved White Polycarbonate modular cover plate and earthing, with 2.5 sq. mm PVC insulated copper conductor FRLS wire. (The rate quoted shall be for set of two outlets wired as explained above)

Wiring for 5/15 amp power outlet point with 4 sq. mm PVC insulated copper conductor FRLS wire of 1100 Volts grade in concealed/exposed PVC conduits including providing 15 amp flush type combined 6 pin sockets and switch, 5 sided GI, approved White Polycarbonate modular cover plate and earthing with 2.5 sq. mm PVC insulated copper conductor wire. (Only one outlet shall be connected to each circuit).

Wiring for 15 amp power outlet point with 2.5 sq. mm PVC insulated copper conductor FRLS wire of 650/1100 Volts grade in concealed/exposed PVC conduits including providing 15 amp flush type combined 6 pin sockets and switch, 5 sided GI boxes, approved UPVC modular cover plate and earthing with 1.5 sq. mm PVC insulated copper conductor wire. (Only two outlet shall be connected to each circuit).

Supplying and fixing of 20 amp 3-pin (phase, neutral and earth) for 1-phase industrial socket outlet including supplying PVC conduit with outlet boxes of suitable size, 16 amp DP ELCB (100 mA sensitivity) cum MCB, and a plug top, complete as required and as per specifications. The above socket shall be mounted on angle frame i.e. 50 mm above from actual floor level.

Supplying and fixing in position of the following sizes of flushed PVC conduit including all accessories complete as required and as per specifications.

25 mm dia PVC conduit.

32 mm dia PVC conduit.

Supply and laying EGA Access outlets (under floor) Davis CP 470 - 250/3/1 250 x 250 x 70 mm 1 Trap, 3 compartments 1 trap including providing space for 4 nos RJ-45 Data/ Voice outlet and 4 nos. 6 amp 5 pin socket and 2 nos. 6 amp switch complete as required. Make Legrand, MK , Schneider or equivalent

Supply unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of 600 SQ feet Maser Ultrasonic pest repellent(verna suraksha DX or equivalent make.

Hub room above false ceiling

Hub room below false ceiling

Hub room below false floor

CONDUITING FOR TELEPHONE, COMPUTER, T.V AND COMPUTER NETWORK SYSTEM

Providing and fixing in position 72 mm x 90 mm x 50 mm MS telephone and computer outlet boxes complete as required.

Providing and fixing in position 72 mm x 125 mm x 50 mm MS telephone and computer outlet boxes complete as required.

Providing and fixing in position 72 mm x 225 mm x 50 mm MS telephone and computer outlet boxes complete as required.

Note :- The jack along with cover plate shall be supplied & fixed by the contractor

Providing and fixing in position following sizes of PVC conduits including providing all accessories concealed/ exposed as required along with G.I. pull wire.

20 mm dia PVC conduit (for Data / Voice Wiring)

25 mm dia PVC conduit (for Data / Voice Wiring)

32 mm dia PVC conduit (for Data / Voice Wiring)

Providing and fixing in position following sizes of GI flexible conduit with end couplers including providing all accessories concealed/ exposed as required.

20 mm dia PVC flexible conduit (for Data / Voice Wiring)

25 mm dia PVC flexible conduit (for Data / Voice Wiring)

32 mm dia PVC flexible conduit (for Data / Voice Wiring)

Providing and fixing in position MS anodised TV outlet box 16 gauge with white poly carbonate modular cover plate including supplying, fixing of co-axial type T.V. socket outlet complete as required.

Supply and laying of RG -11 CCTV cable in existing conduit complete as required. (Finolex / Skytone/ RR-Kabel, Havells,D-Link or equivalent)

Supply and fixing of Cat 6 cable for CCTV (D Link or or equivalent make.)

RACEWAYS CABLE TRAYS AND G.I. PIPES

NOTE;- 1) Junction box as indicated in the drawing will be installed at their shown position. However, In every 8 meter there should be junction in long length raceway/cable tray even if not indicated in the drawing.

2) Cable tray support should be in every 1.5 Rmt

200 mm wide X 40 mm deep X 1.6mm thick X 3mm thick cover raceway

150 mm wide X 40 mm deep X 1.6mm thick X 3mm thick cover raceway

100 mm wide X 40 mm deep X 1.6mm thick X 3mm thick cover raceway

65 mm wide X 40 mm deep X 1.6mm thick X 3mm thick cover raceway

Perforated Type Cable Tray

Supply of the following sizes of perforated galvanised Raceway (80 micron thickness) tray . Make Essar , Tata ,Jindalor equivalent

450 mm wide 50 mm high 14 gauge perforated cable tray.

300 mm wide 50mm high 14 gauge perforated cable tray.

150 mm wide 50mm high 14 gauge perforated cable tray.

EARTHING

Supply and Installing earthing stations at locations as called for with 600 x 600 x 3 mm. thick Copper electrode 25 mm. dia medium class GI pipe (Indian Tube Company make or approved equal), GI funnel with 20 gauge GI wire mesh masonry chamber with concrete base, CI manhole cover with frame (300 mm. x 300 mm.) and bitumastic paint and packing the mixture of Charcoal and salt around plate electrod complete as per IS: 3043) for computer network.

Same as item no. 1 but with 600 x 600 x 6.3 mm GI plate.

Supply and fixing in position the following Copper tape/wires including providing all fixing accessories and effecting proper connections.

6 sq. mm PVC insulated copper conductor wire for earthing.

2.5 sq. mm PVC insulated copper conductor wire for earthing.

