REPAIR/ MAINT OF EXT ELECTRIFICATION SYSTEM AND LT OH/UG DISTRIBUTION SYSTEM INCLUDING LIGHTING PROTECTION SYSTEM AND REPAIRS/MAINT OF LT PANELS, APFC PANELS AND CONNECTED WORK AT CITY AREA ALWAR

Amount

Repair of street light fitting fixed on pole without taking down the fitting from the pole of any type, capacity & make by replacement of spare parts & making the fitting functional complete all as specified & directed.

Disconnecting and taking down the street light fitting from the pole and repair of street light fitting of any type, capacity & make by replacement of spare parts & making the fitting functional and refixing the fitting after repairs complete all as specified & directed.

Disconnecting and taking down the light fitting from the High Mast Tower and repair of fitting of any type, capacity and make by replacement of spare parts & making the fitting functional and refixing the fitting after repair complete all as specified & directed. (Note for Sr. Item No. 1,2 & 3 ) :(i) Spare parts shall be paid separately under supply only under item No 4 to 4.02

Supply only of following spare parts, which are required for street light any type and to be fixed under above appropriate items :- Supply only surge protection device (SPD) with potted driver for LED street light fitting 60/90W & taking out old U/S SPD & driver 60/90W. Make : Philips/CG/Bajaj/Havells

Supply only LED Chip for street light fitting 60/90 W any make & taking out old LED chip.

Supply only LED Driver suitable for LED street light 20 w any make & taking out old driver .

Supply and fixing 2.5 sqmm PVC insulated & sheathed cable twin core copper conductor cable from street light fittings to junction box & taking out old U/S copper cable

Supply and fixing 2.5 sqmm PVC insulated & sheathed cable twin core aluminium conductor cable from over head conductor to street light fittings & taking out old U/S Aluminium Cable.

S&F street light bracket made to shape at required angle made out of 40 mm dia ( light grade ) GI tubing of length not less than 1.5m long suitable for fixing /holding street light fittings including mild steel flat iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as directed by Engr-in-Charge & taking out old U/S bracket.

Supply and fixng in repair SMC street pole mounted juction box in PVC of Make Sintex made out of one piece totally enclosed,weather proof,frount openable ,water proof, having aluminium bus bars 100 Amp single phase and neutral with one No MCB SPN 6 Amp for street light, cable entry from bottom, maintenance free size 300x200x100 mm fixing on pole with MS flat 25x3mm clamp including nut bolts front openable all as specified and directed by Engineer-in-Charge.

S&F 12W Garden light /Gate light Aluminium housing ,clear acrylic diffuser, cast alumonium pole cap complete with accessories, suitable for OD of dia 60mm pipe including taking down old unserviceable garden/gate light all as specified and directed.

Excavation in trenches n. exc. 1.5 Mtr width n.exc 1.5 Mtr in depth for laying of cables & foundation of poles, stay assembly and getting cut in any type of soil.

Returning, filling in including spreading levelling , watering and well ramming in layers not exc. 25cm in any type soil

Removing of surplus excavated soil to a distance not exc. 50m and depositing where directed at a level not exc 1.5 Mtr above the starting point.

M/L for brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M/L for sand cushioning for laying to PVC UG cable with approved quality of sand complete all as specified and directed.

M/L for GI pipe (Light grade) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of size 40 mm bore including taking out old U/S pipe

M/L for GI pipe ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of size 50 mm bore including taking out old U/S pipe

M/L for GI pipe ( Light grade ) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of size 80 mm bore including taking out old U/S pipe

Supply and Laying in trenches or passing through pipe/fixed to pole/ wall XLPE insulated armoured heavy duty electric cable with alluminium conductor of 10 sqmm x 2 core size including taking out old U/S cable. Note : Excavation & earth work will be measured and paid separately under the respective items.

