GE (N) P/TOKEN- 73 OF 2022-2023 SPL REPAIRS TO ROOF TREATMENT , FALSE CEILING , MANGLORE ROOF TILING , TOILETS AND MISC B/R , E/M ITEMNS IN BLDG NO T-P-12 AND P-13 IN ZRO AND MW WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.

- Ditto- all as per serial item No. 01 here-in-before but except tiles.

M&L for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc incl dismantling of tile and rubbish off the premises complete all as specified and as directed.

S&F for 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete incl dismantling of scantling and rubbish off the premises all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).

- Ditto- all as per serial item No. 04 here-in-before but except batten.

M & L for Preparing surfaces of slate batten of any size and spacing and treated all over (measured overall on one side only spaces not deducted ) with creosote complete all as specified and as directed.

M&L for 2nd class hard wood, clean sawn, in scantling timber work incl dismantling of scantling and rubbish off the premises all as specified and as directed.

- Ditto- all as per serial item No. 07 here-in-before but except timber.

M & L AC Fibre board12 mm thick as in eaves board fixed with butt joint etc complete as approved of any size and shape including taking down existing boarding complete all as specified and as directed.

Dismantling asbestos cement / steel (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with two corrugation side lap etc complete all as specified and as directed.

M&L for 12mm thick mineral fibre false ceiling including GI powder coated grid work of size 605mm x 605mm with using 32.0 mm x 23.5mm x 1.5 mm thick main tee, 26.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways complete including taking down existing false ceiling with grid etc all as specified and as directed. Make :- Armstrong, gyproc, New Age.

M & L for Mild steel, corrugated steel sheets 0.63 mm thick as in roof work and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with two side corrugation laps joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position etc. complete all as directed.

Dismantling timber scantling in fillets, rails, posts, raffters, purlins etc under 40 Sqcm in section complete all as specified and as directed.

S & F of mild steel work as in tubular Steel work in rafter, purlins, battens etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 as in main cross beams and running rails fixed independently with angle iron cleats or connecting pieces Complete all as specified and directed.

S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.

M & L for Compound post / girders and stanchions, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates confirming to Gde Fe 410 -W (Gde E- 250) quality A , etc. all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement etc all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm girth or width and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed.

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces complete all as specified and as directed.

M&L for applying one coat of alkali resistant priming paint on wall complete all as specified and as directed.

M&L for two coats of oil emulsion distemper of approved tint on wall surfaces complete all as specified and as directed.

M&L for preparation of old treated surfaces of wall and applying one coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to, roof, parapet, wall surface ,floor etc, on heritage buildings complete all as specified and as directed by Engineer-in-charge.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

S&F for 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

S&F for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

M&L for 16 to 18mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding/plaster (but not backing) and removing rubbish off the premises etc complete all as directed.

M&L for double charged coloured vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles etc complete all as specified and directed.

M&L for double charged coloured Vitrified ceremic tiles 10mm thick of approved shade as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles over and etc complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete etc all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 300mm x 450mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) etc complete all as specified & directed.

Taking down shutters from frame of area exc 1.00 Sqm and not exc.1.5 sqm each and removing from to or of stores etc complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.2 sqm each complete all as directed.

M&L for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .

S&F for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004 complete all as specified and as directed.

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) complete all as specified and as directed. Make Rajshree / Sintex or equivalent.

S&F Aluminium door handle 125mm size cast type complete all as specified and as directed.

S&F Aluminium anodized barrel tower bolt of excruded section, 200mm size complete all as specified and as directed.

S&F Aluminium anodized barrel tower bolt of excruded section,150mm size complete all as specified and as directed.

S&F Stainless steel butt hinges medium weight 100mm with all as specified and directed.

S&F floor power door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S&F for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

S&F for aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F in repairs brass chromium plated two way bib cock with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar ‘QUEEN'S series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs brass chromium plated fittings angular stop cock with wall flange 15mm dia Cat No. QQT 7053 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs brass chromium plated pillar cock 15mm dia Cat No. QQT 7011 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs brass chromium plated pillar cock 15mm dia Push type all as specified and as directed. Cat no F-1012451 Make Cera or equivalent

S&F in repairs brass chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs brass chromium plated toilet paper holder ,Cat No. AQN-7751 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated soap dish ,Cat No. AQN-7731 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs brass chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repair brackets for drapery/ curtain rod, decorative type, of stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.