1.5 sq. mm PVC insulated copper conductor wire for earthing.

4 mm. dia copper wire in 15 mm dia GI pipe

25 x 5 mm copper tape as additional length

Supply and installation of earth stations at locations as called for with OBO BETTERMANN COPPER earthing eletrode Type 143000 of 3000 mm length, 14.2 mm outer dia complete with accessories as per IS : 3043-1987 requirement complete as required.

Rubber mat 914.4 mm. wide and 6 mm. thick to withstand 1.1 KV dielectric strength. Make Sintex or equivalent make

Supplying, Receiving, unloading, storing laying, effecting proper connections, testing and commissioning of following sizes of 1.1 KV XLPE insulated Copper conductor cables overhead cable trays or over MS supports in masonry trenches including providing the MS supports and clamps for fixing to supports in an approved manner complete as required and as per specifications.NOTE CABLE QUANTITY MAY CHANGE AS IT DEPENDS ON CABLE ROUGHT AND EARTH PIT LOCATION.

16 sq. mm copper cable (unarmoured) for earthing.

16 sq. mm copper cable (flexible) for earthing.

Supply and making terminal joints for the following sizes of 1.1 KV XLPE insulated Copper conductor cable including providing terminal lugs, crimping the joints effecting terminal connections to the equipment complete as required including providing single compression glands.

16 sq. mm copper cable (unarmoured) termination for earthing

16 sq. mm copper cable (flexible) termination for earthing

Supply & installation of Earth Box with glass door comprising of 2 Nos. 50 x 6 mm Cu. Earth strip mounted on insulator both Cu. Strip shall be shorted together with same earth strip. Earth box shall have required number of 32mm or 25mm slot for cable entry at upper and lower side. Make Legrand, MK,Hager , Schneider or equivalent.

SUPPLY AND INSTALLATION OF DISTRIBUTION BOARDS

Supplying, fixing in position, testing and commissioning of the following 18 guage/1.2mm sheet metal enclosed wall mounted/fully recessed in wall, indoor industrial type, with dust proof, hinged and lockable doors, complete with interconnections with copper wires, tapes, cable glands, bonding to earth and painting.( DB should be powder coated) The DB shall be suitable for taking cable/conduit as incoming/outgoing. All MCB's shall be "C" curve only. Make Legrand, Hager, L&T,Havells

Sheet metal enclosed 14 way TPN DB with 36 Nos of 10/20 amps SP MCB's i.e. 12 Nos of 10/20 amp SP MCB's arranged in 3 rows and controlled by 1 No. 63 amp TPN MCB and neutral link. (Also provide 3 nos. 40 amp DP RCBO of 30 mA Sensitivity)

Sheet metal enclosed 12 way TPN DB with 30 Nos of 10/20 amps SP MCB's i.e. 10 Nos of 10/20 amp SP MCB's arranged in 3 rows and controlled by 1 No. 63 amp TPN MCB and neutral link. (Also provide 3 nos. 40 amp DP ELCB of 30mA Sensitivity)

Sheet metal enclosed 10 way TPN DB with 24 Nos of 10/20 amps SP MCB's i.e. 8 Nos of 10/20 amp SP MCB's arranged in 3 rows and controlled by 1 No. 63 amp TPN MCB and neutral link. (Also provide 3 nos 40 amp DP ELCB of 30 mA Sensitivity)

Sheet metal enclosed 8 way TPN DB with 18 Nos of 10/20 amps SP MCB's i.e. 6 Nos of 10/20 amp SP MCB's arranged in 3 rows and controlled by 1 No. 63 amp TPN MCB and neutral link. (Also provide 3 nos 40 amp DP ELCB of 30 mA Sensitivity)

Sheet metal enclosed 6 way TPN DB with 12 Nos of 10/20 amps SP MCB's i.e. 4 Nos of 10/20 amp SP MCB's arranged in 3 rows and controlled by 1 No. 63 amp TPN MCB and neutral link. (Also provide 3 Nos. 40 Amp DP ELCB of 100 mA Sensitivity)

Sheet metal enclosed 16 way SPN DB with 12 Nos. of 10/20 amp SP MCB & controlled by 1 No. 32 amp DP RCBO (MCB cum ELCB) of 30 mA sensitivity.

Supply & fixing of following MCB’s in the existing DB and Panel or sheet steel enclosure.

6 Amps SP MCB to 32 Amps SP MCB.

40 Amps SP MCB to 63 Amps SP MCB.

6 Amps DP MCB to 32 Amps DP MCB

40 Amps DP MCB to 63 Amps DP MCB.

6 Amps TP MCB to 32 Amps TP MCB.

40 Amps TP MCB to 63 Amps TP MCB.

6 Amps 4P MCB to 32 Amps 4P MCB.

40 Amps 4P MCB to 63 Amps 4P MCB.

63 Amps 4 Pole ELCB.

40 Amps 4 Pole ELCB.

Sheet Steel enclosure for mounting the following :

SP MCB LEGRAND/MERLIN GERIN/ Hager or equivalent

DP MCB LEGRAND/MERLIN GERIN / Hager or equivalent

TP MCB / / 4P ELCB LEGRAND/MERLIN GERIN/ Hager or equivalent

SP MCB WITH IP66 PROTECTION Make Legrand, Hager or equivalent

DP MCB WITH IP66 PROTATION Make Legrand, Hager or equivalent

TP MCB / / 4P ELCB WITH IP66 PROTATION Make Legrand, Hager or equivalent

CABLES, MAINS AND SUB-MAINS AND CONDUITS

The rates shall include the following:

It shall be the responsibility of electrical contractor for getting the approval from electrical consultant of cable schedule before placing the order to the cable vendor.