All as per srl item No 18.00 but for 16 sqmm x 2 core

All as per srl item No 18.00 but for 25 sqmm x 3.5 core

All as per srl item No 18.00 but for 35 sqmm x 3.5 core

All as per srl item No 18.00 but for 50 sqmm x 3.5 core

All as per srl item No 18.00 but for 95 sqmm x 3.5 core

All as per srl item No 18.00 but for 120 sqmm x 3.5 core

All as per srl item No 18.00 but for 185 sqmm x 3.5 core

Electronic contactor 3 pole suitable for 32 Amps 415 Volts AC & taking out old U/S contactor 32 A Make L&T, Siemens/C&S

Electronic contactor 3 pole suitable for 70 Amps 415 Volts AC& taking out old U/S contactor 70A .Make L&T, Siemens/C&S

Digital Timer switch 110-240 VAC, 50/60HZ tolerance -20% to +10% contact 16 A(NO) & 5A (NC) @ 240 VAC/24 VDC model digital crono times setting by date and position coordinates . Cat No. 67DDTO & taking out old U/S Timer switch any type complete all as specified and directed.

Supply and fixing MCCB, 4 Pole, 415 Volts -50HZ , Magnetic fix type of 25 to 63 Amps,16 KA capacity including dismantling of unservieable MCCBs.

All as per srl item No 29.00 but for 100 Amps, 16 KA

Supply and fixing Globe shaped light for Existing garden light in frosted finish made up of Polycarbonate suitable for LED 9/10 watt all as specified and directed & taking out old U/S Globe.

S&F gate light of Globe shaped post top lantern in frosted finish made out of polycarbonate including suitable for upto 27w retrofit LED including taking down of old U/S globe complete all as specified and directed.

Supply & fixing LED 9 watt for garden light & including taking down old U/S CFL/LED complete all as specified and directed. Make-CG /Philips/Bajaj/ Havells

S&F in replacement steel tubular swaged pole 09 meter long type 410 SP-31 with & including two coats of synthetic enamel paint in alternate black and yellow strips 30 cm each upto 1.20 metre height from top of PCC coping/pedestal and applying two coats of aluminium paint over a coat of aluminium red oxide primer to remaining portion of pole and marking pole number and including dismantling and taking down old unserviceable pre-stressed concrete pole 09 metre long all as specified & as directed. Note : Excavation & earthwork, PCC in foundation & coping shall be measured and paid for separately.

Supply, installation, commissioning and testing of JETA PRO PLUS type LED based flood light of 120 watt rating energy saving IP-65 flood light luminaire with high power COB LED as light source complete with all fittings and pre wired and as directed & specified & taking out old U/S Flood light . Make: Havells model JETA PRO PLUS Cat part no. JETAPROPLUSFL120WLED757LTG or equivalent from CG/BAJAJ/WIPRO/PHILIPS

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate in mass concrete for pole foundation all as directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B2 using 20 mm graded stone aggregate in coping concrete for pole foundation all as directed by Engineer-in-Charge.

M&L painting of steel tublar pole for steel surfaces/ cross arms/ clamps etc with two coat of aluminium paint including cleaning of exisiting surface with wire brush all as directed

M&L painting of existing PCC pole steel surfaces/ cross arms/ clamps etc with two coat of aluminium paint including cleaning of exisiting surface with wire brush all as directed

M&L for painting of existing PCC poles upto 150cm , 30cm with two coat of colour code paint yellow and black as per colour code of LT pole and marking of pole No.all as directed

S & F Garden light BAMBOO Type fitting LED 9 W including LED lamp and necessary PCC work/FI nuts, bolts for mounting the fitting complete all as directed by Engineer-in-Charge including taking down U/S light any type any size complete all as specified and directed. Make : Havells Cat No. LHEVBDP71N6K008 or equivalent of Phillips, CG, Bajaj, Shakti.

S&F MCCB ,4 pole ,400 Amps. Rating rupturing capacity 36 KA ,415 Volts grade AC,50Hz ,with adjustable thermal ,magnetic release and making connections ,including disconnecting and taking down old U/S MCCB, complete all as specified and directed.

S&F MCCB ,4 pole ,250 Amps. Rating rupturing capacity 36 KA ,415 Volts grade AC,50Hz ,with adjustable thermal ,magnetic release and making connections ,including disconnecting and taking down old U/S MCCB, complete all as specified and directed.