S&F in repair decorative head for drapery/ curtain rod 25 mm dia of stainless steel complete all as specified and as directed.

S&F in repair drapery/ curtain rod of 25mm dia, decorative type, of stainless steel complete all as specified and as directed.

S&F in repairs, brass chromium plated long body bib cock with wall flange 15mm dia Cat No. CON-107 KN of make Jaguar ‘CONTINENTAL' series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

M & L for Filleting in any position and to any shape in n cement mortar 1:4 including all mitres, stops, etc. complete all as specified and as directed.

M & L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 etc all as specified and as directed.

M & L for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 etc all as specified and as directed.

M & L for water proofing treatment to RCC roof slab complete all as specified below and as directed:- (a) Complete removal of existing waterproof treatment / membrane including screed bed / plaster and removing the material where directed to a distance not less than 500 m and cleaning the roof surface with water. (b) Providing 10 mm thick plaster on roof surface in CM(1:4) with using WPC as per manufacturers instructions. (c) Cleaning the plastered surface and applying Oil based bituminous primer @ 0.25 Ltrs /Sqm. (d) APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application method all as specified and directed. (f) Applying two coats of bituminous aluminium paint on APP membrane surface. Note No :- (i) Overlaps (end and longitudinal) shall be as under:- (a) End Lap 100 mm. (b) Longitudinal 75 mm. (ii) : Waterproofing Compound shall be measured and paid seperately under relevant items.

Supply only integral water proofing compound.

M&L for disconnecting existing water tanks setting aside (for lowering if required ) for repairs , cleaning etc and hoisting if required reconnecting and re-fixing in position capacity of watertank exc 500 but n exc 1000 litres complete all as specified and as directed.

M&L for disconnecting existing water tanks setting aside (for lowering if required ) for repairs , cleaning etc and hoisting if required reconnecting and re-fixing in position capacity of watertank exc 250 but n exc 500 litres complete all as specified and as directed.

Material and labour for removing of plants, bushes, weeds with roots from walls, roofs, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines, waste water pipe, bends or as directed and filling the disturbed area with cement concrete (1:1.5:3) or cment motar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per existing surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to the height of 15 metres vertical or steep slopes)

S& F 1000 ltrs capacity of PVC Rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 25mm size brass float valve, high pressure PTMT, with polythene float and flynut and connected fittings including Dismantling existing water tanks and etc complete all as specified and directed.

S& F 500 ltrs capacity of PVC Rotational moulded polyethylene water storage tanks ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 25mm size brass float valve, high pressure PTMT, with polythene float and flynut and connected fittings including dismantling existing water tank complete all as specified and directed.

S & F in repairs with wall UPVC SCH-40 Gde 150 mm bore rain water pipe as in down take with necessary fitting to fix with wall and to connect with strome water drain etc all as specified as directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil complete all as specified and as directed.

Removing excavated soil exc. 1.50 km but n exc. 5 km and depositing where directed

M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/ Dense soil all as specified and as directed

M & L earth filling in floors etc., spreading and leveling in layers not exceeding 25cm thick, well ramming including watering as required complete all as specified and directed.

M&L for hardcore of broken stone of gauge n. exc 63 mm deposited, spread and levelled in layers n exc 150 mm thick, watered and rolled / rammed to a true surface complete all as specified and as directed.

M&L 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm garded broken stone aggregate) in foundation complete all as specified and as directed.

M&L for damp proof course in PCC 1:2:4 type B0, 40mm thick in Horizontal and vertical surfaces including for incorporating Integral Waterproofing compound as Specified by Manufacturer's including necessary formwork complete all as specified and as directed. (Waterproofing compound measured and paid separtely)

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L Machine pressed rubber moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS- 15658-2006 of 60 mm thick, M-35 grade in floor/ pavment laid over and including 30 mm thick Crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. Note- (i) Manufacturer test certificate shall be submitted along with Sample.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on surfaces of walls complete all as directed by Engineer-in-Charge.