2 mm thick MS boxes with dust proof, vermin proof covers and lockable arrangements, mounted flush with surface of wall.

Earthing all components, frame etc.

Effecting, adequate and proper connections.

Painting/lettering on distribution boards and providing its circuit diagram.

Painting of all metal parts with approved enamel paint.

Effecting, adequate and proper connections at terminations.

Providing thimble, solder etc. at joints and terminations as called for.

All fixing accessories such as brass saddles, brass screws rawl plugs etc.

Jointing by rivieting and soldering.

Cutting chases, holes and making good the same wherever required.

Use of Brass/G.I. thimbles

The current density of the bus bar to be used shall be 1.0 sq. mm. per amp.

Ferruling, cable tagging, circuit labeling in all wires and cables. Cable tagging should be in every 7 Rmt.

Identification tags indicating the size of the cable and fedeer designation shall be securely attached on both ends of the cable such tags shall also be attached to the cable at interval of 250 m. The materials ogf the tag shall be either 12 SWG GI sheet or plastic. In case of plastic, details have to be ingraved and incase of GI sheet details should be punched.

Supplying, Receiving, unloading, storing laying, effecting proper connections, testing and commissioning of following sizes of 1.1 KV XLPE insulated Copper conductor armoured cables overhead cable trays or over MS supports in masonry trenches including providing the MS supports and clamps for fixing to supports in an approved manner complete as required and as per specifications.

4 x 16 sq. mm. cable

4 x 10 sq. mm. cable

2 x 10 sq. mm. cable

2 x 6 sq. mm. cable

3 x 6 sq. mm. cable

Supply and making terminal joints for the following sizes of 1.1 KV XLPE insulated Copper conductor cable including providing terminal lugs, crimping the joints effecting terminal connections to the equipment complete as required single compression gland.

4 x 16 sq. mm. cable termination

4 x 10 sq. mm. cable termination

2 x 10 sq. mm. cable termination

2 x 6 sq. mm. cable termination

3 x 6 sq. mm. cable termination

Supplying, Receiving, unloading, storing laying, effecting proper connections, testing and commissioning of following sizes of 1.1 KV XLPE insulated Aluminium conductor armoured cables overhead cable trays or over MS supports in masonry trenches including providing the MS supports and clamps for fixing to supports in an approved manner complete as required and as per specifications.

3.5 x 150 sq. mm. cable ( on surface)

Supply and making terminal joints for the following sizes of 1.1 KV XLPE insulated Aluminium conductor cable including providing terminal lugs, crimping the joints effecting terminal connections to the equipment complete as required single compression gland.

3.5 x 150 sq. mm. cable termination

SUPPLY OF PANEL

The rates shall include the following:

2 mm thick MS boxes with dust proof, vermin proof covers and lockable arrangements, mounted flush with surface of wall.

Earthing all components, frame etc.

Effecting, adequate and proper connections.

Painting/lettering on distribution boards and providing its circuit diagram.

Painting of all metal parts with approved enamel paint.

Effecting, adequate and proper connections at terminations.

Providing thimble, solder etc. at joints and terminations as called for.

All fixing accessories such as brass saddles, brass screws rawl plugs etc.

Jointing by rivieting and soldering.

Use of Brass/G.I. thimbles

PANELS

Design, manufacture, testing at works & supply of 2 mm thick MS sheet steel fabricated cubicle type Panel dust and vermin proof complete with hinged and lockable doors. All the panels shall be floor mounted and dead front construction complete with interconnections by copper tapes/ wires and painting. The Panels shall be provided with one no. of multifunction meter of EM6400 of Conzerv make or equivalent along with associated C.T.'s in the incoming feeder. The current density of the bus bar to be used in panel shall be 1.0 sq. mm / amp for Cu. Bus Bar for aluminium bus bar 1.3 sq. mm / amp.

Panel manufactrurer should be CPRI Bhopal approved ( not older than 5 years ) Make Power Associates, Kalyani, Adlec,Tricolit, UPS International

One set of phase indicating lamps with (MCB) in incoming feeder only.

Each outgoing feeder shall be provided with one no. ON indication lamp.

RAW FLOOR PANEL -1 described as below

Incoming

1 No. 200 amp FP MCCB of 35 KA service breaking capacity. (Trip setting from 0.8 to 1),with ON indicating lamp.MCB

1 set DUAL ENERGY Multifunction meter with CT & RYB indicator and MCB in incomer.

Bus Bar

1 No. 250 amp 4P 55 KA Aluminium Bus bar of suitable length. Bus bar sizing shall be based on current density of 1.3 sq. mm / amp.

Outgoing

2 No. 100 amp FP MCCB of 25 KA service breaking capacity. (Trip setting from 0.8 to 1) with ON indicating lamp.MCB with stud type terminal on outgoing side.

3 No. 63 amp FP MCCB of 25 KA service breaking capacity. (Trip setting from 0.8 to 1) with ON indicating lamp.MCB with stud type terminal on outgoing side.

3 Nos. 63 Amps Four Pole MCB of 10 KA service breaking capacity, with ON indicating lamp.MCB with stud type terminal on outgoing side.

2 Nos. 32 Amps Four Pole MCB of 10 KA service breaking capacity, with ON indicating lamp.MCB with stud type terminal on outgoing side.