S&F MCCB ,4 pole ,160 Amps. Rating rupturing capacity 36 KA ,415 Volts grade AC,50Hz ,with adjustable thermal ,magnetic release and making connections ,including disconnecting and taking down old U/S MCCB, complete all as specified and directed.

M&L for earthing to electric equipments / panels etc with and including galvanized MS earth plate electrode of size 600x600x6.30mm thick burried vertically in ground to a depth not less than 2.25 metre below ground level, with top edge of earth plate not less than 1.5m below ground level as shown in electrical plate No 3 of SSR Part I, the earth plate surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all sides, excavation & earth work in any type of soil and removal of surplus soil upto 50m including galvanized mild steel strip 32mm x 6mm as earth lead, welding at top of electrode and other end of strip connected to equipment body/panel/test point with two Nos nuts bolts or welding with steel structure,GI earth strip encased in and including 40mm bore GI light grade pipe with all fittings from upper edges of earth plate upto 3.00 metre above ground level fixed along equipment body/panel with and including 25x3mm FI clamps, bolts, nuts and washers, PCC chamber (1:3:6) type C1, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering, 75 mm thick RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing.

Surface dressing not exc 15 cm deep in soft/loose soil and site clearance with cutting of plants/busheshes fill up pits and tranches with soil, levelling of surface, through extra wastage material out of fencing area and clean the pump house area well in standard, all as specified and as directed by Engr-in-Charge.

S&F stay assembly complete with accessories as shown on electrical plate No 1 of SSR Part-I with 16 mm dia 1.80 mm long stay rod, 300mm x 300mm x 6mm thick stay plate, complete all as specified including taking out old unserviceable stay assembly complete.

Cutting/trimming of tree branches around the LT/HT overhead line 3 metre clearance alround from the external conductors & removal the same from site and depositing at places within the Cantt area as directed. Note : Length of span shall be 30 to 40 metre approximate.

Restraining/tightening of existing LT over head ACSR conductor of any size upto permissible sag in between existing span including GI earth wire, clamps, cradles etc. including new 2mm dia aluminium binding wire complete all as specified. Note :- The length of each conductor shall be measured & paid for. The rate quoted shall be for one conductor.

M&L for repair to APFC panel of any size and capacity by replacement of U/S internal wiring with new PVC insulated stranded copper conductor FRLS cable of existing sizes but not less than 6 sqmm including replacement of U/S fixtures /items/accessories such as capacitor, contactor, MCB, MCCB, bus bar ,CTs relay, voltmeter ,amp.meter indicating lamp etc. and setting of relay to achive power factor 0.99 and including taking down of U/S parts complete all as specified and directed.

S& F in repair APFC microprocessor based intelligent relay suitable for manual /automatic operation with 6 relay out put and one alaram relay ,supply voltage 230 volts and inter phase menu driven display of various parameters (capacitor banks status, voltage, current, KVA, KVAr, KW, frequency, power factor tempture & target PF etc) and storage of various values and test run options and accessories for grid current measuring module(for current measurement of inherent current of capacitor bank and remote indicator complete model No.BR6000-R6 of EPCOS or model No-8 of L&T and equivalent of CG, Havell's, Siemens including taking out old U/S relay.

Contactor 3 pole, 63 Amps, 415 Volts including taking out old U/S contactor.

Contactor 3 pole, 40 Amps, 415 Volts including taking out old U/S contactor.

Contactor 3 pole, 25 Amps, 415 Volts including taking out old U/S contactor.

Contactor 3 pole, 18 Amps, 415 Volts including taking out old U/S contactor.