S&F factory made 100% solid wood polymer composite (WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum complete all as specified and directed. NOTE: During fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. Make: Rajshri/ Sintex/Duraplast/Accucell

S&F factory made 100% solid wood plastic composite (WPC) 28 to 30 mm thick board in door shutter complete all as specified and directed. Make: Rajshri/ Sintex/Duraplast/Accucell

S&F 100 mm long butt hinges, heavy weight, cold rolled mild steel, and fixed, conforming to the sample kept in the office of the GE (N) Pune

S&F 150mm long extruded aluminium alloy handles, fabricated type , anodised conforming to the sample kept in the office of the GE (N) complete all as specfied and as directed.

M&L for 150 mm bore pipe for Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in cement concrete, type D-2, 1:4:8 complete all as specified and as directed.

M&L 150mm dia reinforced cement concrete pipe Class NP2 laid and jointed complete with collars and laid in trenches complete all specified.

S&F for 50 mm thick , 900x650 mm , heavy duty factory made precast RCC cover slab with frame, RCC in 1:2:4 type B1 using 20 mm graded stone aggregate including reinforcement with mild steel TMT bars 6mm dia @ 150 mm c/c both wasys and set in cement mortar 1:4, finished the surface even and fair complete all as specified and as directed.

M&L for cutting into existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel in CM 1:2:4 Type B1 smooth finished reforming benching as required. Internal dia of pipe 150mm complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors 75mm dia complete all as specified and as directed.

'- Ditto- all per item No 109 above but 110mm dia complete all as specified and as directed.

S&F Stack Clamps out of (50mmx5mm) flat iron and 12mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for pipe 100mm bore complete all as specified and as directed.

M&L 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal bends with oval acess door complete all as specified and as directed.

M&L 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.

M&L for PVC (SWR) bends any radius of 75mm dia with oval and access door complete all as specified and as directed.

- Ditto - all as per item No 114 as above but 110mm dia complete all as specified and as directed.

M&LPVC (SWR) branch piece single Y equal or unequal of 75mm dia with access door complete all as specified and as directed.

S&F cast iron Nahani trap with grating of diameter of outlet 100 mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).complete all as specified and as directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

M&L(SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed.

S&F 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 15mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F Rotational moulded polythylene water storage tank (sylindrical, vertical with closed top) hosted and fixed capacity of tank 1000 lts sintex make complete all as specified and as directed.

S& F Ball brass valve 20 mm dia high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F vitreous china, squatting pan of 'Orissa' pattern, long pan, size 580 mm x 440 mm, white, with 'P' of 'S' Trap, front or back inlet and foot rests any pattern, including concrete bedding including 32mm PVC flush pipe, all internal fitting, inlet, outlet pipe connections etc. complete all as specified and as directed.

S&F PVC low level flushing cistern 10 ltr capacity with brackets of approval Make and all necessary fittings etc complete all as directed and specified.

S&F vitreous chinaware wash hand basin, using pedestal size 550x400 mm including 15 mm dia pillar tap chromium plated, CP waste coupling, chain and plug, waste fittings, union and waste pipe 32 mm dia of required length and all necessary inlet outlet connections complete . Make - Hindware

S&F PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm at the ends complete.

S&F Towel rail 600 mm long of PTMT fixed with and including Chroimuim plated brass screws and wooden / plastic cleats (Minimum weight 190 gms) complete all as specified and as directed.

S&F 15 mm bore dia CP fancy type Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and as directed.

S&F 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Taking down old steel window with frames with shutters not exc 1.5 Sqm each (w/o taking off shutters from the frames) and removing from site complete all as specified and as directed.

Dismantling of stone masonry in cement mortar and in any position complete all as specified and as directed.

M&L for stone walling of random rubble, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

All as per Srl item No. 136 above but except stones complete all as specified and as directed.

M&L for external angles (for quoins and jambs ) in facings for walling of random rubble or polygonal rubble, uncoursed or brought upto courses and squared rubble masonry, regular coursed, secundrabad and bangalore types complete all as specified and as directed.

M&L for extra over stone walling for hammer dressing to face stone and dressing of face beds and joints for trap stone of 20mm as specified of random rubble walling uncoursed or brought upto courses complete all specified and as directed.

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing in CM(1:6) complete all as directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

M&L for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with modular white cover plate & frame after chasing in brick / stone masonry walls etc for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following

One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point controlled by one, one way switch 6 Amps and regulator Note : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoated.