4 Nos. 25 Amps Four Pole MCB of 10 KA service breaking capacity, with ON indicating lamp.MCB with stud type terminal on outgoing side.

11 Nos. 20 Amps DP MCB of 10 KA service breaking capacity, with ON indicating lamp.

SUPPLY AND INSTALLATION OF EXIT SIGNS FOR FIRE

Supply, Installation, testing and commissioning of Exit signs with self contained in built Ni-Mh-Cd batteries of - V - Ah approved by Engineer-In-Charge Cat. No. PROLITE PEL LED E/M (S) LED 2hrs Backup or equivalent make.

SCHEDULE OF QUANTITIES FOR FIRE DETECTION & ALARM SYSTEM

Supply & Receiving , unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of CONVENTIONAL smoke detector , optical type LED, etc. complete as required and as per specifications. Make :-GST Model/P.Code DC-9102E+DB-01 or equivalent make.

Supply & Receiving , unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of CONVENTIONAL heat detector for above false celing complete as required and as per specifications.Make :-GST Model/P.Code DC-9103E+DB-01 or equivalent make.

Supply & Receiving , unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of manual pull station to initiate audio alarm, resettable CONVENTIONAL type complete as required.and as per specifications Make :-GST Model/P.Code DC-9204E or equivalent make.

Supply & Receiving ,unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of Fire Alarm Hooter ( sound output of minimum 90 dB upto a distance of 30 meters) with strobe light of 110 cd intensity with addressable module to make it addressable with power supply arrangement complete as required and suitable for wall/ceiling mounting.and as per specifications. Make GST Model/P.Code C-9403 or equivalent make.

Supply & Receiving ,unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of 3 out card complete as required for switching ON of smoke extraction fans / Pressurisation Fans etc. and switching off AHU' s complete as required.and as per specifications. Make : GST Model/P.Code RB-116A or equivalent make.

Supply & Receiving ,unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of 3 zone CONVENTIONALfire panel and analog output complete in all respects. The panel shall have a built in power supply and battery charger along with maintenance free 12 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 8 hours with battery charger complete as required.and as per specifications. Make GSTModel/P.Code116 A or equivalent make.

Supply & Installation of Response Indicator complete as required. and as per specifications. (Agni) or equivalent make.

Supply & Installation of 24V/ 6 Amp. Power supply for hooter/ module power complete as required. and as per specifications.Make APC, Luminious,Eaton or equivalent make.

Public Address System

SUPPLY OF PUBLIC ADDRESS SYSTEM P A system to be intergraded with fire panel , in case fire the prerecorded massage to conveyed all zones through LBB 1990

Supply of following make Music Accessories / Equipments.

Supply Installation, testing & commissioning of 120 W (rms) dual channel professional grade amplifier with prority facility and chaine module PLE1ME120IN+Mixture make BOSCH or equivalent make.

Supply Installation, testing & commissioning of 6 W low level ceiling speaker (flush mounting type) LBD 0606 make BOSCH or equivalent make.

Supply & Installation of complete loud speaker wall mounted type LB1 -U W 06 6 watts cabinet ( Black color) Complete as required or equivalent make.

Supply Installation, testing & commissioning of gooseneck cardiod microphone LBB 9082 with desk stand. or equivalent make.

CONDUITING AND WIRING FOR PA AND FIRE ALARM SYSTEM (cable)

Supply & laying of 2 core 2.5 sq.mm stranded copper conductor, PVC insulated FRLS armoured cable [ISI Marked].

Supply & laying of 24/0.2 two core twin twisted speaker cable.

Supply & laying of 25 mm dia PVC conduit

Supply & laying of 20 mm dia PVC conduit

Supply & laying of 32 mm dia PVC conduit

Supply & laying of 20 mm dia PVC flexible conduit

SUPPLY OF LIGHT FIXTURE

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture 2 x 2 , 4000 K, 36 Watts . Surface Finish White Colour,600x600 mm. Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture.Strapline 50 suspended, 1200mm individual, 4000K, 30watts,Surface Finish Black Colour. Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 2000mm individual, 4000K, 40watts,Surface Finish Black Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 2400mm individual, 4000K, 40watts,Surface Finish Black Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 3000mm individual, 4000K, 40watts,Surface Finish Black Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Pearl Recessed Downlight, 4000K, 15watts,Surface Finish White Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Zeta (420mm dia), 3000K, 15watts,Surface Finish Orange Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture D- Lite(600mm dia), 3000K, 15watts,Surface Finish Blue Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 1200mm,continous,In formation of L- shape with 1- L connector, 4000K, 30watts,Surface Finish Black Colour. . Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 1200mm,continous,In formation of square with 4- L connector, 4000K, 30watts,Surface Finish Black Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 1200mm,continous,In formation of hexo with6-v connector, 4000K, 20watts,Surface Finish Black Colour.Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 1200mm & 1800mm ,continous,In formation of rectangle with 4- L connector, 4000K, 30watts,Surface Finish Black Colour. .Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

Supply and Receiving transporting site including insurance as required unloading, storing, inspection, handling, assembling, installing in correct assigned position, effecting proper connections, testing and commissioning of LED Fixture Strapline 50 suspended, 3000mm & 1800mm ,continous,In formation of rectangle with 4- L connector, 4000K, 60 watt & 30watts,Surface Finish Black Colour. Make Crompton, Wipro,Jaquar, Bajaj or equivalent make

FIXING OF LIGHTING FIXTURES

Receiving, fixing in position, effecting proper connections, testing and commissioning of 1 x 36 watt LED fixtures/2 x 36 watt LED fixtures fixed surface mounted on ceiling or wall mounted with all fixing accessories as required.