Power factor correction Capacitor of 2 KVAR,three phase, gas filled round type 415 Volts,50 Hz,heavy duty Make-L&T,EPCOS,SIEMENS/HAVELLS including taking out old U/S capacitor

Power factor correction Capacitor of 3 KVAR,three phase, gas filled round type 415 Volts,50 Hz,heavy duty Make-L&T,EPCOS,SIEMENS/HAVELLS including taking out old U/S capacitor

Power factor correction Capacitor of 5 KVAR,three phase, gas filled round type 415 Volts,50 Hz,heavy duty Make-L&T,EPCOS,SIEMENS/HAVELLS including taking out old U/S capacitor

Power factor correction Capacitor of 10 KVAR,three phase, gas filled round type 415 Volts,50 Hz,heavy duty Make-L&T,EPCOS,SIEMENS/HAVELLS including taking out old U/S capacitor

CTs Coil Ratio 5/100 coil type for APFC control panal

Supply,installation,commissioning and testing of high intensity type LED based street light of 90 watt rating new generation energy generation and environmental friendly long life versatile pressure die cast aluminium IP-65/66 roadway luminaire with high power LED as light source complete with all fittings,No of lens -02 ,10000 > lumens and prewired and as directed & specified.Make-Syska model No- SSK-SLR-90W or equivalent model Havells/shakti/C&S

Supply,installation,commissioning and testing of high intensity type LED based street light of 25 watt rating new generation energy generation and environmental friendly long life versatile pressure die cast aluminium IP-65/66 roadway luminaire with high power LED as light source complete with all fittings and prewired , 2100 > lumens and as directed & specified.

Supply and fixing 10 sqmm PVC insulated & sheathed cable three core Copper conductor cable from High Mask Junction Box to to High Mask light fittings Make : Polycab/Havells/Finolex

Supply, installation, commisioning and testing of Flood Lights 240W,Energy saving,eniveronmental friendly,long life,exclusive innovative die-cast aluminium non integral IP 66 flood light,suitable for high mast application,highlighting architectural facade and general purpose lighting including external control gear box of Make : Havells Model No JETAVALOURFLS240WLED757MODSYMLTG and equilavant Make Philips/C&S/Crompton Greaves and all as specified and directed by Engineer-in-Charge

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earthbut using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including necessary earth work, PCC 1:3:6 type C1 chamber, RCC cover slab of 50 mm thick 1:2:4 with 8 mm CTD 140 mm C/C with suitable handle, watering pipe 20 mm dia light grade pipe with funnel, charcoal, salt and testing on completion all as specified and directed by Engr-in-Charge

M&L Cable jointing kit for 1.1 KV (Earthed) grade cable straight through termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armourend aluminium conductor cable of size 25-50 sqmm. Make : Denson/Raychem. (Note : Necessary excavation and earth work included in quoted rates).

M&L Cable jointing kit for 1.1 KV (Earthed) grade cable straight through termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armourend aluminium conductor cable of size 70-150 sqmm. Make : Denson/Raychem. (Note : Necessary excavation and earth work included in quoted rates).

Fixing only retrived machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15650-2008 of 60mm thickness, M-35 grade with grey cement and no pigment except tiles, including taking down and 25cm thick sand cushioning complete all as specified and directed. (Note:-Sand cushion will be measured and paid separately).

Supply, installing, testing and commissioning factory made, floor mounted outdoor type LT feeder panel board, cubicle type, of size 120cm X 100cm X 50cm suitable for 415 Volts, 3 Phase, 4 wire, 50 Hz, AC supply system, and tested at CPRI, having bus bar chamber with insulated Aluminium bus bar four wire system, colour coded for each phase and neutral, insulated on epoxy type insulators. The bottom of the outer shell contains a detachable plate having provn for entry of cable of adequate size with glands, The panel shall be dust and vermin proof, IP-65 class protection and made 3.2 mm CRCA MS sheet, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, both side opening type, including internal wiring with PVC insulated solid copper conductor cable, IS-694 marked, 1100 volts grade of appropriate size (but not less than 2.5 sqmm) including grouting of panel 45 cm above ground level by providing 90 cm long angle iron frame of size 50x50x6 mm, welded on all the four corners, embedded in pcc 1:2:4 using 20 mm stone aggregate upto 30 cm above ground level complete all as specified and directed including the following accessories :- INCOMING (i) Adjustable thermal magnetic MCCB 4 pole 630 Amps, 36 KA - 01 Nos (ii) Digital Combined Ammeter & Voltmeter (10/0-400/500)A/V rating - 01 Nos (iii) Aluminium bus bar 800 Amps with insulator - 04 Nos (v) Instrument control fuses and indication lamp (RYB). OUTGOING (i) Adjustable thermal magnetic MCCB 3 pole, 500 Amps 36 KA - 01 Nos ( + One space for 01 No MCCB) (ii) Adjustable thermal magnetic MCCB 3 pole, 100 Amps, 25 KA - 03 Nos (iii) Adjustable thermal magnetic MCCB 3 pole, 80 Amps, 25 KA - 01 Nos