One 3 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 3 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

- Ditto- all as per 142 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed

M&L for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with Plastic surface boxes of suitable module, earth dolly, covered with modular white cover plate & frame for modular switches , including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following all as specified and as directed for the following

One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point controlled by one, one way switch 6 Amps and regulator

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

One 3 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 3 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

- Ditto- all as per 141 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 5 pin socket outlet plug point,6/16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following all as specified and as directed

S&F Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.

S&F Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.

S&F Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.

S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.

S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.

S&FDouble USB Charger 2 M 2400 mA complete all as specified and as directed. Make Legrand cat No 5734 22 or Equivalent in Havells Cat No AHLKGXW002

S&F, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.

S&F modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.

S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed

S&F 25 Amps Motor starter Make Havells cat No- AHCSMXB251 complete all as specified and as directed

S&F 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ

S&F Smart Glow intelligent office lighting recessed LED luminaire 600 mm x 600 mm, 36 Watt with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied, high efficiency PMMA diffuser soft glare free light, complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make Philips Type RC383B LED 36S-6500 PSU OD WH PIR

S & F Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed

Supply only Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/ CFL direct fit lamp, in B-22 cap complete all as specified and as directed

S&F LED 9 W focus light, Surface mounted, powder coated, die cast aluminium and anodized aluminium reector with clear diffuser, fully adjustable complete with all accessories prewired all as specified and directed. Make- Syska Cat No- SSK-TRS-9W or equivalent IN Philips, orient, Jaquar

S&F LED street light fitting 36 Watt or above 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Make Jaquar Cat No LPCRSRT 36WXC or equivalent inHalonix , Bajaj. Note :- (i) GI medium grade pipe bracket of 1.5 Mtr length, size of pipe suitable to mouth of street light fitting along with nuts, botts washers and MS flat iron clamps of size as ordered shall deemed to be included in the unit rate quotated. (ii) Rate quated shall be inclusive of provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting

Taking down fan, seal cable end, dismantling blades and removing fan and blades to store from site and fixing or Hanging in existing position after proper cleaning , replacing unserviceable fan condenser 2.5 MFD and connecting up including provision of cable from ceiling rose or connector to fan after room plaster, colour complete all as specified and as directed.

S&F Energy Efficient BLDC Motor, wall mounted fan , Power-32 W consumption on high speed, Input voltage 90-245 V-AC single phase, Speed: 1350 RPM ,50 Hz , 400 mm sweep, 3 blade, and making connections complete all as specified & as directed. Make : Bajaj/Havells/crompton

S&F ceiling fans (5 Star rated) High speed working on single phase input voltage 140-285 , Sweep- 1200 mm, 350 RPM (±10%) , complete with compact BLDC Motor, blades, down rods, without remote canopy and all accessories including making connections with provision of flexible wire 23 /0.0076 three core copper conductor black/ white from ceiling rose/connector to fan complete all as specified & as directed. Make- Havells (Enticer), Orient (Aeroquiet) , Bajaj (Energos),

S&F exhaust fan, AC single Phase, working on input voltage 140-230 , of size 200 mm sweep, 1100 RPM, Power 37 W with Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Usha Crisp Air VX, Bajaj, Havells,crompton

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.

S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed

S & F Vertical TPN distribution board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for Each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.

Four pole MCCB, Thermal Release Range 63-80 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).

Supply and fix electric water heater, storage type shock proof with Glass line inner tank (rust proof) and heating element upto 2 KW capacity 25 litre, temperature display, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, 16 Amps shock safe safety plug connected with 3 core cable of suitable size / length, including 04 Nos of hold fastener nuts of required suitable size fixed in brick / stone wall complete all as specified and as directed. Note- Minimum 07 Years warranty on Inner tank and 04 Years on heating element shall be provided by manufacturer from date of purchase. Firm should obtain warranty/ gurantee from the manufacturer & submit the same to the department. Make- Bajaj Model Calenta , Havells Model- Monza Digi (GHWAMJSWH025) or equivalent in Venus, Usha

Supply and fix exhaust fan, AC single Phase, working on input voltage 140-230 , of size 250 mm sweep, 1100 RPM, Power 37 W with Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed . Make- Atomberg (EFFICIO), Usha, Bajaj, Havells, Indo Asian

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s Akshay Contruction

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD

Galaxy Construction

Sai Construction

SAGAR ENTERPRISES