Receiving, fixing in position, effecting proper connections, testing and commissioning of 1 x 28 / 2 x 28 watt LED fixtures recessed in ceiling with chains hung from slab with all fixing accessories as required.

Receiving, fixing in position, effecting proper connections, testing and commissioning of PL lamp fixed recessed in ceiling including providing and fixing of required G.I. sheet on which fixture shall be clamped complete as required and with all accessories.

Receiving, fixing in position effecting proper connections testing and commissioning of PL lamp fixed surface mounted on ceiling or wall mounted complete as required with all accessories.

Receiving, fixing in position effecting proper connections testing and commissioning of COVE light fixed surface mounted on ceiling or wall mounted complete as required with all accessories.

IT NETWORKING BOQ CABLE,I/O USER END,EQUIPMENT END & FACE PLATE

Horizontal Connectivity Components ( Supply and Erection )

4-pair, Cat6 (600 MHZ tested with Cross (+) filler pair seperator & FRPVC sheath, CMR rated) 23 AWG, UTP Cable (305 mt. Roll), Meets or exceeds ANSI/ TIA-568-C.2 Make D-Link. Digilink or equivalent make.

Cat 6 UTP Jack with Strain relief and bend limiting boot, Exceed TIA/ EIA-568-C.2 and ISO/ IEC 11801 standards for Category 6/ Class E component performance, Red - Data (Both End) Make D-Link. Digilink or equivalent make.

Cat 6 UTP Jack with Strain relief and bend limiting boot, Exceed TIA/ EIA-568-C.2 and ISO/ IEC 11801 standards for Category 6/ Class E component performance, Green - Redundant Data (Both End) Make D-Link. Digilink or equivalent make.

Cat 6 UTP Jack with Strain relief and bend limiting boot, Exceed TIA/ EIA-568-C.2 and ISO/ IEC 11801 standards for Category 6/ Class E component performance, Blue - IP Voice (Both End) Make D-Link. Digilink or equivalent make.

Four Port face plate of size 3x3, Material should be ABS/ UL94 V-0 with shutter of ABS UL94V-0 having spring shutter of steel, stainless. Holder, Jack of ABS UL 94V-0, Cover label of Acrylic UL94V-0 with GI/ Cromated Box Make D-Link. Digilink or equivalent make.

Cat 6, 24-port unloaded, Angled Jack Panel, SL-Series with labels and clear label covers, Height, 1U

Cat 6 Equipment Cord, 4-Pair stranded Unshielded conductors, FRPVC sheath, Transparent plug and boot design provide additional space between adjacent plugs, Non-plenum (CM rated)-7 ft, Color Red - Data (Both End)Make D-Link. Digilink or equivalent make.

Cat 6 Equipment Cord, 4-Pair stranded Unshielded conductors, FRPVC sheath, Transparent plug and boot design provide additional space between adjacent plugs, Non-plenum (CM rated)- 7 ft, Color Green - Redundant Data (Both End - Considered 50%)

Cat 6 Equipment Cord, 4-Pair stranded Unshielded conductors, FRPVC sheath, Transparent plug and boot design provide additional space between adjacent plugs, Non-plenum (CM rated)- 7 ft, Color Blue - IP Voice (Both End) Make D-Link. Digilink or equivalent make.

BOM - SERVICE

Service BOQ for UTP Intelligent & Nonintelligent Cabling

Laying of Cat6 UTP Cable via existing Raceway, tray conduit, cleaning of raceways, channel including proper dressing of cat6 cable

Installation of Data, Redundant, VOIP, Backbone inclusive of fixing of data, redundant, VOIP, Backbone port, ferruling numbering labelling of UTP Cable, Punching on both end (IO/ UTP Jack Panel Side) and installation of jack panel & Face Plate.

Penta Scan report of UTP cable including testing and documentation

S/E OF 1 NO 15 KVA UPS 3 phase in and 3 phase out with minimum 1 hour backup with batteries, stand, etc etc Make Numeric, Eaton, APC,Luminious,Uniline etc

TOTAL OF SUB HEAD ELECTRICAL WORKS

HVAC WORKS SECTION A

EQUIPMENT

OUTDOOR UNITS

Supply, Installation, Testing and Commissioning of air cooled variable refrigerant flow modular type condensing units, each comprising of multiple/double scroll compressors all inverter driven, full charge of refrigerant gas (R-410a), lubricating oil and all accessories as per the specifications. The condensing units shall be suitable to work on cooling as well as heating mode. The minimum Energy Efficiency Ratio shall be as per ASHRAE STANDARDS 90.1 -2001 table 6.2.1B The condensing units shall be suitable for operation on 415 ± 10% volts, 50Hz, 3 phase AC power supply and the condensing units shall be of following capacities: Make Diakin,Toshibha,Mitsbuishi or equivalent make.

a. 40 HP nominal capacity

b. 8 HP nominal capacity (TFA)

NOTE: The above mentioned outdoor units shall be provided with anti corrosion treatment (preferably from factory). The quoted price shall be inclusive of same.