All as per item No. 70.00 here in before but of incoming and outgoing capacity are as under INCOMING (i) Adjustable thermal magnetic MCCB 4 pole 250 Amps, 36 KA - 01 Nos (ii) Digital Combined Ammeter & Voltmeter (10/0-400/500) A/V rating - 01 Nos (iii) Aluminium bus bar 400 Amps with insulator - 04 Nos (v) Instrument control fuses and indication lamp (RYB). OUTGOING (i) Adjustable thermal magnetic MCCB 3 pole, 160 Amps, 25 KA - 02 Nos (ii) Adjustable thermal magnetic MCCB 3 pole, 100 Amps, 25 KA - 04 Nos

All as per item No. 70.00 here in before but of incoming and outgoing capacity are as under INCOMING (i) Adjustable thermal magnetic MCCB 4 pole 400 Amps, 36 KA - 01 Nos (ii) Digital Combined Ammeter & Voltmeter (10/0-400/500)A/V rating - 01 Nos (iii) Aluminium bus bar 600 Amps with insulator - 04 Nos (v) Instrument control fuses and indication lamp (RYB). OUTGOING (i) Adjustable thermal magnetic MCCB 3 pole, 250 Amps, 36 KA - 01 Nos (ii) Adjustable thermal magnetic MCCB 3 pole, 160 Amps, 25 KA - 02 Nos (iii) Adjustable thermal magnetic MCCB 3 pole, 100 Amps, 25 KA - 04 Nos

All as per item No. 70.00 here in before but of incoming and outgoing capacity are as under INCOMING (i) Adjustable thermal magnetic MCCB 4 pole 400 Amps, 36 KA - 01 Nos (ii) Digital Combined Ammeter & Voltmeter (10/0-400/500)A/V rating - 01 Nos (iii) Aluminium bus bar 600 Amps with insulator - 04 Nos (v) Instrument control fuses and indication lamp (RYB). OUTGOING (i) Adjustable thermal magnetic MCCB 3 pole, 250 Amps, 36 KA - 01 Nos (ii) Adjustable thermal magnetic MCCB 3 pole, 200 Amps, 36 KA - 01 Nos (iii) Adjustable thermal magnetic MCCB 3 pole, 160 Amps, 25 KA - 02 Nos (iv) Adjustable thermal magnetic MCCB 3 pole, 100 Amps, 25 KA - 01 Nos

All as per item No. 70.00 here in before but of incoming and outgoing capacity are as under INCOMING (i) Adjustable thermal magnetic MCCB 4 pole 400 Amps, 36 KA - 01 Nos (ii) Digital Combined Ammeter & Voltmeter (10/0-400/500)A/V rating - 01 Nos (iii) Aluminium bus bar 600 Amps with insulator - 04 Nos (v) Instrument control fuses and indication lamp (RYB). OUTGOING (i) Adjustable thermal magnetic MCCB 3 pole, 250 Amps, 36 KA - 02 Nos (ii) Adjustable thermal magnetic MCCB 3 pole, 125 Amps, 25 KA - 01 Nos (iii) Adjustable thermal magnetic MCCB 3 pole, 100 Amps, 25 KA - 01 Nos

All as per item No. 70.00 here in before but of incoming and outgoing capacity are as under INCOMING (i) Change over switch 400Amp 4 pole - 01 Nos. (ii) Adjustable thermal magnetic MCCB 4 pole 320 Amps, 36 KA - 01 Nos (iii) Digital Combined Ammeter & Voltmeter (10/0-400/500)A/V rating - 01 Nos (iv) Aluminium bus bar 600 Amps with insulator - 04 Nos (v) Instrument control fuses and indication lamp (RYB). OUTGOING (i) Adjustable thermal magnetic MCCB 3 pole, 160 Amps, 25 KA - 01 Nos (ii) Adjustable thermal magnetic MCCB 3 pole, 125 Amps, 25 KA - 02 Nos (iii) Adjustable thermal magnetic MCCB 3 pole, 100 Amps, 25 KA - 01 Nos