INDOOR UNITS

Supply, Installation,Testing and Commissioning of variable refrigerant flow modular type indoor units suitable for R410a refrigerant comprising of all accessories as per the specifications. The indoor units shall be suitable to work on cooling as well as heating mode.The minimum Energy Efficiency Ratio shall be as per ASHRAE STANDARDS 90.1 -2001 table 6.2.1B. The indoor units shall be suitable for operation on 220 ±6% volts, 50Hz, 1 phase AC power supply. Ductable indoor units shall be suitable to handle extent of ductwork as shown in the design drawings and dehumidified air quantity as mentioned in the heat load summary sheet under "Special Conditions". The indoor unit shall be complete with pre filter as per requirement The indoor units shall be of following capacities.

Hi -Wall Type Indoor Units with cordless remote

i. 1.6 TR nominal capacity

ii. 2.0 TR nominal capacity

Round Flow CASSETTE UNITS with inbuilt pump

2 TR Nominal Capacity

2.6 TR Nominal Capacity

3.2 TR Nominal Capacity

Compact CASSETTE UNITS with inbuilt pump

1 TR Nominal Capacity

1.3 TR Nominal Capacity

Treated Fresh air unit

988 CFM (6.3 TR) TFA

Supply, Fabrication and Installation of MS frame using channels/angle iron sections as required for mounting of air cooled remote condensers and air cooled condensing units for VRF outdoor units. The frame work shall be applied with red oxide primer and thereafter, two coats of enamel paint of approved colour. The general arrangement drawing for frame work shall be got approved from the Architects/Structural Engineers prior to commencement of fabrication.

CENTRALISED CONTROLLER

Supply, Installation, Testing & Commissioning of BMS compatible main centralised controller (touch screen type) as per specifications to hook up indoor/ outdoor units as mentioned above, including customized AHUs. The controller shall however be suitable for catering to all the indoor/ outdoor units and customized AHUs for the complete including area. Funtions of the centralized controller in brief shall include but not be limited to remote start/stop of units, temperature setpoint control, status monitoring etc.

TOTAL OF (EQUIPMENT)

PIPING

COPPER PIPING

Supply, Installation, Testing & Commissioning of high pressure copper refrigerant piping suitable for R 410a refrigerant of suitable size as required and duly insulated with 19mm/13mm thick closed cell elastomeric insulation in tubing form inclusive of glass cloth and UV treatment. External Refrigerant piping shall be laid on GI covered cable trays. Piping inside occupied spaces shall be supported using GI ladder type cable trays. Entire refrigerant piping work be carried out in accordance with the specifications. Piping shall be of following sizes: Make Totaline,Mandiv, Rajco or equivalent

Pipe Size Min. Wall Insulation

Size (O.D.) Thickness Thickness

41.3 mm 1.43 mm 19 mm

34.9 mm 1.21 mm 19 mm

28.6 mm 1.00 mm 19 mm

22.9 mm 1.00 mm 13 mm

19.1 mm 1.00 mm 13 mm

15.9 mm 1.00 mm 13 mm

12.7 mm 0.80 mm 13 mm

9.5 mm 0.80 mm 13 mm

6.4 mm 0.80 mm 13 mm

FITTINGS

Supply, Installation , Testing and Commissioning of following imported fittings to be provided in refrigerant pipe line. Material of construction for fittings shall be similar to refrigerant piping.

Y- joints for refrigerant piping (pair).

Copper Headers suitable to connect multiple indoor units.

Providing and fixing in position the following GI medium class pipes for condensate drain cut to required lengths & installed with all screwed joints and providing and fixing position the necessary elbows, tees & reducers. Pipes shall be insulated with 9 mm thick closed cell elastomeric insulation in tubing form for mentioned condensate drain piping as per the specifications.

a. 50mm dia

b. 40mm dia

c. 32mm dia

d. 25mm dia

CONDENSATE DRAIN PUMP

Supply Installation, Testing and Commissioning of condensate drain pump with insulated sump having adequate provision for connections. It shall be provided with necessary controllers complete with control wiring in all respect as required and as per the specifications. The pumps shall be of following sizes:

a. Hi-flow 1L

b. Hi-flow 2L

TOTAL OF (PIPING)

ELECTRICAL INSTALLATION

POWER CABLING

Supply, laying, affecting connections & Testing of the following sizes of 1.1 KV armoured XLPE insulated aluminium/ copper conductor cables. Cables shall be inclusive conductor cables. Cables shall be inclusive of all clamps, saddles, screws, cable identification tags, insulating tapes, affecting terminal connections to the equipment as per the specifications and as required.

a. 4C x 25 Sqmm cable (Aluminum)

b. 4C x 16 Sqmm cable (Copper)

c. 4C x 10 Sqmm cable (Copper)

b. 4C x 6 Sqmm cable (Copper)

c. 4C x 2.5 Sqmm cable (Copper)

d. 3C x 1.5 Sqmm cable (Copper)

CONTROL WIRING

Supply, laying, affecting connections and Testing of the following sizes of control cum transmission wiring to be laid in conduits between indoor units and outdoor units.

2C x1.5 Sqmm copper wiring

EARTHING

Providing & fixing in position the following bare GI tape/ Cu wire including providing all fixing accessories & effecting proper connections.

a. 8 SWG Cu Wire in 20mm dia GI pipe

HVAC-LOW SIDE WORKS SECTION-B

EQUIPMENT

INLINE FANS

Supply, Installation, Testing and Commissioning of circular/rectangular inline fans for exhaust air as shown on drawings, complete with sheet metal casing, direct driven centrifugal fan, motor with proper protection and inspection door,gravity louvers etc. as per the specifications. Fan should be suitable for operation on 415+10% volts, 50 Hz, three phase or 220±10 %, 50 Hz, single phase AC power supply as required. Single Phase inline fans shall be provided with speed regulators.