All as per item No. 70.00 here in before but of incoming and outgoing capacity are as under INCOMING (i) Adjustable thermal magnetic MCCB 4 pole 320 Amps, 36 KA - 01 Nos (ii) Digital Combined Ammeter & Voltmeter (10/0-400/500)A/V rating - 01 Nos (iii) Aluminium bus bar 600 Amps with insulator - 04 Nos (iv) Instrument control fuses and indication lamp (RYB). OUTGOING (i) Adjustable thermal magnetic MCCB 3 pole, 250 Amps, 36 KA - 02 Nos (ii) Adjustable thermal magnetic MCCB 3 pole, 125 Amps, 25 KA - 02 Nos (iii) Adjustable thermal magnetic MCCB 3 pole, 100 Amps, 25 KA - 02 Nos

Supply, install, testing and commissioning automatic intelligent power factor corrector (APFC) capacitor bank LT 3 phase, 440 volts, system 50 cycles, AC supply to improve PF 0.80 to 0.90 or unity automatically step wise switch capacitor panel floor mounted ourdoor type weather proof dust/vermin proof type made out of MS sheet 16 SWG and angle iron 40 x 40 x 6 mm frame. Factory made fabricate as modular in construction duly powder coated light grey colour, front openable panel shutter with locking arrangement to faciliate ease of maintenance complete natural air cooled cable entry with gland plate iwth provision of PCC 1:3:6 type C1 450 mm below ground and 300 mm above ground level all around legs complete of cap 100 KVAR and consisting of items are as under : (i) Incom MCCB 4 pole 160 Amps 36 KA - 01 Nos (ii) MCB TP 63 Amps `C' curve - 06 Nos (iii) Contactor 3 pole (25-63)Amps - 06 Nos (iv) Cylinderical type cap 25 KVAR - 03 Nos (v) Cylinderical type cap 10 KVAR - 02 Nos (vi) Cylinderical type cap 5 KVAR - 01 Nos (vii) APFC relay 7 stage - 01 Nos.

Supply & fix in repair recess type, 36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, warm white/ cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge. MAKE- Havels, Philips, Bajaj

Supply Installation Testing and Commissioning in replacement of Lithium based Solar LED Security light System with built in Battery and PV Panel and LED lamp in FRP/Aluminium body including taking down of old unserviceable light fitting of any size/capacity complete all as specified and directed. System Comprises Followings :- 1. PV Panel 30W Monocrystalline. 2. Lithium Cell for back up 15.4AH with inbuilt BMS. 3. High brightness W-LED lamp 16W, CRI>700, CCT6500K. 4. Microcontroller based charge controller cum driver with automatic dimming function, Dusk to Dawn Operation. 5. Working temperature: (-) 10°C to (+) 55°C. System should be supplied with adjustable MS clamp and 40mm dia arm suitable for pole/wall mounting complete with satisfaction of Engineer In Charge.

S& F of decorative colour of 3 mtr length having pole material GI PU painted pipe and light material as polycarbonate acrylic of lenth as per halonix cat part no HLDC-45-75-TRI-3M with rated voltage and frequency 240v 150 hz system voltage 75 watt +- 10% system current <0.382 mA power factor > 0.90 colour output suffron,white and green (tiranga colour with same sequence) and driver efficiency >=80 % base plate of the pole light shall be of dia 300 mm and thickness 12 mm PCB hole 260mm dia & 25 mm dia light shall be mounted on a half feet pcc plaster properly fixed with plate and foundation bolt make-halonix, havells, bajaj, crompton or equivelent as approved by GE

AUTOMATION AND SWITCHGEAR PANELS (BID ID -3482490)

M/s Yash Electrical and Maintenance (BID ID -3477336)

DEMROT ELECTRICAL WORKS (BID ID -3477280)

S.R.Enterprises (BID ID -3482430)