Fan shall be suitable for installation or as shown on drawings and shall be of following capacities:

Fan Capacity SP Electrical Type

No. (Cfm) (mmWG) Characteristics

IF- 400 12 220V/1 Ph Circular

SPLIT PACKAGES

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Supply, Installation, Testing and Commissioning of split type airconditioning units, each comprising of an outdoor and a single indoor unit. Condensing unit shall be complete with hermatically sealed rotary/ scroll compressor/s/ inverter compressor, with aluminium fins, thermostatic expansion valve and air cooled condenser with fan. Evaporating unit shall consist of a fan section with dynamically balanced centrifugal fan/s driven by FHP/TEFC squirrel cage induction motor, multirows deep cooling coil of copper tubes and aluminium fins construction etc. Enclosures shall be fabricated as specified. The evaporating unit shall be equipped with synthetic fibre filters, insulated drain pan, safety controls, thermostat all complete in a unit. The outdoor unit enclosure shall be factory painted to a smooth finish. The quoted price shall be inclusive of full refrigerant charge, vibration isolation pads, associated electrical work and MS base frame duly painted with black enamel paint for mounting of condensing units on floor/ wall. Ductable three phase units shall be complete with phase reversal kit and motor protection device. The units minimum efficiency shall be 13 SEER. The units shall have Minimum 3 STAR RATING, and shall be R-32/ R-407c/ R-410a refrigerant based.

Three phase non-ductable split units:

a. 3 TR nominal capacity split unit with single high wall type non-ductable indoor unit with cordless control.

Single/ Three phase non-ductable split units:

a. 2.0 TR nominal capacity split unit with single high wall type non-ductable indoor unit with cordless control. Make Diakin,Toshibha,Mitsbuishi or equivalent make.

b. 1.5 TR nominal capacity split unit with single high wall type non-ductable indoor unit with cordless control. Make Diakin,Toshibha,Mitsbuishi or equivalent make.

Supply, Installation, Testing & Commissioning of copper refrigerant piping complete with closed cell elastomeric insulation material with Class "O" fire rating in tubing form and Electrical work including power wiring associated with the above split packages as required.

a. Pair of hard refrigerant piping duly insulated.

b. Pair of soft refrigerant piping duly insulated.

Supply, Installation, Testing and Commissioning of PLC for Auto Sequencing of Split units with micrprocessor based controller along with enclosure/ accessories having facility for configuration of the same as per requirement for sequenced Start/Stop for split units as follows:

Supply, Installation, Testing and Commissioning of PLC for Auto Sequencing of Split units with micrprocessor based controller along with enclosure/ accessories having facility for configuration of the same as per requirement for sequenced Start/Stop for split units as follows:

Supply, Installation, Testing and Commissioning of PLC for Auto Sequencing of Split units with micrprocessor based controller along with enclosure/ accessories having facility for configuration of the same as per requirement for sequenced Start/Stop for split units as follows:

a. For Two number split packages including one standby.

AIR DISTRIBUTION

Ductwork

Factory Fabricated Ductwork

Supply of factory fabricated dutwork, Installation and Testing of galvanised sheet metal ducts including elbows, turning vanes, fire retardant gaskets, slip on flanges, GI fully threaded rods, GI supports/hangers etc. in accordance with the approved shop drawings and specifications. The ducts shall be fabricated and installed in line with SMACNA standards. Make Essal, TATA or equivalent.

a. 1mm-500mm (26 gauge) GSS

b. 501mm-1050mm (26 gauge) GSS

c. 1051mm-1500mm (24 gauge) GSS

d. 1501mm-1800mm (22 gauge) GSS

e. 1801mm-2100mm (20 gauge) GSS

Conventional site fabricated ducts using Lock Forming Machines.

Supply, Fabrication, Installation and Testing of sheet metal ducts in accordance with the approved shop drawings and specifications. Ducts shall be fabricated using lock forming machine. Make Essal, TATA or equivalent.

a. 0.63mm (24 gauge) GSS

b. 0.8 mm (22 gauge) GSS

c. 1.0mm (20 gauge) GSS

d. 1.25mm (18 gauge) GSS

Supply, Fabrication, Installation & Testing of BARE elliptical sheet metal ducts in accordance with the approved shop drawings and specifications. Make Essal, TATA or equivalent.

a. 1.0mm (20 gauge) GSS

Supply, Installation & Testing of 125mm deep Antivibration Flexible Joints made out of imported fire retardant fabric with extruded aluminium frame/ flange on both sides of approved make.

Supply, Installation and Testing of multi blade type key operated louver dampers of galvanised steel sheet for collars to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per the approved shop drawings and specifications.

Supply, Installation & Testing of multiblade box type galvanised steel sheet dampers for ducts to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per the approved shop drawings and specifications.

Supply, Installation, Testing & Balancing of powder coated square diffusers as per the specifications.

600x600 size diffusers with insulated plenum & spiggot with necessary clamping arrangement for termination of supply air flexible duct. The quoted price shall be inclusive with removable key operated volume control damper & 9 mm thick closed cell elastomeric insulation

600x600 size diffusers without insulated plenum & spiggot for return air.

300 dia. diffusers with insulated plenum & spiggot with necessary clamping arrangement for termination of supply air flexible duct. The quoted price shall be inclusive with removable key operated volume control damper & 9 mm thick closed cell elastomeric insulation

300 dia. diffusers without insulated plenum & spiggot for return air.

Supply, Installation, Testing & Balancing of one way blow linear supply cum return air grilles complete with removable inner core as per approved shop drawing and specifications.

The grilles shall be powder coated, extruded aluminum sections type, with integral flanges on both sides & ends. The grilles shall be rectangular/ square in shape.

The grilles shall be of approved colour & shade.

Supply, Installation , Testing and Balancing of multi-slot type linear slot diffusers as per the approved shop drawings and specifications.

a. Powder coated extruded aluminium diffusers of approved colour & shade.

i. 2/3/4 slot diffusers having width of slots as 25mm/35mm.

Supply, Installation, Testing and Commissioning of pre-insulated factory fabricated flexible ducts inner as well as outer skin constructed out of aluminium sheet. Ducts shall be of following sizes:

a. 250mm dia

b. 200mm dia

c. 150mm dia

d. 100mm dia

Supply, Installation & Testing of extruded aluminium powder coated air transfer grilles to be provided at toilets & kitchen doors.

Supply, Installation and Testing of fresh air grilles of powder coated/ anodised extruded aluminium with filters, inlet louvers, dampers and bird screen, as per approved shop drawings and specifications.

Supply of spigots of different sizes to facilitate flexible duct connection.

b. 250mm dia

c. 200mm dia

d. 150mm dia

e. 100mm dia

Supply, Installation and Testing of non-return dampers as per specifications and design drawings.

TOTAL OF (AIR DISTRIBUTION)

INSULATION

Supply & Application of acoustic lining of ducts/plenums, using open cell elastomeric insulation with adhesive as per the specifications and drawings.

a. 15 mm thick

b. 10 mm thick

Supply and Application of external thermal insulation of ducting using closed cell elastomeric insulation with adhesive, longitudinal & transverse joints sealed with adhesive as per specifications.

a. 16 mm thick

b. 9 mm thick

Supply and application of 32 kg/m^3 density and 50 mm thick fibre glass wool with aluminium on one side and IC Clad(Black Fiber Glass Cloth) on other side for roof exposed to sun. It shall be with adhesive, longitudinal & transverse joints sealed with adhesive as per specifications.

a. 50 mm thick

TOTAL (INSULATION) SECTION -B

TOTAL OF SECTION B (HAVC)

TOTAL OF SECTION A+B (HAVC)

SUB HEAD AV SYSTEM

GROUP PRESENTATION AREA - (2 nos.)

Displays 75"

MAKE SAMSUNG/PANSONIC/LG/SONY MODEL:-75QB OR EQUILENT

Wall mount bracket for 75" Display or equivalent

MAKE STANDARD MODEL:- STANDARD or equivalent

Extenders and switching

Active 4k HDMI cables

MAKE Kramer / Milestone MODEL:- Standard or equivalent

Automatic Switcher

MAKE Kramer / Milestone/Equilent MODEL:- Kramer 4x1 / Equivalent

Misc infrastructure

USB Cable

Active USB HUB

MAKE Kramer / Milestone/Equilent MODEL:- Custom

Labour

Installation (general labour)

MEETING ROOM

Displays 43"

MAKE SUMSANG/PANSONIC/LG/SONY MODEL:-QB/LH

Wall mount bracket for 43" Display

MAKE STANDARD MODEL:- STANDARD or equivalent

Conferencing and misc

USB Camera MAKE Lumens MODEL VC-B11U

Camera wall bracket MAKE STANDARD MODEL:- STANDARD

Conferencing HUB

Mini PC MAKE WINDOW/IOS MODEL HP/Lennvo Moddel Windows/IOS or equivalent

Extenders and switching

Active 4k HDMI cables MAKE Kreamer MODEL Standard or equivalent

Cable Cubby MAKE Logic / Standard MODEL Standard or equivalent

Labour

Installation (general labour)

Meeting Room - 6 pax AND 4 PAX (5 nos.)

Displays 43"

MAKE SUMSANG/PANSONIC/LG/SONY MODEL:-QB/LH

Wall mount bracket for 43" Display

MAKE STANDARD MODEL:- STANDARD or equivalent

Extenders and switching

Active 4k HDMI cables MAKE Kreamer MODEL Standard or equivalent

Cable Cubby MAKE Logic / Standard MODEL LC404 or equivalent

Wireless presentation system (optional)

Labour

Installation (general labour)

Large Community space

Video

Projector Make PANSONIC/Epson or equivalent

Ceiling mount bracket MAKE logic/Equilent MODEL logic/ Equilent or equivalent

Proejctror Screen MAKE logic/Equilent MODEL 109 / Equivalent or equivalent

Extenders and switching

Active 4k HDMI cables MAKE Kreamer MODEL Standard or equivalent

Av faceplate MAKE logic MODEL:- Custom or equivalent

Audio

Handheld microphone MAKE sennhieser MODEL:- XSW1or equivalent

Lapel microphone MAKE sennhieser MODEL:- XSW2 or equivalent

Amplifier MAKE BiAmp MODEL:- Revamp4120 or equivalent

wall mount speaker MAKE BiAmp MODEL:- Apart MASK6CT-B or equivalent

Misc infrastructure

speaker cable MAKE Kramer MODEL:- Custom or equivalent

audio cable MAKE Kramer MODEL:- Custom or equivalent

AV Rack(12 RU) MAKE Custom MODEL:-Custom or equivalent

Labour

Installation (general labour)

Reception and work area

Displays 55"

MAKE SUMSANG/PANSONIC MODEL:-QB/LH

Wall mount bracket for 43" Display

MS PARKASH CHAND GOYAL

INTERMARC